diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
new file mode 100644
index 000000000000..2f7870983ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -0,0 +1,65 @@
+ARM Mali-DP
+
+The following bindings apply to a family of Display Processors sold as
+licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+DP650 processors that offer multiple composition layers, support for
+rotation and scaling output.
+
+Required properties:
+  - compatible: should be one of
+	"arm,mali-dp500"
+	"arm,mali-dp550"
+	"arm,mali-dp650"
+    depending on the particular implementation present in the hardware
+  - reg: Physical base address and size of the block of registers used by
+    the processor.
+  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
+    interrupt client nodes.
+  - interrupt-names: name of the engine inside the processor that will
+    use the corresponding interrupt. Should be one of "DE" or "SE".
+  - clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+  - clock-names: A list of clock names. It should contain:
+      - "pclk": for the APB interface clock
+      - "aclk": for the AXI interface clock
+      - "mclk": for the main processor clock
+      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
+  - arm,malidp-output-port-lines: Array of u8 values describing the number
+    of output lines per channel (R, G and B).
+
+Required sub-nodes:
+  - port: The Mali DP connection to an encoder input port. The connection
+    is modelled using the OF graph bindings specified in
+    Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for the framebuffer; if not present, the framebuffer may
+    be located anywhere in memory.
+
+
+Example:
+
+/ {
+	...
+
+	dp0: malidp@6f200000 {
+		compatible = "arm,mali-dp650";
+		reg = <0 0x6f200000 0 0x20000>;
+		memory-region = <&display_reserved>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "DE", "SE";
+		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+		clock-names = "pxlclk", "mclk", "aclk", "pclk";
+		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+		port {
+			dp0_output: endpoint {
+				remote-endpoint = <&tda998x_2_input>;
+			};
+		};
+	};
+
+	...
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index cb88f724e07c..5b362eb7e9df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -865,9 +865,17 @@ F:	Documentation/devicetree/bindings/display/snps,arcpgu.txt
 ARM HDLCD DRM DRIVER
 M:	Liviu Dudau <liviu.dudau@arm.com>
 S:	Supported
-F:	drivers/gpu/drm/arm/
+F:	drivers/gpu/drm/arm/hdlcd_*
 F:	Documentation/devicetree/bindings/display/arm,hdlcd.txt
 
+ARM MALI-DP DRM DRIVER
+M:	Liviu Dudau <liviu.dudau@arm.com>
+M:	Brian Starkey <brian.starkey@arm.com>
+M:	Mali DP Maintainers <malidp@foss.arm.com>
+S:	Supported
+F:	drivers/gpu/drm/arm/
+F:	Documentation/devicetree/bindings/display/arm,malidp.txt
+
 ARM MFM AND FLOPPY DRIVERS
 M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
diff --git a/drivers/gpu/drm/arm/Kconfig b/drivers/gpu/drm/arm/Kconfig
index eaed454e043c..1b2906568a48 100644
--- a/drivers/gpu/drm/arm/Kconfig
+++ b/drivers/gpu/drm/arm/Kconfig
@@ -25,3 +25,19 @@ config DRM_HDLCD_SHOW_UNDERRUN
 	  Enable this option to show in red colour the pixels that the
 	  HDLCD device did not fetch from framebuffer due to underrun
 	  conditions.
+
+config DRM_MALI_DISPLAY
+	tristate "ARM Mali Display Processor"
+	depends on DRM && OF && (ARM || ARM64)
+	depends on COMMON_CLK
+	select DRM_ARM
+	select DRM_KMS_HELPER
+	select DRM_KMS_CMA_HELPER
+	select DRM_GEM_CMA_HELPER
+	select VIDEOMODE_HELPERS
+	help
+	  Choose this option if you want to compile the ARM Mali Display
+	  Processor driver. It supports the DP500, DP550 and DP650 variants
+	  of the hardware.
+
+	  If compiled as a module it will be called mali-dp.
diff --git a/drivers/gpu/drm/arm/Makefile b/drivers/gpu/drm/arm/Makefile
index 89dcb7bab93a..bb8b158ff90d 100644
--- a/drivers/gpu/drm/arm/Makefile
+++ b/drivers/gpu/drm/arm/Makefile
@@ -1,2 +1,4 @@
 hdlcd-y := hdlcd_drv.o hdlcd_crtc.o
 obj-$(CONFIG_DRM_HDLCD)	+= hdlcd.o
+mali-dp-y := malidp_drv.o malidp_hw.o malidp_planes.o malidp_crtc.o
+obj-$(CONFIG_DRM_MALI_DISPLAY)	+= mali-dp.o
diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c
new file mode 100644
index 000000000000..08e6a71f5d05
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_crtc.c
@@ -0,0 +1,216 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 driver (crtc operations)
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <linux/clk.h>
+#include <video/videomode.h>
+
+#include "malidp_drv.h"
+#include "malidp_hw.h"
+
+static bool malidp_crtc_mode_fixup(struct drm_crtc *crtc,
+				   const struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	/*
+	 * check that the hardware can drive the required clock rate,
+	 * but skip the check if the clock is meant to be disabled (req_rate = 0)
+	 */
+	long rate, req_rate = mode->crtc_clock * 1000;
+
+	if (req_rate) {
+		rate = clk_round_rate(hwdev->mclk, req_rate);
+		if (rate < req_rate) {
+			DRM_DEBUG_DRIVER("mclk clock unable to reach %d kHz\n",
+					 mode->crtc_clock);
+			return false;
+		}
+
+		rate = clk_round_rate(hwdev->pxlclk, req_rate);
+		if (rate != req_rate) {
+			DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
+					 req_rate);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static void malidp_crtc_enable(struct drm_crtc *crtc)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+	struct videomode vm;
+
+	drm_display_mode_to_videomode(&crtc->state->adjusted_mode, &vm);
+
+	clk_prepare_enable(hwdev->pxlclk);
+
+	/* mclk needs to be set to the same or higher rate than pxlclk */
+	clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+	clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+
+	hwdev->modeset(hwdev, &vm);
+	hwdev->leave_config_mode(hwdev);
+	drm_crtc_vblank_on(crtc);
+}
+
+static void malidp_crtc_disable(struct drm_crtc *crtc)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	drm_crtc_vblank_off(crtc);
+	hwdev->enter_config_mode(hwdev);
+	clk_disable_unprepare(hwdev->pxlclk);
+}
+
+static int malidp_crtc_atomic_check(struct drm_crtc *crtc,
+				    struct drm_crtc_state *state)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+	struct drm_plane *plane;
+	const struct drm_plane_state *pstate;
+	u32 rot_mem_free, rot_mem_usable;
+	int rotated_planes = 0;
+
+	/*
+	 * check if there is enough rotation memory available for planes
+	 * that need 90° and 270° rotation. Each plane has set its required
+	 * memory size in the ->plane_check() callback, here we only make
+	 * sure that the sums are less that the total usable memory.
+	 *
+	 * The rotation memory allocation algorithm (for each plane):
+	 *  a. If no more rotated planes exist, all remaining rotate
+	 *     memory in the bank is available for use by the plane.
+	 *  b. If other rotated planes exist, and plane's layer ID is
+	 *     DE_VIDEO1, it can use all the memory from first bank if
+	 *     secondary rotation memory bank is available, otherwise it can
+	 *     use up to half the bank's memory.
+	 *  c. If other rotated planes exist, and plane's layer ID is not
+	 *     DE_VIDEO1, it can use half of the available memory
+	 *
+	 * Note: this algorithm assumes that the order in which the planes are
+	 * checked always has DE_VIDEO1 plane first in the list if it is
+	 * rotated. Because that is how we create the planes in the first
+	 * place, under current DRM version things work, but if ever the order
+	 * in which drm_atomic_crtc_state_for_each_plane() iterates over planes
+	 * changes, we need to pre-sort the planes before validation.
