The i.MX device tree updates for 3.17:

- Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJTyOTXAAoJEFBXWFqHsHzOnMgH/1Kjr8tbtPEx0aJ8HDAqAY7t L4oDPZOt5QtbkWN4PH00yvgpN/ODl5ux6u1OKXt6F/XYXcBWBngGcIpPl5Qwo8lG WMOt+OLh6xWSRwvzi9iXKU18PDbHvtHmSHCPLDC64T2esi8AuQIuWW8zWl+NAYhs yrhjxVN8VQBuc3XubxNjATXr4ybsB4uhpshuFYUvyGo+KeRNJv2aNen//KyFPVNC VuD/cRag46uWKymJ8gMtl5B5WzbIOqfs5wPHaULiIv8IJzItPW+PbGzyVK1XuTzl pRbQAIqw7BPCzKpJ1elyvz9MThYyJOhV7F36GZyZIVCvITDoH9bdR9ib1EH4Wyc= =q+sf -----END PGP SIGNATURE----- Merge tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo: The i.MX device tree updates for 3.17: - Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC * tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits) ARM: dts: vf610: add FlexCAN node ARM: dts: add initial Rex Basic board support ARM: dts: add initial Rex Pro board support ARM: dts: mx5: Split M53EVK into SoM and EVK parts ARM: dts: imx6: RIoTboard explicitly define pad settings ARM: dts: vf610: fix length of eshdc1 register property ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. ARM: dts: imx53: correct clock-names of SATA node ARM: imx6: Align ssi nodes between mx6 variants ARM: i.MX27 clk: dts: Use clock defines in DTS files ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx ARM: dts: imx6sx-sdb: Add audio support ARM: dts: imx6sx: Pass the fsl,fifo-depth property ARM: dts: imx6sx: Fix sdma node ARM: dts: imx6: edmqmx6: Add can bus ARM: dts: imx6: edmqmx6: Add two other i2c buses ARM: dts: imx6: edmqmx6: Add PCIe support ARM: dts: imx25-pdk: Add USB OTG support ARM: dts: i.MX53: add aipstz nodes ARM: dts: mxs: Split M28EVK into SoM and EVK parts ... Signed-off-by: Olof Johansson <olof@lixom.net>
2024-11-30 08:16:41 +07:00 · 2014-07-19 12:12:57 -07:00 · 2014-07-19 12:12:57 -07:00 · 1409f3fd5b
commit 1409f3fd5b
parent f097748f39 69603fbbc4
189 changed files with 9494 additions and 5048 deletions
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt
@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt
@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible  : Should be "fsl,imx21-ccm".
+- reg         : Address and length of the register set.
+- interrupts  : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx21-ccm";
+		reg = <0x10027000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+			 <&clks IMX21_CLK_PER1>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@ -7,117 +7,22 @@ Required properties:
 - #clock-cells: Should be <1>

 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX27
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy                0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	mpll_main2           5
-	ahb                  6
-	ipg                  7
-	nfc_div              8
-	per1_div             9
-	per2_div             10
-	per3_div             11
-	per4_div             12
-	vpu_sel              13
-	vpu_div              14
-	usb_div              15
-	cpu_sel              16
-	clko_sel             17
-	cpu_div              18
-	clko_div             19
-	ssi1_sel             20
-	ssi2_sel             21
-	ssi1_div             22
-	ssi2_div             23
-	clko_en              24
-	ssi2_ipg_gate        25
-	ssi1_ipg_gate        26
-	slcdc_ipg_gate       27
-	sdhc3_ipg_gate       28
-	sdhc2_ipg_gate       29
-	sdhc1_ipg_gate       30
-	scc_ipg_gate         31
-	sahara_ipg_gate      32
-	rtc_ipg_gate         33
-	pwm_ipg_gate         34
-	owire_ipg_gate       35
-	lcdc_ipg_gate        36
-	kpp_ipg_gate         37
-	iim_ipg_gate         38
-	i2c2_ipg_gate        39
-	i2c1_ipg_gate        40
-	gpt6_ipg_gate        41
-	gpt5_ipg_gate        42
-	gpt4_ipg_gate        43
-	gpt3_ipg_gate        44
-	gpt2_ipg_gate        45
-	gpt1_ipg_gate        46
-	gpio_ipg_gate        47
-	fec_ipg_gate         48
-	emma_ipg_gate        49
-	dma_ipg_gate         50
-	cspi3_ipg_gate       51
-	cspi2_ipg_gate       52
-	cspi1_ipg_gate       53
-	nfc_baud_gate        54
-	ssi2_baud_gate       55
-	ssi1_baud_gate       56
-	vpu_baud_gate        57
-	per4_gate            58
-	per3_gate            59
-	per2_gate            60
-	per1_gate            61
-	usb_ahb_gate         62
-	slcdc_ahb_gate       63
-	sahara_ahb_gate      64
-	lcdc_ahb_gate        65
-	vpu_ahb_gate         66
-	fec_ahb_gate         67
-	emma_ahb_gate        68
-	emi_ahb_gate         69
-	dma_ahb_gate         70
-	csi_ahb_gate         71
-	brom_ahb_gate        72
-	ata_ahb_gate         73
-	wdog_ipg_gate        74
-	usb_ipg_gate         75
-	uart6_ipg_gate       76
-	uart5_ipg_gate       77
-	uart4_ipg_gate       78
-	uart3_ipg_gate       79
-	uart2_ipg_gate       80
-	uart1_ipg_gate       81
-	ckih_div1p5          82
-	fpm                  83
-	mpll_osc_sel         84
-	mpll_sel             85
-	spll_gate            86
-	mshc_div             87
-	rtic_ipg_gate        88
-	mshc_ipg_gate        89
-	rtic_ahb_gate        90
-	mshc_baud_gate       91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.

 Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx27-ccm";
+		reg = <0x10027000 0x1000>;
+		#clock-cells = <1>;
+	};

-clks: ccm@10027000{
-	compatible = "fsl,imx27-ccm";
-	reg = <0x10027000 0x1000>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
-	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-	reg = <0x1000a000 0x1000>;
-	interrupts = <20>;
-	clocks = <&clks 81>, <&clks 61>;
-	clock-names = "ipg", "per";
-	status = "disabled";
-};
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+			 <&clks IMX27_CLK_PER1_GATE>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@ -7,223 +7,13 @@ Required properties:
 - #clock-cells: Should be <1>

 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	ckih			2
-	osc			3
-	pll2_pfd0_352m		4
-	pll2_pfd1_594m		5
-	pll2_pfd2_396m		6
-	pll3_pfd0_720m		7
-	pll3_pfd1_540m		8
-	pll3_pfd2_508m		9
-	pll3_pfd3_454m		10
-	pll2_198m		11
-	pll3_120m		12
-	pll3_80m		13
-	pll3_60m		14
-	twd			15
-	step			16
-	pll1_sw			17
-	periph_pre		18
-	periph2_pre		19
-	periph_clk2_sel		20
-	periph2_clk2_sel	21
-	axi_sel			22
-	esai_sel		23
-	asrc_sel		24
-	spdif_sel		25
-	gpu2d_axi		26
-	gpu3d_axi		27
-	gpu2d_core_sel		28
-	gpu3d_core_sel		29
-	gpu3d_shader_sel	30
-	ipu1_sel		31
-	ipu2_sel		32
-	ldb_di0_sel		33
-	ldb_di1_sel		34
-	ipu1_di0_pre_sel	35
-	ipu1_di1_pre_sel	36
-	ipu2_di0_pre_sel	37
-	ipu2_di1_pre_sel	38
-	ipu1_di0_sel		39
-	ipu1_di1_sel		40
-	ipu2_di0_sel		41
-	ipu2_di1_sel		42
-	hsi_tx_sel		43
-	pcie_axi_sel		44
-	ssi1_sel		45
-	ssi2_sel		46
-	ssi3_sel		47
-	usdhc1_sel		48
-	usdhc2_sel		49
-	usdhc3_sel		50
-	usdhc4_sel		51
-	enfc_sel		52
-	emi_sel			53
-	emi_slow_sel		54
-	vdo_axi_sel		55
-	vpu_axi_sel		56
-	cko1_sel		57
-	periph			58
-	periph2			59
-	periph_clk2		60
-	periph2_clk2		61
-	ipg			62
-	ipg_per			63
-	esai_pred		64
-	esai_podf		65
-	asrc_pred		66
-	asrc_podf		67
-	spdif_pred		68
-	spdif_podf		69
-	can_root		70
-	ecspi_root		71
-	gpu2d_core_podf		72
-	gpu3d_core_podf		73
-	gpu3d_shader		74
-	ipu1_podf		75
-	ipu2_podf		76
-	ldb_di0_podf		77
-	ldb_di1_podf		78
-	ipu1_di0_pre		79
-	ipu1_di1_pre		80
-	ipu2_di0_pre		81
-	ipu2_di1_pre		82
-	hsi_tx_podf		83
-	ssi1_pred		84
-	ssi1_podf		85
-	ssi2_pred		86
-	ssi2_podf		87
-	ssi3_pred		88
-	ssi3_podf		89
-	uart_serial_podf	90
-	usdhc1_podf		91
-	usdhc2_podf		92
-	usdhc3_podf		93
-	usdhc4_podf		94
-	enfc_pred		95
-	enfc_podf		96
-	emi_podf		97
-	emi_slow_podf		98
-	vpu_axi_podf		99
-	cko1_podf		100
-	axi			101
-	mmdc_ch0_axi_podf	102
-	mmdc_ch1_axi_podf	103
-	arm			104
-	ahb			105
-	apbh_dma		106
-	asrc			107
-	can1_ipg		108
-	can1_serial		109
-	can2_ipg		110
-	can2_serial		111
-	ecspi1			112
-	ecspi2			113
-	ecspi3			114
-	ecspi4			115
-	ecspi5			116
-	enet			117
-	esai			118
-	gpt_ipg			119
-	gpt_ipg_per		120
-	gpu2d_core		121
-	gpu3d_core		122
-	hdmi_iahb		123
-	hdmi_isfr		124
-	i2c1			125
-	i2c2			126
-	i2c3			127
-	iim			128
-	enfc			129
-	ipu1			130
-	ipu1_di0		131
-	ipu1_di1		132
-	ipu2			133
-	ipu2_di0		134
-	ldb_di0			135
-	ldb_di1			136
-	ipu2_di1		137
-	hsi_tx			138
-	mlb			139
-	mmdc_ch0_axi		140
-	mmdc_ch1_axi		141
-	ocram			142
-	openvg_axi		143
-	pcie_axi		144
-	pwm1			145
-	pwm2			146
-	pwm3			147
-	pwm4			148
-	per1_bch		149
-	gpmi_bch_apb		150
-	gpmi_bch		151
-	gpmi_io			152
-	gpmi_apb		153
-	sata			154
-	sdma			155
-	spba			156
-	ssi1			157
-	ssi2			158
-	ssi3			159
-	uart_ipg		160
-	uart_serial		161
-	usboh3			162
-	usdhc1			163
-	usdhc2			164
-	usdhc3			165
-	usdhc4			166
-	vdo_axi			167
-	vpu_axi			168
-	cko1			169
-	pll1_sys		170
-	pll2_bus		171
-	pll3_usb_otg		172
-	pll4_audio		173
-	pll5_video		174
-	pll8_mlb		175
-	pll7_usb_host		176
-	pll6_enet		177
-	ssi1_ipg		178
-	ssi2_ipg		179
-	ssi3_ipg		180
-	rom			181
-	usbphy1			182
-	usbphy2			183
-	ldb_di0_div_3_5		184
-	ldb_di1_div_3_5		185
-	sata_ref		186
-	sata_ref_100m		187
-	pcie_ref		188
-	pcie_ref_125m		189
-	enet_ref		190
-	usbphy1_gate		191
-	usbphy2_gate		192
-	pll4_post_div		193
-	pll5_post_div		194
-	pll5_video_div		195
-	eim_slow      		196
-	spdif      		197
-	cko2_sel      		198
-	cko2_podf      		199
-	cko2      		200
-	cko      		201
-	vdoa      		202
-	pll4_audio_div		203
-	lvds1_sel		204
-	lvds2_sel		205
-	lvds1_gate		206
-	lvds2_gate		207
-	esai_ahb		208
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.

 Examples:

+#include <dt-bindings/clock/imx6qdl-clock.h>
+
 clks: ccm@020c4000 {
 	compatible = "fsl,imx6q-ccm";
 	reg = <0x020c4000 0x4000>;
@ -235,7 +25,7 @@ uart1: serial@02020000 {
 	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 	reg = <0x02020000 0x4000>;
 	interrupts = <0 26 0x04>;
-	clocks = <&clks 160>, <&clks 161>;
+	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -157,10 +157,14 @@ dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
 	imx25-karo-tx25.dtb \
 	imx25-pdk.dtb \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-rdk.dtb \
 	imx27-phytec-phycard-s-rdk.dtb \
@ -182,6 +186,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
 	imx53-voipac-bsb.dtb \
+	imx6dl-aristainetos_4.dtb \
+	imx6dl-aristainetos_7.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
 	imx6dl-gw51xx.dtb \
@ -191,11 +197,16 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-hummingboard.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
+	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-811x.dtb \
 	imx6dl-wandboard.dtb \
+	imx6dl-wandboard-revb1.dtb \
 	imx6q-arm2.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
@ -209,13 +220,21 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-gw54xx.dtb \
 	imx6q-nitrogen6x.dtb \
 	imx6q-phytec-pbab01.dtb \
+	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb \
+	imx6q-tx6q-1010.dtb \
+	imx6q-tx6q-1010-comtft.dtb \
+	imx6q-tx6q-1020.dtb \
+	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1110.dtb \
 	imx6sl-evk.dtb \
+	imx6sx-sdb.dtb \
 	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		native-mode = <&qvga_timings>;
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_svga_timings>;
+		display-timings {
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_vga_timings>;
+		display-timings {
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@ -155,7 +155,6 @@ MX25_PAD_UART2_CTS__UART2_CTS		0x80000000

 &ssi1 {
 	codec-handle = <&tlv320aic23>;
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@ -233,7 +233,6 @@ MATRIX_KEY(0x3, 0x2, KEY_POWER)

 &ssi1 {
 	codec-handle = <&codec>;
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

