From 169110c3645621497ca0b1d0d7bc80dcea8ff9d4 Mon Sep 17 00:00:00 2001 From: Simon Budig Date: Mon, 9 Oct 2017 20:58:11 -0700 Subject: [PATCH] Input: edt-ft5x06 - make distinction between m06/m09/generic more clear Since the driver also is useful for some non-EDT touchscreens based on the focaltec chips introduce the concept of a "generic" focaltec based touch. Use a better heuristics for model detection and be more specific in the source. Signed-off-by: Simon Budig Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 122 +++++++++++++++++++------ 1 file changed, 93 insertions(+), 29 deletions(-) diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index f879d14f7ffc..56bfd0c14c91 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -70,8 +70,9 @@ #define EDT_RAW_DATA_DELAY 1000 /* usec */ enum edt_ver { - M06, - M09, + EDT_M06, + EDT_M09, + GENERIC_FT, }; struct edt_reg_addr { @@ -179,14 +180,15 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) int error; switch (tsdata->version) { - case M06: + case EDT_M06: cmd = 0xf9; /* tell the controller to send touch data */ offset = 5; /* where the actual touch data starts */ tplen = 4; /* data comes in so called frames */ crclen = 1; /* length of the crc data */ break; - case M09: + case EDT_M09: + case GENERIC_FT: cmd = 0x0; offset = 3; tplen = 6; @@ -210,7 +212,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) } /* M09 does not send header or CRC */ - if (tsdata->version == M06) { + if (tsdata->version == EDT_M06) { if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != datalen) { dev_err_ratelimited(dev, @@ -233,7 +235,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) continue; /* M06 sometimes sends bogus coordinates in TOUCH_DOWN */ - if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN) + if (tsdata->version == EDT_M06 && type == TOUCH_EVENT_DOWN) continue; x = ((buf[0] << 8) | buf[1]) & 0x0fff; @@ -264,14 +266,15 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata, u8 wrbuf[4]; switch (tsdata->version) { - case M06: + case EDT_M06: wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; wrbuf[2] = value; wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2]; return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL); - case M09: + case EDT_M09: + case GENERIC_FT: wrbuf[0] = addr; wrbuf[1] = value; @@ -290,7 +293,7 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, int error; switch (tsdata->version) { - case M06: + case EDT_M06: wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40; @@ -309,7 +312,8 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, } break; - case M09: + case EDT_M09: + case GENERIC_FT: wrbuf[0] = addr; error = edt_ft5x06_ts_readwrite(tsdata->client, 1, wrbuf, 1, rdbuf); @@ -368,11 +372,12 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, } switch (tsdata->version) { - case M06: + case EDT_M06: addr = attr->addr_m06; break; - case M09: + case EDT_M09: + case GENERIC_FT: addr = attr->addr_m09; break; @@ -437,11 +442,12 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, } switch (tsdata->version) { - case M06: + case EDT_M06: addr = attr->addr_m06; break; - case M09: + case EDT_M09: + case GENERIC_FT: addr = attr->addr_m09; break; @@ -508,7 +514,7 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata) } /* mode register is 0x3c when in the work mode */ - if (tsdata->version == M09) + if (tsdata->version != EDT_M06) goto m09_out; error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03); @@ -545,7 +551,7 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata) return error; m09_out: - dev_err(&client->dev, "No factory mode support for M09\n"); + dev_err(&client->dev, "No factory mode support for M09/GENERIC_FT\n"); return -EINVAL; } @@ -779,7 +785,7 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, * at least M09 won't send 3 bytes here */ if (!