ARM: dts: Add smc91x GPMC configuration for 2430sdp

Let's use the bootloader values except for the partially configured
wait-pin that does not seem to work.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2014-10-29 17:16:47 -07:00
parent e2c5eb78a3
commit 1bb3740439

View File

@ -43,7 +43,31 @@ ethernet@gpmc {
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
gpmc,mux-add-data;
};
gpmc,sync-clk-ps = <0>;
gpmc,mux-add-data = <2>;
gpmc,device-width = <1>;
gpmc,cycle2cycle-samecsen = <1>;
gpmc,cycle2cycle-diffcsen = <1>;
gpmc,cs-on-ns = <7>;
gpmc,cs-rd-off-ns = <233>;
gpmc,cs-wr-off-ns = <233>;
gpmc,adv-on-ns = <22>;
gpmc,adv-rd-off-ns = <60>;
gpmc,adv-wr-off-ns = <60>;
gpmc,oe-on-ns = <67>;
gpmc,oe-off-ns = <210>;
gpmc,we-on-ns = <67>;
gpmc,we-off-ns = <210>;
gpmc,rd-cycle-ns = <233>;
gpmc,wr-cycle-ns = <233>;
gpmc,access-ns = <233>;
gpmc,page-burst-access-ns = <30>;
gpmc,bus-turnaround-ns = <30>;
gpmc,cycle2cycle-delay-ns = <30>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,wr-access-ns = <0>;
};
};