From 0d93f8d17e33e8956c69e01e6b3fe465f38fd5f9 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Oct 2016 13:30:57 -0500 Subject: [PATCH] PCI: artpec6: Use generic DesignWare accessors The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in pp->dbi_base, so use those instead of doing it ourselves in the armada8k driver. No functional change intended. Signed-off-by: Bjorn Helgaas Acked-by: Jesper Nilsson --- drivers/pci/host/pcie-artpec6.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/host/pcie-artpec6.c index d9121c3dd470..b3829d0d9a8f 100644 --- a/drivers/pci/host/pcie-artpec6.c +++ b/drivers/pci/host/pcie-artpec6.c @@ -139,7 +139,7 @@ static int artpec6_pcie_establish_link(struct pcie_port *pp) * Enable writing to config regs. This is required as the Synopsys * driver changes the class code. That register needs DBI write enable. */ - writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF); + dw_pcie_writel_rc(pp, MISC_CONTROL_1_OFF, DBI_RO_WR_EN); pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR; pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR; @@ -159,8 +159,8 @@ static int artpec6_pcie_establish_link(struct pcie_port *pp) return 0; dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", - readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), - readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); + dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0), + dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1)); return -ETIMEDOUT; }