mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 02:58:57 +07:00
staging: comedi: daqboard2000: rename register offset macros
Rename the macros defining register offsets to avoid CamelCase, and to use namespace associated with the driver. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ian Abbott
Greg Kroah-Hartman
parent
ff2ca4f0e8
commit
1e33538596
@ -151,35 +151,35 @@ static const struct comedi_lrange range_daqboard2000_ai = {
|
||||
/*
|
||||
* Register Memory Map
|
||||
*/
|
||||
#define acqControl 0x00 /* u16 */
|
||||
#define acqScanListFIFO 0x02 /* u16 */
|
||||
#define acqPacerClockDivLow 0x04 /* u32 */
|
||||
#define acqScanCounter 0x08 /* u16 */
|
||||
#define acqPacerClockDivHigh 0x0a /* u16 */
|
||||
#define acqTriggerCount 0x0c /* u16 */
|
||||
#define acqResultsFIFO 0x10 /* u16 */
|
||||
#define acqResultsShadow 0x14 /* u16 */
|
||||
#define acqAdcResult 0x18 /* u16 */
|
||||
#define dacScanCounter 0x1c /* u16 */
|
||||
#define dacControl 0x20 /* u16 */
|
||||
#define dacFIFO 0x24 /* s16 */
|
||||
#define dacPacerClockDiv 0x2a /* u16 */
|
||||
#define refDacs 0x2c /* u16 */
|
||||
#define dioControl 0x30 /* u16 */
|
||||
#define dioP3hsioData 0x32 /* s16 */
|
||||
#define dioP3Control 0x34 /* u16 */
|
||||
#define calEepromControl 0x36 /* u16 */
|
||||
#define dacSetting(x) (0x38 + (x) * 2) /* s16 */
|
||||
#define dioP2ExpansionIO8Bit 0x40 /* s16 */
|
||||
#define ctrTmrControl 0x80 /* u16 */
|
||||
#define ctrInput(x) (0x88 + (x) * 2) /* s16 */
|
||||
#define timerDivisor(x) (0xa0 + (x) * 2) /* u16 */
|
||||
#define dmaControl 0xb0 /* u16 */
|
||||
#define trigControl 0xb2 /* u16 */
|
||||
#define calEeprom 0xb8 /* u16 */
|
||||
#define acqDigitalMark 0xba /* u16 */
|
||||
#define trigDacs 0xbc /* u16 */
|
||||
#define dioP2ExpansionIO16Bit(x) (0xc0 + (x) * 2) /* s16 */
|
||||
#define DB2K_REG_ACQ_CONTROL 0x00 /* u16 */
|
||||
#define DB2K_REG_ACQ_SCAN_LIST_FIFO 0x02 /* u16 */
|
||||
#define DB2K_REG_ACQ_PACER_CLOCK_DIV_LOW 0x04 /* u32 */
|
||||
#define DB2K_REG_ACQ_SCAN_COUNTER 0x08 /* u16 */
|
||||
#define DB2K_REG_ACQ_PACER_CLOCK_DIV_HIGH 0x0a /* u16 */
|
||||
#define DB2K_REG_ACQ_TRIGGER_COUNT 0x0c /* u16 */
|
||||
#define DB2K_REG_ACQ_RESULTS_FIFO 0x10 /* u16 */
|
||||
#define DB2K_REG_ACQ_RESULTS_SHADOW 0x14 /* u16 */
|
||||
#define DB2K_REG_ACQ_ADC_RESULT 0x18 /* u16 */
|
||||
#define DB2K_REG_DAC_SCAN_COUNTER 0x1c /* u16 */
|
||||
#define DB2K_REG_DAC_CONTROL 0x20 /* u16 */
|
||||
#define DB2K_REG_DAC_FIFO 0x24 /* s16 */
|
||||
#define DB2K_REG_DAC_PACER_CLOCK_DIV 0x2a /* u16 */
|
||||
#define DB2K_REG_REF_DACS 0x2c /* u16 */
|
||||
#define DB2K_REG_DIO_CONTROL 0x30 /* u16 */
|
||||
#define DB2K_REG_P3_HSIO_DATA 0x32 /* s16 */
|
||||
#define DB2K_REG_P3_CONTROL 0x34 /* u16 */
|
||||
#define DB2K_REG_CAL_EEPROM_CONTROL 0x36 /* u16 */
|
||||
#define DB2K_REG_DAC_SETTING(x) (0x38 + (x) * 2) /* s16 */
|
||||
#define DB2K_REG_DIO_P2_EXP_IO_8_BIT 0x40 /* s16 */
|
||||
#define DB2K_REG_COUNTER_TIMER_CONTROL 0x80 /* u16 */
|
||||
#define DB2K_REG_COUNTER_INPUT(x) (0x88 + (x) * 2) /* s16 */
|
||||
#define DB2K_REG_TIMER_DIV(x) (0xa0 + (x) * 2) /* u16 */
|
||||
#define DB2K_REG_DMA_CONTROL 0xb0 /* u16 */
|
||||
#define DB2K_REG_TRIG_CONTROL 0xb2 /* u16 */
|
||||
