From 2399d6143f85b155ae84ccd94237befd36b8f6c7 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 20 Oct 2016 09:32:19 -0700 Subject: [PATCH] net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels For a kernel that is being kexec'd we re-enable the integrated GPHY in order for the subsequent MDIO bus scan to succeed and properly bind to the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut down by the time the MDIO driver is probing the bus, and it would fail to read the correct PHY OUI and therefore bind to an appropriate PHY driver. Later on, this would cause DSA not to be able to successfully attach to the PHY, and the interface would not be created at all. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 0427009bc924..077a24541584 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "bcm_sf2.h" #include "bcm_sf2_regs.h" @@ -1133,6 +1134,18 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) return 0; } +static void bcm_sf2_sw_shutdown(struct platform_device *pdev) +{ + struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); + + /* For a kernel about to be kexec'd we want to keep the GPHY on for a + * successful MDIO bus scan to occur. If we did turn off the GPHY + * before (e.g: port_disable), this will also power it back on. + */ + if (priv->hw_params.num_gphy == 1) + bcm_sf2_gphy_enable_set(priv->dev->ds, kexec_in_progress); +} + #ifdef CONFIG_PM_SLEEP static int bcm_sf2_suspend(struct device *dev) { @@ -1163,6 +1176,7 @@ MODULE_DEVICE_TABLE(of, bcm_sf2_of_match); static struct platform_driver bcm_sf2_driver = { .probe = bcm_sf2_sw_probe, .remove = bcm_sf2_sw_remove, + .shutdown = bcm_sf2_sw_shutdown, .driver = { .name = "brcm-sf2", .of_match_table = bcm_sf2_of_match,