linux_dsm_epyc7002/drivers/hid/i2c-hid/i2c-hid.c

1296 lines
31 KiB
C
Raw Normal View History

/*
* HID over I2C protocol implementation
*
* Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
* Copyright (c) 2012 Red Hat, Inc
*
* This code is partly based on "USB HID support for Linux":
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
* Copyright (c) 2006-2010 Jiri Kosina
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/hid.h>
#include <linux/mutex.h>
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <linux/i2c/i2c-hid.h>
#include "../hid-ids.h"
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
/* flags */
#define I2C_HID_STARTED 0
#define I2C_HID_RESET_PENDING 1
#define I2C_HID_READ_PENDING 2
#define I2C_HID_PWR_ON 0x00
#define I2C_HID_PWR_SLEEP 0x01
/* debug option */
static bool debug;
module_param(debug, bool, 0444);
MODULE_PARM_DESC(debug, "print a lot of debug information");
#define i2c_hid_dbg(ihid, fmt, arg...) \
do { \
if (debug) \
dev_printk(KERN_DEBUG, &(ihid)->client->dev, fmt, ##arg); \
} while (0)
struct i2c_hid_desc {
__le16 wHIDDescLength;
__le16 bcdVersion;
__le16 wReportDescLength;
__le16 wReportDescRegister;
__le16 wInputRegister;
__le16 wMaxInputLength;
__le16 wOutputRegister;
__le16 wMaxOutputLength;
__le16 wCommandRegister;
__le16 wDataRegister;
__le16 wVendorID;
__le16 wProductID;
__le16 wVersionID;
__le32 reserved;
} __packed;
struct i2c_hid_cmd {
unsigned int registerIndex;
__u8 opcode;
unsigned int length;
bool wait;
};
union command {
u8 data[0];
struct cmd {
__le16 reg;
__u8 reportTypeID;
__u8 opcode;
} __packed c;
};
#define I2C_HID_CMD(opcode_) \
.opcode = opcode_, .length = 4, \
.registerIndex = offsetof(struct i2c_hid_desc, wCommandRegister)
/* fetch HID descriptor */
static const struct i2c_hid_cmd hid_descr_cmd = { .length = 2 };
/* fetch report descriptors */
static const struct i2c_hid_cmd hid_report_descr_cmd = {
.registerIndex = offsetof(struct i2c_hid_desc,
wReportDescRegister),
.opcode = 0x00,
.length = 2 };
/* commands */
static const struct i2c_hid_cmd hid_reset_cmd = { I2C_HID_CMD(0x01),
.wait = true };
static const struct i2c_hid_cmd hid_get_report_cmd = { I2C_HID_CMD(0x02) };
static const struct i2c_hid_cmd hid_set_report_cmd = { I2C_HID_CMD(0x03) };
static const struct i2c_hid_cmd hid_set_power_cmd = { I2C_HID_CMD(0x08) };
static const struct i2c_hid_cmd hid_no_cmd = { .length = 0 };
/*
* These definitions are not used here, but are defined by the spec.
* Keeping them here for documentation purposes.
*
* static const struct i2c_hid_cmd hid_get_idle_cmd = { I2C_HID_CMD(0x04) };
* static const struct i2c_hid_cmd hid_set_idle_cmd = { I2C_HID_CMD(0x05) };
* static const struct i2c_hid_cmd hid_get_protocol_cmd = { I2C_HID_CMD(0x06) };
* static const struct i2c_hid_cmd hid_set_protocol_cmd = { I2C_HID_CMD(0x07) };
*/
static DEFINE_MUTEX(i2c_hid_open_mut);
/* The main device structure */
struct i2c_hid {
struct i2c_client *client; /* i2c client */
struct hid_device *hid; /* pointer to corresponding HID dev */
union {
__u8 hdesc_buffer[sizeof(struct i2c_hid_desc)];
struct i2c_hid_desc hdesc; /* the HID Descriptor */
};
__le16 wHIDDescRegister; /* location of the i2c
* register of the HID
* descriptor. */
unsigned int bufsize; /* i2c buffer size */
char *inbuf; /* Input buffer */
char *rawbuf; /* Raw Input buffer */
char *cmdbuf; /* Command buffer */
char *argsbuf; /* Command arguments buffer */
unsigned long flags; /* device flags */
unsigned long quirks; /* Various quirks */
wait_queue_head_t wait; /* For waiting the interrupt */
struct i2c_hid_platform_data pdata;
bool irq_wake_enabled;
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
struct mutex reset_lock;
};
static const struct i2c_hid_quirks {
__u16 idVendor;
__u16 idProduct;
__u32 quirks;
} i2c_hid_quirks[] = {
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8752,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ 0, 0 }
};
/*
* i2c_hid_lookup_quirk: return any quirks associated with a I2C HID device
* @idVendor: the 16-bit vendor ID
* @idProduct: the 16-bit product ID
*
* Returns: a u32 quirks value.