+	 */
+
+	/* first count the number of rotated planes */
+	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
+		if (pstate->rotation & MALIDP_ROTATED_MASK)
+			rotated_planes++;
+	}
+
+	rot_mem_free = hwdev->rotation_memory[0];
+	/*
+	 * if we have more than 1 plane using rotation memory, use the second
+	 * block of rotation memory as well
+	 */
+	if (rotated_planes > 1)
+		rot_mem_free += hwdev->rotation_memory[1];
+
+	/* now validate the rotation memory requirements */
+	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
+		struct malidp_plane *mp = to_malidp_plane(plane);
+		struct malidp_plane_state *ms = to_malidp_plane_state(pstate);
+
+		if (pstate->rotation & MALIDP_ROTATED_MASK) {
+			/* process current plane */
+			rotated_planes--;
+
+			if (!rotated_planes) {
+				/* no more rotated planes, we can use what's left */
+				rot_mem_usable = rot_mem_free;
+			} else {
+				if ((mp->layer->id != DE_VIDEO1) ||
+				    (hwdev->rotation_memory[1] == 0))
+					rot_mem_usable = rot_mem_free / 2;
+				else
+					rot_mem_usable = hwdev->rotation_memory[0];
+			}
+
+			rot_mem_free -= rot_mem_usable;
+
+			if (ms->rotmem_size > rot_mem_usable)
+				return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static const struct drm_crtc_helper_funcs malidp_crtc_helper_funcs = {
+	.mode_fixup = malidp_crtc_mode_fixup,
+	.enable = malidp_crtc_enable,
+	.disable = malidp_crtc_disable,
+	.atomic_check = malidp_crtc_atomic_check,
+};
+
+static const struct drm_crtc_funcs malidp_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+int malidp_crtc_init(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct drm_plane *primary = NULL, *plane;
+	int ret;
+
+	ret = malidp_de_planes_init(drm);
+	if (ret < 0) {
+		DRM_ERROR("Failed to initialise planes\n");
+		return ret;
+	}
+
+	drm_for_each_plane(plane, drm) {
+		if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+			primary = plane;
+			break;
+		}
+	}
+
+	if (!primary) {
+		DRM_ERROR("no primary plane found\n");
+		ret = -EINVAL;
+		goto crtc_cleanup_planes;
+	}
+
+	ret = drm_crtc_init_with_planes(drm, &malidp->crtc, primary, NULL,
+					&malidp_crtc_funcs, NULL);
+
+	if (!ret) {
+		drm_crtc_helper_add(&malidp->crtc, &malidp_crtc_helper_funcs);
+		return 0;
+	}
+
+crtc_cleanup_planes:
+	malidp_de_planes_destroy(drm);
+
+	return ret;
+}
diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
new file mode 100644
index 000000000000..e5b44e92f8cf
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_drv.c
@@ -0,0 +1,512 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 KMS/DRM driver
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/of_reserved_mem.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+
+#include "malidp_drv.h"
+#include "malidp_regs.h"
+#include "malidp_hw.h"
+
+#define MALIDP_CONF_VALID_TIMEOUT	250
+
+/*
+ * set the "config valid" bit and wait until the hardware acts on it
+ */
+static int malidp_set_and_wait_config_valid(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+	int ret;
+
+	hwdev->set_config_valid(hwdev);
+	/* don't wait for config_valid flag if we are in config mode */
+	if (hwdev->in_config_mode(hwdev))
+		return 0;
+
+	ret = wait_event_interruptible_timeout(malidp->wq,
+			atomic_read(&malidp->config_valid) == 1,
+			msecs_to_jiffies(MALIDP_CONF_VALID_TIMEOUT));
+
+	return (ret > 0) ? 0 : -ETIMEDOUT;
+}
+
+static void malidp_output_poll_changed(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+
+	drm_fbdev_cma_hotplug_event(malidp->fbdev);
+}
+
+static void malidp_atomic_commit_hw_done(struct drm_atomic_state *state)
+{
+	struct drm_pending_vblank_event *event;
+	struct drm_device *drm = state->dev;
+	struct malidp_drm *malidp = drm->dev_private;
+	int ret = malidp_set_and_wait_config_valid(drm);
+
+	if (ret)
+		DRM_DEBUG_DRIVER("timed out waiting for updated configuration\n");
+
+	event = malidp->crtc.state->event;
+	if (event) {
+		malidp->crtc.state->event = NULL;
+
+		spin_lock_irq(&drm->event_lock);
+		if (drm_crtc_vblank_get(&malidp->crtc) == 0)
+			drm_crtc_arm_vblank_event(&malidp->crtc, event);
+		else
+			drm_crtc_send_vblank_event(&malidp->crtc, event);
+		spin_unlock_irq(&drm->event_lock);
+	}
+	drm_atomic_helper_commit_hw_done(state);
+}
+
+static void malidp_atomic_commit_tail(struct drm_atomic_state *state)
+{
+	struct drm_device *drm = state->dev;
+
+	drm_atomic_helper_commit_modeset_disables(drm, state);
+	drm_atomic_helper_commit_modeset_enables(drm, state);
+	drm_atomic_helper_commit_planes(drm, state, true);
+
+	malidp_atomic_commit_hw_done(state);
+
+	drm_atomic_helper_wait_for_vblanks(drm, state);
+
+	drm_atomic_helper_cleanup_planes(drm, state);
+}
+
+static struct drm_mode_config_helper_funcs malidp_mode_config_helpers = {
+	.atomic_commit_tail = malidp_atomic_commit_tail,
+};
+
+static const struct drm_mode_config_funcs malidp_mode_config_funcs = {
+	.fb_create = drm_fb_cma_create,
+	.output_poll_changed = malidp_output_poll_changed,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int malidp_enable_vblank(struct drm_device *drm, unsigned int crtc)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	malidp_hw_enable_irq(hwdev, MALIDP_DE_BLOCK,
+			     hwdev->map.de_irq_map.vsync_irq);
+	return 0;
+}
+
+static void malidp_disable_vblank(struct drm_device *drm, unsigned int pipe)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK,
+			      hwdev->map.de_irq_map.vsync_irq);
+}
+
+static int malidp_init(struct drm_device *drm)
+{
+	int ret;
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	drm_mode_config_init(drm);
+
+	drm->mode_config.min_width = hwdev->min_line_size;
+	drm->mode_config.min_height = hwdev->min_line_size;
+	drm->mode_config.max_width = hwdev->max_line_size;
+	drm->mode_config.max_height = hwdev->max_line_size;
+	drm->mode_config.funcs = &malidp_mode_config_funcs;
+	drm->mode_config.helper_private = &malidp_mode_config_helpers;
+
+	ret = malidp_crtc_init(drm);
+	if (ret) {
+		drm_mode_config_cleanup(drm);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int malidp_irq_init(struct platform_device *pdev)
+{
+	int irq_de, irq_se, ret = 0;
+	struct drm_device *drm = dev_get_drvdata(&pdev->dev);
+
+	/* fetch the interrupts from DT */
+	irq_de = platform_get_irq_byname(pdev, "DE");
+	if (irq_de < 0) {
+		DRM_ERROR("no 'DE' IRQ specified!\n");
+		return irq_de;
+	}
+	irq_se = platform_get_irq_byname(pdev, "SE");
+	if (irq_se < 0) {
+		DRM_ERROR("no 'SE' IRQ specified!\n");
+		return irq_se;
+	}
+
+	ret = malidp_de_irq_init(drm, irq_de);
+	if (ret)
+		return ret;
+
+	ret = malidp_se_irq_init(drm, irq_se);
+	if (ret) {
+		malidp_de_irq_fini(drm);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void malidp_lastclose(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+
+	drm_fbdev_cma_restore_mode(malidp->fbdev);
+}
+
+static const struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
+	.poll = drm_poll,
+	.read = drm_read,
+	.llseek = noop_llseek,
+	.mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver malidp_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC |
+			   DRIVER_PRIME,
+	.lastclose = malidp_lastclose,
+	.get_vblank_counter = drm_vblank_no_hw_counter,
+	.enable_vblank = malidp_enable_vblank,
+	.disable_vblank = malidp_disable_vblank,
+	.gem_free_object_unlocked = drm_gem_cma_free_object,
+	.gem_vm_ops = &drm_gem_cma_vm_ops,
+	.dumb_create = drm_gem_cma_dumb_create,
+	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
+	.dumb_destroy = drm_gem_dumb_destroy,
+	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+	.gem_prime_export = drm_gem_prime_export,
+	.gem_prime_import = drm_gem_prime_import,
+	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap = drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap = drm_gem_cma_prime_mmap,
+	.fops = &fops,
+	.name = "mali-dp",
+	.desc = "ARM Mali Display Processor driver",
+	.date = "20160106",
+	.major = 1,
+	.minor = 0,
+};
+
+static const struct of_device_id  malidp_drm_of_match[] = {
+	{
+		.compatible = "arm,mali-dp500",
+		.data = &malidp_device[MALIDP_500]
+	},
+	{
+		.compatible = "arm,mali-dp550",
+		.data = &malidp_device[MALIDP_550]
+	},
+	{
+		.compatible = "arm,mali-dp650",
+		.data = &malidp_device[MALIDP_650]
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, malidp_drm_of_match);
+
+#define MAX_OUTPUT_CHANNELS	3
+
+static int malidp_bind(struct device *dev)
+{
+	struct resource *res;
+	struct drm_device *drm;
+	struct malidp_drm *malidp;
+	struct malidp_hw_device *hwdev;
