mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-04 13:07:00 +07:00
powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board support
T1040D4RDB/T1042D4RDB are Freescale Reference Design Board which can support T1040/T1042 QorIQ Power Architecture™ processor respectively T1040D4RDB/T1042D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Add support for T1040/T1042D4RDB board: -add device tree -Add entry in corenet_generic.c Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
parent
32d3c4ff01
commit
0d748ec5ea
46
arch/powerpc/boot/dts/t1040d4rdb.dts
Normal file
46
arch/powerpc/boot/dts/t1040d4rdb.dts
Normal file
@ -0,0 +1,46 @@
|
||||
/*
|
||||
* T1040D4RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2015 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/t104xsi-pre.dtsi"
|
||||
/include/ "t104xd4rdb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,T1040D4RDB";
|
||||
compatible = "fsl,T1040D4RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
/include/ "fsl/t1040si-post.dtsi"
|
53
arch/powerpc/boot/dts/t1042d4rdb.dts
Normal file
53
arch/powerpc/boot/dts/t1042d4rdb.dts
Normal file
@ -0,0 +1,53 @@
|
||||
/*
|
||||
* T1042D4RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2015 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/t104xsi-pre.dtsi"
|
||||
/include/ "t104xd4rdb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,T1042D4RDB";
|
||||
compatible = "fsl,T1042D4RDB";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
ifc: localbus@ffe124000 {
|
||||
cpld@3,0 {
|
||||
compatible = "fsl,t1040d4rdb-cpld",
|
||||
"fsl,deepsleep-cpld";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/t1040si-post.dtsi"
|
205
arch/powerpc/boot/dts/t104xd4rdb.dtsi
Normal file
205
arch/powerpc/boot/dts/t104xd4rdb.dtsi
Normal file
@ -0,0 +1,205 @@
|
||||
/*
|
||||
* T1040D4RDB/T1042D4RDB Device Tree Source
|
||||
*
|
||||
* Copyright 2015 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/ {
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
bman_fbpr: bman-fbpr {
|
||||
size = <0 0x1000000>;
|
||||
alignment = <0 0x1000000>;
|
||||
};
|
||||
qman_fqd: qman-fqd {
|
||||
size = <0 0x400000>;
|
||||
alignment = <0 0x400000>;
|
||||
};
|
||||
qman_pfdr: qman-pfdr {
|
||||
size = <0 0x2000000>;
|
||||
alignment = <0 0x2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ifc: localbus@ffe124000 {
|
||||
reg = <0xf 0xfe124000 0 0x2000>;
|
||||
ranges = <0 0 0xf 0xe8000000 0x08000000
|
||||
2 0 0xf 0xff800000 0x00010000
|
||||
3 0 0xf 0xffdf0000 0x00008000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x8000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,ifc-nand";
|
||||
reg = <0x2 0x0 0x10000>;
|
||||
};
|
||||
|
||||
cpld@3,0 {
|
||||
compatible = "fsl,t1040d4rdb-cpld";
|
||||
reg = <3 0 0x300>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
dcsr: dcsr@f00000000 {
|
||||
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
|
||||
};
|
||||
|
||||
bportals: bman-portals@ff4000000 {
|
||||
ranges = <0x0 0xf 0xf4000000 0x2000000>;
|
||||
};
|
||||
|
||||
qportals: qman-portals@ff6000000 {
|
||||
ranges = <0x0 0xf 0xf6000000 0x2000000>;
|
||||
};
|
||||
|
||||
soc: soc@ffe000000 {
|
||||
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
||||
reg = <0xf 0xfe000000 0 0x00001000>;
|
||||
|
||||
spi@110000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "micron,n25q512ax3";
|
||||
reg = <0>;
|
||||
/* input clock */
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
i2c@118000 {
|
||||
hwmon@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1337";
|
||||
reg = <0x68>;
|
||||
interrupts = <0x2 0x1 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
mux@77 {
|
||||
/*
|
||||
* Child nodes of mux depend on which i2c
|
||||
* devices are connected via the mini PCI
|
||||
* connector slot1, the mini PCI connector
|
||||
* slot2, the HDMI connector, and the PEX
|
||||
* slot. Systems with such devices attached
|
||||
* should provide a wrapper .dts file that
|
||||
* includes this one, and adds those nodes
|
||||
*/
|
||||
compatible = "nxp,pca9546";
|
||||
reg = <0x77>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci0: pcie@ffe240000 {
|
||||
reg = <0xf 0xfe240000 0 0x10000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000
|
||||
0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x10000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe250000 {
|
||||
reg = <0xf 0xfe250000 0 0x10000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
|
||||
0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x10000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe260000 {
|
||||
reg = <0xf 0xfe260000 0 0x10000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x10000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci3: pcie@ffe270000 {
|
||||
reg = <0xf 0xfe270000 0 0x10000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x10000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
};
|
@ -153,6 +153,8 @@ static const char * const boards[] __initconst = {
|
||||
"fsl,T1023RDB",
|
||||
"fsl,T1024QDS",
|
||||
"fsl,T1024RDB",
|
||||
"fsl,T1040D4RDB",
|
||||
"fsl,T1042D4RDB",
|
||||
"fsl,T1040QDS",
|
||||
"fsl,T1042QDS",
|
||||
"fsl,T1040RDB",
|
||||
|
Loading…
Reference in New Issue
Block a user