@ -249,3 +248,10 @@ &usbhost1 {
 	dr_mode = "host";
 	status = "okay";
 };
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@ -312,7 +312,7 @@ clks: ccm@53f80000 {
 			gpt4: timer@53f84000 {
 				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 				reg = <0x53f84000 0x4000>;
-				clocks = <&clks 9>, <&clks 45>;
+				clocks = <&clks 95>, <&clks 47>;
 				clock-names = "ipg", "per";
 				interrupts = <1>;
 			};
@ -320,7 +320,7 @@ gpt4: timer@53f84000 {
 			gpt3: timer@53f88000 {
 				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 				reg = <0x53f88000 0x4000>;
-				clocks = <&clks 9>, <&clks 47>;
+				clocks = <&clks 94>, <&clks 47>;
 				clock-names = "ipg", "per";
 				interrupts = <29>;
 			};
@ -328,7 +328,7 @@ gpt3: timer@53f88000 {
 			gpt2: timer@53f8c000 {
 				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 				reg = <0x53f8c000 0x4000>;
-				clocks = <&clks 9>, <&clks 47>;
+				clocks = <&clks 93>, <&clks 47>;
 				clock-names = "ipg", "per";
 				interrupts = <53>;
 			};
@ -336,7 +336,7 @@ gpt2: timer@53f8c000 {
 			gpt1: timer@53f90000 {
 				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
-				clocks = <&clks 9>, <&clks 47>;
+				clocks = <&clks 92>, <&clks 47>;
 				clock-names = "ipg", "per";
 				interrupts = <54>;
 			};
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		clk14745600: clock@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <14745600>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@ -28,7 +28,7 @@ usbphy {
 		usbphy0: usbphy@0 {
 			compatible = "usb-nop-xceiv";
 			reg = <0>;
-			clocks = <&clks 0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
 		};
 	};
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@ -61,7 +61,7 @@ usbphy2: usbphy@2 {
 			compatible = "usb-nop-xceiv";
 			reg = <2>;
 			vcc-supply = <&reg_5v0>;
-			clocks = <&clks 0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
 		};
 	};
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@ -51,7 +51,7 @@ usbphy0: usbphy@0 {
 			compatible = "usb-nop-xceiv";
 			reg = <0>;
 			vcc-supply = <&sw3_reg>;
-			clocks = <&clks 0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
 		};
 	};
@ -310,7 +310,6 @@ &nfc {
 &ssi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ssi1>;
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@ -11,9 +11,11 @@

 #include "skeleton.dtsi"
 #include "imx27-pinfunc.h"
+
+#include <dt-bindings/clock/imx27-clock.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>

 / {
 	aliases {
@ -68,7 +70,7 @@ cpu: cpu@0 {
 				399000 1450000
 			>;
 			clock-latency = <62500>;
-			clocks = <&clks 18>;
+			clocks = <&clks IMX27_CLK_CPU_DIV>;
 			voltage-tolerance = <5>;
 		};
 	};
@ -91,7 +93,8 @@ dma: dma@10001000 {
 				compatible = "fsl,imx27-dma";
 				reg = <0x10001000 0x1000>;
 				interrupts = <32>;
-				clocks = <&clks 50>, <&clks 70>;
+				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
+					 <&clks IMX27_CLK_DMA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <1>;
 				#dma-channels = <16>;
@ -101,14 +104,15 @@ wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
 				interrupts = <27>;
-				clocks = <&clks 74>;
+				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
 			};

 			gpt1: timer@10003000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
-				clocks = <&clks 46>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -116,7 +120,8 @@ gpt2: timer@10004000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
-				clocks = <&clks 45>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -124,7 +129,8 @@ gpt3: timer@10005000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
-				clocks = <&clks 44>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -133,7 +139,8 @@ pwm: pwm@10006000 {
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
-				clocks = <&clks 34>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -141,14 +148,14 @@ kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
 				interrupts = <21>;
-				clocks = <&clks 37>;
+				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
 				status = "disabled";
 			};

 			owire: owire@10009000 {
 				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
 				reg = <0x10009000 0x1000>;
-				clocks = <&clks 35>;
+				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
 				status = "disabled";
 			};

@ -156,7 +163,8 @@ uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
 				interrupts = <20>;
-				clocks = <&clks 81>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -165,7 +173,8 @@ uart2: serial@1000b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000b000 0x1000>;
 				interrupts = <19>;
-				clocks = <&clks 80>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -174,7 +183,8 @@ uart3: serial@1000c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000c000 0x1000>;
 				interrupts = <18>;
-				clocks = <&clks 79>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -183,7 +193,8 @@ uart4: serial@1000d000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000d000 0x1000>;
 				interrupts = <17>;
-				clocks = <&clks 78>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -194,7 +205,8 @@ cspi1: cspi@1000e000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -205,7 +217,8 @@ cspi2: cspi@1000f000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -215,7 +228,7 @@ ssi1: ssi@10010000 {
 				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
 				reg = <0x10010000 0x1000>;
 				interrupts = <14>;
-				clocks = <&clks 26>;
+				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
 				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
 				dma-names = "rx0", "tx0", "rx1", "tx1";
 				fsl,fifo-depth = <8>;
@ -227,7 +240,7 @@ ssi2: ssi@10011000 {
 				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
 				reg = <0x10011000 0x1000>;
 				interrupts = <13>;
-				clocks = <&clks 25>;
+				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
 				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
 				dma-names = "rx0", "tx0", "rx1", "tx1";
 				fsl,fifo-depth = <8>;
@ -240,7 +253,7 @@ i2c1: i2c@10012000 {
 				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x10012000 0x1000>;
 				interrupts = <12>;
-				clocks = <&clks 40>;
+				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
 				status = "disabled";
 			};

@ -248,7 +261,8 @@ sdhci1: sdhci@10013000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10013000 0x1000>;
 				interrupts = <11>;
-				clocks = <&clks 30>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&dma 7>;
 				dma-names = "rx-tx";
@ -259,7 +273,8 @@ sdhci2: sdhci@10014000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10014000 0x1000>;
 				interrupts = <10>;
-				clocks = <&clks 29>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&dma 6>;
 				dma-names = "rx-tx";
@ -276,6 +291,7 @@ iomuxc: iomuxc@10015000 {
 				gpio1: gpio@10015000 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015000 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -286,6 +302,7 @@ gpio1: gpio@10015000 {
 				gpio2: gpio@10015100 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015100 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -296,6 +313,7 @@ gpio2: gpio@10015100 {
 				gpio3: gpio@10015200 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015200 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -306,6 +324,7 @@ gpio3: gpio@10015200 {
 				gpio4: gpio@10015300 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015300 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -316,6 +335,7 @@ gpio4: gpio@10015300 {
 				gpio5: gpio@10015400 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015400 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -326,6 +346,7 @@ gpio5: gpio@10015400 {
 				gpio6: gpio@10015500 {
 					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 					reg = <0x10015500 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
 					interrupts = <8>;
 					gpio-controller;
 					#gpio-cells = <2>;
@ -337,7 +358,7 @@ gpio6: gpio@10015500 {
 			audmux: audmux@10016000 {
 				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
 				reg = <0x10016000 0x1000>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX27_CLK_DUMMY>;
 				clock-names = "audmux";
 				status = "disabled";
 			};
@ -348,7 +369,8 @@ cspi3: cspi@10017000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -357,7 +379,8 @@ gpt4: timer@10019000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
-				clocks = <&clks 43>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -365,7 +388,8 @@ gpt5: timer@1001a000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
-				clocks = <&clks 42>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};

@ -373,7 +397,8 @@ uart5: serial@1001b000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001b000 0x1000>;
 				interrupts = <49>;
-				clocks = <&clks 77>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -382,7 +407,8 @@ uart6: serial@1001c000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1001c000 0x1000>;
 				interrupts = <48>;
-				clocks = <&clks 78>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -393,7 +419,7 @@ i2c2: i2c@1001d000 {
 				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
 				reg = <0x1001d000 0x1000>;
 				interrupts = <1>;
-				clocks = <&clks 39>;
+				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
 				status = "disabled";
 			};

@ -401,7 +427,8 @@ sdhci3: sdhci@1001e000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x1001e000 0x1000>;
 				interrupts = <9>;
-				clocks = <&clks 28>, <&clks 60>;
+				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
 				clock-names = "ipg", "per";
 				dmas = <&dma 36>;
 				dma-names = "rx-tx";
@ -412,7 +439,8 @@ gpt6: timer@1001f000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
-				clocks = <&clks 41>, <&clks 61>;
+				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
 				clock-names = "ipg", "per";
 			};
 		};
@ -428,7 +456,9 @@ fb: fb@10021000 {
 				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
 				interrupts = <61>;
 				reg = <0x10021000 0x1000>;
-				clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
+					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
+					 <&clks IMX27_CLK_PER3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
@ -437,7 +467,8 @@ coda: coda@10023000 {
 				compatible = "fsl,imx27-vpu";
 				reg = <0x10023000 0x0200>;
 				interrupts = <53>;
-				clocks = <&clks 57>, <&clks 66>;
+				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
+					 <&clks IMX27_CLK_VPU_AHB_GATE>;
 				clock-names = "per", "ahb";
 				iram = <&iram>;
 			};
@ -446,7 +477,7 @@ usbotg: usb@10024000 {
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks 75>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@ -455,7 +486,7 @@ usbh1: usb@10024200 {
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks 75>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
@ -464,7 +495,7 @@ usbh2: usb@10024400 {
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks 75>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
@ -473,14 +504,15 @@ usbmisc: usbmisc@10024600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks 62>;
+				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};

 			sahara2: sahara@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
 				interrupts = <59>;
-				clocks = <&clks 32>, <&clks 64>;
+				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 			};

@ -494,14 +526,15 @@ iim: iim@10028000 {
 				compatible = "fsl,imx27-iim";
 				reg = <0x10028000 0x1000>;
 				interrupts = <62>;
-				clocks = <&clks 38>;
+				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
 			};

 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;
-				clocks = <&clks 48>, <&clks 67>;
+				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
+					 <&clks IMX27_CLK_FEC_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
@ -513,7 +546,7 @@ nfc: nand@d8000000 {
 			compatible = "fsl,imx27-nand";
 			reg = <0xd8000000 0x1000>;
 			interrupts = <29>;
-			clocks = <&clks 54>;
+			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
 			status = "disabled";
 		};

@ -522,7 +555,7 @@ weim: weim@d8002000 {
 			#size-cells = <1>;
 			compatible = "fsl,imx27-weim";
 			reg = <0xd8002000 0x1000>;
-			clocks = <&clks 0>;
+			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
 			ranges = <
 				0 0 0xc0000000 0x08000000
 				1 0 0xc8000000 0x08000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@ -53,6 +53,17 @@ MX28_PAD_GPMI_RDY0__USB0_ID
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};

+				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c3 /*
+						MX28_PAD_PWM3__GPIO_3_28 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 			};

 			ssp0: ssp@80010000 {
@ -60,6 +71,7 @@ ssp0: ssp@80010000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a
 					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				vmmc-supply = <&reg_vddio_sd0>;
 				bus-width = <4>;
 				status = "okay";
 			};
@ -116,4 +128,14 @@ power {
 			default-state = "on";
 		};
 	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
 };
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "DENX M28";
+	compatible = "denx,m28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition@2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition@3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition@4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@68 {
+					compatible = "stm,m41t62";
+					reg = <0x68>;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@ -10,52 +10,14 @@
 */

 /dts-v1/;
-#include "imx28.dtsi"
+#include "imx28-m28.dtsi"

 / {
 	model = "DENX M28EVK";
 	compatible = "denx,m28evk", "fsl,imx28";

-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
 	apb@80000000 {
 		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0x00000000 0x00300000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "environment";
-					reg = <0x00300000 0x00080000>;
-				};
-
-				partition@2 {
-					label = "redundant-environment";
-					reg = <0x00380000 0x00080000>;
-				};
-
-				partition@3 {
-					label = "kernel";
-					reg = <0x00400000 0x00400000>;
-				};
-
-				partition@4 {
-					label = "filesystem";
-					reg = <0x00800000 0x0f800000>;
-				};
-			};
-
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
@ -175,10 +137,6 @@ saif1: saif@80046000 {
 			};

 			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
 				sgtl5000: codec@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
@ -192,11 +150,6 @@ eeprom: eeprom@51 {
 					reg = <0x51>;
 					pagesize = <32>;
 				};
-
-				rtc: rtc@68 {
-					compatible = "stm,m41t62";
-					reg = <0x68>;
-				};
 			};

 			lradc@80050000 {
@ -284,19 +237,6 @@ backlight {
 	};

 	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
 		reg_vddio_sd0: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@ -133,7 +133,6 @@ MX35_PAD_CTS2__UART2_CTS		0x1c5

 &ssi1 {
 	codec-handle = <&tlv320aic23>;
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@ -193,6 +193,14 @@ clks: ccm@53f80000 {
 				#clock-cells = <1>;
 			};

+			gpt: timer@53f90000 {
+				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 9>, <&clks 50>;
+				clock-names = "ipg", "per";
+			};
+
 			gpio3: gpio@53fa4000 {
 				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
 				reg = <0x53fa4000 0x4000>;
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@ -151,8 +151,10 @@ ssi2: ssi@50014000 {
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
 				};

@ -457,8 +459,10 @@ ssi1: ssi@63fcc000 {
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
-				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
 			};

--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@ -203,6 +203,7 @@ pmic: mc13892@0 {
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-rtc;

 		regulators {
 			sw1_reg: sw1 {
@ -392,7 +393,6 @@ MATRIX_KEY(3, 3, KEY_POWER)
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@ -255,7 +255,6 @@ MX51_PAD_EIM_CS3__GPIO2_28 0x1f5

 &ssi2 {
 	codec-handle = <&tlv320aic23>;
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@ -218,7 +218,6 @@ ssi2: ssi@70014000 {
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
 				};

@ -508,7 +507,6 @@ ssi1: ssi@83fcc000 {
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
-				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
 			};

@ -564,7 +562,6 @@ ssi3: ssi@83fe8000 {
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
-				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
 			};

--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "DENX M53";
+	compatible = "denx,imx53-m53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	stmpe610@41 {
+		compatible = "st,stmpe610";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "stm,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@ -10,17 +10,12 @@
 */

 /dts-v1/;
-#include "imx53.dtsi"
+#include "imx53-m53.dtsi"

 / {
 	model = "DENX M53EVK";
 	compatible = "denx,imx53-m53evk", "fsl,imx53";

-	memory {
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
 	display1: display@di1 {
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "bgr666";
@ -81,25 +76,6 @@ regulators {
 		#address-cells = <1>;
 		#size-cells = <0>;

-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
 		reg_usbh1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
@ -174,50 +150,6 @@ sgtl5000: codec@0a {
 	};
 };