+	struct platform_device *pdev = to_platform_device(dev);
+	/* number of lines for the R, G and B output */
+	u8 output_width[MAX_OUTPUT_CHANNELS];
+	int ret = 0, i;
+	u32 version, out_depth = 0;
+
+	malidp = devm_kzalloc(dev, sizeof(*malidp), GFP_KERNEL);
+	if (!malidp)
+		return -ENOMEM;
+
+	hwdev = devm_kzalloc(dev, sizeof(*hwdev), GFP_KERNEL);
+	if (!hwdev)
+		return -ENOMEM;
+
+	/*
+	 * copy the associated data from malidp_drm_of_match to avoid
+	 * having to keep a reference to the OF node after binding
+	 */
+	memcpy(hwdev, of_device_get_match_data(dev), sizeof(*hwdev));
+	malidp->dev = hwdev;
+
+	INIT_LIST_HEAD(&malidp->event_list);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hwdev->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hwdev->regs)) {
+		DRM_ERROR("Failed to map control registers area\n");
+		return PTR_ERR(hwdev->regs);
+	}
+
+	hwdev->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(hwdev->pclk))
+		return PTR_ERR(hwdev->pclk);
+
+	hwdev->aclk = devm_clk_get(dev, "aclk");
+	if (IS_ERR(hwdev->aclk))
+		return PTR_ERR(hwdev->aclk);
+
+	hwdev->mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(hwdev->mclk))
+		return PTR_ERR(hwdev->mclk);
+
+	hwdev->pxlclk = devm_clk_get(dev, "pxlclk");
+	if (IS_ERR(hwdev->pxlclk))
+		return PTR_ERR(hwdev->pxlclk);
+
+	/* Get the optional framebuffer memory resource */
+	ret = of_reserved_mem_device_init(dev);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	drm = drm_dev_alloc(&malidp_driver, dev);
+	if (!drm) {
+		ret = -ENOMEM;
+		goto alloc_fail;
+	}
+
+	/* Enable APB clock in order to get access to the registers */
+	clk_prepare_enable(hwdev->pclk);
+	/*
+	 * Enable AXI clock and main clock so that prefetch can start once
+	 * the registers are set
+	 */
+	clk_prepare_enable(hwdev->aclk);
+	clk_prepare_enable(hwdev->mclk);
+
+	ret = hwdev->query_hw(hwdev);
+	if (ret) {
+		DRM_ERROR("Invalid HW configuration\n");
+		goto query_hw_fail;
+	}
+
+	version = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_DE_CORE_ID);
+	DRM_INFO("found ARM Mali-DP%3x version r%dp%d\n", version >> 16,
+		 (version >> 12) & 0xf, (version >> 8) & 0xf);
+
+	/* set the number of lines used for output of RGB data */
+	ret = of_property_read_u8_array(dev->of_node,
+					"arm,malidp-output-port-lines",
+					output_width, MAX_OUTPUT_CHANNELS);
+	if (ret)
+		goto query_hw_fail;
+
+	for (i = 0; i < MAX_OUTPUT_CHANNELS; i++)
+		out_depth = (out_depth << 8) | (output_width[i] & 0xf);
+	malidp_hw_write(hwdev, out_depth, hwdev->map.out_depth_base);
+
+	drm->dev_private = malidp;
+	dev_set_drvdata(dev, drm);
+	atomic_set(&malidp->config_valid, 0);
+	init_waitqueue_head(&malidp->wq);
+
+	ret = malidp_init(drm);
+	if (ret < 0)
+		goto init_fail;
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		goto register_fail;
+
+	/* Set the CRTC's port so that the encoder component can find it */
+	malidp->crtc.port = of_graph_get_next_endpoint(dev->of_node, NULL);
+
+	ret = component_bind_all(dev, drm);
+	of_node_put(malidp->crtc.port);
+
+	if (ret) {
+		DRM_ERROR("Failed to bind all components\n");
+		goto bind_fail;
+	}
+
+	ret = malidp_irq_init(pdev);
+	if (ret < 0)
+		goto irq_init_fail;
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0) {
+		DRM_ERROR("failed to initialise vblank\n");
+		goto vblank_fail;
+	}
+
+	drm_mode_config_reset(drm);
+
+	malidp->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
+					   drm->mode_config.num_connector);
+
+	if (IS_ERR(malidp->fbdev)) {
+		ret = PTR_ERR(malidp->fbdev);
+		malidp->fbdev = NULL;
+		goto fbdev_fail;
+	}
+
+	drm_kms_helper_poll_init(drm);
+	return 0;
+
+fbdev_fail:
+	drm_vblank_cleanup(drm);
+vblank_fail:
+	malidp_se_irq_fini(drm);
+	malidp_de_irq_fini(drm);
+irq_init_fail:
+	component_unbind_all(dev, drm);
+bind_fail:
+	drm_dev_unregister(drm);
+register_fail:
+	malidp_de_planes_destroy(drm);
+	drm_mode_config_cleanup(drm);
+init_fail:
+	drm->dev_private = NULL;
+	dev_set_drvdata(dev, NULL);
+query_hw_fail:
+	clk_disable_unprepare(hwdev->mclk);
+	clk_disable_unprepare(hwdev->aclk);
+	clk_disable_unprepare(hwdev->pclk);
+	drm_dev_unref(drm);
+alloc_fail:
+	of_reserved_mem_device_release(dev);
+
+	return ret;
+}
+
+static void malidp_unbind(struct device *dev)
+{
+	struct drm_device *drm = dev_get_drvdata(dev);
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	if (malidp->fbdev) {
+		drm_fbdev_cma_fini(malidp->fbdev);
+		malidp->fbdev = NULL;
+	}
+	drm_kms_helper_poll_fini(drm);
+	malidp_se_irq_fini(drm);
+	malidp_de_irq_fini(drm);
+	drm_vblank_cleanup(drm);
+	component_unbind_all(dev, drm);
+	drm_dev_unregister(drm);
+	malidp_de_planes_destroy(drm);
+	drm_mode_config_cleanup(drm);
+	drm->dev_private = NULL;
+	dev_set_drvdata(dev, NULL);
+	clk_disable_unprepare(hwdev->mclk);
+	clk_disable_unprepare(hwdev->aclk);
+	clk_disable_unprepare(hwdev->pclk);
+	drm_dev_unref(drm);
+	of_reserved_mem_device_release(dev);
+}
+
+static const struct component_master_ops malidp_master_ops = {
+	.bind = malidp_bind,
+	.unbind = malidp_unbind,
+};
+
+static int malidp_compare_dev(struct device *dev, void *data)
+{
+	struct device_node *np = data;
+
+	return dev->of_node == np;
+}
+
+static int malidp_platform_probe(struct platform_device *pdev)
+{
+	struct device_node *port, *ep;
+	struct component_match *match = NULL;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	/* there is only one output port inside each device, find it */
+	ep = of_graph_get_next_endpoint(pdev->dev.of_node, NULL);
+	if (!ep)
+		return -ENODEV;
+
+	if (!of_device_is_available(ep)) {
+		of_node_put(ep);
+		return -ENODEV;
+	}
+
+	/* add the remote encoder port as component */
+	port = of_graph_get_remote_port_parent(ep);
+	of_node_put(ep);
+	if (!port || !of_device_is_available(port)) {
+		of_node_put(port);
+		return -EAGAIN;
+	}
+
+	component_match_add(&pdev->dev, &match, malidp_compare_dev, port);
+	return component_master_add_with_match(&pdev->dev, &malidp_master_ops,
+					       match);
+}
+
+static int malidp_platform_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &malidp_master_ops);
+	return 0;
+}
+
+static struct platform_driver malidp_platform_driver = {
+	.probe		= malidp_platform_probe,
+	.remove		= malidp_platform_remove,
+	.driver	= {
+		.name = "mali-dp",
+		.of_match_table	= malidp_drm_of_match,
+	},
+};
+
+module_platform_driver(malidp_platform_driver);
+
+MODULE_AUTHOR("Liviu Dudau <Liviu.Dudau@arm.com>");
+MODULE_DESCRIPTION("ARM Mali DP DRM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/arm/malidp_drv.h b/drivers/gpu/drm/arm/malidp_drv.h
new file mode 100644
index 000000000000..95558fde214b
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_drv.h
@@ -0,0 +1,54 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 KMS/DRM driver structures
+ */
+
+#ifndef __MALIDP_DRV_H__
+#define __MALIDP_DRV_H__
+
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include "malidp_hw.h"
+
+struct malidp_drm {
+	struct malidp_hw_device *dev;
+	struct drm_fbdev_cma *fbdev;
+	struct list_head event_list;
+	struct drm_crtc crtc;
+	wait_queue_head_t wq;
+	atomic_t config_valid;
+};
+
+#define crtc_to_malidp_device(x) container_of(x, struct malidp_drm, crtc)
+
+struct malidp_plane {
+	struct drm_plane base;
+	struct malidp_hw_device *hwdev;
+	const struct malidp_layer *layer;
+};
+
+struct malidp_plane_state {
+	struct drm_plane_state base;
+
+	/* size of the required rotation memory if plane is rotated */
+	u32 rotmem_size;
+};
+
+#define to_malidp_plane(x) container_of(x, struct malidp_plane, base)
+#define to_malidp_plane_state(x) container_of(x, struct malidp_plane_state, base)
+
+int malidp_de_planes_init(struct drm_device *drm);
+void malidp_de_planes_destroy(struct drm_device *drm);
+int malidp_crtc_init(struct drm_device *drm);
+
+/* often used combination of rotational bits */
+#define MALIDP_ROTATED_MASK	(BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270))
+
+#endif  /* __MALIDP_DRV_H__ */
diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
new file mode 100644
index 000000000000..a6132f1d58c1
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_hw.c
@@ -0,0 +1,691 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 hardware manipulation routines. This is where
+ * the difference between various versions of the hardware is being dealt with
+ * in an attempt to provide to the rest of the driver code a unified view
+ */
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <drm/drmP.h>
+#include <video/videomode.h>