#define DB2K_REG_CAL_EEPROM 0xb8 /* u16 */
|
||||
#define DB2K_REG_ACQ_DIGITAL_MARK 0xba /* u16 */
|
||||
#define DB2K_REG_TRIG_DACS 0xbc /* u16 */
|
||||
#define DB2K_REG_DIO_P2_EXP_IO_16_BIT(x) (0xc0 + (x) * 2) /* s16 */
|
||||
|
||||
/* Scan Sequencer programming */
|
||||
#define DAQBOARD2000_SeqStartScanList 0x0011
|
||||
@ -279,8 +279,9 @@ struct daqboard2000_private {
|
||||
|
||||
static void writeAcqScanListEntry(struct comedi_device *dev, u16 entry)
|
||||
{
|
||||
writew(entry & 0x00ff, dev->mmio + acqScanListFIFO);
|
||||
writew((entry >> 8) & 0x00ff, dev->mmio + acqScanListFIFO);
|
||||
writew(entry & 0x00ff, dev->mmio + DB2K_REG_ACQ_SCAN_LIST_FIFO);
|
||||
writew((entry >> 8) & 0x00ff,
|
||||
dev->mmio + DB2K_REG_ACQ_SCAN_LIST_FIFO);
|
||||
}
|
||||
|
||||
static void setup_sampling(struct comedi_device *dev, int chan, int gain)
|
||||
@ -330,7 +331,7 @@ static int daqboard2000_ai_status(struct comedi_device *dev,
|
||||
{
|
||||
unsigned int status;
|
||||
|
||||
status = readw(dev->mmio + acqControl);
|
||||
status = readw(dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
if (status & context)
|
||||
return 0;
|
||||
return -EBUSY;
|
||||
@ -347,15 +348,16 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
|
||||
|
||||
writew(DAQBOARD2000_AcqResetScanListFifo |
|
||||
DAQBOARD2000_AcqResetResultsFifo |
|
||||
DAQBOARD2000_AcqResetConfigPipe, dev->mmio + acqControl);
|
||||
DAQBOARD2000_AcqResetConfigPipe,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
|
||||
/*
|
||||
* If pacer clock is not set to some high value (> 10 us), we
|
||||
* risk multiple samples to be put into the result FIFO.
|
||||
*/
|
||||
/* 1 second, should be long enough */
|
||||
writel(1000000, dev->mmio + acqPacerClockDivLow);
|
||||
writew(0, dev->mmio + acqPacerClockDivHigh);
|
||||
writel(1000000, dev->mmio + DB2K_REG_ACQ_PACER_CLOCK_DIV_LOW);
|
||||
writew(0, dev->mmio + DB2K_REG_ACQ_PACER_CLOCK_DIV_HIGH);
|
||||
|
||||
gain = CR_RANGE(insn->chanspec);
|
||||
chan = CR_CHAN(insn->chanspec);
|
||||
@ -369,14 +371,16 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
|
||||
for (i = 0; i < insn->n; i++) {
|
||||
setup_sampling(dev, chan, gain);
|
||||
/* Enable reading from the scanlist FIFO */
|
||||
writew(DAQBOARD2000_SeqStartScanList, dev->mmio + acqControl);
|
||||
writew(DAQBOARD2000_SeqStartScanList,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
|
||||
ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
|
||||
DAQBOARD2000_AcqConfigPipeFull);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
writew(DAQBOARD2000_AdcPacerEnable, dev->mmio + acqControl);
|
||||
writew(DAQBOARD2000_AdcPacerEnable,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
|
||||
ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
|
||||
DAQBOARD2000_AcqLogicScanning);
|
||||
@ -388,9 +392,11 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
data[i] = readw(dev->mmio + acqResultsFIFO);
|
||||
writew(DAQBOARD2000_AdcPacerDisable, dev->mmio + acqControl);
|
||||
writew(DAQBOARD2000_SeqStopScanList, dev->mmio + acqControl);
|
||||
data[i] = readw(dev->mmio + DB2K_REG_ACQ_RESULTS_FIFO);
|
||||
writew(DAQBOARD2000_AdcPacerDisable,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
