mtd: spi-nor: Fix SPI NOR acronym

The correct terminology is serial NOR flash or SPI NOR.
s/SPI-NOR/SPI NOR and s/spi-nor/SPI NOR across the subsystem.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

drivers/mtd/spi-nor/Kconfig

@@ -1,12 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig MTD_SPI_NOR
-	tristate "SPI-NOR device support"
+	tristate "SPI NOR device support"
 	depends on MTD
 	depends on MTD && SPI_MASTER
 	select SPI_MEM
 	help
 	  This is the framework for the SPI NOR which can be used by the SPI
-	  device drivers and the SPI-NOR device driver.
+	  device drivers and the SPI NOR device driver.
 
 if MTD_SPI_NOR
 

drivers/mtd/spi-nor/controllers/Kconfig

@@ -21,11 +21,11 @@ config SPI_CADENCE_QUADSPI
 	  Flash as an MTD device.
 
 config SPI_HISI_SFC
-	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+	tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)"
 	depends on ARCH_HISI || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
-	  This enables support for HiSilicon FMC SPI-NOR flash controller.
+	  This enables support for HiSilicon FMC SPI NOR flash controller.
 
 config SPI_NXP_SPIFI
 	tristate "NXP SPI Flash Interface (SPIFI)"

drivers/mtd/spi-nor/controllers/aspeed-smc.c

@@ -727,7 +727,7 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
 
 	/*
 	 * TODO: Adjust clocks if fast read is supported and interpret
-	 * SPI-NOR flags to adjust controller settings.
+	 * SPI NOR flags to adjust controller settings.
 	 */
 	if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
 		if (chip->nor.read_dummy == 0)

drivers/mtd/spi-nor/controllers/hisi-sfc.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * HiSilicon FMC SPI-NOR flash controller driver
+ * HiSilicon FMC SPI NOR flash controller driver
  *
  * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
  */

drivers/mtd/spi-nor/controllers/nxp-spifi.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
+ * SPI NOR driver for NXP SPI Flash Interface (SPIFI)
  *
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
  *

drivers/mtd/spi-nor/core.c

@@ -2469,7 +2469,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
 	nor->read_proto = read->proto;
 
 	/*
-	 * In the spi-nor framework, we don't need to make the difference
+	 * In the SPI NOR framework, we don't need to make the difference
 	 * between mode clock cycles and wait state clock cycles.
 	 * Indeed, the value of the mode clock cycles is used by a QSPI
 	 * flash memory to know whether it should enter or leave its 0-4-4
@@ -3126,7 +3126,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	/*
 	 * Make sure the XSR_RDY flag is set before calling
 	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
-	 * with Atmel spi-nor
+	 * with Atmel SPI NOR.
 	 */
 	if (info->flags & SPI_NOR_XSR_RDY)
 		nor->flags |=  SNOR_F_READY_XSR_RDY;

include/linux/mtd/spi-nor.h

@@ -302,7 +302,7 @@ struct spi_nor;
  * @read:		read data from the SPI NOR.
  * @write:		write data to the SPI NOR.
  * @erase:		erase a sector of the SPI NOR at the offset @offs; if
- *			not provided by the driver, spi-nor will send the erase
+ *			not provided by the driver, SPI NOR will send the erase
  *			opcode via write_reg().
  */
 struct spi_nor_controller_ops {
@@ -336,7 +336,7 @@ struct spi_nor_flash_parameter;
  *                      layer is not DMA-able
  * @bouncebuf_size:	size of the bounce buffer
  * @info:		SPI NOR part JEDEC MFR ID and other info
- * @manufacturer:	spi-nor manufacturer
+ * @manufacturer:	SPI NOR manufacturer
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
@@ -344,12 +344,12 @@ struct spi_nor_flash_parameter;
  * @read_dummy:		the dummy needed by the read operation
  * @program_opcode:	the program opcode
  * @sst_write_second:	used by the SST write operation
- * @flags:		flag options for the current SPI-NOR (SNOR_F_*)
+ * @flags:		flag options for the current SPI NOR (SNOR_F_*)
  * @read_proto:		the SPI protocol for read operations
  * @write_proto:	the SPI protocol for write operations
  * @reg_proto:		the SPI protocol for read_reg/write_reg/erase operations
  * @controller_ops:	SPI NOR controller driver specific operations.
- * @params:		[FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
+ * @params:		[FLASH-SPECIFIC] SPI NOR flash parameters and settings.
  *                      The structure includes legacy flash parameters and
  *                      settings that can be overwritten by the spi_nor_fixups
  *                      hooks, or dynamically when parsing the SFDP tables.