+#include <video/display_timing.h>
+
+#include "malidp_drv.h"
+#include "malidp_hw.h"
+
+static const struct malidp_input_format malidp500_de_formats[] = {
+	/*    fourcc,   layers supporting the format,     internal id  */
+	{ DRM_FORMAT_ARGB2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  0 },
+	{ DRM_FORMAT_ABGR2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  1 },
+	{ DRM_FORMAT_ARGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  2 },
+	{ DRM_FORMAT_ABGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  3 },
+	{ DRM_FORMAT_XRGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  4 },
+	{ DRM_FORMAT_XBGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  5 },
+	{ DRM_FORMAT_RGB888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  6 },
+	{ DRM_FORMAT_BGR888, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  7 },
+	{ DRM_FORMAT_RGBA5551, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  8 },
+	{ DRM_FORMAT_ABGR1555, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2,  9 },
+	{ DRM_FORMAT_RGB565, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 10 },
+	{ DRM_FORMAT_BGR565, DE_VIDEO1 | DE_GRAPHICS1 | DE_GRAPHICS2, 11 },
+	{ DRM_FORMAT_UYVY, DE_VIDEO1, 12 },
+	{ DRM_FORMAT_YUYV, DE_VIDEO1, 13 },
+	{ DRM_FORMAT_NV12, DE_VIDEO1, 14 },
+	{ DRM_FORMAT_YUV420, DE_VIDEO1, 15 },
+};
+
+#define MALIDP_ID(__group, __format) \
+	((((__group) & 0x7) << 3) | ((__format) & 0x7))
+
+#define MALIDP_COMMON_FORMATS \
+	/*    fourcc,   layers supporting the format,      internal id   */ \
+	{ DRM_FORMAT_ARGB2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(0, 0) }, \
+	{ DRM_FORMAT_ABGR2101010, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(0, 1) }, \
+	{ DRM_FORMAT_RGBA1010102, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(0, 2) }, \
+	{ DRM_FORMAT_BGRA1010102, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(0, 3) }, \
+	{ DRM_FORMAT_ARGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 0) }, \
+	{ DRM_FORMAT_ABGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 1) }, \
+	{ DRM_FORMAT_RGBA8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 2) }, \
+	{ DRM_FORMAT_BGRA8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(1, 3) }, \
+	{ DRM_FORMAT_XRGB8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(2, 0) }, \
+	{ DRM_FORMAT_XBGR8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(2, 1) }, \
+	{ DRM_FORMAT_RGBX8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(2, 2) }, \
+	{ DRM_FORMAT_BGRX8888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2 | DE_SMART, MALIDP_ID(2, 3) }, \
+	{ DRM_FORMAT_RGB888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(3, 0) }, \
+	{ DRM_FORMAT_BGR888, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(3, 1) }, \
+	{ DRM_FORMAT_RGBA5551, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 0) }, \
+	{ DRM_FORMAT_ABGR1555, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 1) }, \
+	{ DRM_FORMAT_RGB565, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 2) }, \
+	{ DRM_FORMAT_BGR565, DE_VIDEO1 | DE_GRAPHICS1 | DE_VIDEO2, MALIDP_ID(4, 3) }, \
+	{ DRM_FORMAT_YUYV, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 2) },	\
+	{ DRM_FORMAT_UYVY, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 3) },	\
+	{ DRM_FORMAT_NV12, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 6) },	\
+	{ DRM_FORMAT_YUV420, DE_VIDEO1 | DE_VIDEO2, MALIDP_ID(5, 7) }
+
+static const struct malidp_input_format malidp550_de_formats[] = {
+	MALIDP_COMMON_FORMATS,
+};
+
+static const struct malidp_layer malidp500_layers[] = {
+	{ DE_VIDEO1, MALIDP500_DE_LV_BASE, MALIDP500_DE_LV_PTR_BASE },
+	{ DE_GRAPHICS1, MALIDP500_DE_LG1_BASE, MALIDP500_DE_LG1_PTR_BASE },
+	{ DE_GRAPHICS2, MALIDP500_DE_LG2_BASE, MALIDP500_DE_LG2_PTR_BASE },
+};
+
+static const struct malidp_layer malidp550_layers[] = {
+	{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE },
+	{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE },
+	{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE },
+	{ DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE },
+};
+
+#define MALIDP_DE_DEFAULT_PREFETCH_START	5
+
+static int malidp500_query_hw(struct malidp_hw_device *hwdev)
+{
+	u32 conf = malidp_hw_read(hwdev, MALIDP500_CONFIG_ID);
+	/* bit 4 of the CONFIG_ID register holds the line size multiplier */
+	u8 ln_size_mult = conf & 0x10 ? 2 : 1;
+
+	hwdev->min_line_size = 2;
+	hwdev->max_line_size = SZ_2K * ln_size_mult;
+	hwdev->rotation_memory[0] = SZ_1K * 64 * ln_size_mult;
+	hwdev->rotation_memory[1] = 0; /* no second rotation memory bank */
+
+	return 0;
+}
+
+static void malidp500_enter_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status, count = 100;
+
+	malidp_hw_setbits(hwdev, MALIDP500_DC_CONFIG_REQ, MALIDP500_DC_CONTROL);
+	while (count) {
+		status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+		if ((status & MALIDP500_DC_CONFIG_REQ) == MALIDP500_DC_CONFIG_REQ)
+			break;
+		/*
+		 * entering config mode can take as long as the rendering
+		 * of a full frame, hence the long sleep here
+		 */
+		usleep_range(1000, 10000);
+		count--;
+	}
+	WARN(count == 0, "timeout while entering config mode");
+}
+
+static void malidp500_leave_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status, count = 100;
+
+	malidp_hw_clearbits(hwdev, MALIDP500_DC_CONFIG_REQ, MALIDP500_DC_CONTROL);
+	while (count) {
+		status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+		if ((status & MALIDP500_DC_CONFIG_REQ) == 0)
+			break;
+		usleep_range(100, 1000);
+		count--;
+	}
+	WARN(count == 0, "timeout while leaving config mode");
+}
+
+static bool malidp500_in_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status;
+
+	status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+	if ((status & MALIDP500_DC_CONFIG_REQ) == MALIDP500_DC_CONFIG_REQ)
+		return true;
+
+	return false;
+}
+
+static void malidp500_set_config_valid(struct malidp_hw_device *hwdev)
+{
+	malidp_hw_setbits(hwdev, MALIDP_CFG_VALID, MALIDP500_CONFIG_VALID);
+}
+
+static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode *mode)
+{
+	u32 val = 0;
+
+	malidp_hw_clearbits(hwdev, MALIDP500_DC_CLEAR_MASK, MALIDP500_DC_CONTROL);
+	if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+		val |= MALIDP500_HSYNCPOL;
+	if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+		val |= MALIDP500_VSYNCPOL;
+	val |= MALIDP_DE_DEFAULT_PREFETCH_START;
+	malidp_hw_setbits(hwdev, val, MALIDP500_DC_CONTROL);
+
+	/*
+	 * Mali-DP500 encodes the background color like this:
+	 *    - red   @ MALIDP500_BGND_COLOR[12:0]
+	 *    - green @ MALIDP500_BGND_COLOR[27:16]
+	 *    - blue  @ (MALIDP500_BGND_COLOR + 4)[12:0]
+	 */
+	val = ((MALIDP_BGND_COLOR_G & 0xfff) << 16) |
+	      (MALIDP_BGND_COLOR_R & 0xfff);
+	malidp_hw_write(hwdev, val, MALIDP500_BGND_COLOR);
+	malidp_hw_write(hwdev, MALIDP_BGND_COLOR_B, MALIDP500_BGND_COLOR + 4);
+
+	val = MALIDP_DE_H_FRONTPORCH(mode->hfront_porch) |
+		MALIDP_DE_H_BACKPORCH(mode->hback_porch);
+	malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_H_TIMINGS);
+
+	val = MALIDP500_DE_V_FRONTPORCH(mode->vfront_porch) |
+		MALIDP_DE_V_BACKPORCH(mode->vback_porch);
+	malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_V_TIMINGS);
+
+	val = MALIDP_DE_H_SYNCWIDTH(mode->hsync_len) |
+		MALIDP_DE_V_SYNCWIDTH(mode->vsync_len);
+	malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_SYNC_WIDTH);
+
+	val = MALIDP_DE_H_ACTIVE(mode->hactive) | MALIDP_DE_V_ACTIVE(mode->vactive);
+	malidp_hw_write(hwdev, val, MALIDP500_TIMINGS_BASE + MALIDP_DE_HV_ACTIVE);
+
+	if (mode->flags & DISPLAY_FLAGS_INTERLACED)
+		malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
+	else
+		malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
+}
+
+static int malidp500_rotmem_required(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt)
+{
+	unsigned int depth;
+	int bpp;
+
+	/* RGB888 or BGR888 can't be rotated */
+	if ((fmt == DRM_FORMAT_RGB888) || (fmt == DRM_FORMAT_BGR888))
+		return -EINVAL;
+
+	/*
+	 * Each layer needs enough rotation memory to fit 8 lines
+	 * worth of pixel data. Required size is then:
+	 *    size = rotated_width * (bpp / 8) * 8;
+	 */
+	drm_fb_get_bpp_depth(fmt, &depth, &bpp);
+
+	return w * bpp;
+}
+
+static int malidp550_query_hw(struct malidp_hw_device *hwdev)
+{
+	u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID);
+	u8 ln_size = (conf >> 4) & 0x3, rsize;
+
+	hwdev->min_line_size = 2;
+
+	switch (ln_size) {
+	case 0:
+		hwdev->max_line_size = SZ_2K;
+		/* two banks of 64KB for rotation memory */