-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	stmpe610@41 {
-		compatible = "st,stmpe610";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			reg = <0>;
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "stm,m41t62";
-		reg = <0x68>;
-	};
-};
-
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
@ -229,11 +161,8 @@ &iomuxc {
 	pinctrl-0 = <&pinctrl_hog>;

 	imx53-m53evk {
-		pinctrl_hog: hoggrp {
+		pinctrl_usb: usbgrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
 				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
 				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
 			>;
@ -302,13 +231,6 @@ MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
 			>;
 		};

-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
 		pinctrl_i2c3: i2c3grp {
 			fsl,pins = <
 				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
@ -353,26 +275,6 @@ MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
 			>;
 		};

-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
@ -408,14 +310,6 @@ &ipu_di1_disp1 {
 	remote-endpoint = <&display1_in>;
 };

-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
@ -427,7 +321,6 @@ &sata {
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

@ -450,6 +343,8 @@ &uart3 {
 };

 &usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	phy_type = "utmi";
 	status = "okay";
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@ -225,7 +225,6 @@ &uart1 {
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@ -141,7 +141,6 @@ &ipu_di0_disp0 {
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@ -502,7 +502,6 @@ &sdma {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	codec-handle = <&sgtl5000>;
 	status = "okay";
 };
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@ -154,6 +154,5 @@ &kpp {
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@ -108,7 +108,7 @@ sata: sata@10000000 {
 			clocks = <&clks IMX5_CLK_SATA_GATE>,
 				 <&clks IMX5_CLK_SATA_REF>,
 				 <&clks IMX5_CLK_AHB>;
-			clock-names = "sata_gate", "sata_ref", "ahb";
+			clock-names = "sata", "sata_ref", "ahb";
 			status = "disabled";
 		};

@ -231,7 +231,6 @@ ssi2: ssi@50014000 {
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
 				};

@ -260,6 +259,11 @@ esdhc4: esdhc@50024000 {
 				};
 			};

+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
+			};
+
 			usbphy0: usbphy@0 {
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
@ -572,6 +576,11 @@ aips@60000000 {	/* AIPS2 */
 			reg = <0x60000000 0x10000000>;
 			ranges;

+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
 			iim: iim@63f98000 {
 				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 				reg = <0x63f98000 0x4000>;
@ -661,7 +670,6 @@ ssi1: ssi@63fcc000 {
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
-				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
 			};

@ -689,7 +697,6 @@ ssi3: ssi@63fe8000 {
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
-				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
 			};

--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@ -0,0 +1,85 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		status = "okay";
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+		display0: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ipu_disp>;
+			status = "okay";
+
+			display-timings {
+				480x800p60 {
+					native-mode;
+					clock-frequency = <30000000>;
+					hactive = <480>;
+					vactive = <800>;
+					hfront-porch = <59>;
+					hback-porch = <10>;
+					hsync-len = <10>;
+					vback-porch = <15>;
+					vfront-porch = <15>;
+					vsync-len = <15>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+				};
+			};
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu1_di0_disp0>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@ -0,0 +1,74 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+		display0: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ipu_disp>;
+			status = "okay";
+
+			display-timings {
+				800x480p60 {
+					native-mode;
+					clock-frequency = <33246000>;
+					hactive = <800>;
+					vactive = <480>;
+					hfront-porch = <88>;
+					hback-porch = <88>;
+					hsync-len = <80>;
+					vback-porch = <10>;
+					vfront-porch = <10>;
+					vsync-len = <25>;
+					vsync-active = <1>;
+				};
+			};
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu1_di0_disp0>;
+				};
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@ -14,6 +14,6 @@
 #include "imx6qdl-gw51xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 DualLite GW51XX";
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
 	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
 };
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@ -14,6 +14,6 @@
 #include "imx6qdl-gw52xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 DualLite GW52XX";
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
 	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
 };
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@ -14,6 +14,6 @@
 #include "imx6qdl-gw53xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 DualLite GW53XX";
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
 	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
 };
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@ -14,6 +14,6 @@
 #include "imx6qdl-gw54xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
 	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
 };
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Basic i.MX6 Dual Lite Board";
+	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&ecspi3 {
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@ -254,7 +254,6 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

@ -335,10 +334,10 @@ &iomuxc {
 	imx6-riotboard {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x8000000
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x8000000
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x8000000
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x8000000
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
 			>;
 		};
@ -376,7 +375,7 @@ pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
 				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
 				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
 				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
@ -389,9 +388,9 @@ MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pu
 				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000	/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
 			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x80000000	/* AR8035 interrupt */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
@ -426,8 +425,8 @@ MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1

 		pinctrl_led: ledgrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x80000000	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x80000000	/* user led1 */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
 			>;
 		};

@ -493,8 +492,8 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x80000000	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
 			>;
 		};

@ -506,8 +505,8 @@ MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x80000000	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* SD2 WP */
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
 			>;
 		};

@ -519,8 +518,8 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x80000000	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x80000000	/* SD3 WP */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
 			>;
 		};

@ -532,7 +531,7 @@ MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
 				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
 				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
 				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x80000000	/* SD4 RST (eMMC) */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
 			>;
 		};
 	};
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@ -0,0 +1,150 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&i2c3 {
+	polytouch2: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6dl-tx6u-811x {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@ -10,7 +10,7 @@
 */
 /dts-v1/;
 #include "imx6dl.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"

 / {
 	model = "Wandboard i.MX6 Dual Lite Board";
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@ -35,8 +35,11 @@ cpu@0 {
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-				 <&clks 17>, <&clks 170>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_pfd2_396m", "step",
 				      "pll1_sw", "pll1_sys";
 			arm-supply = <&reg_arm>;
@ -56,7 +59,7 @@ soc {
 		ocram: sram@00900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
-			clocks = <&clks 142>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

 		aips1: aips-bus@02000000 {
@ -87,7 +90,7 @@ i2c4: i2c@021f8000 {
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021f8000 0x4000>;
 				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 116>;
+				clocks = <&clks IMX6DL_CLK_I2C4>;
 				status = "disabled";
 			};
 		};
@ -104,9 +107,9 @@ &hdmi {
 };

 &ldb {
-	clocks = <&clks 33>, <&clks 34>,
-		 <&clks 39>, <&clks 40>,
-		 <&clks 135>, <&clks 136>;
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
 	clock-names = "di0_pll", "di1_pll",
 		      "di0_sel", "di1_sel",
 		      "di0", "di1";
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@ -13,4 +13,8 @@ / {

 &sata {
 	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
 };
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@ -95,6 +95,12 @@ led-red {
 	};
 };

+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
 &ecspi5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi5>;
@ -118,6 +124,13 @@ &fec {
 	status = "okay";
 };

+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@ -274,6 +287,13 @@ rtc: m41t62@68 {
 	};
 };

+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@ -286,6 +306,13 @@ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 			>;
 		};

+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi5: ecspi5rp-1 {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
@ -316,6 +343,13 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};

+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
@ -323,6 +357,19 @@ MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
 			>;
 		};

+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+			>;
+		};
+
 		pinctrl_pfuze: pfuze100grp1 {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
@ -385,6 +432,13 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 	};
 };

+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 0>;
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@ -14,6 +14,6 @@
 #include "imx6qdl-gw51xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 Quad GW51XX";
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
 	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
 };
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@ -14,7 +14,7 @@
 #include "imx6qdl-gw52xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 Quad GW52XX";
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
 	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
 };

--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@ -14,7 +14,7 @@
 #include "imx6qdl-gw53xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 Quad GW53XX";
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
 	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
 };

--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@ -115,9 +115,9 @@ reg_usb_otg_vbus: regulator@3 {
 	};

 	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+		compatible = "fsl,imx6q-ventana-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
+		model = "sgtl5000-audio";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@ -504,7 +504,6 @@ eth1: sky2@8 { /* MAC/PHY on bus 8 */
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@ -14,7 +14,7 @@
 #include "imx6qdl-gw54xx.dtsi"

 / {
-	model = "Gateworks Ventana i.MX6 Quad GW54XX";
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
 	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
 };

--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@ -0,0 +1,34 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Pro i.MX6 Quad Board";
+	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&ecspi3 {
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf032b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@ -0,0 +1,136 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	imx6qdl-tx6 {
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@ -0,0 +1,210 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	imx6qdl-tx6 {
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6q-tx6q-1110 {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@ -23,6 +23,23 @@ chosen {
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+			gpio = <&gpio7 12 0>;
+		};
+	};
 };

 &fec {
@ -81,6 +98,13 @@ MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
 			>;
 		};

+		pinctrl_usbh: usbhgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@ -104,6 +128,14 @@ &uart2 {
 	status = "okay";
 };

+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	clocks = <&clks 201>;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@ -10,7 +10,7 @@
 */
 /dts-v1/;
 #include "imx6q.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"

 / {
 	model = "Wandboard i.MX6 Quad Board";
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@ -43,8 +43,11 @@ cpu@0 {
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-				 <&clks 17>, <&clks 170>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
 			clock-names = "arm", "pll2_pfd2_396m", "step",
 				      "pll1_sw", "pll1_sys";
 			arm-supply = <&reg_arm>;
@ -78,7 +81,7 @@ soc {
 		ocram: sram@00900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
-			clocks = <&clks 142>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};

 		aips-bus@02000000 { /* AIPS1 */
@ -89,7 +92,8 @@ ecspi5: ecspi@02018000 {
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 116>, <&clks 116>;
+					clocks = <&clks IMX6Q_CLK_ECSPI5>,
+						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@ -140,7 +144,9 @@ sata: sata@02200000 {
 			compatible = "fsl,imx6q-ahci";
 			reg = <0x02200000 0x4000>;
 			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
+			clocks = <&clks IMX6QDL_CLK_SATA>,
+				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+				 <&clks IMX6QDL_CLK_AHB>;
 			clock-names = "sata", "sata_ref", "ahb";
 			status = "disabled";
 		};
@ -152,10 +158,20 @@ ipu2: ipu@02800000 {
 			reg = <0x02800000 0x400000>;
 			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks 133>, <&clks 134>, <&clks 137>;
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>,
+				 <&clks IMX6QDL_CLK_IPU2_DI1>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 4>;

+			ipu2_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu2_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu2_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@ -230,9 +246,10 @@ hdmi_mux_3: endpoint {
 };

 &ldb {
-	clocks = <&clks 33>, <&clks 34>,
-		 <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>,
-		 <&clks 135>, <&clks 136>;
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
 	clock-names = "di0_pll", "di1_pll",
 		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
 		      "di0", "di1";
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@ -0,0 +1,418 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usbotg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 20 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	imx6qdl-aristainetos {
+		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+		};
+
+		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+			>;
+		};
+
+		pinctrl_ecspi4: ecspi4grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+				>;
+		};
+
+		pinctrl_gpio: gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu_disp: ipudisp1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+				>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+			>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@ -121,9 +121,9 @@ reg_usb_otg_vbus: regulator@4 {
 	};

 	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+		compatible = "fsl,imx6q-ventana-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
+		model = "sgtl5000-audio";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@ -489,7 +489,6 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@ -124,9 +124,9 @@ reg_usb_otg_vbus: regulator@4 {
 	};

 	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+		compatible = "fsl,imx6q-ventana-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
+		model = "sgtl5000-audio";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@ -533,7 +533,6 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@ -114,9 +114,9 @@ reg_usb_otg_vbus: regulator@3 {
 	};

 	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+		compatible = "fsl,imx6q-ventana-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
+		model = "sgtl5000-audio";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@ -555,12 +555,10 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@ -381,7 +381,6 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@ -301,6 +301,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
 	status = "disabled";
 };

--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@ -0,0 +1,357 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "at,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-rex {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				/* Phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				/* user led */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@ -381,7 +381,6 @@ &pwm4 {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@ -340,6 +340,7 @@ pinctrl_ecspi1: ecspi1grp {
 				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
 				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
 				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
 			>;
 		};

@ -512,7 +513,6 @@ &pwm1 {
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@ -0,0 +1,696 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		ethernet0 = &fec;
+		lcdif_23bit_pins_a = &pinctrl_disp0_1;
+		lcdif_24bit_pins_a = &pinctrl_disp0_2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		reg_can_xcvr = &reg_can_xcvr;
+		stk5led = &user_led;
+		usbotg = &usbotg;
+		sdhc0 = &usdhc1;
+		sdhc1 = &usdhc2;
+	};
+
+	memory {
+		reg = <0 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3_etn: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3_ETN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy_power>;
+			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_2v5: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2V5";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3v3: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			enable-active-low;
+		};
+
+		reg_lcd0_pwr: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "LCD0 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd0_pwr>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_lcd1_pwr: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LCD1 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd1_pwr>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usbotg_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "usbotg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg_vbus>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-supply = <&reg_3v3_etn>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-tx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
+				MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
+			>;
+		};
+
+		pinctrl_disp0_1: disp0grp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_disp0_2: disp0grp-2 {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
+				MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_etnphy_power: etnphy-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
+				MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
+				MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
+				MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
+				MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
+				MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
+				MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
+				MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
+			>;
+		};
+
+		pinctrl_lcd0_pwr: lcd0-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
+			>;
+		};
+
+		pinctrl_lcd1_pwr: lcd1-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
+				MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
+				MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
+			>;
+		};
+
+		pinctrl_usbotg_vbus: usbotg-vbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+				MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
+				MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
+		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
+		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
+		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
+		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
+		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
+		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
+		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
+		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
+		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
+		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
+	>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 2 0>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 3 0>;
+	fsl,wp-controller;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@ -0,0 +1,42 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */				
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@ -91,22 +91,8 @@ codec: sgtl5000@0a {

 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;

 	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	 0x80000000
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	 0x80000000
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
-			>;
-		};

 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
@ -233,7 +219,6 @@ &spdif {
 };

 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

@ -269,13 +254,6 @@ &usdhc1 {
 	status = "okay";
 };

-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
-
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@ -10,6 +10,7 @@
 * http://www.gnu.org/copyleft/gpl.html
 */

+#include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>

 #include "skeleton.dtsi"
@ -94,7 +95,7 @@ dma_apbh: dma-apbh@00110000 {
 			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
-			clocks = <&clks 106>;
+			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
 		};

 		gpmi: gpmi-nand@00112000 {
@ -105,8 +106,11 @@ gpmi: gpmi-nand@00112000 {
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "bch";
-			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-				 <&clks 150>, <&clks 149>;
+			clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+				 <&clks IMX6QDL_CLK_GPMI_APB>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6QDL_CLK_PER1_BCH>;
 			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 				      "gpmi_bch_apb", "per1_bch";
 			dmas = <&dma_apbh 0>;
@ -118,7 +122,7 @@ timer@00a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
-			clocks = <&clks 15>;
+			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};