*/
static u32 i2c_hid_lookup_quirk(const u16 idVendor, const u16 idProduct)
{
u32 quirks = 0;
int n;
for (n = 0; i2c_hid_quirks[n].idVendor; n++)
if (i2c_hid_quirks[n].idVendor == idVendor &&
(i2c_hid_quirks[n].idProduct == (__u16)HID_ANY_ID ||
i2c_hid_quirks[n].idProduct == idProduct))
quirks = i2c_hid_quirks[n].quirks;
return quirks;
}
static int __i2c_hid_command(struct i2c_client *client,
const struct i2c_hid_cmd *command, u8 reportID,
u8 reportType, u8 *args, int args_len,
unsigned char *buf_recv, int data_len)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
union command *cmd = (union command *)ihid->cmdbuf;
int ret;
struct i2c_msg msg[2];
int msg_num = 1;
int length = command->length;
bool wait = command->wait;
unsigned int registerIndex = command->registerIndex;
/* special case for hid_descr_cmd */
if (command == &hid_descr_cmd) {
cmd->c.reg = ihid->wHIDDescRegister;
} else {
cmd->data[0] = ihid->hdesc_buffer[registerIndex];
cmd->data[1] = ihid->hdesc_buffer[registerIndex + 1];
}
if (length > 2) {
cmd->c.opcode = command->opcode;
cmd->c.reportTypeID = reportID | reportType << 4;
}
memcpy(cmd->data + length, args, args_len);
length += args_len;
i2c_hid_dbg(ihid, "%s: cmd=%*ph\n", __func__, length, cmd->data);
msg[0].addr = client->addr;
msg[0].flags = client->flags & I2C_M_TEN;
msg[0].len = length;
msg[0].buf = cmd->data;
if (data_len > 0) {
msg[1].addr = client->addr;
msg[1].flags = client->flags & I2C_M_TEN;
msg[1].flags |= I2C_M_RD;
msg[1].len = data_len;
msg[1].buf = buf_recv;
msg_num = 2;
set_bit(I2C_HID_READ_PENDING, &ihid->flags);
}
if (wait)
set_bit(I2C_HID_RESET_PENDING, &ihid->flags);
ret = i2c_transfer(client->adapter, msg, msg_num);
if (data_len > 0)
clear_bit(I2C_HID_READ_PENDING, &ihid->flags);
if (ret != msg_num)
return ret < 0 ? ret : -EIO;
ret = 0;
if (wait) {
i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
if (!wait_event_timeout(ihid->wait,
!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
msecs_to_jiffies(5000)))
ret = -ENODATA;
i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
}
return ret;
}
static int i2c_hid_command(struct i2c_client *client,
const struct i2c_hid_cmd *command,
unsigned char *buf_recv, int data_len)
{
return __i2c_hid_command(client, command, 0, 0, NULL, 0,
buf_recv, data_len);
}
static int i2c_hid_get_report(struct i2c_client *client, u8 reportType,
u8 reportID, unsigned char *buf_recv, int data_len)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
u8 args[3];
int ret;
int args_len = 0;
u16 readRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
i2c_hid_dbg(ihid, "%s\n", __func__);
if (reportID >= 0x0F) {
args[args_len++] = reportID;
reportID = 0x0F;
}
args[args_len++] = readRegister & 0xFF;
args[args_len++] = readRegister >> 8;
ret = __i2c_hid_command(client, &hid_get_report_cmd, reportID,
reportType, args, args_len, buf_recv, data_len);
if (ret) {
dev_err(&client->dev,
"failed to retrieve report from device.\n");
return ret;
}
return 0;
}
/**
* i2c_hid_set_or_send_report: forward an incoming report to the device
* @client: the i2c_client of the device
* @reportType: 0x03 for HID_FEATURE_REPORT ; 0x02 for HID_OUTPUT_REPORT
* @reportID: the report ID
* @buf: the actual data to transfer, without the report ID
* @len: size of buf
* @use_data: true: use SET_REPORT HID command, false: send plain OUTPUT report
*/
static int i2c_hid_set_or_send_report(struct i2c_client *client, u8 reportType,