writew(DAQBOARD2000_SeqStopScanList,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
}
|
||||
|
||||
return i;
|
||||
@ -404,7 +410,7 @@ static int daqboard2000_ao_eoc(struct comedi_device *dev,
|
||||
unsigned int chan = CR_CHAN(insn->chanspec);
|
||||
unsigned int status;
|
||||
|
||||
status = readw(dev->mmio + dacControl);
|
||||
status = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
|
||||
if ((status & ((chan + 1) * 0x0010)) == 0)
|
||||
return 0;
|
||||
return -EBUSY;
|
||||
@ -422,7 +428,7 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
|
||||
unsigned int val = data[i];
|
||||
int ret;
|
||||
|
||||
writew(val, dev->mmio + dacSetting(chan));
|
||||
writew(val, dev->mmio + DB2K_REG_DAC_SETTING(chan));
|
||||
|
||||
ret = comedi_timeout(dev, s, insn, daqboard2000_ao_eoc, 0);
|
||||
if (ret)
|
||||
@ -550,18 +556,20 @@ static void daqboard2000_adcDisarm(struct comedi_device *dev)
|
||||
/* Disable hardware triggers */
|
||||
udelay(2);
|
||||
writew(DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable,
|
||||
dev->mmio + trigControl);
|
||||
dev->mmio + DB2K_REG_TRIG_CONTROL);
|
||||
udelay(2);
|
||||
writew(DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable,
|
||||
dev->mmio + trigControl);
|
||||
dev->mmio + DB2K_REG_TRIG_CONTROL);
|
||||
|
||||
/* Stop the scan list FIFO from loading the configuration pipe */
|
||||
udelay(2);
|
||||
writew(DAQBOARD2000_SeqStopScanList, dev->mmio + acqControl);
|
||||
writew(DAQBOARD2000_SeqStopScanList,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
|
||||
/* Stop the pacer clock */
|
||||
udelay(2);
|
||||
writew(DAQBOARD2000_AdcPacerDisable, dev->mmio + acqControl);
|
||||
writew(DAQBOARD2000_AdcPacerDisable,
|
||||
dev->mmio + DB2K_REG_ACQ_CONTROL);
|
||||
|
||||
/* Stop the input dma (abort channel 1) */
|
||||
daqboard2000_adcStopDmaTransfer(dev);
|
||||
@ -573,18 +581,20 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
|
||||
int timeout;
|
||||
|
||||
/* Set the + reference dac value in the FPGA */
|
||||
writew(0x80 | DAQBOARD2000_PosRefDacSelect, dev->mmio + refDacs);
|
||||
writew(0x80 | DAQBOARD2000_PosRefDacSelect,
|
||||
dev->mmio + DB2K_REG_REF_DACS);
|
||||
for (timeout = 0; timeout < 20; timeout++) {
|
||||
val = readw(dev->mmio + dacControl);
|
||||
val = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
|
||||
if ((val & DAQBOARD2000_RefBusy) == 0)
|
||||
break;
|
||||
udelay(2);
|
||||
}
|
||||
|
||||
/* Set the - reference dac value in the FPGA */
|
||||
writew(0x80 | DAQBOARD2000_NegRefDacSelect, dev->mmio + refDacs);
|
||||
writew(0x80 | DAQBOARD2000_NegRefDacSelect,
|
||||
dev->mmio + DB2K_REG_REF_DACS);
|
||||
for (timeout = 0; timeout < 20; timeout++) {
|
||||
val = readw(dev->mmio + dacControl);
|
||||
val = readw(dev->mmio + DB2K_REG_DAC_CONTROL);
|
||||
if ((val & DAQBOARD2000_RefBusy) == 0)
|
||||
break;
|
||||
udelay(2);
|
||||
@ -711,7 +721,7 @@ static int daqboard2000_auto_attach(struct comedi_device *dev,
|
||||
|
||||
s = &dev->subdevices[2];
|
||||
return subdev_8255_init(dev, s, daqboard2000_8255_cb,
|
||||
dioP2ExpansionIO8Bit);
|
||||
DB2K_REG_DIO_P2_EXP_IO_8_BIT);
|
||||
}
|
||||
|
||||
static void daqboard2000_detach(struct comedi_device *dev)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user