 		L2: l2-cache@00a02000 {
@ -149,7 +153,9 @@ pcie: pcie@0x01000000 {
 			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
+				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy";
 			status = "disabled";
 		};
@ -180,11 +186,11 @@ spdif: spdif@02004000 {
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
-					clocks = <&clks 197>, <&clks 3>,
-						 <&clks 197>, <&clks 107>,
-						 <&clks 0>,   <&clks 118>,
-						 <&clks 0>,  <&clks 139>,
-						 <&clks 0>;
+					clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
@ -199,7 +205,8 @@ ecspi1: ecspi@02008000 {
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 112>, <&clks 112>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
@ -212,7 +219,8 @@ ecspi2: ecspi@0200c000 {
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 113>, <&clks 113>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
@ -225,7 +233,8 @@ ecspi3: ecspi@02010000 {
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 114>, <&clks 114>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
@ -238,7 +247,8 @@ ecspi4: ecspi@02014000 {
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 115>, <&clks 115>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
@ -249,7 +259,8 @@ uart1: serial@02020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 160>, <&clks 161>;
+					clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+						 <&clks IMX6QDL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 					dma-names = "rx", "tx";
@ -263,46 +274,40 @@ esai: esai@02024000 {

 				ssi1: ssi@02028000 {
 					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 178>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
 				};

 				ssi2: ssi@0202c000 {
 					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 179>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
 				};

 				ssi3: ssi@02030000 {
 					compatible = "fsl,imx6q-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks 180>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
 					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
 				};

@ -331,7 +336,8 @@ pwm1: pwm@02080000 {
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 62>, <&clks 145>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM1>;
 				clock-names = "ipg", "per";
 			};

@ -340,7 +346,8 @@ pwm2: pwm@02084000 {
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 62>, <&clks 146>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM2>;
 				clock-names = "ipg", "per";
 			};

@ -349,7 +356,8 @@ pwm3: pwm@02088000 {
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 62>, <&clks 147>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM3>;
 				clock-names = "ipg", "per";
 			};

@ -358,7 +366,8 @@ pwm4: pwm@0208c000 {
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 62>, <&clks 148>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM4>;
 				clock-names = "ipg", "per";
 			};

@ -366,7 +375,8 @@ can1: flexcan@02090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 108>, <&clks 109>;
+				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -375,7 +385,8 @@ can2: flexcan@02094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 110>, <&clks 111>;
+				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@ -384,7 +395,8 @@ gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 119>, <&clks 120>;
+				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+					 <&clks IMX6QDL_CLK_GPT_IPG_PER>;
 				clock-names = "ipg", "per";
 			};

@ -466,22 +478,25 @@ gpio7: gpio@020b4000 {
 			};

 			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
 			};

 			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX6QDL_CLK_DUMMY>;
 			};

 			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 0>;
+				clocks = <&clks IMX6QDL_CLK_DUMMY>;
 				status = "disabled";
 			};

@ -599,14 +614,14 @@ tempmon: tempmon {
 				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,tempmon = <&anatop>;
 				fsl,tempmon-data = <&ocotp>;
-				clocks = <&clks 172>;
+				clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 			};

 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 182>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
 				fsl,anatop = <&anatop>;
 			};

@ -614,7 +629,7 @@ usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 183>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
 				fsl,anatop = <&anatop>;
 			};

@ -727,7 +742,8 @@ hdmi: hdmi@0120000 {
 				reg = <0x00120000 0x9000>;
 				interrupts = <0 115 0x04>;
 				gpr = <&gpr>;
-				clocks = <&clks 123>, <&clks 124>;
+				clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+					 <&clks IMX6QDL_CLK_HDMI_ISFR>;
 				clock-names = "iahb", "isfr";
 				status = "disabled";

@ -762,7 +778,8 @@ sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 155>, <&clks 155>;
+				clocks = <&clks IMX6QDL_CLK_SDMA>,
+					 <&clks IMX6QDL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
@ -790,7 +807,7 @@ usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 162>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
@ -800,7 +817,7 @@ usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 162>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
@ -810,7 +827,7 @@ usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 162>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
@ -819,7 +836,7 @@ usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 162>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
@ -828,7 +845,7 @@ usbmisc: usbmisc@02184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
-				clocks = <&clks 162>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 			};

 			fec: ethernet@02188000 {
@ -837,7 +854,9 @@ fec: ethernet@02188000 {
 				interrupts-extended =
 					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
 					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+				clocks = <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
@ -853,7 +872,9 @@ usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clocks = <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				status = "disabled";
@ -863,7 +884,9 @@ usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clocks = <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				status = "disabled";
@ -873,7 +896,9 @@ usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clocks = <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				status = "disabled";
@ -883,7 +908,9 @@ usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clocks = <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
 				status = "disabled";
@ -895,7 +922,7 @@ i2c1: i2c@021a0000 {
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 125>;
+				clocks = <&clks IMX6QDL_CLK_I2C1>;
 				status = "disabled";
 			};

@ -905,7 +932,7 @@ i2c2: i2c@021a4000 {
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 126>;
+				clocks = <&clks IMX6QDL_CLK_I2C2>;
 				status = "disabled";
 			};

@ -915,7 +942,7 @@ i2c3: i2c@021a8000 {
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 127>;
+				clocks = <&clks IMX6QDL_CLK_I2C3>;
 				status = "disabled";
 			};

@ -936,7 +963,7 @@ weim: weim@021b8000 {
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 196>;
+				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
 			};

 			ocotp: ocotp@021bc000 {
@ -996,7 +1023,8 @@ uart2: serial@021e8000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 160>, <&clks 161>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 				dma-names = "rx", "tx";
@ -1007,7 +1035,8 @@ uart3: serial@021ec000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 160>, <&clks 161>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 				dma-names = "rx", "tx";
@ -1018,7 +1047,8 @@ uart4: serial@021f0000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 160>, <&clks 161>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 				dma-names = "rx", "tx";
@ -1029,7 +1059,8 @@ uart5: serial@021f4000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks 160>, <&clks 161>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
 				dma-names = "rx", "tx";
@ -1044,10 +1075,20 @@ ipu1: ipu@02400000 {
 			reg = <0x02400000 0x400000>;
 			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>,
+				 <&clks IMX6QDL_CLK_IPU1_DI1>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;

+			ipu1_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu1_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu1_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@ -116,8 +116,9 @@ flash: m25p80@0 {
 };

 &fec {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
 	phy-mode = "rmii";
 	status = "okay";
 };
@ -300,6 +301,19 @@ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
 			>;
 		};

+		pinctrl_fec_sleep: fecgrp-sleep {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
@ -475,7 +489,6 @@ MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
 };

 &ssi2 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };

--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@ -227,8 +227,7 @@ uart2: serial@02024000 {

 				ssi1: ssi@02028000 {
 					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
@ -241,8 +240,7 @@ ssi1: ssi@02028000 {

 				ssi2: ssi@0202c000 {
 					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
@ -255,8 +253,7 @@ ssi2: ssi@0202c000 {

 				ssi3: ssi@02030000 {
 					compatible = "fsl,imx6sl-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
+							"fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
@ -403,6 +400,7 @@ kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
+				status = "disabled";
 			};

 			wdog1: wdog@020bc000 {
@ -607,7 +605,7 @@ spdc: spdc@020e8000 {
 			};

 			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_SDMA>,
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_psu_5v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PSU-5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c1>;
+        status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c4>;
+        status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@ -14,6 +14,8 @@

 / {
 	aliases {
+		can0 = &can0;
+		can1 = &can1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@ -103,6 +105,16 @@ edma0: dma-controller@40018000 {
 					<&clks VF610_CLK_DMAMUX1>;
 			};

+			can0: flexcan@40020000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x40020000 0x4000>;
+				interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN0>,
+					 <&clks VF610_CLK_FLEXCAN0>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
 			uart0: serial@40027000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40027000 0x1000>;
@ -362,7 +374,7 @@ adc1: adc@400bb000 {

 			esdhc1: esdhc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
-				reg = <0x400b2000 0x4000>;
+				reg = <0x400b2000 0x1000>;
 				interrupts = <0 28 0x04>;
 				clocks = <&clks VF610_CLK_IPG_BUS>,
 					<&clks VF610_CLK_PLATFORM_BUS>,
@ -405,6 +417,17 @@ fec1: ethernet@400d1000 {
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
+
+			can1: flexcan@400d4000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x400d4000 0x4000>;
+				interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN1>,
+					 <&clks VF610_CLK_FLEXCAN1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
 		};
 	};
 };
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@ -1,6 +1,7 @@
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
@ -35,10 +36,8 @@ CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
 CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MACH_IMX27_DT=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@ -159,6 +158,8 @@ CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@ -1,5 +1,6 @@
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
@ -31,11 +32,12 @@ CONFIG_MACH_IMX35_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
 CONFIG_PCI=y
 CONFIG_PCI_IMX6=y
@ -67,6 +69,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
@ -160,6 +164,7 @@ CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
+CONFIG_GPIO_STMPE=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@ -242,6 +247,7 @@ CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
+CONFIG_FSL_EDMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
 CONFIG_DRM_IMX_FB_HELPER=y
@ -288,6 +294,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -27,7 +27,7 @@ CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@ -1,4 +1,5 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@ -65,18 +65,8 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool

-config ARCH_MX1
-	bool
-
-config ARCH_MX25
-	bool
-
-config MACH_MX27
-	bool
-
 config SOC_IMX1
 	bool
-	select ARCH_MX1
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@ -89,7 +79,6 @@ config SOC_IMX21

 config SOC_IMX25
 	bool
-	select ARCH_MX25
 	select ARCH_MXC_IOMUX_V3
 	select CPU_ARM926T
 	select MXC_AVIC
@ -100,7 +89,6 @@ config SOC_IMX27
 	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
-	select MACH_MX27
 	select MXC_AVIC
 	select PINCTRL_IMX27

@ -119,18 +107,6 @@ config SOC_IMX35
 	select PINCTRL_IMX35
 	select SMP_ON_UP if SMP

-config SOC_IMX5
-	bool
-	select ARCH_HAS_OPP
-	select ARCH_MXC_IOMUX_V3
-	select MXC_TZIC
-
-config	SOC_IMX51
-	bool
-	select HAVE_IMX_SRC
-	select PINCTRL_IMX51
-	select SOC_IMX5
-
 if ARCH_MULTI_V4T

 comment "MX1 platforms:"
@ -366,15 +342,6 @@ config MACH_IMX27_VISSTRIM_M10
 	  This includes specific configurations for the board and its
 	  peripherals.

-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@ -406,15 +373,6 @@ config MACH_MXT_TD60
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.

-config MACH_IMX27IPCAM
-	bool "IMX27 IPCAM platform"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for IMX27 IPCAM platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27
@ -700,24 +658,29 @@ if ARCH_MULTI_V7

 comment "Device tree only"

+config SOC_IMX5
+	bool
+	select ARCH_HAS_OPP
+	select HAVE_IMX_SRC
+	select MXC_TZIC
+
 config	SOC_IMX50
 	bool "i.MX50 support"
-	select HAVE_IMX_SRC
 	select PINCTRL_IMX50
 	select SOC_IMX5

 	help
 	  This enables support for Freescale i.MX50 processor.

-config MACH_IMX51_DT
+config SOC_IMX51
 	bool "i.MX51 support"
-	select SOC_IMX51
+	select PINCTRL_IMX51
+	select SOC_IMX5
 	help
 	  This enables support for Freescale i.MX51 processor

 config	SOC_IMX53
 	bool "i.MX53 support"
-	select HAVE_IMX_SRC
 	select PINCTRL_IMX53
 	select SOC_IMX5

@ -734,8 +697,6 @@ config SOC_IMX6
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select MFD_SYSCON
-	select PL310_ERRATA_588369 if CACHE_L2X0
-	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0

 config SOC_IMX6Q
@ -771,8 +732,6 @@ config SOC_VF610
 	select ARM_GIC
 	select PINCTRL_VF610
 	select VF_PIT_TIMER
-	select PL310_ERRATA_588369 if CACHE_L2X0
-	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0

 	help
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o

 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)

 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \
@ -31,6 +31,8 @@ ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+# i.MX6SX reuses i.MX6Q cpuidle driver
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
 endif

 ifdef CONFIG_SND_IMX_SOC
@ -38,9 +40,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif

-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
 # i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
@ -60,13 +59,11 @@ obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
 obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o

 # i.MX31 based machines
@ -109,8 +106,8 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o

-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
+obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o

 obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@ -15,100 +15,103 @@
 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
 */

-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>

 #include "clk.h"
 #include "common.h"
 #include "hardware.h"

-/* CCM register addresses */
-#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-#define CCM_CSCR	IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
-#define CCM_PCDR	IO_ADDR_CCM(0x20)
-
-/* SCM register addresses */
-#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-#define SCM_GCCR	IO_ADDR_SCM(0xc)
-
 static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
 static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
 				       "prem", "fclk", };

-enum imx1_clks {
-	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
-	spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
-	uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
-	usbd_gate, clk_max
-};
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;

-static struct clk *clk[clk_max];
+static void __iomem *ccm __initdata;
+#define CCM_CSCR	(ccm + 0x0000)
+#define CCM_MPCTL0	(ccm + 0x0004)
+#define CCM_SPCTL0	(ccm + 0x000c)
+#define CCM_PCDR	(ccm + 0x0020)
+#define SCM_GCCR	(ccm + 0x0810)
+
+static void __init _mx1_clocks_init(unsigned long fref)
+{
+	clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+	clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+	clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+	clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+	clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+	clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+	clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+	clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+	clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+	clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+	clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+	clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+	clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+	clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+	clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+	clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+	clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+	clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+	clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+	clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+	clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+	clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+}

 int __init mx1_clocks_init(unsigned long fref)
 {
-	int i;
+	ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);

-	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[clk32] = imx_clk_fixed("clk32", fref);
-	clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
-	clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
-	clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
-	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
-			ARRAY_SIZE(prem_sel_clks));
-	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
-	clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
-	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
-	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
-	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
-	clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
-	clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
-	clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
-	clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
-	clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
-	clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
-	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
-			ARRAY_SIZE(clko_sel_clks));
-	clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
-	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
-	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
-	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
-	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
-	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
-	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+	_mx1_clocks_init(fref);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("imx1 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
-
-	clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
-	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
-	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
-	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
-	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
-	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+	clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");

 	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);

 	return 0;
 }
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+	ccm = of_iomap(np, 0);
+	BUG_ON(!ccm);
+
+	_mx1_clocks_init(32768);
+
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@ -7,178 +7,165 @@
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
 */

