ACPI / EC: Restart transaction even when the IBF flag set

The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.

Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status.  Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.

This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: All <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Lan Tianyu 2013-05-06 03:23:40 +00:00 committed by Rafael J. Wysocki
parent 4ef366c583
commit 28fe5c825f

View File

@ -223,7 +223,7 @@ static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
static int ec_poll(struct acpi_ec *ec) static int ec_poll(struct acpi_ec *ec)
{ {
unsigned long flags; unsigned long flags;
int repeat = 2; /* number of command restarts */ int repeat = 5; /* number of command restarts */
while (repeat--) { while (repeat--) {
unsigned long delay = jiffies + unsigned long delay = jiffies +
msecs_to_jiffies(ec_delay); msecs_to_jiffies(ec_delay);
@ -241,8 +241,6 @@ static int ec_poll(struct acpi_ec *ec)
} }
advance_transaction(ec, acpi_ec_read_status(ec)); advance_transaction(ec, acpi_ec_read_status(ec));
} while (time_before(jiffies, delay)); } while (time_before(jiffies, delay));
if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
break;
pr_debug(PREFIX "controller reset, restart transaction\n"); pr_debug(PREFIX "controller reset, restart transaction\n");
spin_lock_irqsave(&ec->lock, flags); spin_lock_irqsave(&ec->lock, flags);
start_transaction(ec); start_transaction(ec);