iio: adc: Cosmic Circuits 10001 ADC driver

This commit adds support for Cosmic Circuits 10001 10-bit ADC device.

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Phani Movva <Phani.Movva@imgtec.com>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
[ezequiel: code style cleaning]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/Kconfig

@@ -135,6 +135,17 @@ config AXP288_ADC
 	  device. Depending on platform configuration, this general purpose ADC can
 	  be used for sampling sensors such as thermal resistors.
 
+config CC10001_ADC
+	tristate "Cosmic Circuits 10001 ADC driver"
+	depends on HAS_IOMEM || HAVE_CLK || REGULATOR
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Cosmic Circuits 10001 ADC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called cc10001_adc.
+
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)

drivers/iio/adc/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
+obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_MAX1027) += max1027.o

drivers/iio/adc/cc10001_adc.c

@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 2014-2015 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/* Registers */
+#define CC10001_ADC_CONFIG		0x00
+#define CC10001_ADC_START_CONV		BIT(4)
+#define CC10001_ADC_MODE_SINGLE_CONV	BIT(5)
+
+#define CC10001_ADC_DDATA_OUT		0x04
+#define CC10001_ADC_EOC			0x08
+#define CC10001_ADC_EOC_SET		BIT(0)
+
+#define CC10001_ADC_CHSEL_SAMPLED	0x0c
+#define CC10001_ADC_POWER_UP		0x10
+#define CC10001_ADC_POWER_UP_SET	BIT(0)
+#define CC10001_ADC_DEBUG		0x14
+#define CC10001_ADC_DATA_COUNT		0x20
+
+#define CC10001_ADC_DATA_MASK		GENMASK(9, 0)
+#define CC10001_ADC_NUM_CHANNELS	8
+#define CC10001_ADC_CH_MASK		GENMASK(2, 0)
+
+#define CC10001_INVALID_SAMPLED		0xffff
+#define CC10001_MAX_POLL_COUNT		20
+
+/*
+ * As per device specification, wait six clock cycles after power-up to
+ * activate START. Since adding two more clock cycles delay does not
+ * impact the performance too much, we are adding two additional cycles delay
+ * intentionally here.
+ */
+#define	CC10001_WAIT_CYCLES		8
+
+struct cc10001_adc_device {
+	void __iomem *reg_base;
+	struct clk *adc_clk;
+	struct regulator *reg;
+	u16 *buf;
+
+	struct mutex lock;
+	unsigned long channel_map;
+	unsigned int start_delay_ns;
+	unsigned int eoc_delay_ns;
+};
+
+static inline void cc10001_adc_write_reg(struct cc10001_adc_device *adc_dev,
+					 u32 reg, u32 val)
+{
+	writel(val, adc_dev->reg_base + reg);
+}
+
+static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev,
+				       u32 reg)
+{
+	return readl(adc_dev->reg_base + reg);
+}
+
+static void cc10001_adc_start(struct cc10001_adc_device *adc_dev,
+			      unsigned int channel)
+{
+	u32 val;
+
+	/* Channel selection and mode of operation */
+	val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV;
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
+
+	val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG);
+	val = val | CC10001_ADC_START_CONV;
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val);
+}
+
+static u16 cc10001_adc_poll_done(struct iio_dev *indio_dev,
+				 unsigned int channel,
+				 unsigned int delay)
+{
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+	unsigned int poll_count = 0;
+
+	while (!(cc10001_adc_read_reg(adc_dev, CC10001_ADC_EOC) &
+			CC10001_ADC_EOC_SET)) {
+
+		ndelay(delay);
+		if (poll_count++ == CC10001_MAX_POLL_COUNT)
+			return CC10001_INVALID_SAMPLED;
+	}
+
+	poll_count = 0;
+	while ((cc10001_adc_read_reg(adc_dev, CC10001_ADC_CHSEL_SAMPLED) &
+			CC10001_ADC_CH_MASK) != channel) {
+
+		ndelay(delay);
+		if (poll_count++ == CC10001_MAX_POLL_COUNT)
+			return CC10001_INVALID_SAMPLED;
+	}
+
+	/* Read the 10 bit output register */
+	return cc10001_adc_read_reg(adc_dev, CC10001_ADC_DDATA_OUT) &
+			       CC10001_ADC_DATA_MASK;
+}
+
+static irqreturn_t cc10001_adc_trigger_h(int irq, void *p)
+{
+	struct cc10001_adc_device *adc_dev;
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev;
+	unsigned int delay_ns;
+	unsigned int channel;
+	bool sample_invalid;
+	u16 *data;
+	int i;
+
+	indio_dev = pf->indio_dev;
+	adc_dev = iio_priv(indio_dev);
+	data = adc_dev->buf;
+
+	mutex_lock(&adc_dev->lock);
+
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
+			      CC10001_ADC_POWER_UP_SET);
+
+	/* Wait for 8 (6+2) clock cycles before activating START */
+	ndelay(adc_dev->start_delay_ns);
+
+	/* Calculate delay step for eoc and sampled data */
+	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
+
+	i = 0;
+	sample_invalid = false;
+	for_each_set_bit(channel, indio_dev->active_scan_mask,
+				  indio_dev->masklength) {
+
+		cc10001_adc_start(adc_dev, channel);
+
+		data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns);
+		if (data[i] == CC10001_INVALID_SAMPLED) {
+			dev_warn(&indio_dev->dev,
+				 "invalid sample on channel %d\n", channel);
+			sample_invalid = true;
+			goto done;
+		}
+		i++;
+	}
+
+done:
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+
+	mutex_unlock(&adc_dev->lock);
+
+	if (!sample_invalid)
+		iio_push_to_buffers_with_timestamp(indio_dev, data,
+						   iio_get_time_ns());
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan)
+{
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+	unsigned int delay_ns;
+	u16 val;
+
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP,
+			      CC10001_ADC_POWER_UP_SET);
+
+	/* Wait for 8 (6+2) clock cycles before activating START */