+		rsize = 64;
+		break;
+	case 1:
+		hwdev->max_line_size = SZ_4K;
+		/* two banks of 128KB for rotation memory */
+		rsize = 128;
+		break;
+	case 2:
+		hwdev->max_line_size = 1280;
+		/* two banks of 40KB for rotation memory */
+		rsize = 40;
+		break;
+	case 3:
+		/* reserved value */
+		hwdev->max_line_size = 0;
+		return -EINVAL;
+	}
+
+	hwdev->rotation_memory[0] = hwdev->rotation_memory[1] = rsize * SZ_1K;
+	return 0;
+}
+
+static void malidp550_enter_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status, count = 100;
+
+	malidp_hw_setbits(hwdev, MALIDP550_DC_CONFIG_REQ, MALIDP550_DC_CONTROL);
+	while (count) {
+		status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+		if ((status & MALIDP550_DC_CONFIG_REQ) == MALIDP550_DC_CONFIG_REQ)
+			break;
+		/*
+		 * entering config mode can take as long as the rendering
+		 * of a full frame, hence the long sleep here
+		 */
+		usleep_range(1000, 10000);
+		count--;
+	}
+	WARN(count == 0, "timeout while entering config mode");
+}
+
+static void malidp550_leave_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status, count = 100;
+
+	malidp_hw_clearbits(hwdev, MALIDP550_DC_CONFIG_REQ, MALIDP550_DC_CONTROL);
+	while (count) {
+		status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+		if ((status & MALIDP550_DC_CONFIG_REQ) == 0)
+			break;
+		usleep_range(100, 1000);
+		count--;
+	}
+	WARN(count == 0, "timeout while leaving config mode");
+}
+
+static bool malidp550_in_config_mode(struct malidp_hw_device *hwdev)
+{
+	u32 status;
+
+	status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+	if ((status & MALIDP550_DC_CONFIG_REQ) == MALIDP550_DC_CONFIG_REQ)
+		return true;
+
+	return false;
+}
+
+static void malidp550_set_config_valid(struct malidp_hw_device *hwdev)
+{
+	malidp_hw_setbits(hwdev, MALIDP_CFG_VALID, MALIDP550_CONFIG_VALID);
+}
+
+static void malidp550_modeset(struct malidp_hw_device *hwdev, struct videomode *mode)
+{
+	u32 val = MALIDP_DE_DEFAULT_PREFETCH_START;
+
+	malidp_hw_write(hwdev, val, MALIDP550_DE_CONTROL);
+	/*
+	 * Mali-DP550 and Mali-DP650 encode the background color like this:
+	 *   - red   @ MALIDP550_DE_BGND_COLOR[23:16]
+	 *   - green @ MALIDP550_DE_BGND_COLOR[15:8]
+	 *   - blue  @ MALIDP550_DE_BGND_COLOR[7:0]
+	 *
+	 * We need to truncate the least significant 4 bits from the default
+	 * MALIDP_BGND_COLOR_x values
+	 */
+	val = (((MALIDP_BGND_COLOR_R >> 4) & 0xff) << 16) |
+	      (((MALIDP_BGND_COLOR_G >> 4) & 0xff) << 8) |
+	      ((MALIDP_BGND_COLOR_B >> 4) & 0xff);
+	malidp_hw_write(hwdev, val, MALIDP550_DE_BGND_COLOR);
+
+	val = MALIDP_DE_H_FRONTPORCH(mode->hfront_porch) |
+		MALIDP_DE_H_BACKPORCH(mode->hback_porch);
+	malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_H_TIMINGS);
+
+	val = MALIDP550_DE_V_FRONTPORCH(mode->vfront_porch) |
+		MALIDP_DE_V_BACKPORCH(mode->vback_porch);
+	malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_V_TIMINGS);
+
+	val = MALIDP_DE_H_SYNCWIDTH(mode->hsync_len) |
+		MALIDP_DE_V_SYNCWIDTH(mode->vsync_len);
+	if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+		val |= MALIDP550_HSYNCPOL;
+	if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+		val |= MALIDP550_VSYNCPOL;
+	malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_SYNC_WIDTH);
+
+	val = MALIDP_DE_H_ACTIVE(mode->hactive) | MALIDP_DE_V_ACTIVE(mode->vactive);
+	malidp_hw_write(hwdev, val, MALIDP550_TIMINGS_BASE + MALIDP_DE_HV_ACTIVE);
+
+	if (mode->flags & DISPLAY_FLAGS_INTERLACED)
+		malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
+	else
+		malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC);
+}
+
+static int malidp550_rotmem_required(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt)
+{
+	u32 bytes_per_col;
+
+	/* raw RGB888 or BGR888 can't be rotated */
+	if ((fmt == DRM_FORMAT_RGB888) || (fmt == DRM_FORMAT_BGR888))
+		return -EINVAL;
+
+	switch (fmt) {
+	/* 8 lines at 4 bytes per pixel */
+	case DRM_FORMAT_ARGB2101010:
+	case DRM_FORMAT_ABGR2101010:
+	case DRM_FORMAT_RGBA1010102:
+	case DRM_FORMAT_BGRA1010102:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_RGBA8888:
+	case DRM_FORMAT_BGRA8888:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_RGBX8888:
+	case DRM_FORMAT_BGRX8888:
+	case DRM_FORMAT_RGB888:
+	case DRM_FORMAT_BGR888:
+	/* 16 lines at 2 bytes per pixel */
+	case DRM_FORMAT_RGBA5551:
+	case DRM_FORMAT_ABGR1555:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_YUYV:
+		bytes_per_col = 32;
+		break;
+	/* 16 lines at 1.5 bytes per pixel */
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_YUV420:
+		bytes_per_col = 24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return w * bytes_per_col;
+}
+
+static int malidp650_query_hw(struct malidp_hw_device *hwdev)
+{
+	u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID);
+	u8 ln_size = (conf >> 4) & 0x3, rsize;
+
+	hwdev->min_line_size = 4;
+
+	switch (ln_size) {
+	case 0:
+	case 2:
+		/* reserved values */
+		hwdev->max_line_size = 0;
+		return -EINVAL;
+	case 1:
+		hwdev->max_line_size = SZ_4K;
+		/* two banks of 128KB for rotation memory */
+		rsize = 128;
+		break;
+	case 3:
+		hwdev->max_line_size = 2560;
+		/* two banks of 80KB for rotation memory */
+		rsize = 80;
+	}
+
+	hwdev->rotation_memory[0] = hwdev->rotation_memory[1] = rsize * SZ_1K;
+	return 0;
+}
+
+const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES] = {
+	[MALIDP_500] = {
+		.map = {
+			.se_base = MALIDP500_SE_BASE,
+			.dc_base = MALIDP500_DC_BASE,
+			.out_depth_base = MALIDP500_OUTPUT_DEPTH,
+			.features = 0,	/* no CLEARIRQ register */
+			.n_layers = ARRAY_SIZE(malidp500_layers),
+			.layers = malidp500_layers,
+			.de_irq_map = {
+				.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
+					    MALIDP500_DE_IRQ_AXI_ERR |
+					    MALIDP500_DE_IRQ_VSYNC |
+					    MALIDP500_DE_IRQ_GLOBAL,
+				.vsync_irq = MALIDP500_DE_IRQ_VSYNC,
+			},
+			.se_irq_map = {
+				.irq_mask = MALIDP500_SE_IRQ_CONF_MODE,
+				.vsync_irq = 0,
+			},
+			.dc_irq_map = {
+				.irq_mask = MALIDP500_DE_IRQ_CONF_VALID,
+				.vsync_irq = MALIDP500_DE_IRQ_CONF_VALID,
+			},
+			.input_formats = malidp500_de_formats,
+			.n_input_formats = ARRAY_SIZE(malidp500_de_formats),
+		},
+		.query_hw = malidp500_query_hw,
+		.enter_config_mode = malidp500_enter_config_mode,
+		.leave_config_mode = malidp500_leave_config_mode,
+		.in_config_mode = malidp500_in_config_mode,
+		.set_config_valid = malidp500_set_config_valid,
+		.modeset = malidp500_modeset,
+		.rotmem_required = malidp500_rotmem_required,
+	},
+	[MALIDP_550] = {
+		.map = {
+			.se_base = MALIDP550_SE_BASE,
+			.dc_base = MALIDP550_DC_BASE,
+			.out_depth_base = MALIDP550_DE_OUTPUT_DEPTH,
+			.features = MALIDP_REGMAP_HAS_CLEARIRQ,
+			.n_layers = ARRAY_SIZE(malidp550_layers),
+			.layers = malidp550_layers,
+			.de_irq_map = {
+				.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
+					    MALIDP550_DE_IRQ_VSYNC,
+				.vsync_irq = MALIDP550_DE_IRQ_VSYNC,
+			},
+			.se_irq_map = {
+				.irq_mask = MALIDP550_SE_IRQ_EOW |
+					    MALIDP550_SE_IRQ_AXI_ERR,
+			},
+			.dc_irq_map = {
+				.irq_mask = MALIDP550_DC_IRQ_CONF_VALID,
+				.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
+			},
+			.input_formats = malidp550_de_formats,
+			.n_input_formats = ARRAY_SIZE(malidp550_de_formats),
+		},
+		.query_hw = malidp550_query_hw,
+		.enter_config_mode = malidp550_enter_config_mode,
+		.leave_config_mode = malidp550_leave_config_mode,
+		.in_config_mode = malidp550_in_config_mode,
+		.set_config_valid = malidp550_set_config_valid,
+		.modeset = malidp550_modeset,
+		.rotmem_required = malidp550_rotmem_required,
+	},
+	[MALIDP_650] = {
+		.map = {
+			.se_base = MALIDP550_SE_BASE,
+			.dc_base = MALIDP550_DC_BASE,
+			.out_depth_base = MALIDP550_DE_OUTPUT_DEPTH,
+			.features = MALIDP_REGMAP_HAS_CLEARIRQ,
+			.n_layers = ARRAY_SIZE(malidp550_layers),
+			.layers = malidp550_layers,
+			.de_irq_map = {
+				.irq_mask = MALIDP_DE_IRQ_UNDERRUN |
+					    MALIDP650_DE_IRQ_DRIFT |
+					    MALIDP550_DE_IRQ_VSYNC,
+				.vsync_irq = MALIDP550_DE_IRQ_VSYNC,
+			},
+			.se_irq_map = {
+				.irq_mask = MALIDP550_SE_IRQ_EOW |
+					    MALIDP550_SE_IRQ_AXI_ERR,
+			},
+			.dc_irq_map = {
+				.irq_mask = MALIDP550_DC_IRQ_CONF_VALID,
+				.vsync_irq = MALIDP550_DC_IRQ_CONF_VALID,
+			},
+			.input_formats = malidp550_de_formats,
+			.n_input_formats = ARRAY_SIZE(malidp550_de_formats),
+		},
+		.query_hw = malidp650_query_hw,
+		.enter_config_mode = malidp550_enter_config_mode,
