mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 02:30:52 +07:00
leds: netxbig: add device tree binding
This patch adds device tree support for the netxbig LEDs. This also introduces a additionnal DT binding for the GPIO extension bus (netxbig-gpio-ext) used to configure the LEDs. Since this bus could also be used to control other devices, then it seems more suitable to have it in a separate DT binding. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
This commit is contained in:
parent
1c7b9d0edf
commit
2976b17989
22
Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
Normal file
22
Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
Normal file
@ -0,0 +1,22 @@
|
||||
Binding for the GPIO extension bus found on some LaCie/Seagate boards
|
||||
(Example: 2Big/5Big Network v2, 2Big NAS).
|
||||
|
||||
Required properties:
|
||||
- compatible: "lacie,netxbig-gpio-ext".
|
||||
- addr-gpios: GPIOs representing the address register (LSB -> MSB).
|
||||
- data-gpios: GPIOs representing the data register (LSB -> MSB).
|
||||
- enable-gpio: latches the new configuration (address, data) on raising edge.
|
||||
|
||||
Example:
|
||||
|
||||
netxbig_gpio_ext: netxbig-gpio-ext {
|
||||
compatible = "lacie,netxbig-gpio-ext";
|
||||
|
||||
addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
|
||||
&gpio1 16 GPIO_ACTIVE_HIGH
|
||||
&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
|
||||
&gpio1 13 GPIO_ACTIVE_HIGH
|
||||
&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
92
Documentation/devicetree/bindings/leds/leds-netxbig.txt
Normal file
92
Documentation/devicetree/bindings/leds/leds-netxbig.txt
Normal file
@ -0,0 +1,92 @@
|
||||
Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
|
||||
boards (Example: 2Big/5Big Network v2, 2Big NAS).
|
||||
|
||||
Required properties:
|
||||
- compatible: "lacie,netxbig-leds".
|
||||
- gpio-ext: Phandle for the gpio-ext bus.
|
||||
|
||||
Optional properties:
|
||||
- timers: Timer array. Each timer entry is represented by three integers:
|
||||
Mode (gpio-ext bus), delay_on and delay_off.
|
||||
|
||||
Each LED is represented as a sub-node of the netxbig-leds device.
|
||||
|
||||
Required sub-node properties:
|
||||
- mode-addr: Mode register address on gpio-ext bus.
|
||||
- mode-val: Mode to value mapping. Each entry is represented by two integers:
|
||||
A mode and the corresponding value on the gpio-ext bus.
|
||||
- bright-addr: Brightness register address on gpio-ext bus.
|
||||
- max-brightness: Maximum brightness value.
|
||||
|
||||
Optional sub-node properties:
|
||||
- label: Name for this LED. If omitted, the label is taken from the node name.
|
||||
- linux,default-trigger: Trigger assigned to the LED.
|
||||
|
||||
Example:
|
||||
|
||||
netxbig-leds {
|
||||
compatible = "lacie,netxbig-leds";
|
||||
|
||||
gpio-ext = &gpio_ext;
|
||||
|
||||
timers = <NETXBIG_LED_TIMER1 500 500
|
||||
NETXBIG_LED_TIMER2 500 1000>;
|
||||
|
||||
blue-power {
|
||||
label = "netxbig:blue:power";
|
||||
mode-addr = <0>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 1
|
||||
NETXBIG_LED_TIMER1 3
|
||||
NETXBIG_LED_TIMER2 7>;
|
||||
bright-addr = <1>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-power {
|
||||
label = "netxbig:red:power";
|
||||
mode-addr = <0>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <1>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
blue-sata0 {
|
||||
label = "netxbig:blue:sata0";
|
||||
mode-addr = <3>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 7
|
||||
NETXBIG_LED_SATA 1
|
||||
NETXBIG_LED_TIMER1 3>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-sata0 {
|
||||
label = "netxbig:red:sata0";
|
||||
mode-addr = <3>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