 #include <linux/clk.h>
-#include <linux/clkdev.h>
 #include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/err.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx21-clock.h>

 #include "clk.h"
 #include "common.h"
 #include "hardware.h"

-#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;

 /* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+#define CCM_CSCR	(ccm + 0x00)
+#define CCM_MPCTL0	(ccm + 0x04)
+#define CCM_SPCTL0	(ccm + 0x0c)
+#define CCM_PCDR0	(ccm + 0x18)
+#define CCM_PCDR1	(ccm + 0x1c)
+#define CCM_PCCR0	(ccm + 0x20)
+#define CCM_PCCR1	(ccm + 0x24)

-static const char *mpll_sel_clks[] = { "fpm", "ckih", };
-static const char *spll_sel_clks[] = { "fpm", "ckih", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };

-enum imx21_clks {
-	ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
-	per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
-	uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
-	pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
-	lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
-	per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
-	ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
-	emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
-	gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
-};
+static struct clk *clk[IMX21_CLK_MAX];
+static struct clk_onecell_data clk_data;

-static struct clk *clk[clk_max];
+static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	BUG_ON(!ccm);
+
+	clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
+	clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
+	clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+	clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+
+	clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+	clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+	clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
+	clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+	clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+	clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+	clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+	clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+	clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
+	clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
+	clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
+
+	clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+
+	clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+
+	clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
+	clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+	clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+
+	clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
+	clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
+	clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
+	clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
+
+	clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+	clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+	clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+	clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+	clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+	clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+	clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+	clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+	clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
+	clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
+	clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+	clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+	clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+	clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
+	clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+	clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
+	clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+	clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+	clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+	clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+	clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+
+	clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+	clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+	clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+	clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+	clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+}

-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
 int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 {
-	int i;
+	ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);

-	clk[ckil] = imx_clk_fixed("ckil", lref);
-	clk[ckih] = imx_clk_fixed("ckih", href);
-	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
-	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
-			ARRAY_SIZE(mpll_sel_clks));
-	clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
-			ARRAY_SIZE(spll_sel_clks));
-	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
-	clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
-	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
-	clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
-	clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
-	clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
-	clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
-	clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
-	clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
-	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
-	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
-	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
-	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
-	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
-	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
-	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
-	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
-	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
-	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
-	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
-	clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
-	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
-	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
-	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
-	clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
-	clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
-	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
-	clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
-	clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
-	clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
-	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
-	clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
-	clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
-	clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
-	clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
-	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
-	clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
-	clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
-	clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
-	clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
-	clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
-	clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
-	clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
-	clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
-	clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
-	clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+	_mx21_clocks_init(lref, href);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX21 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
-
-	clk_register_clkdev(clk[per1], "per1", NULL);
-	clk_register_clkdev(clk[per2], "per2", NULL);
-	clk_register_clkdev(clk[per3], "per3", NULL);
-	clk_register_clkdev(clk[per4], "per4", NULL);
-	clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
-	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
-	clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
-	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
-	clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
-	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
-	clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
-	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
-	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
-	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
-	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
-	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
-	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
-	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
-	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
-	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
-	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
-	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
-	clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
-	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
-	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
-	clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
-	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
-	clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
-	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
-	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
-	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
-	clk_register_clkdev(clk[brom_gate], "brom", NULL);
-	clk_register_clkdev(clk[emma_gate], "emma", NULL);
-	clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
-	clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
-	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
-	clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
-	clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
-	clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
-	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
-	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+	clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
+	clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
+	clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
+	clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
+	clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
+	clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
+	clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
+	clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
+	clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
+	clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
+	clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
+	clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");

 	mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);

 	return 0;
 }
+
+static void __init mx21_clocks_init_dt(struct device_node *np)
+{
+	ccm = of_iomap(np, 0);
+
+	_mx21_clocks_init(32768, 26000000);
+
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@ -32,8 +32,6 @@
 #include "hardware.h"
 #include "mx25.h"

-#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
 #define CCM_MPCTL	0x00
 #define CCM_UPCTL	0x04
 #define CCM_CCTL	0x08
@ -56,7 +54,7 @@
 #define CCM_LTR3	0x4c
 #define CCM_MCR		0x64

-#define ccm(x)	(CRM_BASE + (x))
+#define ccm(x)	(ccm_base + (x))

 static struct clk_onecell_data clk_data;

@ -91,9 +89,10 @@ enum mx25_clks {

 static struct clk *clk[clk_max];

-static int __init __mx25_clocks_init(unsigned long osc_rate)
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+				     void __iomem *ccm_base)
 {
-	int i;
+	BUG_ON(!ccm_base);

 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[osc] = imx_clk_fixed("osc", osc_rate);
@ -224,19 +223,13 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 	/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
 	clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX25 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	clk_prepare_enable(clk[emi_ahb]);

 	/* Clock source for gpt must be derived from AHB */
 	clk_set_parent(clk[per5_sel], clk[ahb]);

-	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-
 	/*
 	 * Let's initially set up CLKO parent as ipg, since this configuration
 	 * is used on some imx25 board designs to clock the audio codec.
@ -248,8 +241,14 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)

 int __init mx25_clocks_init(void)
 {
-	__mx25_clocks_init(24000000);
+	void __iomem *ccm;

+	ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
+
+	__mx25_clocks_init(24000000, ccm);
+
+	clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 	/* i.mx25 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
 	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@ -314,29 +313,27 @@ int __init mx25_clocks_init(void)
 	return 0;
 }

-int __init mx25_clocks_init_dt(void)
+static void __init mx25_clocks_init_dt(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *refnp;
 	unsigned long osc_rate = 24000000;
+	void __iomem *ccm;

 	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
+	for_each_compatible_node(refnp, NULL, "fixed-clock") {
 		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
+		if (of_property_read_u32(refnp, "clock-frequency", &rate))
 			continue;

-		if (of_device_is_compatible(np, "fsl,imx-osc"))
+		if (of_device_is_compatible(refnp, "fsl,imx-osc"))
 			osc_rate = rate;
 	}

-	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+	ccm = of_iomap(np, 0);
+	__mx25_clocks_init(osc_rate, ccm);
+
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
-	__mx25_clocks_init(osc_rate);
-
-	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
-
-	return 0;
 }
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@ -1,61 +1,36 @@
 #include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx27-clock.h>

 #include "clk.h"
 #include "common.h"
 #include "hardware.h"

-#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;

 /* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS	(1 << 31)
-#define CCM_CSCR_SSI2		(1 << 23)
-#define CCM_CSCR_SSI1		(1 << 22)
-#define CCM_CSCR_VPU		(1 << 21)
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
+#define CCM_CSCR		(ccm + 0x00)
+#define CCM_MPCTL0		(ccm + 0x04)
+#define CCM_MPCTL1		(ccm + 0x08)
+#define CCM_SPCTL0		(ccm + 0x0c)
+#define CCM_SPCTL1		(ccm + 0x10)
+#define CCM_PCDR0		(ccm + 0x18)
+#define CCM_PCDR1		(ccm + 0x1c)
+#define CCM_PCCR0		(ccm + 0x20)
+#define CCM_PCCR1		(ccm + 0x24)
+#define CCM_CCSR		(ccm + 0x28)

 static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
 static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
 static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
-static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
 static const char *clko_sel_clks[] = {
-	"ckil", "fpm", "ckih", "ckih",
-	"ckih", "mpll", "spll", "cpu_div",
+	"ckil", "fpm", "ckih_gate", "ckih_gate",
+	"ckih_gate", "mpll", "spll", "cpu_div",
 	"ahb", "ipg", "per1_div", "per2_div",
 	"per3_div", "per4_div", "ssi1_div", "ssi2_div",
 	"nfc_div", "mshc_div", "vpu_div", "60m",
@ -64,239 +39,220 @@ static const char *clko_sel_clks[] = {

 static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };

-enum mx27_clks {
-	dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
-	per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
-	clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
-	clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
-	sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
-	rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
-	kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
-	gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
-	gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
-	emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
-	cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
-	vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
-	usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
-	vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
-	csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
-	uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
-	uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
-	mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
-	rtic_ahb_gate, mshc_baud_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX27_CLK_MAX];
 static struct clk_onecell_data clk_data;

+static void __init _mx27_clocks_init(unsigned long fref)
+{
+	BUG_ON(!ccm);
+
+	clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
+	clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
+	clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+	clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+	clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+	clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+	clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+	clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+	clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0);
+	clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+	clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+		clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+		clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+	} else {
+		clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+		clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+	}
+
+	clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
+	clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+	clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+	clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+	clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+	clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+	clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+	clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+	clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+	clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+	clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+		clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+	else
+		clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+
+	clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+	clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+	clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+	clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+	clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+	clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+	clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
+	clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+	clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+	clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
+	clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+	clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+	clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+	clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+	clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+	clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+	clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+	clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+	clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+	clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+	clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+	clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+	clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+	clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+	clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+	clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+	clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+	clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
+	clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1,  3);
+	clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1,  4);
+	clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1,  5);
+	clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1,  6);
+	clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1,  7);
+	clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1,  8);
+	clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1,  9);
+	clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+	clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+	clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+	clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+	clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
+	clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+	clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+	clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+	clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+	clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+	clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+	clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+	clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+	clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+	clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+	clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+	clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+	clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+	imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+	clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
+
+	clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
+
+	imx_print_silicon_rev("i.MX27", mx27_revision());
+}
+
 int __init mx27_clocks_init(unsigned long fref)
 {
-	int i;
-	struct device_node *np;
+	ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);

-	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[ckih] = imx_clk_fixed("ckih", fref);
-	clk[ckil] = imx_clk_fixed("ckil", 32768);
-	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
-	clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3);
+	_mx27_clocks_init(fref);

-	clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1,
-			mpll_osc_sel_clks,
-			ARRAY_SIZE(mpll_osc_sel_clks));
-	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
-			ARRAY_SIZE(mpll_sel_clks));
-	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
-	clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
-	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
-	clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
-		clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
-	} else {
-		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
-		clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
-	}
-
-	clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
-	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
-	clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
-	clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
-	clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
-	clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
-	clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
-	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
-	clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
-	clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
-	clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
-	else
-		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
-	clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
-	clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
-	clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
-	clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
-	clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
-	clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
-	clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
-	clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
-	clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
-	clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
-	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
-	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
-	clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
-	clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
-	clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
-	clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
-	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
-	clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
-	clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
-	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
-	clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
-	clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
-	clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
-	clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
-	clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
-	clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
-	clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
-	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
-	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
-	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
-	clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
-	clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
-	clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
-	clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
-	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
-	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
-	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
-	clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
-	clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1,  3);
-	clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1,  4);
-	clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1,  5);
-	clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1,  6);
-	clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1,  7);
-	clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1,  8);
-	clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1,  9);
-	clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
-	clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
-	clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
-	clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
-	clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
-	clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
-	clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
-	clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
-	clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
-	clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
-	clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
-	clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
-	clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
-	clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
-	clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
-	clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
-	clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
-	clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
-	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
-	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
-	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
-	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
-
-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX27 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
-	if (np) {
-		clk_data.clks = clk;
-		clk_data.clk_num = ARRAY_SIZE(clk);
-		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-	}
-
-	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
-	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
-	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
-	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
-	clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
-	clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
-	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
-	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
-	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
-	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
-	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
-	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
-	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
-	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
-	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
-	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
-	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
-	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
-	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
-	clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
-	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
-	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
-	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
-	clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
-	clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
-	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
-	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
-	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
-	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
-	clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
-	clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
-	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
-	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
-	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
-	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
-	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
-	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
-	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
-	clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
+	clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
+	clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
+	clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
+	clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
+	clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
+	clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
+	clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
+	clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
+	clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
+	clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
+	clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
+	clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
+	clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
+	clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
+	clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
+	clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
+	clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
+	clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
+	clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
+	clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
+	clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
+	clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
+	clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");

 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);

-	clk_prepare_enable(clk[emi_ahb_gate]);
-
-	imx_print_silicon_rev("i.MX27", mx27_revision());
-
 	return 0;
 }

-int __init mx27_clocks_init_dt(void)
+static void __init mx27_clocks_init_dt(struct device_node *np)
 {
-	struct device_node *np;
+	struct device_node *refnp;
 	u32 fref = 26000000; /* default */

-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+	for_each_compatible_node(refnp, NULL, "fixed-clock") {
+		if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
 			continue;

-		if (!of_property_read_u32(np, "clock-frequency", &fref))
+		if (!of_property_read_u32(refnp, "clock-frequency", &fref))
 			break;
 	}

-	return mx27_clocks_init(fref);
+	ccm = of_iomap(np, 0);
+
+	_mx27_clocks_init(fref);
+
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 }
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@ -51,7 +51,6 @@ static struct clk_onecell_data clk_data;
 int __init mx31_clocks_init(unsigned long fref)
 {
 	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
-	int i;
 	struct device_node *np;

 	clk[dummy] = imx_clk_fixed("dummy", 0);
@ -114,10 +113,7 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
 	clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("imx31 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");

--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@ -75,7 +75,6 @@ int __init mx35_clocks_init(void)
 	u32 pdr0, consumer_sel, hsp_sel;
 	struct arm_ahb_div *aad;
 	unsigned char *hsp_div;
-	u32 i;

 	pdr0 = __raw_readl(base + MXC_CCM_PDR0);
 	consumer_sel = (pdr0 >> 16) & 0xf;
@ -200,10 +199,7 @@ int __init mx35_clocks_init(void)
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
 	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX35 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
 	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@ -18,11 +18,54 @@
 #include <linux/of_irq.h>
 #include <dt-bindings/clock/imx5-clock.h>

-#include "crm-regs-imx5.h"
 #include "clk.h"
 #include "common.h"
 #include "hardware.h"