+		.leave_config_mode = malidp550_leave_config_mode,
+		.in_config_mode = malidp550_in_config_mode,
+		.set_config_valid = malidp550_set_config_valid,
+		.modeset = malidp550_modeset,
+		.rotmem_required = malidp550_rotmem_required,
+	},
+};
+
+u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
+			   u8 layer_id, u32 format)
+{
+	unsigned int i;
+
+	for (i = 0; i < map->n_input_formats; i++) {
+		if (((map->input_formats[i].layer & layer_id) == layer_id) &&
+		    (map->input_formats[i].format == format))
+			return map->input_formats[i].id;
+	}
+
+	return MALIDP_INVALID_FORMAT_ID;
+}
+
+static void malidp_hw_clear_irq(struct malidp_hw_device *hwdev, u8 block, u32 irq)
+{
+	u32 base = malidp_get_block_base(hwdev, block);
+
+	if (hwdev->map.features & MALIDP_REGMAP_HAS_CLEARIRQ)
+		malidp_hw_write(hwdev, irq, base + MALIDP_REG_CLEARIRQ);
+	else
+		malidp_hw_write(hwdev, irq, base + MALIDP_REG_STATUS);
+}
+
+static irqreturn_t malidp_de_irq(int irq, void *arg)
+{
+	struct drm_device *drm = arg;
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev;
+	const struct malidp_irq_map *de;
+	u32 status, mask, dc_status;
+	irqreturn_t ret = IRQ_NONE;
+
+	if (!drm->dev_private)
+		return IRQ_HANDLED;
+
+	hwdev = malidp->dev;
+	de = &hwdev->map.de_irq_map;
+
+	/* first handle the config valid IRQ */
+	dc_status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
+	if (dc_status & hwdev->map.dc_irq_map.vsync_irq) {
+		/* we have a page flip event */
+		atomic_set(&malidp->config_valid, 1);
+		malidp_hw_clear_irq(hwdev, MALIDP_DC_BLOCK, dc_status);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	status = malidp_hw_read(hwdev, MALIDP_REG_STATUS);
+	if (!(status & de->irq_mask))
+		return ret;
+
+	mask = malidp_hw_read(hwdev, MALIDP_REG_MASKIRQ);
+	status &= mask;
+	if (status & de->vsync_irq)
+		drm_crtc_handle_vblank(&malidp->crtc);
+
+	malidp_hw_clear_irq(hwdev, MALIDP_DE_BLOCK, status);
+
+	return (ret == IRQ_NONE) ? IRQ_HANDLED : ret;
+}
+
+static irqreturn_t malidp_de_irq_thread_handler(int irq, void *arg)
+{
+	struct drm_device *drm = arg;
+	struct malidp_drm *malidp = drm->dev_private;
+
+	wake_up(&malidp->wq);
+
+	return IRQ_HANDLED;
+}
+
+int malidp_de_irq_init(struct drm_device *drm, int irq)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+	int ret;
+
+	/* ensure interrupts are disabled */
+	malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
+	malidp_hw_clear_irq(hwdev, MALIDP_DE_BLOCK, 0xffffffff);
+	malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
+	malidp_hw_clear_irq(hwdev, MALIDP_DC_BLOCK, 0xffffffff);
+
+	ret = devm_request_threaded_irq(drm->dev, irq, malidp_de_irq,
+					malidp_de_irq_thread_handler,
+					IRQF_SHARED, "malidp-de", drm);
+	if (ret < 0) {
+		DRM_ERROR("failed to install DE IRQ handler\n");
+		return ret;
+	}
+
+	/* first enable the DC block IRQs */
+	malidp_hw_enable_irq(hwdev, MALIDP_DC_BLOCK,
+			     hwdev->map.dc_irq_map.irq_mask);
+
+	/* now enable the DE block IRQs */
+	malidp_hw_enable_irq(hwdev, MALIDP_DE_BLOCK,
+			     hwdev->map.de_irq_map.irq_mask);
+
+	return 0;
+}
+
+void malidp_de_irq_fini(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	malidp_hw_disable_irq(hwdev, MALIDP_DE_BLOCK,
+			      hwdev->map.de_irq_map.irq_mask);
+	malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK,
+			      hwdev->map.dc_irq_map.irq_mask);
+}
+
+static irqreturn_t malidp_se_irq(int irq, void *arg)
+{
+	struct drm_device *drm = arg;
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+	u32 status, mask;
+
+	status = malidp_hw_read(hwdev, hwdev->map.se_base + MALIDP_REG_STATUS);
+	if (!(status & hwdev->map.se_irq_map.irq_mask))
+		return IRQ_NONE;
+
+	mask = malidp_hw_read(hwdev, hwdev->map.se_base + MALIDP_REG_MASKIRQ);
+	status = malidp_hw_read(hwdev, hwdev->map.se_base + MALIDP_REG_STATUS);
+	status &= mask;
+	/* ToDo: status decoding and firing up of VSYNC and page flip events */
+
+	malidp_hw_clear_irq(hwdev, MALIDP_SE_BLOCK, status);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t malidp_se_irq_thread_handler(int irq, void *arg)
+{
+	return IRQ_HANDLED;
+}
+
+int malidp_se_irq_init(struct drm_device *drm, int irq)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+	int ret;
+
+	/* ensure interrupts are disabled */
+	malidp_hw_disable_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
+	malidp_hw_clear_irq(hwdev, MALIDP_SE_BLOCK, 0xffffffff);
+
+	ret = devm_request_threaded_irq(drm->dev, irq, malidp_se_irq,
+					malidp_se_irq_thread_handler,
+					IRQF_SHARED, "malidp-se", drm);
+	if (ret < 0) {
+		DRM_ERROR("failed to install SE IRQ handler\n");
+		return ret;
+	}
+
+	malidp_hw_enable_irq(hwdev, MALIDP_SE_BLOCK,
+			     hwdev->map.se_irq_map.irq_mask);
+
+	return 0;
+}
+
+void malidp_se_irq_fini(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	malidp_hw_disable_irq(hwdev, MALIDP_SE_BLOCK,
+			      hwdev->map.se_irq_map.irq_mask);
+}
diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
new file mode 100644
index 000000000000..141743e9f3a6
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_hw.h
@@ -0,0 +1,241 @@
+/*
+ *
+ * (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP hardware manipulation routines.
+ */
+
+#ifndef __MALIDP_HW_H__
+#define __MALIDP_HW_H__
+
+#include <linux/bitops.h>
+#include "malidp_regs.h"
+
+struct videomode;
+struct clk;
+
+/* Mali DP IP blocks */
+enum {
+	MALIDP_DE_BLOCK = 0,
+	MALIDP_SE_BLOCK,
+	MALIDP_DC_BLOCK
+};
+
+/* Mali DP layer IDs */
+enum {
+	DE_VIDEO1 = BIT(0),
+	DE_GRAPHICS1 = BIT(1),
+	DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
+	DE_VIDEO2 = BIT(3),
+	DE_SMART = BIT(4),
+};
+
+struct malidp_input_format {
+	u32 format;		/* DRM fourcc */
+	u8 layer;		/* bitmask of layers supporting it */
+	u8 id;			/* used internally */
+};
+
+#define MALIDP_INVALID_FORMAT_ID	0xff
+
+/*
+ * hide the differences between register maps
+ * by using a common structure to hold the
+ * base register offsets
+ */
+
+struct malidp_irq_map {
+	u32 irq_mask;		/* mask of IRQs that can be enabled in the block */
+	u32 vsync_irq;		/* IRQ bit used for signaling during VSYNC */
+};
+
+struct malidp_layer {
+	u16 id;			/* layer ID */
+	u16 base;		/* address offset for the register bank */
+	u16 ptr;		/* address offset for the pointer register */
+};
+
+/* regmap features */
+#define MALIDP_REGMAP_HAS_CLEARIRQ	(1 << 0)
+
+struct malidp_hw_regmap {
+	/* address offset of the DE register bank */
+	/* is always 0x0000 */
+	/* address offset of the SE registers bank */
+	const u16 se_base;
+	/* address offset of the DC registers bank */
+	const u16 dc_base;
+
+	/* address offset for the output depth register */
+	const u16 out_depth_base;
+
+	/* bitmap with register map features */
+	const u8 features;
+
+	/* list of supported layers */
+	const u8 n_layers;
+	const struct malidp_layer *layers;
+
+	const struct malidp_irq_map de_irq_map;
+	const struct malidp_irq_map se_irq_map;
+	const struct malidp_irq_map dc_irq_map;
+
+	/* list of supported input formats for each layer */
+	const struct malidp_input_format *input_formats;
+	const u8 n_input_formats;
+};
+
+struct malidp_hw_device {
+	const struct malidp_hw_regmap map;
+	void __iomem *regs;
+
+	/* APB clock */
+	struct clk *pclk;
+	/* AXI clock */
+	struct clk *aclk;
+	/* main clock for display core */
+	struct clk *mclk;
+	/* pixel clock for display core */
+	struct clk *pxlclk;
+
+	/*
+	 * Validate the driver instance against the hardware bits
+	 */
+	int (*query_hw)(struct malidp_hw_device *hwdev);
+
+	/*
+	 * Set the hardware into config mode, ready to accept mode changes
+	 */
+	void (*enter_config_mode)(struct malidp_hw_device *hwdev);
+
+	/*
+	 * Tell hardware to exit configuration mode
+	 */
+	void (*leave_config_mode)(struct malidp_hw_device *hwdev);
+
+	/*
+	 * Query if hardware is in configuration mode
+	 */
+	bool (*in_config_mode)(struct malidp_hw_device *hwdev);
+
+	/*
+	 * Set configuration valid flag for hardware parameters that can
+	 * be changed outside the configuration mode. Hardware will use
+	 * the new settings when config valid is set after the end of the
+	 * current buffer scanout
+	 */
+	void (*set_config_valid)(struct malidp_hw_device *hwdev);
+
+	/*
+	 * Set a new mode in hardware. Requires the hardware to be in
+	 * configuration mode before this function is called.
+	 */
+	void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
+
+	/*
+	 * Calculate the required rotation memory given the active area
+	 * and the buffer format.