blue-sata1 {
|
||||
label = "netxbig:blue:sata1";
|
||||
mode-addr = <4>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 7
|
||||
NETXBIG_LED_SATA 1
|
||||
NETXBIG_LED_TIMER1 3>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-sata1 {
|
||||
label = "netxbig:red:sata1";
|
||||
mode-addr = <4>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
};
|
@ -26,6 +26,7 @@
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/platform_data/leds-kirkwood-netxbig.h>
|
||||
|
||||
@ -140,6 +141,11 @@ struct netxbig_led_data {
|
||||
spinlock_t lock;
|
||||
};
|
||||
|
||||
struct netxbig_led_priv {
|
||||
struct netxbig_led_platform_data *pdata;
|
||||
struct netxbig_led_data leds_data[];
|
||||
};
|
||||
|
||||
static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
|
||||
unsigned long delay_on,
|
||||
unsigned long delay_off,
|
||||
@ -304,12 +310,12 @@ static void delete_netxbig_led(struct netxbig_led_data *led_dat)
|
||||
led_classdev_unregister(&led_dat->cdev);
|
||||
}
|
||||
|
||||
static int
|
||||
create_netxbig_led(struct platform_device *pdev,
|
||||
struct netxbig_led_data *led_dat,
|
||||
const struct netxbig_led *template)
|
||||
static int create_netxbig_led(struct platform_device *pdev, int led,
|
||||
struct netxbig_led_priv *priv)
|
||||
{
|
||||
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
||||
struct netxbig_led_platform_data *pdata = priv->pdata;
|
||||
struct netxbig_led_data *led_dat = &priv->leds_data[led];
|
||||
const struct netxbig_led *template = &priv->pdata->leds[led];
|
||||
|
||||
spin_lock_init(&led_dat->lock);
|
||||
led_dat->gpio_ext = pdata->gpio_ext;
|
||||
@ -333,7 +339,7 @@ create_netxbig_led(struct platform_device *pdev,
|
||||
led_dat->mode_addr = template->mode_addr;
|
||||
led_dat->mode_val = template->mode_val;
|
||||
led_dat->bright_addr = template->bright_addr;
|
||||
led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1;
|
||||
led_dat->bright_max = template->bright_max;
|
||||
led_dat->timer = pdata->timer;
|
||||
led_dat->num_timer = pdata->num_timer;
|
||||
/*
|
||||
@ -346,38 +352,269 @@ create_netxbig_led(struct platform_device *pdev,
|
||||
return led_classdev_register(&pdev->dev, &led_dat->cdev);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF_GPIO
|
||||
static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
|
||||
struct netxbig_gpio_ext *gpio_ext)
|
||||
{
|
||||
int *addr, *data;
|
||||
int num_addr, num_data;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
ret = of_gpio_named_count(np, "addr-gpios");
|
||||
if (ret < 0) {
|
||||
dev_err(dev,
|
||||
"Failed to count GPIOs in DT property addr-gpios\n");
|
||||
return ret;
|
||||
}
|
||||
num_addr = ret;
|
||||
addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
|
||||
if (!addr)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < num_addr; i++) {
|
||||
ret = of_get_named_gpio(np, "addr-gpios", i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
addr[i] = ret;
|
||||
}
|
||||
gpio_ext->addr = addr;
|
||||
gpio_ext->num_addr = num_addr;
|
||||
|
||||
ret = of_gpio_named_count(np, "data-gpios");
|
||||
if (ret < 0) {
|
||||
dev_err(dev,
|
||||
"Failed to count GPIOs in DT property data-gpios\n");
|
||||
return ret;
|
||||
}
|
||||
num_data = ret;
|
||||
data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < num_data; i++) {
|
||||
ret = of_get_named_gpio(np, "data-gpios", i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
data[i] = ret;
|
||||
}
|
||||
gpio_ext->data = data;
|
||||
gpio_ext->num_data = num_data;
|
||||
|
||||
ret = of_get_named_gpio(np, "enable-gpio", 0);
|
||||
if (ret < 0) {
|
||||
dev_err(dev,
|
||||
"Failed to get GPIO from DT property enable-gpio\n");
|
||||
return ret;
|
||||
}
|
||||
