AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 14:56:43 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

arm64: dts: qcom: sc7180: Add USB related nodes

Browse Source 
Add nodes for DWC3 USB controller, QMP and QUSB PHYs.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573795421-13989-2-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Sandeep Maheswaram 2019-11-15 10:53:41 +05:30 committed by Bjorn Andersson
parent 82bdc93972
commit 0b766e7fe5
2 changed files with 130 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
arch/arm64/boot/dts/qcom/sc7180-idp.dts
View File

@ -262,6 +262,31 @@ &uart8 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "host";
};
&usb_1_hsphy {
status = "okay";
vdd-supply = <&vreg_l4a_0p8>;
vdda-pll-supply = <&vreg_l11a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
qcom,imp-res-offset-value = <8>;
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vreg_l4a_0p8>;
};
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&qspi_clk {

105
arch/arm64/boot/dts/qcom/sc7180.dtsi
View File

@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@ -190,6 +191,18 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
};
qfprom@784000 {
compatible = "qcom,qfprom";
reg = <0 0x00784000 0 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
qusb2p_hstx_trim: hstx-trim-primary@25b {
reg = <0x25b 0x1>;
bits = <1 3>;
};
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@ -946,6 +959,98 @@ tsens1: thermal-sensor@c265000 {
#thermal-sensor-cells = <1>;
};
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sc7180-qusb2-phy";
reg = <0 0x088e3000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2p_hstx_trim>;
};
usb_1_qmpphy: phy@88e9000 {
compatible = "qcom,sc7180-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x38>;
reg-names = "reg-base", "dp_com";
status = "disabled";
#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_1_ssphy: lanes@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x128>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x18>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
};
usb_1: usb@a6f8800 {
compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x540 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,