mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 00:40:55 +07:00
cxgb3: Add 1G fiber support
Add support for 1G optical Vitesse PHY. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Divy Le Ray
David S. Miller
parent
1e8820256f
commit
0ce2f03bad
@ -691,6 +691,7 @@ int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
|
||||
unsigned int set);
|
||||
int t3_phy_reset(struct cphy *phy, int mmd, int wait);
|
||||
int t3_phy_advertise(struct cphy *phy, unsigned int advert);
|
||||
int t3_phy_advertise_fiber(struct cphy *phy, unsigned int advert);
|
||||
int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex);
|
||||
int t3_phy_lasi_intr_enable(struct cphy *phy);
|
||||
int t3_phy_lasi_intr_disable(struct cphy *phy);
|
||||
|
||||
@ -407,6 +407,29 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
|
||||
return mdio_write(phy, 0, MII_ADVERTISE, val);
|
||||
}
|
||||
|
||||
/**
|
||||
* t3_phy_advertise_fiber - set fiber PHY advertisement register
|
||||
* @phy: the PHY to operate on
|
||||
* @advert: bitmap of capabilities the PHY should advertise
|
||||
*
|
||||
* Sets a fiber PHY's advertisement register to advertise the
|
||||
* requested capabilities.
|
||||
*/
|
||||
int t3_phy_advertise_fiber(struct cphy *phy, unsigned int advert)
|
||||
{
|
||||
unsigned int val = 0;
|
||||
|
||||
if (advert & ADVERTISED_1000baseT_Half)
|
||||
val |= ADVERTISE_1000XHALF;
|
||||
if (advert & ADVERTISED_1000baseT_Full)
|
||||
val |= ADVERTISE_1000XFULL;
|
||||
if (advert & ADVERTISED_Pause)
|
||||
val |= ADVERTISE_1000XPAUSE;
|
||||
if (advert & ADVERTISED_Asym_Pause)
|
||||
val |= ADVERTISE_1000XPSE_ASYM;
|
||||
return mdio_write(phy, 0, MII_ADVERTISE, val);
|
||||
}
|
||||
|
||||
/**
|
||||
* t3_set_phy_speed_duplex - force PHY speed and duplex
|
||||
* @phy: the PHY to operate on
|
||||
|
||||
@ -33,28 +33,40 @@
|
||||
|
||||
/* VSC8211 PHY specific registers. */
|
||||
enum {
|
||||
VSC8211_SIGDET_CTRL = 19,
|
||||
VSC8211_EXT_CTRL = 23,
|
||||
VSC8211_INTR_ENABLE = 25,
|
||||
VSC8211_INTR_STATUS = 26,
|
||||
VSC8211_LED_CTRL = 27,
|
||||
VSC8211_AUX_CTRL_STAT = 28,
|
||||
VSC8211_EXT_PAGE_AXS = 31,
|
||||
};
|
||||
|
||||
enum {
|
||||
VSC_INTR_RX_ERR = 1 << 0,
|
||||
VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
|
||||
VSC_INTR_CABLE = 1 << 2, /* cable impairment */
|
||||
VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
|
||||
VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
|
||||
VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
|
||||
VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
|
||||
VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
|
||||
VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
|
||||
VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
|
||||
VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
|
||||
VSC_INTR_LINK_CHG = 1 << 13, /* link change */
|
||||
VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
|
||||
VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
|
||||
VSC_INTR_CABLE = 1 << 2, /* cable impairment */
|
||||
VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
|
||||
VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
|
||||
VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
|
||||
VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
|
||||
VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
|
||||
VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
|
||||
VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
|
||||
VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
|
||||
VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
|
||||
VSC_INTR_LINK_CHG = 1 << 13, /* link change */
|
||||
VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
|
||||
VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
|
||||
};
|
||||
|
||||
enum {
|
||||
VSC_CTRL_CLAUSE37_VIEW = 1 << 4, /* Switch to Clause 37 view */
|
||||
VSC_CTRL_MEDIA_MODE_HI = 0xf000 /* High part of media mode select */
|
||||
};
|
||||
|
||||
#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
|
||||
VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
|
||||
VSC_INTR_NEG_DONE)
|
||||
#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
|
||||
VSC_INTR_ENABLE)
|
||||
@ -184,6 +196,112 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
|
||||
int *speed, int *duplex, int *fc)
|
||||
{
|
||||
unsigned int bmcr, status, lpa, adv;
|
||||
int err, sp = -1, dplx = -1, pause = 0;
|
||||
|
||||
err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
|
||||
if (!err)
|
||||
err = mdio_read(cphy, 0, MII_BMSR, &status);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (link_ok) {
|
||||
/*
|
||||
* BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
|
||||
* once more to get the current link state.
