davinci: audio: move tlv320aic33 i2c setup into board files

Tested on DM6446, DM355, DM6447, DA850 EVMs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This commit is contained in:
Chaithrika U S 2009-08-25 15:20:05 +03:00 committed by Kevin Hilman
parent 213765d7b4
commit 1a7ff8ff6e
5 changed files with 19 additions and 2 deletions

View File

@ -41,6 +41,9 @@ static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &da830_evm_i2c_eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
}
};
static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {

View File

@ -143,6 +143,12 @@ static struct platform_device da850_evm_nandflash_device = {
.resource = da850_evm_nandflash_resource,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
}
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
@ -343,6 +349,9 @@ static __init void da850_evm_init(void)
davinci_serial_init(&da850_evm_uart_config);
i2c_register_board_info(1, da850_evm_i2c_devices,
ARRAY_SIZE(da850_evm_i2c_devices));
/*
* shut down uart 0 and 1; they are not used on the board and
* accessing them causes endless "too much work in irq53" messages

View File

@ -139,7 +139,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = {
{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
.platform_data = dm355evm_mmcsd_gpios,
/* plus irq */ },
/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
};

View File

@ -559,8 +559,10 @@ static struct i2c_board_info __initdata i2c_info[] = {
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &eeprom_info,
},
{
I2C_BOARD_INFO("tlv320aic33", 0x1b),
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
* - tvp5146 video decoder (0x5d)
*/
};

View File

@ -299,6 +299,9 @@ static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("cpld_reg0", 0x3a),
},
{
I2C_BOARD_INFO("tlv320aic33", 0x18),
}
};
static struct davinci_i2c_platform_data i2c_pdata = {