+	ndelay(adc_dev->start_delay_ns);
+
+	/* Calculate delay step for eoc and sampled data */
+	delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT;
+
+	cc10001_adc_start(adc_dev, chan->channel);
+
+	val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns);
+
+	cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0);
+
+	return val;
+}
+
+static int cc10001_adc_read_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int *val, int *val2, long mask)
+{
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+		mutex_lock(&adc_dev->lock);
+		*val = cc10001_adc_read_raw_voltage(indio_dev, chan);
+		mutex_unlock(&adc_dev->lock);
+
+		if (*val == CC10001_INVALID_SAMPLED)
+			return -EIO;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(adc_dev->reg);
+		if (ret)
+			return ret;
+
+		*val = ret / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int cc10001_update_scan_mode(struct iio_dev *indio_dev,
+				    const unsigned long *scan_mask)
+{
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+
+	kfree(adc_dev->buf);
+	adc_dev->buf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (!adc_dev->buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static const struct iio_info cc10001_adc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &cc10001_adc_read_raw,
+	.update_scan_mode = &cc10001_update_scan_mode,
+};
+
+static int cc10001_adc_channel_init(struct iio_dev *indio_dev)
+{
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+	struct iio_chan_spec *chan_array, *timestamp;
+	unsigned int bit, idx = 0;
+
+	indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map,
+						CC10001_ADC_NUM_CHANNELS);
+
+	chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1,
+				  sizeof(struct iio_chan_spec),
+				  GFP_KERNEL);
+	if (!chan_array)
+		return -ENOMEM;
+
+	for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) {
+		struct iio_chan_spec *chan = &chan_array[idx];
+
+		chan->type = IIO_VOLTAGE;
+		chan->indexed = 1;
+		chan->channel = bit;
+		chan->scan_index = idx;
+		chan->scan_type.sign = 'u';
+		chan->scan_type.realbits = 10;
+		chan->scan_type.storagebits = 16;
+		chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
+		chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+		idx++;
+	}
+
+	timestamp = &chan_array[idx];
+	timestamp->type = IIO_TIMESTAMP;
+	timestamp->channel = -1;
+	timestamp->scan_index = idx;
+	timestamp->scan_type.sign = 's';
+	timestamp->scan_type.realbits = 64;
+	timestamp->scan_type.storagebits = 64;
+
+	indio_dev->channels = chan_array;
+
+	return 0;
+}
+
+static int cc10001_adc_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct cc10001_adc_device *adc_dev;
+	unsigned long adc_clk_rate;
+	struct resource *res;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	adc_dev = iio_priv(indio_dev);
+
+	adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0);
+	if (!of_property_read_u32(node, "adc-reserved-channels", &ret))
+		adc_dev->channel_map &= ~ret;
+
+	adc_dev->reg = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(adc_dev->reg))
+		return PTR_ERR(adc_dev->reg);
+
+	ret = regulator_enable(adc_dev->reg);
+	if (ret)
+		return ret;
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->info = &cc10001_adc_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(adc_dev->reg_base)) {
+		ret = PTR_ERR(adc_dev->reg_base);
+		goto err_disable_reg;
+	}
+
+	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(adc_dev->adc_clk)) {
+		dev_err(&pdev->dev, "failed to get the clock\n");
+		ret = PTR_ERR(adc_dev->adc_clk);
+		goto err_disable_reg;
+	}
+
+	ret = clk_prepare_enable(adc_dev->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable the clock\n");
+		goto err_disable_reg;
+	}
+
+	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
+	if (!adc_clk_rate) {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "null clock rate!\n");
+		goto err_disable_clk;
+	}
+
+	adc_dev->eoc_delay_ns = NSEC_PER_SEC / adc_clk_rate;
+	adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES;
+
+	/* Setup the ADC channels available on the device */
+	ret = cc10001_adc_channel_init(indio_dev);
+	if (ret < 0)
+		goto err_disable_clk;
+
+	mutex_init(&adc_dev->lock);
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 &cc10001_adc_trigger_h, NULL);
+	if (ret < 0)
+		goto err_disable_clk;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto err_cleanup_buffer;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	return 0;
+
+err_cleanup_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_disable_clk:
+	clk_disable_unprepare(adc_dev->adc_clk);
+err_disable_reg:
+	regulator_disable(adc_dev->reg);
+	return ret;
+}
+
+static int cc10001_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cc10001_adc_device *adc_dev = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	clk_disable_unprepare(adc_dev->adc_clk);
+	regulator_disable(adc_dev->reg);
+
+	return 0;
+}
+
+static const struct of_device_id cc10001_adc_dt_ids[] = {
+	{ .compatible = "cosmic,10001-adc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cc10001_adc_dt_ids);
+
+static struct platform_driver cc10001_adc_driver = {
+	.driver = {
+		.name   = "cc10001-adc",
+		.of_match_table = cc10001_adc_dt_ids,
+	},
+	.probe	= cc10001_adc_probe,
+	.remove	= cc10001_adc_remove,
+};
+module_platform_driver(cc10001_adc_driver);
+
+MODULE_AUTHOR("Phani Movva <Phani.Movva@imgtec.com>");
+MODULE_DESCRIPTION("Cosmic Circuits ADC driver");
+MODULE_LICENSE("GPL v2");