|
||||
*/
|
||||
if (!(status & BMSR_LSTATUS))
|
||||
err = mdio_read(cphy, 0, MII_BMSR, &status);
|
||||
if (err)
|
||||
return err;
|
||||
*link_ok = (status & BMSR_LSTATUS) != 0;
|
||||
}
|
||||
if (!(bmcr & BMCR_ANENABLE)) {
|
||||
dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
|
||||
if (bmcr & BMCR_SPEED1000)
|
||||
sp = SPEED_1000;
|
||||
else if (bmcr & BMCR_SPEED100)
|
||||
sp = SPEED_100;
|
||||
else
|
||||
sp = SPEED_10;
|
||||
} else if (status & BMSR_ANEGCOMPLETE) {
|
||||
err = mdio_read(cphy, 0, MII_LPA, &lpa);
|
||||
if (!err)
|
||||
err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (adv & lpa & ADVERTISE_1000XFULL) {
|
||||
dplx = DUPLEX_FULL;
|
||||
sp = SPEED_1000;
|
||||
} else if (adv & lpa & ADVERTISE_1000XHALF) {
|
||||
dplx = DUPLEX_HALF;
|
||||
sp = SPEED_1000;
|
||||
}
|
||||
|
||||
if (fc && dplx == DUPLEX_FULL) {
|
||||
if (lpa & adv & ADVERTISE_1000XPAUSE)
|
||||
pause = PAUSE_RX | PAUSE_TX;
|
||||
else if ((lpa & ADVERTISE_1000XPAUSE) &&
|
||||
(adv & lpa & ADVERTISE_1000XPSE_ASYM))
|
||||
pause = PAUSE_TX;
|
||||
else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
|
||||
(adv & ADVERTISE_1000XPAUSE))
|
||||
pause = PAUSE_RX;
|
||||
}
|
||||
}
|
||||
if (speed)
|
||||
*speed = sp;
|
||||
if (duplex)
|
||||
*duplex = dplx;
|
||||
if (fc)
|
||||
*fc = pause;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Enable/disable auto MDI/MDI-X in forced link speed mode.
|
||||
*/
|
||||
static int vsc8211_set_automdi(struct cphy *phy, int enable)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, 18, 0x12);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, 16, 0x87fa);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = t3_set_phy_speed_duplex(phy, speed, duplex);
|
||||
if (!err)
|
||||
err = vsc8211_set_automdi(phy, 1);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int vsc8211_power_down(struct cphy *cphy, int enable)
|
||||
{
|
||||
return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
|
||||
@ -221,12 +339,66 @@ static struct cphy_ops vsc8211_ops = {
|
||||
.power_down = vsc8211_power_down,
|
||||
};
|
||||
|
||||
static struct cphy_ops vsc8211_fiber_ops = {
|
||||
.reset = vsc8211_reset,
|
||||
.intr_enable = vsc8211_intr_enable,
|
||||
.intr_disable = vsc8211_intr_disable,
|
||||
.intr_clear = vsc8211_intr_clear,
|
||||
.intr_handler = vsc8211_intr_handler,
|
||||
.autoneg_enable = vsc8211_autoneg_enable,
|
||||
.autoneg_restart = vsc8211_autoneg_restart,
|
||||
.advertise = t3_phy_advertise_fiber,
|
||||
.set_speed_duplex = t3_set_phy_speed_duplex,
|
||||
.get_link_status = vsc8211_get_link_status_fiber,
|
||||
.power_down = vsc8211_power_down,
|
||||
};
|
||||
|
||||
int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
|
||||
int phy_addr, const struct mdio_ops *mdio_ops)
|
||||
{
|
||||
int err;
|
||||
unsigned int val;
|
||||
|
||||
cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
|
||||
SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
|
||||
SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
|
||||
SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
|
||||
msleep(20); /* PHY needs ~10ms to start responding to MDIO */
|
||||
|
||||
err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
|
||||
if (err)
|
||||
return err;
|
||||
if (val & VSC_CTRL_MEDIA_MODE_HI) {
|
||||
/* copper interface, just need to configure the LEDs */
|
||||
return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
|
||||
}
|
||||
|
||||
phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
|
||||
SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
|
||||
phy->desc = "1000BASE-X";
|
||||
phy->ops = &vsc8211_fiber_ops;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
|
||||
val | VSC_CTRL_CLAUSE37_VIEW);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = vsc8211_reset(phy, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
udelay(5); /* delay after reset before next SMI */
|
||||
return 0;
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user