u8 reportID, unsigned char *buf, size_t data_len, bool use_data)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
u8 *args = ihid->argsbuf;
const struct i2c_hid_cmd *hidcmd;
int ret;
u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report() Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Cc: stable@vger.kernel.org Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-15 05:21:04 +07:00
u16 size;
int args_len;
int index = 0;
i2c_hid_dbg(ihid, "%s\n", __func__);
if (data_len > ihid->bufsize)
return -EINVAL;
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report() Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Cc: stable@vger.kernel.org Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-15 05:21:04 +07:00
size = 2 /* size */ +
(reportID ? 1 : 0) /* reportID */ +
data_len /* buf */;
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report() Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Cc: stable@vger.kernel.org Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-15 05:21:04 +07:00
args_len = (reportID >= 0x0F ? 1 : 0) /* optional third byte */ +
2 /* dataRegister */ +
size /* args */;
if (!use_data && maxOutputLength == 0)
return -ENOSYS;
if (reportID >= 0x0F) {
args[index++] = reportID;
reportID = 0x0F;
}
/*
* use the data register for feature reports or if the device does not
* support the output register
*/
if (use_data) {
args[index++] = dataRegister & 0xFF;
args[index++] = dataRegister >> 8;
hidcmd = &hid_set_report_cmd;
} else {
args[index++] = outputRegister & 0xFF;
args[index++] = outputRegister >> 8;
hidcmd = &hid_no_cmd;
}
args[index++] = size & 0xFF;
args[index++] = size >> 8;
if (reportID)
args[index++] = reportID;
memcpy(&args[index], buf, data_len);
ret = __i2c_hid_command(client, hidcmd, reportID,
reportType, args, args_len, NULL, 0);
if (ret) {
dev_err(&client->dev, "failed to set a report to device.\n");
return ret;
}
return data_len;
}
static int i2c_hid_set_power(struct i2c_client *client, int power_state)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
i2c_hid_dbg(ihid, "%s\n", __func__);
/*
* Some devices require to send a command to wakeup before power on.
* The call will get a return value (EREMOTEIO) but device will be
* triggered and activated. After that, it goes like a normal device.
*/
if (power_state == I2C_HID_PWR_ON &&
ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
ret = i2c_hid_command(client, &hid_set_power_cmd, NULL, 0);
/* Device was already activated */
if (!ret)
goto set_pwr_exit;
}
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
set_pwr_exit:
return ret;
}
static int i2c_hid_hwreset(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
i2c_hid_dbg(ihid, "%s\n", __func__);
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
/*
* This prevents sending feature reports while the device is
* being reset. Otherwise we may lose the reset complete
* interrupt.
*/
mutex_lock(&ihid->reset_lock);
ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
if (ret)
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
goto out_unlock;
/*
* The HID over I2C specification states that if a DEVICE needs time
* after the PWR_ON request, it should utilise CLOCK stretching.
* However, it has been observered that the Windows driver provides a
* 1ms sleep between the PWR_ON and RESET requests and that some devices
* rely on this.
