AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 22:46:41 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

ASoC: rt5677: Enable jack detect while DSP is running

Browse Source 
Before a hotword is detected, GPIO1 pin is configured as IRQ
output so that jack detect works. When a hotword is detected,
the DSP firmware configures the GPIO1 pin as GPIO1 and
drives a 1. rt5677_irq() is called after a rising edge on
the GPIO1 pin, due to either jack detect event or hotword
event, or both. All possible events are checked and handled
in rt5677_irq() where GPIO1 pin is configured back to IRQ
output if a hotword is detected.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-4-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Ben Zhang 2019-11-05 17:13:28 -08:00 committed by Mark Brown
parent 157b006f6b
commit 21c00e5df4
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 48 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
sound/soc/codecs/rt5677.c
View File

@ -312,6 +312,8 @@ static bool rt5677_volatile_register(struct device *dev, unsigned int reg)
case RT5677_IRQ_CTRL1:
case RT5677_IRQ_CTRL2:
case RT5677_GPIO_ST:
case RT5677_GPIO_CTRL1: /* Modified by DSP firmware */
case RT5677_GPIO_CTRL2: /* Modified by DSP firmware */
case RT5677_DSP_INB1_SRC_CTRL4:
case RT5677_DSP_INB2_SRC_CTRL4:
case RT5677_DSP_INB3_SRC_CTRL4:
@ -746,8 +748,11 @@ static unsigned int rt5677_set_vad_source(struct rt5677_priv *rt5677)
RT5677_VAD_BUF_OW | RT5677_VAD_FG2ENC |
RT5677_VAD_ADPCM_BYPASS | 1 << RT5677_VAD_MIN_DUR_SFT);
/* IRQ Source of VAD Jack Detection = enable */
regmap_write(rt5677->regmap, RT5677_IRQ_CTRL2, 0x4000);
/* VAD/SAD is not routed to the IRQ output (i.e. MX-BE[14] = 0), but it
* is routed to DSP_IRQ_0, so DSP firmware may use it to sleep and save
* power. See ALC5677 datasheet section 9.17 "GPIO, Interrupt and Jack
* Detection" for more info.
*/
/* Private register, no doc */
regmap_update_bits(rt5677->regmap, RT5677_PR_BASE + RT5677_BIAS_CUR4,
@ -886,15 +891,15 @@ static void rt5677_dsp_work(struct work_struct *work)
if (enable && !activity) {
activity = true;
/* Set GPIO1 as an output pin driving a 0. Firmware will
* raise GPIO1 upon hotword detect.
/* Before a hotword is detected, GPIO1 pin is configured as IRQ
* output so that jack detect works. When a hotword is detected,
* the DSP firmware configures the GPIO1 pin as GPIO1 and
* drives a 1. rt5677_irq() is called after a rising edge on
* the GPIO1 pin, due to either jack detect event or hotword
* event, or both. All possible events are checked and handled
* in rt5677_irq() where GPIO1 pin is configured back to IRQ
* output if a hotword is detected.
*/
regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL2,
RT5677_GPIO1_DIR_MASK | RT5677_GPIO1_OUT_MASK |
RT5677_GPIO1_P_MASK, RT5677_GPIO1_DIR_OUT |
RT5677_GPIO1_OUT_LO | RT5677_GPIO1_P_NOR);
regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL1,
RT5677_GPIO1_PIN_MASK, RT5677_GPIO1_PIN_GPIO1);
rt5677_set_vad_source(rt5677);
rt5677_set_dsp_mode(rt5677, true);
@ -915,6 +920,8 @@ static void rt5677_dsp_work(struct work_struct *work)
} else if (!enable && activity) {
activity = false;
/* Don't turn off the DSP while handling irqs */
mutex_lock(&rt5677->irq_lock);
/* Set DSP CPU to Stop */
regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1,
RT5677_PWR_DSP_CPU, RT5677_PWR_DSP_CPU);
@ -923,13 +930,12 @@ static void rt5677_dsp_work(struct work_struct *work)
/* Disable and clear VAD interrupt */
regmap_write(rt5677->regmap, RT5677_VAD_CTRL1, 0x2184);
regmap_update_bits(rt5677->regmap, RT5677_IRQ_CTRL2,
0xF000, 0x0000);
/* Set GPIO1 pin back to be IRQ output for jack detect */
regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL1,
RT5677_GPIO1_PIN_MASK, RT5677_GPIO1_PIN_IRQ);
mutex_unlock(&rt5677->irq_lock);
}
}
@ -5237,6 +5243,28 @@ static const struct rt5677_irq_desc rt5677_irq_descs[] = {
},
};
bool rt5677_check_hotword(struct rt5677_priv *rt5677)
{
int reg_gpio;
if (!rt5677->is_dsp_mode)
return false;
if (regmap_read(rt5677->regmap, RT5677_GPIO_CTRL1, &reg_gpio))
return false;
/* Firmware sets GPIO1 pin to be GPIO1 after hotword is detected */
if ((reg_gpio & RT5677_GPIO1_PIN_MASK) == RT5677_GPIO1_PIN_IRQ)
return false;
/* Set GPIO1 pin back to be IRQ output for jack detect */
regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL1,
RT5677_GPIO1_PIN_MASK, RT5677_GPIO1_PIN_IRQ);
rt5677_spi_hotword_detected();
return true;
}
static irqreturn_t rt5677_irq(int unused, void *data)
{
struct rt5677_priv *rt5677 = data;
@ -5245,9 +5273,6 @@ static irqreturn_t rt5677_irq(int unused, void *data)
mutex_lock(&rt5677->irq_lock);
if (rt5677->dsp_vad_en)
rt5677_spi_hotword_detected();
/*
* Loop to handle interrupts until the last i2c read shows no pending
* irqs. The interrupt line is shared by multiple interrupt sources.
@ -5285,7 +5310,13 @@ static irqreturn_t rt5677_irq(int unused, void *data)
reg_irq ^= rt5677_irq_descs[i].polarity_mask;
}
}
if (!irq_fired)
/* Exit the loop only when we know for sure that GPIO1 pin
* was low at some point since irq_lock was acquired. Any event
* after that point creates a rising edge that triggers another
* call to rt5677_irq().
*/
if (!irq_fired && !rt5677_check_hotword(rt5677))
goto exit;
ret = regmap_write(rt5677->regmap, RT5677_IRQ_CTRL1, reg_irq);
@ -5296,6 +5327,7 @@ static irqreturn_t rt5677_irq(int unused, void *data)
}
}
exit:
WARN_ON_ONCE(loop == 20);
mutex_unlock(&rt5677->irq_lock);
if (irq_fired)
return IRQ_HANDLED;