+	 */
+	int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
+
+	u8 features;
+
+	u8 min_line_size;
+	u16 max_line_size;
+
+	/* size of memory used for rotating layers, up to two banks available */
+	u32 rotation_memory[2];
+};
+
+/* Supported variants of the hardware */
+enum {
+	MALIDP_500 = 0,
+	MALIDP_550,
+	MALIDP_650,
+	/* keep the next entry last */
+	MALIDP_MAX_DEVICES
+};
+
+extern const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES];
+
+static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
+{
+	return readl(hwdev->regs + reg);
+}
+
+static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
+				   u32 value, u32 reg)
+{
+	writel(value, hwdev->regs + reg);
+}
+
+static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
+				     u32 mask, u32 reg)
+{
+	u32 data = malidp_hw_read(hwdev, reg);
+
+	data |= mask;
+	malidp_hw_write(hwdev, data, reg);
+}
+
+static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
+				       u32 mask, u32 reg)
+{
+	u32 data = malidp_hw_read(hwdev, reg);
+
+	data &= ~mask;
+	malidp_hw_write(hwdev, data, reg);
+}
+
+static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
+					u8 block)
+{
+	switch (block) {
+	case MALIDP_SE_BLOCK:
+		return hwdev->map.se_base;
+	case MALIDP_DC_BLOCK:
+		return hwdev->map.dc_base;
+	}
+
+	return 0;
+}
+
+static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
+					 u8 block, u32 irq)
+{
+	u32 base = malidp_get_block_base(hwdev, block);
+
+	malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
+}
+
+static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
+					u8 block, u32 irq)
+{
+	u32 base = malidp_get_block_base(hwdev, block);
+
+	malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
+}
+
+int malidp_de_irq_init(struct drm_device *drm, int irq);
+void malidp_de_irq_fini(struct drm_device *drm);
+int malidp_se_irq_init(struct drm_device *drm, int irq);
+void malidp_se_irq_fini(struct drm_device *drm);
+
+u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
+			   u8 layer_id, u32 format);
+
+/*
+ * background color components are defined as 12bits values,
+ * they will be shifted right when stored on hardware that
+ * supports only 8bits per channel
+ */
+#define MALIDP_BGND_COLOR_R		0x000
+#define MALIDP_BGND_COLOR_G		0x000
+#define MALIDP_BGND_COLOR_B		0x000
+
+#endif  /* __MALIDP_HW_H__ */
diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
new file mode 100644
index 000000000000..725098d6179a
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_planes.c
@@ -0,0 +1,298 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP plane manipulation routines.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_plane_helper.h>
+
+#include "malidp_hw.h"
+#include "malidp_drv.h"
+
+/* Layer specific register offsets */
+#define MALIDP_LAYER_FORMAT		0x000
+#define MALIDP_LAYER_CONTROL		0x004
+#define   LAYER_ENABLE			(1 << 0)
+#define   LAYER_ROT_OFFSET		8
+#define   LAYER_H_FLIP			(1 << 10)
+#define   LAYER_V_FLIP			(1 << 11)
+#define   LAYER_ROT_MASK		(0xf << 8)
+#define MALIDP_LAYER_SIZE		0x00c
+#define   LAYER_H_VAL(x)		(((x) & 0x1fff) << 0)
+#define   LAYER_V_VAL(x)		(((x) & 0x1fff) << 16)
+#define MALIDP_LAYER_COMP_SIZE		0x010
+#define MALIDP_LAYER_OFFSET		0x014
+#define MALIDP_LAYER_STRIDE		0x018
+
+static void malidp_de_plane_destroy(struct drm_plane *plane)
+{
+	struct malidp_plane *mp = to_malidp_plane(plane);
+
+	if (mp->base.fb)
+		drm_framebuffer_unreference(mp->base.fb);
+
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
+	devm_kfree(plane->dev->dev, mp);
+}
+
+struct drm_plane_state *malidp_duplicate_plane_state(struct drm_plane *plane)
+{
+	struct malidp_plane_state *state, *m_state;
+
+	if (!plane->state)
+		return NULL;
+
+	state = kmalloc(sizeof(*state), GFP_KERNEL);
+	if (state) {
+		m_state = to_malidp_plane_state(plane->state);
+		__drm_atomic_helper_plane_duplicate_state(plane, &state->base);
+		state->rotmem_size = m_state->rotmem_size;
+	}
+
+	return &state->base;
+}
+
+void malidp_destroy_plane_state(struct drm_plane *plane,
+				struct drm_plane_state *state)
+{
+	struct malidp_plane_state *m_state = to_malidp_plane_state(state);
+
+	__drm_atomic_helper_plane_destroy_state(state);
+	kfree(m_state);
+}
+
+static const struct drm_plane_funcs malidp_de_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.destroy = malidp_de_plane_destroy,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = malidp_duplicate_plane_state,
+	.atomic_destroy_state = malidp_destroy_plane_state,
+};
+
+static int malidp_de_plane_check(struct drm_plane *plane,
+				 struct drm_plane_state *state)
+{
+	struct malidp_plane *mp = to_malidp_plane(plane);
+	struct malidp_plane_state *ms = to_malidp_plane_state(state);
+	u8 format_id;
+	u32 src_w, src_h;
+
+	if (!state->crtc || !state->fb)
+		return 0;
+
+	format_id = malidp_hw_get_format_id(&mp->hwdev->map, mp->layer->id,
+					    state->fb->pixel_format);
+	if (format_id == MALIDP_INVALID_FORMAT_ID)
+		return -EINVAL;
+
+	src_w = state->src_w >> 16;
+	src_h = state->src_h >> 16;
+
+	if ((state->crtc_w > mp->hwdev->max_line_size) ||
+	    (state->crtc_h > mp->hwdev->max_line_size) ||
+	    (state->crtc_w < mp->hwdev->min_line_size) ||
+	    (state->crtc_h < mp->hwdev->min_line_size) ||
+	    (state->crtc_w != src_w) || (state->crtc_h != src_h))
+		return -EINVAL;
+
+	/* packed RGB888 / BGR888 can't be rotated or flipped */
+	if (state->rotation != BIT(DRM_ROTATE_0) &&
+	    (state->fb->pixel_format == DRM_FORMAT_RGB888 ||
+	     state->fb->pixel_format == DRM_FORMAT_BGR888))
+		return -EINVAL;
+
+	ms->rotmem_size = 0;
+	if (state->rotation & MALIDP_ROTATED_MASK) {
+		int val;
+
+		val = mp->hwdev->rotmem_required(mp->hwdev, state->crtc_h,
+						 state->crtc_w,
+						 state->fb->pixel_format);
+		if (val < 0)
+			return val;
+
+		ms->rotmem_size = val;
+	}
+
+	return 0;
+}
+
+static void malidp_de_plane_update(struct drm_plane *plane,
+				   struct drm_plane_state *old_state)
+{
+	struct drm_gem_cma_object *obj;
+	struct malidp_plane *mp;
+	const struct malidp_hw_regmap *map;
+	u8 format_id;
+	u16 ptr;
+	u32 format, src_w, src_h, dest_w, dest_h, val = 0;
+	int num_planes, i;
+
+	mp = to_malidp_plane(plane);
+
+	map = &mp->hwdev->map;
+	format = plane->state->fb->pixel_format;
+	format_id = malidp_hw_get_format_id(map, mp->layer->id, format);
+	num_planes = drm_format_num_planes(format);
+
+	/* convert src values from Q16 fixed point to integer */
+	src_w = plane->state->src_w >> 16;
+	src_h = plane->state->src_h >> 16;
+	if (plane->state->rotation & MALIDP_ROTATED_MASK) {
+		dest_w = plane->state->crtc_h;
+		dest_h = plane->state->crtc_w;
+	} else {
+		dest_w = plane->state->crtc_w;
+		dest_h = plane->state->crtc_h;
+	}
+
+	malidp_hw_write(mp->hwdev, format_id, mp->layer->base);
+
+	for (i = 0; i < num_planes; i++) {
+		/* calculate the offset for the layer's plane registers */
+		ptr = mp->layer->ptr + (i << 4);
+
+		obj = drm_fb_cma_get_gem_obj(plane->state->fb, i);
+		malidp_hw_write(mp->hwdev, lower_32_bits(obj->paddr), ptr);
+		malidp_hw_write(mp->hwdev, upper_32_bits(obj->paddr), ptr + 4);
+		malidp_hw_write(mp->hwdev, plane->state->fb->pitches[i],
+				mp->layer->base + MALIDP_LAYER_STRIDE);
+	}
+
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
+			mp->layer->base + MALIDP_LAYER_SIZE);
+
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(dest_w) | LAYER_V_VAL(dest_h),
+			mp->layer->base + MALIDP_LAYER_COMP_SIZE);
+
+	malidp_hw_write(mp->hwdev, LAYER_H_VAL(plane->state->crtc_x) |
+			LAYER_V_VAL(plane->state->crtc_y),
+			mp->layer->base + MALIDP_LAYER_OFFSET);
+
+	/* first clear the rotation bits in the register */
+	malidp_hw_clearbits(mp->hwdev, LAYER_ROT_MASK,
+			    mp->layer->base + MALIDP_LAYER_CONTROL);
+
+	/* setup the rotation and axis flip bits */
+	if (plane->state->rotation & DRM_ROTATE_MASK)
+		val = ilog2(plane->state->rotation & DRM_ROTATE_MASK) << LAYER_ROT_OFFSET;
+	if (plane->state->rotation & BIT(DRM_REFLECT_X))
+		val |= LAYER_V_FLIP;
+	if (plane->state->rotation & BIT(DRM_REFLECT_Y))
+		val |= LAYER_H_FLIP;
+
+	/* set the 'enable layer' bit */
+	val |= LAYER_ENABLE;
+
+	malidp_hw_setbits(mp->hwdev, val,
+			  mp->layer->base + MALIDP_LAYER_CONTROL);
+}
+
+static void malidp_de_plane_disable(struct drm_plane *plane,
+				    struct drm_plane_state *state)
+{
+	struct malidp_plane *mp = to_malidp_plane(plane);
+
+	malidp_hw_clearbits(mp->hwdev, LAYER_ENABLE,
+			    mp->layer->base + MALIDP_LAYER_CONTROL);
+}
+
+static const struct drm_plane_helper_funcs malidp_de_plane_helper_funcs = {
+	.atomic_check = malidp_de_plane_check,
+	.atomic_update = malidp_de_plane_update,
+	.atomic_disable = malidp_de_plane_disable,
+};
+
+int malidp_de_planes_init(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	const struct malidp_hw_regmap *map = &malidp->dev->map;
+	struct malidp_plane *plane = NULL;
+	enum drm_plane_type plane_type;
+	unsigned long crtcs = 1 << drm->mode_config.num_crtc;
+	u32 *formats;
+	int ret, i, j, n;
+
+	formats = kcalloc(map->n_input_formats, sizeof(*formats), GFP_KERNEL);
+	if (!formats) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	for (i = 0; i < map->n_layers; i++) {
+		u8 id = map->layers[i].id;
+
+		plane = kzalloc(sizeof(*plane), GFP_KERNEL);
+		if (!plane) {
+			ret = -ENOMEM;
+			goto cleanup;
+		}
+
+		/* build the list of DRM supported formats based on the map */
+		for (n = 0, j = 0;  j < map->n_input_formats; j++) {
+			if ((map->input_formats[j].layer & id) == id)
+				formats[n++] = map->input_formats[j].format;
+		}
+
+		plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
+					DRM_PLANE_TYPE_OVERLAY;
+		ret = drm_universal_plane_init(drm, &plane->base, crtcs,
+					       &malidp_de_plane_funcs, formats,
+					       n, plane_type, NULL);
+		if (ret < 0)
+			goto cleanup;
+
+		if (!drm->mode_config.rotation_property) {
+			unsigned long flags = BIT(DRM_ROTATE_0) |
+					      BIT(DRM_ROTATE_90) |
+					      BIT(DRM_ROTATE_180) |
+					      BIT(DRM_ROTATE_270) |
+					      BIT(DRM_REFLECT_X) |
+					      BIT(DRM_REFLECT_Y);
+			drm->mode_config.rotation_property =
+				drm_mode_create_rotation_property(drm, flags);
+		}
+		/* SMART layer can't be rotated */
+		if (drm->mode_config.rotation_property && (id != DE_SMART))
+			drm_object_attach_property(&plane->base.base,
+						   drm->mode_config.rotation_property,
+						   BIT(DRM_ROTATE_0));
+
+		drm_plane_helper_add(&plane->base,
+				     &malidp_de_plane_helper_funcs);
+		plane->hwdev = malidp->dev;
+		plane->layer = &map->layers[i];
+	}
+
+	kfree(formats);
+
+	return 0;
+
+cleanup:
+	malidp_de_planes_destroy(drm);
+	kfree(formats);
+
+	return ret;
+}
+
+void malidp_de_planes_destroy(struct drm_device *drm)
+{
+	struct drm_plane *p, *pt;
+
+	list_for_each_entry_safe(p, pt, &drm->mode_config.plane_list, head) {
+		drm_plane_cleanup(p);
+		kfree(p);
+	}
+}
diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
new file mode 100644
index 000000000000..73fecb38f955
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_regs.h
@@ -0,0 +1,172 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 registers definition.