*/
usleep_range(1000, 5000);
i2c_hid_dbg(ihid, "resetting...\n");
ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);
if (ret) {
dev_err(&client->dev, "failed to reset device.\n");
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
}
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
out_unlock:
mutex_unlock(&ihid->reset_lock);
return ret;
}
static void i2c_hid_get_input(struct i2c_hid *ihid)
{
int ret, ret_size;
int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
if (size > ihid->bufsize)
size = ihid->bufsize;
ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
if (ret != size) {
if (ret < 0)
return;
dev_err(&ihid->client->dev, "%s: got %d data instead of %d\n",
__func__, ret, size);
return;
}
ret_size = ihid->inbuf[0] | ihid->inbuf[1] << 8;
if (!ret_size) {
/* host or device initiated RESET completed */
if (test_and_clear_bit(I2C_HID_RESET_PENDING, &ihid->flags))
wake_up(&ihid->wait);
return;
}
if (ret_size > size) {
dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
__func__, size, ret_size);
return;
}
i2c_hid_dbg(ihid, "input: %*ph\n", ret_size, ihid->inbuf);
if (test_bit(I2C_HID_STARTED, &ihid->flags))
hid_input_report(ihid->hid, HID_INPUT_REPORT, ihid->inbuf + 2,
ret_size - 2, 1);
return;
}
static irqreturn_t i2c_hid_irq(int irq, void *dev_id)
{
struct i2c_hid *ihid = dev_id;
if (test_bit(I2C_HID_READ_PENDING, &ihid->flags))
return IRQ_HANDLED;
i2c_hid_get_input(ihid);
return IRQ_HANDLED;
}
static int i2c_hid_get_report_length(struct hid_report *report)
{
return ((report->size - 1) >> 3) + 1 +
report->device->report_enum[report->type].numbered + 2;
}
static void i2c_hid_init_report(struct hid_report *report, u8 *buffer,
size_t bufsize)
{
struct hid_device *hid = report->device;
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
unsigned int size, ret_size;
size = i2c_hid_get_report_length(report);
if (i2c_hid_get_report(client,
report->type == HID_FEATURE_REPORT ? 0x03 : 0x01,
report->id, buffer, size))
return;
i2c_hid_dbg(ihid, "report (len=%d): %*ph\n", size, size, buffer);
ret_size = buffer[0] | (buffer[1] << 8);
if (ret_size != size) {
dev_err(&client->dev, "error in %s size:%d / ret_size:%d\n",
__func__, size, ret_size);
return;
}
/* hid->driver_lock is held as we are in probe function,
* we just need to setup the input fields, so using
* hid_report_raw_event is safe. */
hid_report_raw_event(hid, report->type, buffer + 2, size - 2, 1);
}
/*
* Initialize all reports
*/
static void i2c_hid_init_reports(struct hid_device *hid)
{
struct hid_report *report;
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
u8 *inbuf = kzalloc(ihid->bufsize, GFP_KERNEL);
if (!inbuf) {
dev_err(&client->dev, "can not retrieve initial reports\n");
return;
}
/*
* The device must be powered on while we fetch initial reports
* from it.
*/
pm_runtime_get_sync(&client->dev);
list_for_each_entry(report,
&hid->report_enum[HID_FEATURE_REPORT].report_list, list)
i2c_hid_init_report(report, inbuf, ihid->bufsize);
pm_runtime_put(&client->dev);
kfree(inbuf);
}
/*
* Traverse the supplied list of reports and find the longest
*/
static void i2c_hid_find_max_report(struct hid_device *hid, unsigned int type,
unsigned int *max)
{
struct hid_report *report;
unsigned int size;
/* We should not rely on wMaxInputLength, as some devices may set it to
* a wrong length. */
list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
size = i2c_hid_get_report_length(report);
if (*max < size)
*max = size;
}
}
static void i2c_hid_free_buffers(struct i2c_hid *ihid)
{
kfree(ihid->inbuf);
kfree(ihid->rawbuf);
kfree(ihid->argsbuf);
kfree(ihid->cmdbuf);
ihid->inbuf = NULL;
ihid->rawbuf = NULL;
ihid->cmdbuf = NULL;
ihid->argsbuf = NULL;
ihid->bufsize = 0;
}
static int i2c_hid_alloc_buffers(struct i2c_hid *ihid, size_t report_size)
{