+#define MX51_DPLL1_BASE		0x83f80000
+#define MX51_DPLL2_BASE		0x83f84000
+#define MX51_DPLL3_BASE		0x83f88000
+
+#define MX53_DPLL1_BASE		0x63f80000
+#define MX53_DPLL2_BASE		0x63f84000
+#define MX53_DPLL3_BASE		0x63f88000
+#define MX53_DPLL4_BASE		0x63f8c000
+
+#define MXC_CCM_CCR		(ccm_base + 0x00)
+#define MXC_CCM_CCDR		(ccm_base + 0x04)
+#define MXC_CCM_CSR		(ccm_base + 0x08)
+#define MXC_CCM_CCSR		(ccm_base + 0x0c)
+#define MXC_CCM_CACRR		(ccm_base + 0x10)
+#define MXC_CCM_CBCDR		(ccm_base + 0x14)
+#define MXC_CCM_CBCMR		(ccm_base + 0x18)
+#define MXC_CCM_CSCMR1		(ccm_base + 0x1c)
+#define MXC_CCM_CSCMR2		(ccm_base + 0x20)
+#define MXC_CCM_CSCDR1		(ccm_base + 0x24)
+#define MXC_CCM_CS1CDR		(ccm_base + 0x28)
+#define MXC_CCM_CS2CDR		(ccm_base + 0x2c)
+#define MXC_CCM_CDCDR		(ccm_base + 0x30)
+#define MXC_CCM_CHSCDR		(ccm_base + 0x34)
+#define MXC_CCM_CSCDR2		(ccm_base + 0x38)
+#define MXC_CCM_CSCDR3		(ccm_base + 0x3c)
+#define MXC_CCM_CSCDR4		(ccm_base + 0x40)
+#define MXC_CCM_CWDR		(ccm_base + 0x44)
+#define MXC_CCM_CDHIPR		(ccm_base + 0x48)
+#define MXC_CCM_CDCR		(ccm_base + 0x4c)
+#define MXC_CCM_CTOR		(ccm_base + 0x50)
+#define MXC_CCM_CLPCR		(ccm_base + 0x54)
+#define MXC_CCM_CISR		(ccm_base + 0x58)
+#define MXC_CCM_CIMR		(ccm_base + 0x5c)
+#define MXC_CCM_CCOSR		(ccm_base + 0x60)
+#define MXC_CCM_CGPR		(ccm_base + 0x64)
+#define MXC_CCM_CCGR0		(ccm_base + 0x68)
+#define MXC_CCM_CCGR1		(ccm_base + 0x6c)
+#define MXC_CCM_CCGR2		(ccm_base + 0x70)
+#define MXC_CCM_CCGR3		(ccm_base + 0x74)
+#define MXC_CCM_CCGR4		(ccm_base + 0x78)
+#define MXC_CCM_CCGR5		(ccm_base + 0x7c)
+#define MXC_CCM_CCGR6		(ccm_base + 0x80)
+#define MXC_CCM_CCGR7		(ccm_base + 0x84)
+
 /* Low-power Audio Playback Mode clock */
 static const char *lp_apm_sel[] = { "osc", };

@ -86,17 +129,15 @@ static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
 static struct clk *clk[IMX5_CLK_END];
 static struct clk_onecell_data clk_data;

-static void __init mx5_clocks_common_init(unsigned long rate_ckil,
-		unsigned long rate_osc, unsigned long rate_ckih1,
-		unsigned long rate_ckih2)
+static void __init mx5_clocks_common_init(void __iomem *ccm_base)
 {
-	int i;
+	imx5_pm_set_ccm_base(ccm_base);

 	clk[IMX5_CLK_DUMMY]		= imx_clk_fixed("dummy", 0);
-	clk[IMX5_CLK_CKIL]		= imx_obtain_fixed_clock("ckil", rate_ckil);
-	clk[IMX5_CLK_OSC]		= imx_obtain_fixed_clock("osc", rate_osc);
-	clk[IMX5_CLK_CKIH1]		= imx_obtain_fixed_clock("ckih1", rate_ckih1);
-	clk[IMX5_CLK_CKIH2]		= imx_obtain_fixed_clock("ckih2", rate_ckih2);
+	clk[IMX5_CLK_CKIL]		= imx_obtain_fixed_clock("ckil", 0);
+	clk[IMX5_CLK_OSC]		= imx_obtain_fixed_clock("osc", 0);
+	clk[IMX5_CLK_CKIH1]		= imx_obtain_fixed_clock("ckih1", 0);
+	clk[IMX5_CLK_CKIH2]		= imx_obtain_fixed_clock("ckih2", 0);

 	clk[IMX5_CLK_PERIPH_APM]	= imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
 						periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
@ -244,58 +285,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[IMX5_CLK_SAHARA_IPG_GATE]	= imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
 	clk[IMX5_CLK_SATA_REF]		= imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX5 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
-
-	clk_register_clkdev(clk[IMX5_CLK_GPT_HF_GATE], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX5_CLK_GPT_IPG_GATE], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX5_CLK_UART1_PER_GATE], "per", "imx21-uart.0");
-	clk_register_clkdev(clk[IMX5_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
-	clk_register_clkdev(clk[IMX5_CLK_UART2_PER_GATE], "per", "imx21-uart.1");
-	clk_register_clkdev(clk[IMX5_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
-	clk_register_clkdev(clk[IMX5_CLK_UART3_PER_GATE], "per", "imx21-uart.2");
-	clk_register_clkdev(clk[IMX5_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
-	clk_register_clkdev(clk[IMX5_CLK_UART4_PER_GATE], "per", "imx21-uart.3");
-	clk_register_clkdev(clk[IMX5_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
-	clk_register_clkdev(clk[IMX5_CLK_UART5_PER_GATE], "per", "imx21-uart.4");
-	clk_register_clkdev(clk[IMX5_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
-	clk_register_clkdev(clk[IMX5_CLK_ECSPI1_PER_GATE], "per", "imx51-ecspi.0");
-	clk_register_clkdev(clk[IMX5_CLK_ECSPI1_IPG_GATE], "ipg", "imx51-ecspi.0");
-	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
-	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
-	clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
-	clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.0");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.0");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.1");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.1");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.1");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "imx-udc-mx51");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "imx-udc-mx51");
-	clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "imx-udc-mx51");
-	clk_register_clkdev(clk[IMX5_CLK_NFC_GATE], NULL, "imx51-nand");
-	clk_register_clkdev(clk[IMX5_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
-	clk_register_clkdev(clk[IMX5_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
-	clk_register_clkdev(clk[IMX5_CLK_SSI3_IPG_GATE], NULL, "imx-ssi.2");
-	clk_register_clkdev(clk[IMX5_CLK_SDMA_GATE], NULL, "imx35-sdma");
 	clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
-	clk_register_clkdev(clk[IMX5_CLK_IIM_GATE], "iim", NULL);
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.1");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx-keypad");
-	clk_register_clkdev(clk[IMX5_CLK_IPU_DI1_GATE], "di1", "imx-tve.0");
 	clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
-	clk_register_clkdev(clk[IMX5_CLK_EPIT1_IPG_GATE], "ipg", "imx-epit.0");
-	clk_register_clkdev(clk[IMX5_CLK_EPIT1_HF_GATE], "per", "imx-epit.0");
-	clk_register_clkdev(clk[IMX5_CLK_EPIT2_IPG_GATE], "ipg", "imx-epit.1");
-	clk_register_clkdev(clk[IMX5_CLK_EPIT2_HF_GATE], "per", "imx-epit.1");

 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
@ -322,12 +313,26 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,

 static void __init mx50_clocks_init(struct device_node *np)
 {
+	void __iomem *ccm_base;
+	void __iomem *pll_base;
 	unsigned long r;
-	int i;

-	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
-	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
-	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+	pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+	ccm_base = of_iomap(np, 0);
+	WARN_ON(!ccm_base);
+
+	mx5_clocks_common_init(ccm_base);

 	clk[IMX5_CLK_LP_APM]		= imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
 						lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@ -349,17 +354,12 @@ static void __init mx50_clocks_init(struct device_node *np)
 	clk[IMX5_CLK_CKO2_PODF]		= imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
 	clk[IMX5_CLK_CKO2]		= imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX50 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	mx5_clocks_common_init(0, 0, 0, 0);
-
 	/* set SDHC root clock to 200MHZ*/
 	clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
 	clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@ -370,21 +370,32 @@ static void __init mx50_clocks_init(struct device_node *np)

 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
-	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
 }
 CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);

-int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
-			unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init(struct device_node *np)
 {
-	int i;
+	void __iomem *ccm_base;
+	void __iomem *pll_base;
 	u32 val;
-	struct device_node *np;

-	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
-	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
-	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+	pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+	ccm_base = of_iomap(np, 0);
+	WARN_ON(!ccm_base);
+
+	mx5_clocks_common_init(ccm_base);
+
 	clk[IMX5_CLK_LP_APM]		= imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
 						lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
 	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
@ -417,35 +428,12 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 						mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
 	clk[IMX5_CLK_SPDIF1_GATE]	= imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX51 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

-	np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
-
-	clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
-	clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
-	clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
-	clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx51.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx51.1");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.1");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx51.1");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx51.2");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.2");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx51.2");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx51.3");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.3");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx51.3");
-
 	/* set the usboh3 parent to pll2_sw */
 	clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);

@ -453,9 +441,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
 	clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);

-	/* System timer */
-	mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
-
 	clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
 	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
@ -474,25 +459,35 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	val = readl(MXC_CCM_CLPCR);
 	val |= 1 << 23;
 	writel(val, MXC_CCM_CLPCR);
-
-	return 0;
 }
-
-static void __init mx51_clocks_init_dt(struct device_node *np)
-{
-	mx51_clocks_init(0, 0, 0, 0);
-}
-CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);

 static void __init mx53_clocks_init(struct device_node *np)
 {
-	int i;
+	void __iomem *ccm_base;
+	void __iomem *pll_base;
 	unsigned long r;

-	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
-	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
-	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
-	clk[IMX5_CLK_PLL4_SW]		= imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+	pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL1_SW]		= imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL2_SW]		= imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL3_SW]		= imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+	pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
+	WARN_ON(!pll_base);
+	clk[IMX5_CLK_PLL4_SW]		= imx_clk_pllv2("pll4_sw", "osc", pll_base);
+
+	ccm_base = of_iomap(np, 0);
+	WARN_ON(!ccm_base);
+
+	mx5_clocks_common_init(ccm_base);

 	clk[IMX5_CLK_LP_APM]		= imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
 						lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@ -543,33 +538,12 @@ static void __init mx53_clocks_init(struct device_node *np)
 	clk[IMX5_CLK_SPDIF_XTAL_SEL]	= imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
 						mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX53 clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	mx5_clocks_common_init(0, 0, 0, 0);
-
-	clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
-	clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
-	clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx53.0");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx53.0");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx53.1");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.1");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx53.1");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx53.2");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.2");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx53.2");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx53.3");
-	clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.3");
-	clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx53.3");
-
 	/* set SDHC root clock to 200MHZ*/
 	clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
 	clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@ -583,7 +557,5 @@ static void __init mx53_clocks_init(struct device_node *np)

 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
-	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
 }
 CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>

 #include "clk.h"
 #include "common.h"
@ -70,51 +71,16 @@ static const char *cko_sels[] = { "cko1", "cko2", };
 static const char *lvds_sels[] = {
 	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
-	"pcie_ref", "sata_ref",
+	"pcie_ref_125m", "sata_ref_100m",
 };

-enum mx6q_clks {
-	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
-	pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
-	pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
-	periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
-	esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
-	gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
-	ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
-	ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
-	ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
-	usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
-	emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
-	periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
-	asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
-	gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
-	ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
-	ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
-	ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
-	usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
-	emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
-	mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
-	can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
-	esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
-	hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
-	ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
-	mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
-	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
-	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
-	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
-	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
-	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
-	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
-	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX6QDL_CLK_END];
 static struct clk_onecell_data clk_data;

-static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, rom, arm,
+static unsigned int const clks_init_on[] __initconst = {
+	IMX6QDL_CLK_MMDC_CH0_AXI,
+	IMX6QDL_CLK_ROM,
+	IMX6QDL_CLK_ARM,
 };

 static struct clk_div_table clk_enet_ref_table[] = {
@ -149,10 +115,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	int i;
 	int ret;

-	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
-	clk[ckih] = imx_obtain_fixed_clock("ckih1", 0);
-	clk[osc] = imx_obtain_fixed_clock("osc", 0);
+	clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);

 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
@ -166,14 +132,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		video_div_table[2].div = 1;
 	};

-	/*                   type                               name         parent_name  base     div_mask */
-	clk[pll1_sys]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
-	clk[pll2_bus]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
-	clk[pll3_usb_otg]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
-	clk[pll4_audio]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
-	clk[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
-	clk[pll6_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
-	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
+	/*                                             type             name         parent_name  base     div_mask */
+	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
+	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
+	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
+	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
+	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
+	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
+	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);

 	/*
 	 * Bit 20 is the reserved and read-only bit, we do this only for:
@ -181,28 +147,28 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
 	 * the clk framework may need to enable/disable usbphy's parent
 	 */
-	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
-	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+	clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+	clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);

 	/*
 	 * usbphy*_gate needs to be on after system boots up, and software
 	 * never needs to control it anymore.
 	 */
-	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
-	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+	clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);

-	clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
-	clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+	clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+	clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);

-	clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
-	clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+	clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+	clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);

-	clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+	clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
 			&imx_ccm_lock);

-	clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-	clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));

 	/*
 	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
@ -210,29 +176,29 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * the "output_enable" bit as a gate, even though it's really just
 	 * enabling clock output.
 	 */
-	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
-	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);

-	/*                                name              parent_name        reg       idx */
-	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
-	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
-	clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",     base + 0x100, 2);
-	clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
-	clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
-	clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,  2);
-	clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,  3);
+	/*                                            name              parent_name        reg       idx */
+	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
+	clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
+	clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",     base + 0x100, 2);
+	clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
+	clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
+	clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,  2);
+	clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,  3);

-	/*                                    name         parent_name     mult div */
-	clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
-	clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1, 4);
-	clk[pll3_80m]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
-	clk[pll3_60m]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
-	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+	/*                                                name         parent_name     mult div */
+	clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+	clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1, 4);
+	clk[IMX6QDL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
+	clk[IMX6QDL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
+	clk[IMX6QDL_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);

-	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
-	clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
-	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
-	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+	clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+	clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);

 	np = ccm_node;
 	base = of_iomap(np, 0);
@ -240,262 +206,254 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)

 	imx6q_pm_set_ccm_base(base);