gpio_ext->enable = ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int netxbig_leds_get_of_pdata(struct device *dev,
|
||||
struct netxbig_led_platform_data *pdata)
|
||||
{
|
||||
struct device_node *np = dev->of_node;
|
||||
struct device_node *gpio_ext_np;
|
||||
struct device_node *child;
|
||||
struct netxbig_gpio_ext *gpio_ext;
|
||||
struct netxbig_led_timer *timers;
|
||||
struct netxbig_led *leds, *led;
|
||||
int num_timers;
|
||||
int num_leds = 0;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
/* GPIO extension */
|
||||
gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
|
||||
if (!gpio_ext_np) {
|
||||
dev_err(dev, "Failed to get DT handle gpio-ext\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
|
||||
if (!gpio_ext)
|
||||
return -ENOMEM;
|
||||
ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
|
||||
if (ret)
|
||||
return ret;
|
||||
of_node_put(gpio_ext_np);
|
||||
pdata->gpio_ext = gpio_ext;
|
||||
|
||||
/* Timers (optional) */
|
||||
ret = of_property_count_u32_elems(np, "timers");
|
||||
if (ret > 0) {
|
||||
if (ret % 3)
|
||||
return -EINVAL;
|
||||
num_timers = ret / 3;
|
||||
timers = devm_kzalloc(dev, num_timers * sizeof(*timers),
|
||||
GFP_KERNEL);
|
||||
if (!timers)
|
||||
return -ENOMEM;
|
||||
for (i = 0; i < num_timers; i++) {
|
||||
u32 tmp;
|
||||
|
||||
of_property_read_u32_index(np, "timers", 3 * i,
|
||||
&timers[i].mode);
|
||||
if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
|
||||
return -EINVAL;
|
||||
of_property_read_u32_index(np, "timers",
|
||||
3 * i + 1, &tmp);
|
||||
timers[i].delay_on = tmp;
|
||||
of_property_read_u32_index(np, "timers",
|
||||
3 * i + 2, &tmp);
|
||||
timers[i].delay_off = tmp;
|
||||
}
|
||||
pdata->timer = timers;
|
||||
pdata->num_timer = num_timers;
|
||||
}
|
||||
|
||||
/* LEDs */
|
||||
num_leds = of_get_child_count(np);
|
||||
if (!num_leds) {
|
||||
dev_err(dev, "No LED subnodes found in DT\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL);
|
||||
if (!leds)
|
||||
return -ENOMEM;
|
||||
|
||||
led = leds;
|
||||
for_each_child_of_node(np, child) {
|
||||
const char *string;
|
||||
int *mode_val;
|
||||
int num_modes;
|
||||
|
||||
ret = of_property_read_u32(child, "mode-addr",
|
||||
&led->mode_addr);
|
||||
if (ret)
|
||||
goto err_node_put;
|
||||
|
||||
ret = of_property_read_u32(child, "bright-addr",
|
||||
&led->bright_addr);
|
||||
if (ret)
|
||||
goto err_node_put;
|
||||
|
||||
ret = of_property_read_u32(child, "max-brightness",
|
||||
&led->bright_max);
|
||||
if (ret)
|
||||
goto err_node_put;
|
||||
|
||||
mode_val =
|
||||
devm_kzalloc(dev,
|
||||
NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
|
||||
GFP_KERNEL);
|
||||
if (!mode_val) {
|
||||
ret = -ENOMEM;
|
||||
goto err_node_put;
|
||||
}
|
||||
|
||||
for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
|
||||
mode_val[i] = NETXBIG_LED_INVALID_MODE;
|
||||
|
||||
ret = of_property_count_u32_elems(child, "mode-val");
|
||||
if (ret < 0 || ret % 2) {
|
||||
ret = -EINVAL;
|
||||
goto err_node_put;
|
||||
}
|
||||
num_modes = ret / 2;
|
||||
if (num_modes > NETXBIG_LED_MODE_NUM) {
|
||||
ret = -EINVAL;
|
||||
goto err_node_put;
|
||||
}
|
||||
|
||||
for (i = 0; i < num_modes; i++) {
|
||||
int mode;
|
||||
int val;
|
||||
|
||||
of_property_read_u32_index(child,
|
||||
"mode-val", 2 * i, &mode);
|
||||
of_property_read_u32_index(child,
|
||||
"mode-val", 2 * i + 1, &val);
|
||||
if (mode >= NETXBIG_LED_MODE_NUM) {
|
||||
ret = -EINVAL;
|
||||
goto err_node_put;
|
||||
}
|
||||
mode_val[mode] = val;
|
||||
}
|
||||
led->mode_val = mode_val;
|
||||
|
||||
if (!of_property_read_string(child, "label", &string))
|
||||
led->name = string;
|
||||
else
|
||||
led->name = child->name;
|
||||
|
||||