(strncasecmp(rdbuf + 1, "EP0", 3))) { - tsdata->version = M06; + tsdata->version = EDT_M06; /* remove last '$' end marker */ rdbuf[EDT_NAME_LEN - 1] = '\0'; @@ -793,8 +799,16 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN); strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); } else { - /* since there are only two versions around (M06, M09) */ - tsdata->version = M09; + /* If it is not an EDT M06 touchscreen, then the model + * detection is a bit hairy. The different ft5x06 + * firmares around don't reliably implement the + * identification registers. Well, we'll take a shot. + * + * The main difference between generic focaltec based + * touches and EDT M09 is that we know how to retrieve + * the max coordinates for the latter. + */ + tsdata->version = GENERIC_FT; error = edt_ft5x06_ts_readwrite(client, 1, "\xA6", 2, rdbuf); @@ -808,8 +822,34 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, if (error) return error; - snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09", - rdbuf[0] >> 4, rdbuf[0] & 0x0F); + /* This "model identification" is not exact. Unfortunately + * not all firmwares for the ft5x06 put useful values in + * the identification registers. + */ + switch (rdbuf[0]) { + case 0x35: /* EDT EP0350M09 */ + case 0x43: /* EDT EP0430M09 */ + case 0x50: /* EDT EP0500M09 */ + case 0x57: /* EDT EP0570M09 */ + case 0x70: /* EDT EP0700M09 */ + tsdata->version = EDT_M09; + snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09", + rdbuf[0] >> 4, rdbuf[0] & 0x0F); + break; + case 0xa1: /* EDT EP1010ML00 */ + tsdata->version = EDT_M09; + snprintf(model_name, EDT_NAME_LEN, "EP%i%i0ML00", + rdbuf[0] >> 4, rdbuf[0] & 0x0F); + break; + case 0x5a: /* Solomon Goldentek Display */ + snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0"); + break; + default: + snprintf(model_name, EDT_NAME_LEN, + "generic ft5x06 (%02x)", + rdbuf[0]); + break; + } } return 0; @@ -853,8 +893,16 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) if (reg_addr->reg_report_rate != NO_REGISTER) tsdata->report_rate = edt_ft5x06_register_read(tsdata, reg_addr->reg_report_rate); - tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x); - tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y); + if (tsdata->version == EDT_M06 || + tsdata->version == EDT_M09) { + tsdata->num_x = edt_ft5x06_register_read(tsdata, + reg_addr->reg_num_x); + tsdata->num_y = edt_ft5x06_register_read(tsdata, + reg_addr->reg_num_y); + } else { + tsdata->num_x = -1; + tsdata->num_y = -1; + } } static void @@ -863,7 +911,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) struct edt_reg_addr *reg_addr = &tsdata->reg_addr; switch (tsdata->version) { - case M06: + case EDT_M06: reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD; reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE; reg_addr->reg_gain = WORK_REGISTER_GAIN; @@ -872,7 +920,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_num_y = WORK_REGISTER_NUM_Y; break; - case M09: + case EDT_M09: reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; reg_addr->reg_report_rate = NO_REGISTER; reg_addr->reg_gain = M09_REGISTER_GAIN; @@ -880,6 +928,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_num_x = M09_REGISTER_NUM_X; reg_addr->reg_num_y = M09_REGISTER_NUM_Y; break; + + case GENERIC_FT: + /* this is a guesswork */ + reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; + reg_addr->reg_gain = M09_REGISTER_GAIN; + reg_addr->reg_offset = M09_REGISTER_OFFSET; + break; } } @@ -969,10 +1024,19 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; - input_set_abs_params(input, ABS_MT_POSITION_X, - 0, tsdata->num_x * 64 - 1, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, - 0, tsdata->num_y * 64 - 1, 0, 0); + if (tsdata->version == EDT_M06 || + tsdata->version == EDT_M09) { + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, tsdata->num_x * 64 - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, tsdata->num_y * 64 - 1, 0, 0); + } else { + /* Unknown maximum values. Specify via devicetree */ + input_set_abs_params(input, ABS_MT_POSITION_X, + 0, 65535, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + 0, 65535, 0, 0); + } touchscreen_parse_properties(input, true, &tsdata->prop);