-	/*                                  name                reg       shift width parent_names     num_parents */
-	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
-	clk[pll1_sw]          = imx_clk_mux("pll1_sw",	        base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
-	clk[periph_pre]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
-	clk[periph2_pre]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
-	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
-	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
-	clk[axi_sel]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
-	clk[esai_sel]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[asrc_sel]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[spdif_sel]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[gpu2d_axi]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
-	clk[gpu3d_axi]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
-	clk[gpu2d_core_sel]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
-	clk[gpu3d_core_sel]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
-	clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
-	clk[ipu1_sel]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
-	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
-	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
-	clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
-	clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di0_sel]     = imx_clk_mux_flags("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
-	clk[ipu1_di1_sel]     = imx_clk_mux_flags("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
-	clk[ipu2_di0_sel]     = imx_clk_mux_flags("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
-	clk[ipu2_di1_sel]     = imx_clk_mux_flags("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
-	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
-	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
-	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
-	clk[ssi2_sel]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
-	clk[ssi3_sel]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
-	clk[usdhc1_sel]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
-	clk[usdhc2_sel]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
-	clk[usdhc3_sel]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
-	clk[usdhc4_sel]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
-	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
-	clk[emi_sel]          = imx_clk_fixup_mux("emi_sel",      base + 0x1c, 27, 2, emi_sels,        ARRAY_SIZE(emi_sels),          imx_cscmr1_fixup);
-	clk[emi_slow_sel]     = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels,   ARRAY_SIZE(emi_slow_sels),     imx_cscmr1_fixup);
-	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
-	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
-	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
-	clk[cko2_sel]         = imx_clk_mux("cko2_sel",         base + 0x60, 16, 5, cko2_sels,         ARRAY_SIZE(cko2_sels));
-	clk[cko]              = imx_clk_mux("cko",              base + 0x60, 8, 1,  cko_sels,          ARRAY_SIZE(cko_sels));
+	/*                                              name                reg       shift width parent_names     num_parents */
+	clk[IMX6QDL_CLK_STEP]             = imx_clk_mux("step",	            base + 0xc,  8,  1, step_sels,	   ARRAY_SIZE(step_sels));
+	clk[IMX6QDL_CLK_PLL1_SW]          = imx_clk_mux("pll1_sw",	    base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
+	clk[IMX6QDL_CLK_PERIPH_PRE]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[IMX6QDL_CLK_PERIPH2_PRE]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[IMX6QDL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+	clk[IMX6QDL_CLK_AXI_SEL]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
+	clk[IMX6QDL_CLK_ESAI_SEL]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[IMX6QDL_CLK_ASRC_SEL]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[IMX6QDL_CLK_SPDIF_SEL]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[IMX6QDL_CLK_GPU2D_CORE_SEL]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
+	clk[IMX6QDL_CLK_GPU3D_CORE_SEL]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
+	clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+	clk[IMX6QDL_CLK_IPU1_SEL]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[IMX6QDL_CLK_IPU2_SEL]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[IMX6QDL_CLK_LDB_DI0_SEL]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_LDB_DI1_SEL]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU1_DI0_SEL]     = imx_clk_mux_flags("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU1_DI1_SEL]     = imx_clk_mux_flags("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU2_DI0_SEL]     = imx_clk_mux_flags("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_IPU2_DI1_SEL]     = imx_clk_mux_flags("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+	clk[IMX6QDL_CLK_HSI_TX_SEL]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
+	clk[IMX6QDL_CLK_PCIE_AXI_SEL]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
+	clk[IMX6QDL_CLK_SSI1_SEL]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_SSI2_SEL]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_SSI3_SEL]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_USDHC1_SEL]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_USDHC2_SEL]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_USDHC3_SEL]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_USDHC4_SEL]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_ENFC_SEL]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
+	clk[IMX6QDL_CLK_EMI_SEL]          = imx_clk_fixup_mux("emi_sel",      base + 0x1c, 27, 2, emi_sels,        ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_EMI_SLOW_SEL]     = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels,   ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_VDO_AXI_SEL]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
+	clk[IMX6QDL_CLK_VPU_AXI_SEL]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
+	clk[IMX6QDL_CLK_CKO1_SEL]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+	clk[IMX6QDL_CLK_CKO2_SEL]         = imx_clk_mux("cko2_sel",         base + 0x60, 16, 5, cko2_sels,         ARRAY_SIZE(cko2_sels));
+	clk[IMX6QDL_CLK_CKO]              = imx_clk_mux("cko",              base + 0x60, 8, 1,  cko_sels,          ARRAY_SIZE(cko_sels));

-	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
-	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
-	clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26,  1,   base + 0x48, 3,  periph2_sels, ARRAY_SIZE(periph2_sels));
+	/*                                          name         reg      shift width busy: reg, shift parent_names  num_parents */
+	clk[IMX6QDL_CLK_PERIPH]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
+	clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26,  1,   base + 0x48, 3,  periph2_sels, ARRAY_SIZE(periph2_sels));

-	/*                                      name                parent_name          reg       shift width */
-	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
-	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
-	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
-	clk[ipg_per]          = imx_clk_fixup_divider("ipg_per",    "ipg",               base + 0x1c, 0,  6, imx_cscmr1_fixup);
-	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
-	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
-	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
-	clk[asrc_podf]        = imx_clk_divider("asrc_podf",        "asrc_pred",         base + 0x30, 9,  3);
-	clk[spdif_pred]       = imx_clk_divider("spdif_pred",       "spdif_sel",         base + 0x30, 25, 3);
-	clk[spdif_podf]       = imx_clk_divider("spdif_podf",       "spdif_pred",        base + 0x30, 22, 3);
-	clk[can_root]         = imx_clk_divider("can_root",         "pll3_60m",          base + 0x20, 2,  6);
-	clk[ecspi_root]       = imx_clk_divider("ecspi_root",       "pll3_60m",          base + 0x38, 19, 6);
-	clk[gpu2d_core_podf]  = imx_clk_divider("gpu2d_core_podf",  "gpu2d_core_sel",    base + 0x18, 23, 3);
-	clk[gpu3d_core_podf]  = imx_clk_divider("gpu3d_core_podf",  "gpu3d_core_sel",    base + 0x18, 26, 3);
-	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
-	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
-	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-	clk[ldb_di0_podf]     = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
-	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
-	clk[ldb_di1_podf]     = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
-	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
-	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
-	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
-	clk[ipu2_di1_pre]     = imx_clk_divider("ipu2_di1_pre",     "ipu2_di1_pre_sel",  base + 0x38, 12, 3);
-	clk[hsi_tx_podf]      = imx_clk_divider("hsi_tx_podf",      "hsi_tx_sel",        base + 0x30, 29, 3);
-	clk[ssi1_pred]        = imx_clk_divider("ssi1_pred",        "ssi1_sel",          base + 0x28, 6,  3);
-	clk[ssi1_podf]        = imx_clk_divider("ssi1_podf",        "ssi1_pred",         base + 0x28, 0,  6);
-	clk[ssi2_pred]        = imx_clk_divider("ssi2_pred",        "ssi2_sel",          base + 0x2c, 6,  3);
-	clk[ssi2_podf]        = imx_clk_divider("ssi2_podf",        "ssi2_pred",         base + 0x2c, 0,  6);
-	clk[ssi3_pred]        = imx_clk_divider("ssi3_pred",        "ssi3_sel",          base + 0x28, 22, 3);
-	clk[ssi3_podf]        = imx_clk_divider("ssi3_podf",        "ssi3_pred",         base + 0x28, 16, 6);
-	clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m",          base + 0x24, 0,  6);
-	clk[usdhc1_podf]      = imx_clk_divider("usdhc1_podf",      "usdhc1_sel",        base + 0x24, 11, 3);
-	clk[usdhc2_podf]      = imx_clk_divider("usdhc2_podf",      "usdhc2_sel",        base + 0x24, 16, 3);
-	clk[usdhc3_podf]      = imx_clk_divider("usdhc3_podf",      "usdhc3_sel",        base + 0x24, 19, 3);
-	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
-	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
-	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
-	clk[emi_podf]         = imx_clk_fixup_divider("emi_podf",   "emi_sel",           base + 0x1c, 20, 3, imx_cscmr1_fixup);
-	clk[emi_slow_podf]    = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel",   base + 0x1c, 23, 3, imx_cscmr1_fixup);
-	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
-	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
-	clk[cko2_podf]        = imx_clk_divider("cko2_podf",        "cko2_sel",          base + 0x60, 21, 3);
+	/*                                                  name                parent_name          reg       shift width */
+	clk[IMX6QDL_CLK_PERIPH_CLK2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
+	clk[IMX6QDL_CLK_PERIPH2_CLK2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
+	clk[IMX6QDL_CLK_IPG]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
+	clk[IMX6QDL_CLK_IPG_PER]          = imx_clk_fixup_divider("ipg_per",    "ipg",               base + 0x1c, 0,  6, imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_ESAI_PRED]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
+	clk[IMX6QDL_CLK_ESAI_PODF]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
+	clk[IMX6QDL_CLK_ASRC_PRED]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
+	clk[IMX6QDL_CLK_ASRC_PODF]        = imx_clk_divider("asrc_podf",        "asrc_pred",         base + 0x30, 9,  3);
+	clk[IMX6QDL_CLK_SPDIF_PRED]       = imx_clk_divider("spdif_pred",       "spdif_sel",         base + 0x30, 25, 3);
+	clk[IMX6QDL_CLK_SPDIF_PODF]       = imx_clk_divider("spdif_podf",       "spdif_pred",        base + 0x30, 22, 3);
+	clk[IMX6QDL_CLK_CAN_ROOT]         = imx_clk_divider("can_root",         "pll3_60m",          base + 0x20, 2,  6);
+	clk[IMX6QDL_CLK_ECSPI_ROOT]       = imx_clk_divider("ecspi_root",       "pll3_60m",          base + 0x38, 19, 6);
+	clk[IMX6QDL_CLK_GPU2D_CORE_PODF]  = imx_clk_divider("gpu2d_core_podf",  "gpu2d_core_sel",    base + 0x18, 23, 3);
+	clk[IMX6QDL_CLK_GPU3D_CORE_PODF]  = imx_clk_divider("gpu3d_core_podf",  "gpu3d_core_sel",    base + 0x18, 26, 3);
+	clk[IMX6QDL_CLK_GPU3D_SHADER]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
+	clk[IMX6QDL_CLK_IPU1_PODF]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
+	clk[IMX6QDL_CLK_IPU2_PODF]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
+	clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[IMX6QDL_CLK_LDB_DI0_PODF]     = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+	clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[IMX6QDL_CLK_LDB_DI1_PODF]     = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+	clk[IMX6QDL_CLK_IPU1_DI0_PRE]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
+	clk[IMX6QDL_CLK_IPU1_DI1_PRE]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
+	clk[IMX6QDL_CLK_IPU2_DI0_PRE]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
+	clk[IMX6QDL_CLK_IPU2_DI1_PRE]     = imx_clk_divider("ipu2_di1_pre",     "ipu2_di1_pre_sel",  base + 0x38, 12, 3);
+	clk[IMX6QDL_CLK_HSI_TX_PODF]      = imx_clk_divider("hsi_tx_podf",      "hsi_tx_sel",        base + 0x30, 29, 3);
+	clk[IMX6QDL_CLK_SSI1_PRED]        = imx_clk_divider("ssi1_pred",        "ssi1_sel",          base + 0x28, 6,  3);
+	clk[IMX6QDL_CLK_SSI1_PODF]        = imx_clk_divider("ssi1_podf",        "ssi1_pred",         base + 0x28, 0,  6);
+	clk[IMX6QDL_CLK_SSI2_PRED]        = imx_clk_divider("ssi2_pred",        "ssi2_sel",          base + 0x2c, 6,  3);
+	clk[IMX6QDL_CLK_SSI2_PODF]        = imx_clk_divider("ssi2_podf",        "ssi2_pred",         base + 0x2c, 0,  6);
+	clk[IMX6QDL_CLK_SSI3_PRED]        = imx_clk_divider("ssi3_pred",        "ssi3_sel",          base + 0x28, 22, 3);
+	clk[IMX6QDL_CLK_SSI3_PODF]        = imx_clk_divider("ssi3_podf",        "ssi3_pred",         base + 0x28, 16, 6);
+	clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m",          base + 0x24, 0,  6);
+	clk[IMX6QDL_CLK_USDHC1_PODF]      = imx_clk_divider("usdhc1_podf",      "usdhc1_sel",        base + 0x24, 11, 3);
+	clk[IMX6QDL_CLK_USDHC2_PODF]      = imx_clk_divider("usdhc2_podf",      "usdhc2_sel",        base + 0x24, 16, 3);
+	clk[IMX6QDL_CLK_USDHC3_PODF]      = imx_clk_divider("usdhc3_podf",      "usdhc3_sel",        base + 0x24, 19, 3);
+	clk[IMX6QDL_CLK_USDHC4_PODF]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
+	clk[IMX6QDL_CLK_ENFC_PRED]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
+	clk[IMX6QDL_CLK_ENFC_PODF]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
+	clk[IMX6QDL_CLK_EMI_PODF]         = imx_clk_fixup_divider("emi_podf",   "emi_sel",           base + 0x1c, 20, 3, imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_EMI_SLOW_PODF]    = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel",   base + 0x1c, 23, 3, imx_cscmr1_fixup);
+	clk[IMX6QDL_CLK_VPU_AXI_PODF]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
+	clk[IMX6QDL_CLK_CKO1_PODF]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+	clk[IMX6QDL_CLK_CKO2_PODF]        = imx_clk_divider("cko2_podf",        "cko2_sel",          base + 0x60, 21, 3);

-	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
-	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
-	clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph",      base + 0x14, 19,  3,   base + 0x48, 4);
-	clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2",     base + 0x14, 3,   3,   base + 0x48, 2);
-	clk[arm]               = imx_clk_busy_divider("arm",               "pll1_sw",     base + 0x10, 0,   3,   base + 0x48, 16);
-	clk[ahb]               = imx_clk_busy_divider("ahb",               "periph",      base + 0x14, 10,  3,   base + 0x48, 1);
+	/*                                                        name                 parent_name    reg        shift width busy: reg, shift */
+	clk[IMX6QDL_CLK_AXI]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
+	clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph",      base + 0x14, 19,  3,   base + 0x48, 4);
+	clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2",     base + 0x14, 3,   3,   base + 0x48, 2);
+	clk[IMX6QDL_CLK_ARM]               = imx_clk_busy_divider("arm",               "pll1_sw",     base + 0x10, 0,   3,   base + 0x48, 16);
+	clk[IMX6QDL_CLK_AHB]               = imx_clk_busy_divider("ahb",               "periph",      base + 0x14, 10,  3,   base + 0x48, 1);