if (!of_property_read_string(child,
|
||||
"linux,default-trigger", &string))
|
||||
led->default_trigger = string;
|
||||
|
||||
led++;
|
||||
}
|
||||
|
||||
pdata->leds = leds;
|
||||
pdata->num_leds = num_leds;
|
||||
|
||||
return 0;
|
||||
|
||||
err_node_put:
|
||||
of_node_put(child);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct of_device_id of_netxbig_leds_match[] = {
|
||||
{ .compatible = "lacie,netxbig-leds", },
|
||||
{},
|
||||
};
|
||||
#else
|
||||
static inline int
|
||||
netxbig_leds_get_of_pdata(struct device *dev,
|
||||
struct netxbig_led_platform_data *pdata)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif /* CONFIG_OF_GPIO */
|
||||
|
||||
static int netxbig_led_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
||||
struct netxbig_led_data *leds_data;
|
||||
struct netxbig_led_priv *priv;
|
||||
int i;
|
||||
int ret;
|
||||
|
||||
if (!pdata)
|
||||
return -EINVAL;
|
||||
if (!pdata) {
|
||||
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!pdata)
|
||||
return -ENOMEM;
|
||||
ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
leds_data = devm_kzalloc(&pdev->dev,
|
||||
sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
|
||||
if (!leds_data)
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
|
||||
pdata->num_leds * sizeof(struct netxbig_led_data),
|
||||
GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
priv->pdata = pdata;
|
||||
|
||||
ret = gpio_ext_init(pdata->gpio_ext);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < pdata->num_leds; i++) {
|
||||
ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
|
||||
ret = create_netxbig_led(pdev, i, priv);
|
||||
if (ret < 0)
|
||||
goto err_free_leds;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, leds_data);
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_leds:
|
||||
for (i = i - 1; i >= 0; i--)
|
||||
delete_netxbig_led(&leds_data[i]);
|
||||
delete_netxbig_led(&priv->leds_data[i]);
|
||||
|
||||
gpio_ext_free(pdata->gpio_ext);
|
||||
return ret;
|
||||
@ -385,14 +622,12 @@ static int netxbig_led_probe(struct platform_device *pdev)
|
||||
|
||||
static int netxbig_led_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
||||
struct netxbig_led_data *leds_data;
|
||||
struct netxbig_led_priv *priv = platform_get_drvdata(pdev);
|
||||
struct netxbig_led_platform_data *pdata = priv->pdata;
|
||||
int i;
|
||||
|
||||
leds_data = platform_get_drvdata(pdev);
|
||||
|
||||
for (i = 0; i < pdata->num_leds; i++)
|
||||
delete_netxbig_led(&leds_data[i]);
|
||||
delete_netxbig_led(&priv->leds_data[i]);
|
||||
|
||||
gpio_ext_free(pdata->gpio_ext);
|
||||
|
||||
@ -403,7 +638,8 @@ static struct platform_driver netxbig_led_driver = {
|
||||
.probe = netxbig_led_probe,
|
||||
.remove = netxbig_led_remove,
|
||||
.driver = {
|
||||
.name = "leds-netxbig",
|
||||
.name = "leds-netxbig",
|
||||
.of_match_table = of_match_ptr(of_netxbig_leds_match),
|
||||
},
|
||||
};
|
||||
|
||||
|
18
include/dt-bindings/leds/leds-netxbig.h
Normal file
18
include/dt-bindings/leds/leds-netxbig.h
Normal file
@ -0,0 +1,18 @@
|
||||
/*
|
||||
* This header provides constants for netxbig LED bindings.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
|
||||
#define _DT_BINDINGS_LEDS_NETXBIG_H
|
||||
|
||||
#define NETXBIG_LED_OFF 0
|
||||
#define NETXBIG_LED_ON 1
|
||||
#define NETXBIG_LED_SATA 2
|
||||
#define NETXBIG_LED_TIMER1 3
|
||||
#define NETXBIG_LED_TIMER2 4
|
||||
|
||||
#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */
|
@ -40,6 +40,7 @@ struct netxbig_led {
|
||||
int mode_addr;
|
||||
int *mode_val;
|
||||
int bright_addr;
|
||||
int bright_max;
|
||||
};
|
||||
|
||||
struct netxbig_led_platform_data {
|
||||
|
Loading…
Reference in New Issue
Block a user