ASoC/soundwire: bus: use property to set interrupt masks

Add a slave-level property and program the SCP_INT1_MASK as desired by
the codec driver. Since there is no DisCo property this has to be an
implementation-specific firmware property or hard-coded in the driver.

The only functionality change is that implementation-defined
interrupts are no longer set for amplifiers - those interrupts are
typically for jack detection or acoustic event detection/hotwording.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200908134521.6781-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Pierre-Louis Bossart 2020-09-08 21:45:15 +08:00 committed by Vinod Koul
parent 09309093d5
commit 2acd30b9f6
9 changed files with 30 additions and 6 deletions

View File

@ -1184,13 +1184,13 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
return ret;
/*
* Set bus clash, parity and SCP implementation
* defined interrupt mask
* TODO: Read implementation defined interrupt mask
* from Slave property
* Set SCP_INT1_MASK register, typically bus clash and
* implementation-defined interrupt mask. The Parity detection
* may not always be correct on startup so its use is
* device-dependent, it might e.g. only be enabled in
* steady-state after a couple of frames.
*/
val = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
SDW_SCP_INT1_PARITY;
val = slave->prop.scp_int1_mask;
/* Enable SCP interrupts */
ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val);

View File

@ -357,6 +357,7 @@ struct sdw_dpn_prop {
* @dp0_prop: Data Port 0 properties
* @src_dpn_prop: Source Data Port N properties
* @sink_dpn_prop: Sink Data Port N properties
* @scp_int1_mask: SCP_INT1_MASK desired settings
*/
struct sdw_slave_prop {
u32 mipi_revision;
@ -378,6 +379,7 @@ struct sdw_slave_prop {
struct sdw_dp0_prop *dp0_prop;
struct sdw_dpn_prop *src_dpn_prop;
struct sdw_dpn_prop *sink_dpn_prop;
u8 scp_int1_mask;
};
/**

View File

@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include <linux/soundwire/sdw_registers.h>
#include "max98373.h"
#include "max98373-sdw.h"
@ -287,6 +288,8 @@ static int max98373_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
/* BITMAP: 00001000 Dataport 3 is active */
prop->source_ports = BIT(3);
/* BITMAP: 00000010 Dataport 1 is active */

View File

@ -123,6 +123,8 @@ static int rt1308_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
prop->paging_support = true;
/* first we need to allocate memory for set bits in port lists */

View File

@ -19,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include <linux/soundwire/sdw_registers.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@ -542,6 +543,9 @@ static int rt5682_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
SDW_SCP_INT1_PARITY;
prop->paging_support = false;
/* first we need to allocate memory for set bits in port lists */

View File

@ -11,6 +11,7 @@
#include <linux/mod_devicetable.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <sound/soc.h>
@ -338,6 +339,9 @@ static int rt700_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
SDW_SCP_INT1_PARITY;
prop->paging_support = false;
/* first we need to allocate memory for set bits in port lists */

View File

@ -11,6 +11,7 @@
#include <linux/mod_devicetable.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <sound/soc.h>
@ -342,6 +343,9 @@ static int rt711_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
SDW_SCP_INT1_PARITY;
prop->paging_support = false;
/* first we need to allocate memory for set bits in port lists */

View File

@ -12,6 +12,7 @@
#include <linux/mod_devicetable.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_type.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
@ -436,6 +437,9 @@ static int rt715_read_prop(struct sdw_slave *slave)
unsigned long addr;
struct sdw_dpn_prop *dpn;
prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
SDW_SCP_INT1_PARITY;
prop->paging_support = false;
/* first we need to allocate memory for set bits in port lists */

View File

@ -1112,6 +1112,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
wsa881x->sconfig.type = SDW_STREAM_PDM;
pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
gpiod_direction_output(wsa881x->sd_n, 1);
wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);