/* the worst case is computed from the set_report command with a
* reportID > 15 and the maximum report length */
int args_len = sizeof(__u8) + /* optional ReportID byte */
sizeof(__u16) + /* data register */
sizeof(__u16) + /* size of the report */
report_size; /* report */
ihid->inbuf = kzalloc(report_size, GFP_KERNEL);
ihid->rawbuf = kzalloc(report_size, GFP_KERNEL);
ihid->argsbuf = kzalloc(args_len, GFP_KERNEL);
ihid->cmdbuf = kzalloc(sizeof(union command) + args_len, GFP_KERNEL);
if (!ihid->inbuf || !ihid->rawbuf || !ihid->argsbuf || !ihid->cmdbuf) {
i2c_hid_free_buffers(ihid);
return -ENOMEM;
}
ihid->bufsize = report_size;
return 0;
}
static int i2c_hid_get_raw_report(struct hid_device *hid,
unsigned char report_number, __u8 *buf, size_t count,
unsigned char report_type)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
size_t ret_count, ask_count;
int ret;
if (report_type == HID_OUTPUT_REPORT)
return -EINVAL;
/* +2 bytes to include the size of the reply in the query buffer */
ask_count = min(count + 2, (size_t)ihid->bufsize);
ret = i2c_hid_get_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x01,
report_number, ihid->rawbuf, ask_count);
if (ret < 0)
return ret;
ret_count = ihid->rawbuf[0] | (ihid->rawbuf[1] << 8);
if (ret_count <= 2)
return 0;
ret_count = min(ret_count, ask_count);
/* The query buffer contains the size, dropping it in the reply */
count = min(count, ret_count - 2);
memcpy(buf, ihid->rawbuf + 2, count);
return count;
}
static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
size_t count, unsigned char report_type, bool use_data)
{
struct i2c_client *client = hid->driver_data;
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
struct i2c_hid *ihid = i2c_get_clientdata(client);
int report_id = buf[0];
int ret;
if (report_type == HID_INPUT_REPORT)
return -EINVAL;
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
mutex_lock(&ihid->reset_lock);
if (report_id) {
buf++;
count--;
}
ret = i2c_hid_set_or_send_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
report_id, buf, count, use_data);
if (report_id && ret >= 0)
ret++; /* add report_id to the number of transfered bytes */
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
mutex_unlock(&ihid->reset_lock);
return ret;
}
static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
size_t count)
{
return i2c_hid_output_raw_report(hid, buf, count, HID_OUTPUT_REPORT,
false);
}
static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
{
switch (reqtype) {
case HID_REQ_GET_REPORT:
return i2c_hid_get_raw_report(hid, reportnum, buf, len, rtype);
case HID_REQ_SET_REPORT:
if (buf[0] != reportnum)
return -EINVAL;
return i2c_hid_output_raw_report(hid, buf, len, rtype, true);
default:
return -EIO;
}
}
static int i2c_hid_parse(struct hid_device *hid)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct i2c_hid_desc *hdesc = &ihid->hdesc;
unsigned int rsize;
char *rdesc;
int ret;
int tries = 3;
i2c_hid_dbg(ihid, "entering %s\n", __func__);
rsize = le16_to_cpu(hdesc->wReportDescLength);
if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
dbg_hid("weird size of report descriptor (%u)\n", rsize);
return -EINVAL;
}
do {
ret = i2c_hid_hwreset(client);
if (ret)
msleep(1000);
} while (tries-- > 0 && ret);
if (ret)
return ret;
rdesc = kzalloc(rsize, GFP_KERNEL);
if (!rdesc) {
dbg_hid("couldn't allocate rdesc memory\n");
return -ENOMEM;
}
i2c_hid_dbg(ihid, "asking HID report descriptor\n");
ret = i2c_hid_command(client, &hid_report_descr_cmd, rdesc, rsize);
if (ret) {
hid_err(hid, "reading report descriptor failed\n");
kfree(rdesc);
return -EIO;
}
i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);
ret = hid_parse_report(hid, rdesc, rsize);
kfree(rdesc);
if (ret) {
dbg_hid("parsing report descriptor failed\n");
return ret;
}
return 0;
}