-	/*                                name             parent_name          reg         shift */
-	clk[apbh_dma]     = imx_clk_gate2("apbh_dma",      "usdhc3",            base + 0x68, 4);
-	clk[asrc]         = imx_clk_gate2("asrc",          "asrc_podf",         base + 0x68, 6);
-	clk[can1_ipg]     = imx_clk_gate2("can1_ipg",      "ipg",               base + 0x68, 14);
-	clk[can1_serial]  = imx_clk_gate2("can1_serial",   "can_root",          base + 0x68, 16);
-	clk[can2_ipg]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
-	clk[can2_serial]  = imx_clk_gate2("can2_serial",   "can_root",          base + 0x68, 20);
-	clk[ecspi1]       = imx_clk_gate2("ecspi1",        "ecspi_root",        base + 0x6c, 0);
-	clk[ecspi2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
-	clk[ecspi3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
-	clk[ecspi4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
+	/*                                            name             parent_name          reg         shift */
+	clk[IMX6QDL_CLK_APBH_DMA]     = imx_clk_gate2("apbh_dma",      "usdhc3",            base + 0x68, 4);
+	clk[IMX6QDL_CLK_ASRC]         = imx_clk_gate2("asrc",          "asrc_podf",         base + 0x68, 6);
+	clk[IMX6QDL_CLK_CAN1_IPG]     = imx_clk_gate2("can1_ipg",      "ipg",               base + 0x68, 14);
+	clk[IMX6QDL_CLK_CAN1_SERIAL]  = imx_clk_gate2("can1_serial",   "can_root",          base + 0x68, 16);
+	clk[IMX6QDL_CLK_CAN2_IPG]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
+	clk[IMX6QDL_CLK_CAN2_SERIAL]  = imx_clk_gate2("can2_serial",   "can_root",          base + 0x68, 20);
+	clk[IMX6QDL_CLK_ECSPI1]       = imx_clk_gate2("ecspi1",        "ecspi_root",        base + 0x6c, 0);
+	clk[IMX6QDL_CLK_ECSPI2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
+	clk[IMX6QDL_CLK_ECSPI3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
+	clk[IMX6QDL_CLK_ECSPI4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
 	if (cpu_is_imx6dl())
-		/* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
-		clk[ecspi5] = imx_clk_gate2("i2c4",        "ipg_per",           base + 0x6c, 8);
+		clk[IMX6DL_CLK_I2C4]  = imx_clk_gate2("i2c4",          "ipg_per",           base + 0x6c, 8);
 	else
-		clk[ecspi5] = imx_clk_gate2("ecspi5",      "ecspi_root",        base + 0x6c, 8);
-	clk[enet]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
-	clk[esai]         = imx_clk_gate2_shared("esai",   "esai_podf",         base + 0x6c, 16, &share_count_esai);
-	clk[esai_ahb]     = imx_clk_gate2_shared("esai_ahb", "ahb",             base + 0x6c, 16, &share_count_esai);
-	clk[gpt_ipg]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
-	clk[gpt_ipg_per]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
+		clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
+	clk[IMX6QDL_CLK_ENET]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
+	clk[IMX6QDL_CLK_ESAI]         = imx_clk_gate2_shared("esai",   "esai_podf",         base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_AHB]     = imx_clk_gate2_shared("esai_ahb", "ahb",             base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_GPT_IPG]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
+	clk[IMX6QDL_CLK_GPT_IPG_PER]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
 	if (cpu_is_imx6dl())
 		/*
 		 * The multiplexer and divider of imx6q clock gpu3d_shader get
 		 * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
 		 */
-		clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+		clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
 	else
-		clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
-	clk[gpu3d_core]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
-	clk[hdmi_iahb]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
-	clk[hdmi_isfr]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
-	clk[i2c1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
-	clk[i2c2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
-	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
-	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
-	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
-	clk[vdoa]         = imx_clk_gate2("vdoa",          "vdo_axi",           base + 0x70, 26);
-	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
-	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
-	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
-	clk[ipu2]         = imx_clk_gate2("ipu2",          "ipu2_podf",         base + 0x74, 6);
-	clk[ipu2_di0]     = imx_clk_gate2("ipu2_di0",      "ipu2_di0_sel",      base + 0x74, 8);
-	clk[ldb_di0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_podf",      base + 0x74, 12);
-	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
-	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
-	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
+		clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+	clk[IMX6QDL_CLK_GPU3D_CORE]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
+	clk[IMX6QDL_CLK_HDMI_IAHB]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
+	clk[IMX6QDL_CLK_HDMI_ISFR]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
+	clk[IMX6QDL_CLK_I2C1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
+	clk[IMX6QDL_CLK_I2C2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
+	clk[IMX6QDL_CLK_I2C3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
+	clk[IMX6QDL_CLK_IIM]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
+	clk[IMX6QDL_CLK_ENFC]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[IMX6QDL_CLK_VDOA]         = imx_clk_gate2("vdoa",          "vdo_axi",           base + 0x70, 26);
+	clk[IMX6QDL_CLK_IPU1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
+	clk[IMX6QDL_CLK_IPU1_DI0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
+	clk[IMX6QDL_CLK_IPU1_DI1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
+	clk[IMX6QDL_CLK_IPU2]         = imx_clk_gate2("ipu2",          "ipu2_podf",         base + 0x74, 6);
+	clk[IMX6QDL_CLK_IPU2_DI0]     = imx_clk_gate2("ipu2_di0",      "ipu2_di0_sel",      base + 0x74, 8);
+	clk[IMX6QDL_CLK_LDB_DI0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_podf",      base + 0x74, 12);
+	clk[IMX6QDL_CLK_LDB_DI1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
+	clk[IMX6QDL_CLK_IPU2_DI1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
+	clk[IMX6QDL_CLK_HSI_TX]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
 	if (cpu_is_imx6dl())
 		/*
 		 * The multiplexer and divider of the imx6q clock gpu2d get
 		 * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
 		 */
-		clk[mlb] = imx_clk_gate2("mlb",            "gpu2d_core_podf",   base + 0x74, 18);
+		clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb",            "gpu2d_core_podf",   base + 0x74, 18);
 	else
-		clk[mlb] = imx_clk_gate2("mlb",            "axi",               base + 0x74, 18);
-	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
-	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
-	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
-	clk[openvg_axi]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
-	clk[pcie_axi]     = imx_clk_gate2("pcie_axi",      "pcie_axi_sel",      base + 0x78, 0);
-	clk[per1_bch]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
-	clk[pwm1]         = imx_clk_gate2("pwm1",          "ipg_per",           base + 0x78, 16);
-	clk[pwm2]         = imx_clk_gate2("pwm2",          "ipg_per",           base + 0x78, 18);
-	clk[pwm3]         = imx_clk_gate2("pwm3",          "ipg_per",           base + 0x78, 20);
-	clk[pwm4]         = imx_clk_gate2("pwm4",          "ipg_per",           base + 0x78, 22);
-	clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb",  "usdhc3",            base + 0x78, 24);
-	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
-	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
-	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
-	clk[rom]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
-	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
-	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
-	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
-	clk[spdif]        = imx_clk_gate2("spdif",         "spdif_podf",    	base + 0x7c, 14);
-	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
-	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
-	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
-	clk[uart_ipg]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
-	clk[uart_serial]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
-	clk[usboh3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
-	clk[usdhc1]       = imx_clk_gate2("usdhc1",        "usdhc1_podf",       base + 0x80, 2);
-	clk[usdhc2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
-	clk[usdhc3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
-	clk[usdhc4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
-	clk[eim_slow]     = imx_clk_gate2("eim_slow",      "emi_slow_podf",     base + 0x80, 10);
-	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
-	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
-	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
-	clk[cko2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
+		clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb",            "axi",               base + 0x74, 18);
+	clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
+	clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
+	clk[IMX6QDL_CLK_OCRAM]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
+	clk[IMX6QDL_CLK_OPENVG_AXI]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
+	clk[IMX6QDL_CLK_PCIE_AXI]     = imx_clk_gate2("pcie_axi",      "pcie_axi_sel",      base + 0x78, 0);
+	clk[IMX6QDL_CLK_PER1_BCH]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
+	clk[IMX6QDL_CLK_PWM1]         = imx_clk_gate2("pwm1",          "ipg_per",           base + 0x78, 16);
+	clk[IMX6QDL_CLK_PWM2]         = imx_clk_gate2("pwm2",          "ipg_per",           base + 0x78, 18);
+	clk[IMX6QDL_CLK_PWM3]         = imx_clk_gate2("pwm3",          "ipg_per",           base + 0x78, 20);
+	clk[IMX6QDL_CLK_PWM4]         = imx_clk_gate2("pwm4",          "ipg_per",           base + 0x78, 22);
+	clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb",  "usdhc3",            base + 0x78, 24);
+	clk[IMX6QDL_CLK_GPMI_BCH]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
+	clk[IMX6QDL_CLK_GPMI_IO]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
+	clk[IMX6QDL_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+	clk[IMX6QDL_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
+	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
+	clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
+	clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2("spdif",         "spdif_podf",        base + 0x7c, 14);
+	clk[IMX6QDL_CLK_SSI1_IPG]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clk[IMX6QDL_CLK_SSI2_IPG]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clk[IMX6QDL_CLK_SSI3_IPG]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
+	clk[IMX6QDL_CLK_UART_IPG]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
+	clk[IMX6QDL_CLK_UART_SERIAL]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
+	clk[IMX6QDL_CLK_USBOH3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
+	clk[IMX6QDL_CLK_USDHC1]       = imx_clk_gate2("usdhc1",        "usdhc1_podf",       base + 0x80, 2);
+	clk[IMX6QDL_CLK_USDHC2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
+	clk[IMX6QDL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
+	clk[IMX6QDL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
+	clk[IMX6QDL_CLK_EIM_SLOW]     = imx_clk_gate2("eim_slow",      "emi_slow_podf",     base + 0x80, 10);
+	clk[IMX6QDL_CLK_VDO_AXI]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
+	clk[IMX6QDL_CLK_VPU_AXI]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
+	clk[IMX6QDL_CLK_CKO1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+	clk[IMX6QDL_CLK_CKO2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);

-	for (i = 0; i < ARRAY_SIZE(clk); i++)
-		if (IS_ERR(clk[i]))
-			pr_err("i.MX6q clk %d: register failed with %ld\n",
-				i, PTR_ERR(clk[i]));
+	imx_check_clocks(clk, ARRAY_SIZE(clk));

 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);

 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
-		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
-		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+		clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+		clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
 	}

-	clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
-	clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
-	clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
-	clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
-	clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
-	clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
-	clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
-	clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
+	clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);

 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.
 	 * So choose pll2_pfd2_396m as enfc_sel's parent.
 	 */
-	clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+	clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);

 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);

 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
-		clk_prepare_enable(clk[usbphy1_gate]);
-		clk_prepare_enable(clk[usbphy2_gate]);
+		clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
+		clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
 	}

 	/*
 	 * Let's initially set up CLKO with OSC24M, since this configuration
 	 * is widely used by imx6q board designs to clock audio codec.
 	 */
-	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
 	if (!ret)
-		ret = clk_set_parent(clk[cko], clk[cko2]);
+		ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
 	if (ret)
 		pr_warn("failed to set up CLKO: %d\n", ret);

 	/* Audio-related clocks configuration */
-	clk_set_parent(clk[spdif_sel], clk[pll3_pfd3_454m]);
+	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);

 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
-		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+		clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);

 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
-
-	mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
 }
 CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@ -348,18 +348,12 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",       "usdhc3_podf",       base + 0x80, 6);
 	clks[IMX6SL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",       "usdhc4_podf",       base + 0x80, 8);

-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX6SL clk %d: register failed with %ld\n",
-				i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));

 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
 	/* Ensure the AHB clk is at 132MHz. */
 	ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
 	if (ret)
@ -383,8 +377,5 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)

 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
-	mxc_timer_init_dt(np);
 }
 CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@ -124,6 +124,9 @@ static struct clk_div_table video_div_table[] = {
 static u32 share_count_asrc;
 static u32 share_count_audio;
 static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;

 static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 {
@ -409,12 +412,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
 	clks[IMX6SX_CLK_SPDIF]        = imx_clk_gate2_shared("spdif",  "spdif_podf",        base + 0x7c, 14, &share_count_audio);
-	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
-	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
-	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
-	clks[IMX6SX_CLK_SSI1]         = imx_clk_gate2("ssi1",          "ssi1_podf",         base + 0x7c, 18);
-	clks[IMX6SX_CLK_SSI2]         = imx_clk_gate2("ssi2",          "ssi2_podf",         base + 0x7c, 20);
-	clks[IMX6SX_CLK_SSI3]         = imx_clk_gate2("ssi3",          "ssi3_podf",         base + 0x7c, 22);
+	clks[IMX6SX_CLK_SSI1_IPG]     = imx_clk_gate2_shared("ssi1_ipg",      "ipg",        base + 0x7c, 18, &share_count_ssi1);
+	clks[IMX6SX_CLK_SSI2_IPG]     = imx_clk_gate2_shared("ssi2_ipg",      "ipg",        base + 0x7c, 20, &share_count_ssi2);
+	clks[IMX6SX_CLK_SSI3_IPG]     = imx_clk_gate2_shared("ssi3_ipg",      "ipg",        base + 0x7c, 22, &share_count_ssi3);
+	clks[IMX6SX_CLK_SSI1]         = imx_clk_gate2_shared("ssi1",          "ssi1_podf",  base + 0x7c, 18, &share_count_ssi1);
+	clks[IMX6SX_CLK_SSI2]         = imx_clk_gate2_shared("ssi2",          "ssi2_podf",  base + 0x7c, 20, &share_count_ssi2);
+	clks[IMX6SX_CLK_SSI3]         = imx_clk_gate2_shared("ssi3",          "ssi3_podf",  base + 0x7c, 22, &share_count_ssi3);
 	clks[IMX6SX_CLK_UART_IPG]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
 	clks[IMX6SX_CLK_UART_SERIAL]  = imx_clk_gate2("uart_serial",   "uart_podf",         base + 0x7c, 26);
 	clks[IMX6SX_CLK_SAI1_IPG]     = imx_clk_gate2("sai1_ipg",      "ipg",               base + 0x7c, 28);
@ -443,17 +446,12 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	/* mask handshake of mmdc */
 	writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);

-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));

 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);

@ -517,8 +515,5 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)

 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
-	mxc_timer_init_dt(np);
 }
 CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
--- a/Show More
+++ b/Show More