AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2025-01-16 01:57:18 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

arm64: dts: allwinner: h6: Introduce Beelink GS1 board

Browse Source 
Beelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- FN-Link 6222B-SRB Wifi/BT
- 1x USB 2.0 Host and 1x USB 3.0 Host
- HDMI port
- S/PDIF Tx
- IR receiver
- 5V/2A DC power supply

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This commit is contained in:
Clément Péron 2019-04-08 17:27:52 +02:00 committed by Maxime Ripard
parent 2c98d9e475
commit 089bee8dd1
No known key found for this signature in database
GPG Key ID: E3EF0D6F671851C5
2 changed files with 261 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm64/boot/dts/allwinner/Makefile
View File

@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb

260
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts Normal file
View File

@ -0,0 +1,260 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
*/
/dts-v1/;
#include "sun50i-h6.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Beelink GS1";
compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
power {
label = "beelink:white:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the DC jack */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_aldo2>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&mmc2 {
vmmc-supply = <&reg_cldo1>;
vqmmc-supply = <&reg_bldo2>;
non-removable;
cap-mmc-hw-reset;
bus-width = <8>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&pio {
vcc-pd-supply = <&reg_cldo1>;
vcc-pg-supply = <&reg_aldo1>;
};
&r_i2c {
status = "okay";
axp805: pmic@36 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x36>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
x-powers,self-working-mode;
vina-supply = <&reg_vcc5v>;
vinb-supply = <&reg_vcc5v>;
vinc-supply = <&reg_vcc5v>;
vind-supply = <&reg_vcc5v>;
vine-supply = <&reg_vcc5v>;
aldoin-supply = <&reg_vcc5v>;
bldoin-supply = <&reg_vcc5v>;
cldoin-supply = <&reg_vcc5v>;
regulators {
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ac200";
regulator-enable-ramp-delay = <100000>;
};
reg_aldo3: aldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc25-dram";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-bias-pll";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-efuse-pcie-hdmi-io";
};
reg_bldo3: bldo3 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dcxoio";
};
bldo4 {
/* unused */
};
reg_cldo1: cldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
reg_cldo2: cldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-1";
};
reg_cldo3: cldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-2";
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <960000>;
regulator-max-microvolt = <960000>;
regulator-name = "vdd-sys";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
sw {
/* unused */
};
};
};
};
&r_pio {
/*
* PL0 and PL1 are used for PMIC I2C
* don't enable the pl-supply else
* it will fail at boot
*
* vcc-pl-supply = <&reg_aldo1>;
*/
vcc-pm-supply = <&reg_aldo1>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usb2otg {
dr_mode = "host";
status = "okay";
};
&usb2phy {
usb0_vbus-supply = <&reg_vcc5v>;
status = "okay";
};