+ */
+
+#ifndef __MALIDP_REGS_H__
+#define __MALIDP_REGS_H__
+
+/*
+ * abbreviations used:
+ *    - DC - display core (general settings)
+ *    - DE - display engine
+ *    - SE - scaling engine
+ */
+
+/* interrupt bit masks */
+#define MALIDP_DE_IRQ_UNDERRUN			(1 << 0)
+
+#define MALIDP500_DE_IRQ_AXI_ERR		(1 << 4)
+#define MALIDP500_DE_IRQ_VSYNC			(1 << 5)
+#define MALIDP500_DE_IRQ_PROG_LINE		(1 << 6)
+#define MALIDP500_DE_IRQ_SATURATION		(1 << 7)
+#define MALIDP500_DE_IRQ_CONF_VALID		(1 << 8)
+#define MALIDP500_DE_IRQ_CONF_MODE		(1 << 11)
+#define MALIDP500_DE_IRQ_CONF_ACTIVE		(1 << 17)
+#define MALIDP500_DE_IRQ_PM_ACTIVE		(1 << 18)
+#define MALIDP500_DE_IRQ_TESTMODE_ACTIVE	(1 << 19)
+#define MALIDP500_DE_IRQ_FORCE_BLNK_ACTIVE	(1 << 24)
+#define MALIDP500_DE_IRQ_AXI_BUSY		(1 << 28)
+#define MALIDP500_DE_IRQ_GLOBAL			(1 << 31)
+#define MALIDP500_SE_IRQ_CONF_MODE		(1 << 0)
+#define MALIDP500_SE_IRQ_CONF_VALID		(1 << 4)
+#define MALIDP500_SE_IRQ_INIT_BUSY		(1 << 5)
+#define MALIDP500_SE_IRQ_AXI_ERROR		(1 << 8)
+#define MALIDP500_SE_IRQ_OVERRUN		(1 << 9)
+#define MALIDP500_SE_IRQ_PROG_LINE1		(1 << 12)
+#define MALIDP500_SE_IRQ_PROG_LINE2		(1 << 13)
+#define MALIDP500_SE_IRQ_CONF_ACTIVE		(1 << 17)
+#define MALIDP500_SE_IRQ_PM_ACTIVE		(1 << 18)
+#define MALIDP500_SE_IRQ_AXI_BUSY		(1 << 28)
+#define MALIDP500_SE_IRQ_GLOBAL			(1 << 31)
+
+#define MALIDP550_DE_IRQ_SATURATION		(1 << 8)
+#define MALIDP550_DE_IRQ_VSYNC			(1 << 12)
+#define MALIDP550_DE_IRQ_PROG_LINE		(1 << 13)
+#define MALIDP550_DE_IRQ_AXI_ERR		(1 << 16)
+#define MALIDP550_SE_IRQ_EOW			(1 << 0)
+#define MALIDP550_SE_IRQ_AXI_ERR		(1 << 16)
+#define MALIDP550_DC_IRQ_CONF_VALID		(1 << 0)
+#define MALIDP550_DC_IRQ_CONF_MODE		(1 << 4)
+#define MALIDP550_DC_IRQ_CONF_ACTIVE		(1 << 16)
+#define MALIDP550_DC_IRQ_DE			(1 << 20)
+#define MALIDP550_DC_IRQ_SE			(1 << 24)
+
+#define MALIDP650_DE_IRQ_DRIFT			(1 << 4)
+
+/* bit masks that are common between products */
+#define   MALIDP_CFG_VALID		(1 << 0)
+#define   MALIDP_DISP_FUNC_ILACED	(1 << 8)
+
+/* register offsets for IRQ management */
+#define MALIDP_REG_STATUS		0x00000
+#define MALIDP_REG_SETIRQ		0x00004
+#define MALIDP_REG_MASKIRQ		0x00008
+#define MALIDP_REG_CLEARIRQ		0x0000c
+
+/* register offsets */
+#define MALIDP_DE_CORE_ID		0x00018
+#define MALIDP_DE_DISPLAY_FUNC		0x00020
+
+/* these offsets are relative to MALIDP5x0_TIMINGS_BASE */
+#define MALIDP_DE_H_TIMINGS		0x0
+#define MALIDP_DE_V_TIMINGS		0x4
+#define MALIDP_DE_SYNC_WIDTH		0x8
+#define MALIDP_DE_HV_ACTIVE		0xc
+
+/* macros to set values into registers */
+#define MALIDP_DE_H_FRONTPORCH(x)	(((x) & 0xfff) << 0)
+#define MALIDP_DE_H_BACKPORCH(x)	(((x) & 0x3ff) << 16)
+#define MALIDP500_DE_V_FRONTPORCH(x)	(((x) & 0xff) << 0)
+#define MALIDP550_DE_V_FRONTPORCH(x)	(((x) & 0xfff) << 0)
+#define MALIDP_DE_V_BACKPORCH(x)	(((x) & 0xff) << 16)
+#define MALIDP_DE_H_SYNCWIDTH(x)	(((x) & 0x3ff) << 0)
+#define MALIDP_DE_V_SYNCWIDTH(x)	(((x) & 0xff) << 16)
+#define MALIDP_DE_H_ACTIVE(x)		(((x) & 0x1fff) << 0)
+#define MALIDP_DE_V_ACTIVE(x)		(((x) & 0x1fff) << 16)
+
+/* register offsets and bits specific to DP500 */
+#define MALIDP500_DC_BASE		0x00000
+#define MALIDP500_DC_CONTROL		0x0000c
+#define   MALIDP500_DC_CONFIG_REQ	(1 << 17)
+#define   MALIDP500_HSYNCPOL		(1 << 20)
+#define   MALIDP500_VSYNCPOL		(1 << 21)
+#define   MALIDP500_DC_CLEAR_MASK	0x300fff
+#define MALIDP500_DE_LINE_COUNTER	0x00010
+#define MALIDP500_DE_AXI_CONTROL	0x00014
+#define MALIDP500_DE_SECURE_CTRL	0x0001c
+#define MALIDP500_DE_CHROMA_KEY		0x00024
+#define MALIDP500_TIMINGS_BASE		0x00028
+
+#define MALIDP500_CONFIG_3D		0x00038
+#define MALIDP500_BGND_COLOR		0x0003c
+#define MALIDP500_OUTPUT_DEPTH		0x00044
+#define MALIDP500_YUV_RGB_COEF		0x00048
+#define MALIDP500_COLOR_ADJ_COEF	0x00078
+#define MALIDP500_COEF_TABLE_ADDR	0x000a8
+#define MALIDP500_COEF_TABLE_DATA	0x000ac
+#define MALIDP500_DE_LV_BASE		0x00100
+#define MALIDP500_DE_LV_PTR_BASE	0x00124
+#define MALIDP500_DE_LG1_BASE		0x00200
+#define MALIDP500_DE_LG1_PTR_BASE	0x0021c
+#define MALIDP500_DE_LG2_BASE		0x00300
+#define MALIDP500_DE_LG2_PTR_BASE	0x0031c
+#define MALIDP500_SE_BASE		0x00c00
+#define MALIDP500_SE_PTR_BASE		0x00e0c
+#define MALIDP500_DC_IRQ_BASE		0x00f00
+#define MALIDP500_CONFIG_VALID		0x00f00
+#define MALIDP500_CONFIG_ID		0x00fd4
+
+/* register offsets and bits specific to DP550/DP650 */
+#define MALIDP550_DE_CONTROL		0x00010
+#define MALIDP550_DE_LINE_COUNTER	0x00014
+#define MALIDP550_DE_AXI_CONTROL	0x00018
+#define MALIDP550_DE_QOS		0x0001c
+#define MALIDP550_TIMINGS_BASE		0x00030
+#define MALIDP550_HSYNCPOL		(1 << 12)
+#define MALIDP550_VSYNCPOL		(1 << 28)
+
+#define MALIDP550_DE_DISP_SIDEBAND	0x00040
+#define MALIDP550_DE_BGND_COLOR		0x00044
+#define MALIDP550_DE_OUTPUT_DEPTH	0x0004c
+#define MALIDP550_DE_COLOR_COEF		0x00050
+#define MALIDP550_DE_COEF_TABLE_ADDR	0x00080
+#define MALIDP550_DE_COEF_TABLE_DATA	0x00084
+#define MALIDP550_DE_LV1_BASE		0x00100
+#define MALIDP550_DE_LV1_PTR_BASE	0x00124
+#define MALIDP550_DE_LV2_BASE		0x00200
+#define MALIDP550_DE_LV2_PTR_BASE	0x00224
+#define MALIDP550_DE_LG_BASE		0x00300
+#define MALIDP550_DE_LG_PTR_BASE	0x0031c
+#define MALIDP550_DE_LS_BASE		0x00400
+#define MALIDP550_DE_LS_PTR_BASE	0x0042c
+#define MALIDP550_DE_PERF_BASE		0x00500
+#define MALIDP550_SE_BASE		0x08000
+#define MALIDP550_DC_BASE		0x0c000
+#define MALIDP550_DC_CONTROL		0x0c010
+#define   MALIDP550_DC_CONFIG_REQ	(1 << 16)
+#define MALIDP550_CONFIG_VALID		0x0c014
+#define MALIDP550_CONFIG_ID		0x0ffd4
+
+/*
+ * Starting with DP550 the register map blocks has been standardised to the
+ * following layout:
+ *
+ *   Offset            Block registers
+ *  0x00000            Display Engine
+ *  0x08000            Scaling Engine
+ *  0x0c000            Display Core
+ *  0x10000            Secure control
+ *
+ * The old DP500 IP mixes some DC with the DE registers, hence the need
+ * for a mapping structure.
+ */
+
+#endif /* __MALIDP_REGS_H__ */