static int i2c_hid_start(struct hid_device *hid)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
unsigned int bufsize = HID_MIN_BUFFER_SIZE;
i2c_hid_find_max_report(hid, HID_INPUT_REPORT, &bufsize);
i2c_hid_find_max_report(hid, HID_OUTPUT_REPORT, &bufsize);
i2c_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);
if (bufsize > ihid->bufsize) {
disable_irq(client->irq);
i2c_hid_free_buffers(ihid);
ret = i2c_hid_alloc_buffers(ihid, bufsize);
enable_irq(client->irq);
if (ret)
return ret;
}
if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
i2c_hid_init_reports(hid);
return 0;
}
static void i2c_hid_stop(struct hid_device *hid)
{
hid->claimed = 0;
}
static int i2c_hid_open(struct hid_device *hid)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret = 0;
mutex_lock(&i2c_hid_open_mut);
if (!hid->open++) {
ret = pm_runtime_get_sync(&client->dev);
if (ret < 0) {
hid->open--;
goto done;
}
set_bit(I2C_HID_STARTED, &ihid->flags);
}
done:
mutex_unlock(&i2c_hid_open_mut);
return ret < 0 ? ret : 0;
}
static void i2c_hid_close(struct hid_device *hid)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
/* protecting hid->open to make sure we don't restart
* data acquistion due to a resumption we no longer
* care about
*/
mutex_lock(&i2c_hid_open_mut);
if (!--hid->open) {
clear_bit(I2C_HID_STARTED, &ihid->flags);
/* Save some power */
pm_runtime_put(&client->dev);
}
mutex_unlock(&i2c_hid_open_mut);
}
static int i2c_hid_power(struct hid_device *hid, int lvl)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
switch (lvl) {
case PM_HINT_FULLON:
pm_runtime_get_sync(&client->dev);
break;
case PM_HINT_NORMAL:
pm_runtime_put(&client->dev);
break;
}
return 0;
}
static struct hid_ll_driver i2c_hid_ll_driver = {
.parse = i2c_hid_parse,
.start = i2c_hid_start,
.stop = i2c_hid_stop,
.open = i2c_hid_open,
.close = i2c_hid_close,
.power = i2c_hid_power,
.output_report = i2c_hid_output_report,
.raw_request = i2c_hid_raw_request,
};
static int i2c_hid_init_irq(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
unsigned long irqflags = 0;
int ret;
dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
if (!irq_get_trigger_type(client->irq))
irqflags = IRQF_TRIGGER_LOW;
ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
irqflags | IRQF_ONESHOT, client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
"Could not register for %s interrupt, irq = %d,"
" ret = %d\n",
client->name, client->irq, ret);
return ret;
}
return 0;
}
static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
{
struct i2c_client *client = ihid->client;
struct i2c_hid_desc *hdesc = &ihid->hdesc;
unsigned int dsize;
int ret;
/* i2c hid fetch using a fixed descriptor size (30 bytes) */
i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer,
sizeof(struct i2c_hid_desc));
if (ret) {
dev_err(&client->dev, "hid_descr_cmd failed\n");
return -ENODEV;
}
/* Validate the length of HID descriptor, the 4 first bytes:
* bytes 0-1 -> length
* bytes 2-3 -> bcdVersion (has to be 1.00) */
/* check bcdVersion == 1.0 */
if (le16_to_cpu(hdesc->bcdVersion) != 0x0100) {
dev_err(&client->dev,
"unexpected HID descriptor bcdVersion (0x%04hx)\n",
le16_to_cpu(hdesc->bcdVersion));
return -ENODEV;
}
/* Descriptor length should be 30 bytes as per the specification */
dsize = le16_to_cpu(hdesc->wHIDDescLength);
if (dsize != sizeof(struct i2c_hid_desc)) {
dev_err(&client->dev, "weird size of HID descriptor (%u)\n",
dsize);
return -ENODEV;
}
i2c_hid_dbg(ihid, "HID Descriptor: %*ph\n", dsize, ihid->hdesc_buffer);
return 0;
}
#ifdef CONFIG_ACPI
static int i2c_hid_acpi_pdata(struct i2c_client *client,
struct i2c_hid_platform_data *pdata)
{
static u8 i2c_hid_guid[] = {
0xF7, 0xF6, 0xDF, 0x3C, 0x67, 0x42, 0x55, 0x45,
0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE,
};
union acpi_object *obj;
struct acpi_device *adev;
acpi_handle handle;
