AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-12 22:56:48 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

imx-serial: Reduce RX DMA startup latency when opening for reading

Browse Source 
Reduce RX DMA start latency for the first reception when port is opened
for reading. Instead of waiting for an interrupt signaling data on RX
FIFO or data too old on RX FIFO, start RX DMA immediately when the
serial port is opened for reading.

Before this patch, the average RX DMA latency for the first reception
was 42489 microseconds with a standard deviation of 25721 microseconds
in 36 samples.

After the patch the average RX DMA latency for the first reception, when
the serial port is opened for reading, is 653 microseconds with a
standard deviation of 294 microseconds in 36 samples.

Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Peter Senna Tschudin 2017-04-07 11:45:24 +02:00 committed by Greg Kroah-Hartman
parent 77e6fe7fd2
commit 18a4208826
1 changed files with 49 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
drivers/tty/serial/imx.c
View File

@ -719,6 +719,27 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
return IRQ_HANDLED;
}
static void imx_disable_rx_int(struct imx_port *sport)
{
unsigned long temp;
sport->dma_is_rxing = 1;
/* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_ATEN);
writel(temp, sport->port.membase + UCR2);
/* disable the rx errors interrupts */
temp = readl(sport->port.membase + UCR4);
temp &= ~UCR4_OREN;
writel(temp, sport->port.membase + UCR4);
}
static void clear_rx_errors(struct imx_port *sport);
static int start_rx_dma(struct imx_port *sport);
/*
@ -734,21 +755,8 @@ static void imx_dma_rxint(struct imx_port *sport)
temp = readl(sport->port.membase + USR2);
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
sport->dma_is_rxing = 1;
/* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_ATEN);
writel(temp, sport->port.membase + UCR2);
/* disable the rx errors interrupts */
temp = readl(sport->port.membase + UCR4);
temp &= ~UCR4_OREN;
writel(temp, sport->port.membase + UCR4);
imx_disable_rx_int(sport);
/* tell the DMA to receive the data. */
start_rx_dma(sport);
@ -1330,6 +1338,33 @@ static int imx_startup(struct uart_port *port)
* Enable modem status interrupts
*/
imx_enable_ms(&sport->port);
/*
* If the serial port is opened for reading start RX DMA immediately
* instead of waiting for RX FIFO interrupts. In our iMX53 the average
* delay for the first reception dropped from approximately 35000
* microseconds to 1000 microseconds.
*/
if (sport->dma_is_enabled) {
struct tty_struct *tty = sport->port.state->port.tty;
struct tty_file_private *file_priv;
int readcnt = 0;
spin_lock(&tty->files_lock);
if (!list_empty(&tty->tty_files))
list_for_each_entry(file_priv, &tty->tty_files, list)
if (!(file_priv->file->f_flags & O_WRONLY))
readcnt++;
spin_unlock(&tty->files_lock);
if (readcnt > 0) {
imx_disable_rx_int(sport);
start_rx_dma(sport);
}
}
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;