From 1e15687ea472614d48416c53bebcf213c07a5532 Mon Sep 17 00:00:00 2001 From: Chase Southwood Date: Sat, 21 Jun 2014 17:25:58 -0500 Subject: [PATCH] staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions This board supports an interrupt that can be generated by an AND/OR combination of 16 of the input channels. Create a separate subdevice to handle this interrupt. The apci1564_di_config() function is used to configure which inputs are used to generate the interrupt. Currently this function is broken since it does not follow the comedi API for insn_config functions. Fix this function by implementing the config instruction INSN_CONFIG_DIGITAL_TRIG. Add the remaining subdevice operations necessary for the interrupt subdevice to support async commands. Signed-off-by: Chase Southwood Reviewed-by: Ian Abbott Cc: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- .../comedi/drivers/addi-data/hwdrv_apci1564.c | 44 +-- .../staging/comedi/drivers/addi_apci_1564.c | 250 ++++++++++++++++-- 2 files changed, 232 insertions(+), 62 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c index 14714fe9a0c7..fbd0e1638984 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c @@ -26,12 +26,12 @@ #define APCI1564_ADDRESS_RANGE 128 /* Digital Input IRQ Function Selection */ -#define ADDIDATA_OR 0 -#define ADDIDATA_AND 1 +#define APCI1564_DI_INT_OR (0 << 1) +#define APCI1564_DI_INT_AND (1 << 1) /* Digital Input Interrupt Enable Disable. */ -#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4 -#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xfffffffb +#define APCI1564_DI_INT_ENABLE 0x4 +#define APCI1564_DI_INT_DISABLE 0xfffffffb /* Digital Output Interrupt Enable Disable. */ #define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1 @@ -89,42 +89,6 @@ #define APCI1564_TCW_WARN_TIMEVAL_REG(x) (0x18 + ((x) * 0x20)) #define APCI1564_TCW_WARN_TIMEBASE_REG(x) (0x1c + ((x) * 0x20)) -/* - * Configures the digital input Subdevice - * - * data[0] 1 = Enable interrupt, 0 = Disable interrupt - * data[1] 0 = ADDIDATA Interrupt OR LOGIC, 1 = ADDIDATA Interrupt AND LOGIC - * data[2] Interrupt mask for the mode 1 - * data[3] Interrupt mask for the mode 2 - */ -static int apci1564_di_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct apci1564_private *devpriv = dev->private; - - devpriv->tsk_current = current; - - /* Set the digital input logic */ - if (data[0] == 1) { - data[2] = data[2] << 4; - data[3] = data[3] << 4; - outl(data[2], devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG); - outl(data[3], devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG); - if (data[1] == ADDIDATA_OR) - outl(0x4, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); - else - outl(0x6, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); - } else { - outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG); - outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG); - outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); - } - - return insn->n; -} - /* * Configures The Digital Output Subdevice. * diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c index 1971da361b1d..fec478c6cf40 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1564.c +++ b/drivers/staging/comedi/drivers/addi_apci_1564.c @@ -8,6 +8,9 @@ struct apci1564_private { unsigned int amcc_iobase; /* base of AMCC I/O registers */ + unsigned int mode1; /* riding-edge/high level channels */ + unsigned int mode2; /* falling-edge/low level channels */ + unsigned int ctrl; /* interrupt mode OR (edge) . AND (level) */ unsigned int do_int_type; unsigned char timer_select_mode; unsigned char mode_select_register; @@ -16,6 +19,38 @@ struct apci1564_private { #include "addi-data/hwdrv_apci1564.c" +static int apci1564_reset(struct comedi_device *dev) +{ + struct apci1564_private *devpriv = dev->private; + + devpriv->do_int_type = 0; + + /* Disable the input interrupts and reset status register */ + outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); + inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG); + outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG); + outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG); + + /* Reset the output channels and disable interrupts */ + outl(0x0, devpriv->amcc_iobase + APCI1564_DO_REG); + outl(0x0, devpriv->amcc_iobase + APCI1564_DO_INT_CTRL_REG); + + /* Reset the watchdog registers */ + addi_watchdog_reset(devpriv->amcc_iobase + APCI1564_WDOG_REG); + + /* Reset the timer registers */ + outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_CTRL_REG); + outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_RELOAD_REG); + + /* Reset the counter registers */ + outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1)); + outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2)); + outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3)); + outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4)); + + return 0; +} + static irqreturn_t v_ADDI_Interrupt(int irq, void *d) { apci1564_interrupt(irq, d); @@ -51,35 +86,188 @@ static int apci1564_do_insn_bits(struct comedi_device *dev, return insn->n; } -static int apci1564_reset(struct comedi_device *dev) +/* + * Change-Of-State (COS) interrupt configuration + * + * Channels 0 to 15 are interruptible. These channels can be configured + * to generate interrupts based on AND/OR logic for the desired channels. + * + * OR logic + * - reacts to rising or falling edges + * - interrupt is generated when any enabled channel + * meet the desired interrupt condition + * + * AND logic + * - reacts to changes in level of the selected inputs + * - interrupt is generated when all enabled channels + * meet the desired interrupt condition + * - after an interrupt, a change in level must occur on + * the selected inputs to release the IRQ logic + * + * The COS interrupt must be configured before it can be enabled. + * + * data[0] : INSN_CONFIG_DIGITAL_TRIG + * data[1] : trigger number (= 0) + * data[2] : configuration operation: + * COMEDI_DIGITAL_TRIG_DISABLE = no interrupts + * COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts + * COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts + * data[3] : left-shift for data[4] and data[5] + * data[4] : rising-edge/high level channels + * data[5] : falling-edge/low level channels + */ +static int apci1564_cos_insn_config(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + struct apci1564_private *devpriv = dev->private; + unsigned int shift, oldmask; + + switch (data[0]) { + case INSN_CONFIG_DIGITAL_TRIG: + if (data[1] != 0) + return -EINVAL; + shift = data[3]; + oldmask = (1U << shift) - 1; + switch (data[2]) { + case COMEDI_DIGITAL_TRIG_DISABLE: + devpriv->ctrl = 0; + devpriv->mode1 = 0; + devpriv->mode2 = 0; + apci1564_reset(dev); + break; + case COMEDI_DIGITAL_TRIG_ENABLE_EDGES: + if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE | + APCI1564_DI_INT_OR)) { + /* switching to 'OR' mode */ + devpriv->ctrl = APCI1564_DI_INT_ENABLE | + APCI1564_DI_INT_OR; + /* wipe old channels */ + devpriv->mode1 = 0; + devpriv->mode2 = 0; + } else { + /* preserve unspecified channels */ + devpriv->mode1 &= oldmask; + devpriv->mode2 &= oldmask; + } + /* configure specified channels */ + devpriv->mode1 |= data[4] << shift; + devpriv->mode2 |= data[5] << shift; + break; + case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: + if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE | + APCI1564_DI_INT_AND)) { + /* switching to 'AND' mode */ + devpriv->ctrl = APCI1564_DI_INT_ENABLE | + APCI1564_DI_INT_AND; + /* wipe old channels */ + devpriv->mode1 = 0; + devpriv->mode2 = 0; + } else { + /* preserve unspecified channels */ + devpriv->mode1 &= oldmask; + devpriv->mode2 &= oldmask; + } + /* configure specified channels */ + devpriv->mode1 |= data[4] << shift; + devpriv->mode2 |= data[5] << shift; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + return insn->n; +} + +static int apci1564_cos_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + data[1] = s->state; + + return 0; +} + +static int apci1564_cos_cmdtest(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_cmd *cmd) +{ + int err = 0; + + /* Step 1 : check if triggers are trivially valid */ + + err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW); + err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT); + err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW); + err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT); + err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE); + + if (err) + return 1; + + /* Step 2a : make sure trigger sources are unique */ + /* Step 2b : and mutually compatible */ + + if (err) + return 2; + + /* Step 3: check if arguments are trivially valid */ + + err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0); + err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0); + err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0); + err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len); + err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0); + + if (err) + return 3; + + /* step 4: ignored */ + + if (err) + return 4; + + return 0; +} + +/* + * Change-Of-State (COS) 'do_cmd' operation + * + * Enable the COS interrupt as configured by apci1564_cos_insn_config(). + */ +static int apci1564_cos_cmd(struct comedi_device *dev, + struct comedi_subdevice *s) { struct apci1564_private *devpriv = dev->private; - devpriv->do_int_type = 0; + if (!devpriv->ctrl) { + dev_warn(dev->class_dev, + "Interrupts disabled due to mode configuration!\n"); + return -EINVAL; + } + + outl(devpriv->mode1, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG); + outl(devpriv->mode2, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG); + outl(devpriv->ctrl, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); + + return 0; +} + +static int apci1564_cos_cancel(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + struct apci1564_private *devpriv = dev->private; - /* Disable the input interrupts and reset status register */ outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG); outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG); outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG); - /* Reset the output channels and disable interrupts */ - outl(0x0, devpriv->amcc_iobase + APCI1564_DO_REG); - outl(0x0, devpriv->amcc_iobase + APCI1564_DO_INT_CTRL_REG); - - /* Reset the watchdog registers */ - addi_watchdog_reset(devpriv->amcc_iobase + APCI1564_WDOG_REG); - - /* Reset the timer registers */ - outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_CTRL_REG); - outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_RELOAD_REG); - - /* Reset the counter registers */ - outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1)); - outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2)); - outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3)); - outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4)); - return 0; } @@ -113,7 +301,7 @@ static int apci1564_auto_attach(struct comedi_device *dev, dev->irq = pcidev->irq; } - ret = comedi_alloc_subdevices(dev, 3); + ret = comedi_alloc_subdevices(dev, 4); if (ret) return ret; @@ -125,7 +313,6 @@ static int apci1564_auto_attach(struct comedi_device *dev, s->maxdata = 1; s->len_chanlist = 32; s->range_table = &range_digital; - s->insn_config = apci1564_di_config; s->insn_bits = apci1564_di_insn_bits; /* Allocate and Initialise DO Subdevice Structures */ @@ -152,6 +339,25 @@ static int apci1564_auto_attach(struct comedi_device *dev, s->insn_read = apci1564_timer_read; s->insn_config = apci1564_timer_config; + /* Change-Of-State (COS) interrupt subdevice */ + s = &dev->subdevices[3]; + if (dev->irq) { + dev->read_subdev = s; + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE | SDF_CMD_READ; + s->n_chan = 1; + s->maxdata = 1; + s->range_table = &range_digital; + s->len_chanlist = 1; + s->insn_config = apci1564_cos_insn_config; + s->insn_bits = apci1564_cos_insn_bits; + s->do_cmdtest = apci1564_cos_cmdtest; + s->do_cmd = apci1564_cos_cmd; + s->cancel = apci1564_cos_cancel; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + return 0; }