mtd: spi-nor: Use nor->params

The Flash parameters and settings are now stored in 'struct spi_nor'.
Use this instead of the stack allocated params.

Few functions stop passing pointer to params, as they can get it from
'struct spi_nor'. spi_nor_parse_sfdp() and children will keep passing
pointer to params because of the roll-back mechanism: in case the
parsing of SFDP fails, the legacy flash parameter and settings will be
restored.

Zeroing params is no longer needed because all SPI NOR users kzalloc
'struct spi_nor'.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
This commit is contained in:
Tudor Ambarus 2019-08-23 15:53:37 +00:00
parent 47599127a2
commit 1e35a56781
No known key found for this signature in database
GPG Key ID: 4B554F47A58D14E9

View File

@ -2974,16 +2974,13 @@ static int spi_nor_spimem_check_pp(struct spi_nor *nor,
* spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
* based on SPI controller capabilities
* @nor: pointer to a 'struct spi_nor'
* @params: pointer to the 'struct spi_nor_flash_parameter'
* representing SPI NOR flash capabilities
* @hwcaps: pointer to resulting capabilities after adjusting
* according to controller and flash's capability
*/
static void
spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
u32 *hwcaps)
spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
{
struct spi_nor_flash_parameter *params = &nor->params;
unsigned int cap;
/* DTR modes are not supported yet, mask them all. */
@ -4129,16 +4126,13 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
return err;
}
static int spi_nor_init_params(struct spi_nor *nor,
struct spi_nor_flash_parameter *params)
static int spi_nor_init_params(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = &nor->params;
struct spi_nor_erase_map *map = &nor->erase_map;
const struct flash_info *info = nor->info;
u8 i, erase_mask;
/* Set legacy flash parameters as default. */
memset(params, 0, sizeof(*params));
/* Set SPI NOR sizes. */
params->size = (u64)info->sector_size * info->n_sectors;
params->page_size = info->page_size;
@ -4255,7 +4249,6 @@ static int spi_nor_init_params(struct spi_nor *nor,
}
static int spi_nor_select_read(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
u32 shared_hwcaps)
{
int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
@ -4268,7 +4261,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
if (cmd < 0)
return -EINVAL;
read = &params->reads[cmd];
read = &nor->params.reads[cmd];
nor->read_opcode = read->opcode;
nor->read_proto = read->proto;
@ -4287,7 +4280,6 @@ static int spi_nor_select_read(struct spi_nor *nor,
}
static int spi_nor_select_pp(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
u32 shared_hwcaps)
{
int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
@ -4300,7 +4292,7 @@ static int spi_nor_select_pp(struct spi_nor *nor,
if (cmd < 0)
return -EINVAL;
pp = &params->page_programs[cmd];
pp = &nor->params.page_programs[cmd];
nor->program_opcode = pp->opcode;
nor->write_proto = pp->proto;
return 0;
@ -4407,9 +4399,9 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
}
static int spi_nor_setup(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
const struct spi_nor_hwcaps *hwcaps)
{
struct spi_nor_flash_parameter *params = &nor->params;
u32 ignored_mask, shared_mask;
bool enable_quad_io;
int err;
@ -4426,7 +4418,7 @@ static int spi_nor_setup(struct spi_nor *nor,
* need to discard some of them based on what the SPI
* controller actually supports (using spi_mem_supports_op()).
*/
spi_nor_spimem_adjust_hwcaps(nor, params, &shared_mask);
spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
} else {
/*
* SPI n-n-n protocols are not supported when the SPI
@ -4442,7 +4434,7 @@ static int spi_nor_setup(struct spi_nor *nor,
}
/* Select the (Fast) Read command. */
err = spi_nor_select_read(nor, params, shared_mask);
err = spi_nor_select_read(nor, shared_mask);
if (err) {
dev_err(nor->dev,
"can't select read settings supported by both the SPI controller and memory.\n");
@ -4450,7 +4442,7 @@ static int spi_nor_setup(struct spi_nor *nor,
}
/* Select the Page Program command. */
err = spi_nor_select_pp(nor, params, shared_mask);
err = spi_nor_select_pp(nor, shared_mask);
if (err) {
dev_err(nor->dev,
"can't select write settings supported by both the SPI controller and memory.\n");
@ -4553,11 +4545,11 @@ static const struct flash_info *spi_nor_match_id(const char *name)
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
struct spi_nor_flash_parameter params;
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
struct spi_nor_flash_parameter *params = &nor->params;
int ret;
int i;
@ -4639,7 +4631,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
nor->clear_sr_bp = spi_nor_clear_sr_bp;
/* Parse the Serial Flash Discoverable Parameters table. */
ret = spi_nor_init_params(nor, &params);
ret = spi_nor_init_params(nor);
if (ret)
return ret;
@ -4649,7 +4641,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->size = params.size;
mtd->size = params->size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
mtd->_resume = spi_nor_resume;
@ -4688,18 +4680,18 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
nor->page_size = params.page_size;
nor->page_size = params->page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
else
params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
} else {
/* If we weren't instantiated by DT, default to fast-read */
params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
}
if (of_property_read_bool(np, "broken-flash-reset"))
@ -4707,7 +4699,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
/*
* Configure the SPI memory:
@ -4716,7 +4708,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* - set the SPI protocols for register and memory accesses.
* - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
*/
ret = spi_nor_setup(nor, &params, hwcaps);
ret = spi_nor_setup(nor, hwcaps);
if (ret)
return ret;