handle = ACPI_HANDLE(&client->dev);
if (!handle || acpi_bus_get_device(handle, &adev))
return -ENODEV;
obj = acpi_evaluate_dsm_typed(handle, i2c_hid_guid, 1, 1, NULL,
ACPI_TYPE_INTEGER);
if (!obj) {
dev_err(&client->dev, "device _DSM execution failed\n");
return -ENODEV;
}
pdata->hid_descriptor_address = obj->integer.value;
ACPI_FREE(obj);
return 0;
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
{"ACPI0C50", 0 },
{"PNP0C50", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, i2c_hid_acpi_match);
#else
static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
struct i2c_hid_platform_data *pdata)
{
return -ENODEV;
}
#endif
#ifdef CONFIG_OF
static int i2c_hid_of_probe(struct i2c_client *client,
struct i2c_hid_platform_data *pdata)
{
struct device *dev = &client->dev;
u32 val;
int ret;
ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val);
if (ret) {
dev_err(&client->dev, "HID register address not provided\n");
return -ENODEV;
}
if (val >> 16) {
dev_err(&client->dev, "Bad HID register address: 0x%08x\n",
val);
return -EINVAL;
}
pdata->hid_descriptor_address = val;
return 0;
}
static const struct of_device_id i2c_hid_of_match[] = {
{ .compatible = "hid-over-i2c" },
{},
};
MODULE_DEVICE_TABLE(of, i2c_hid_of_match);
#else
static inline int i2c_hid_of_probe(struct i2c_client *client,
struct i2c_hid_platform_data *pdata)
{
return -ENODEV;
}
#endif
static int i2c_hid_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret;
struct i2c_hid *ihid;
struct hid_device *hid;
__u16 hidRegister;
struct i2c_hid_platform_data *platform_data = client->dev.platform_data;
dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);
if (!client->irq) {
dev_err(&client->dev,
"HID over i2c has not been provided an Int IRQ\n");
return -EINVAL;
}
if (client->irq < 0) {
if (client->irq != -EPROBE_DEFER)
dev_err(&client->dev,
"HID over i2c doesn't have a valid IRQ\n");
return client->irq;
}
ihid = kzalloc(sizeof(struct i2c_hid), GFP_KERNEL);
if (!ihid)
return -ENOMEM;
if (client->dev.of_node) {
ret = i2c_hid_of_probe(client, &ihid->pdata);
if (ret)
goto err;
} else if (!platform_data) {
ret = i2c_hid_acpi_pdata(client, &ihid->pdata);
if (ret) {
dev_err(&client->dev,
"HID register address not provided\n");
goto err;
}
} else {
ihid->pdata = *platform_data;
}
i2c_set_clientdata(client, ihid);
ihid->client = client;
hidRegister = ihid->pdata.hid_descriptor_address;
ihid->wHIDDescRegister = cpu_to_le16(hidRegister);
init_waitqueue_head(&ihid->wait);
HID: i2c-hid: Prevent sending reports from racing with device reset When an i2c-hid device is resumed from system sleep the driver resets the device to be sure it is in known state. The device is expected to issue an interrupt when reset is complete. This reset might take few milliseconds to complete so if the HID driver on top (hid-rmi) starts to set up the device by sending feature reports etc. the device might not issue the reset complete interrupt anymore. Below is what happens to touchpad on Lenovo Yoga 900 during resume from system sleep: [ 24.790951] i2c_hid i2c-SYNA2B29:00: i2c_hid_hwreset [ 24.790973] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 24.790982] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 08 [ 24.793011] i2c_hid i2c-SYNA2B29:00: resetting... [ 24.793016] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 00 01 Here i2c-hid sends reset command to the touchpad. [ 24.794012] i2c_hid i2c-SYNA2B29:00: input: 06 00 01 00 00 00 [ 24.794051] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.794059] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 3f 03 0f 23 00 04 00 0f 01 Now hid-rmi puts the touchpad to correct mode by sending it a feature report. This makes the touchpad not to issue reset complete interrupt. [ 24.796092] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: waiting... i2c-hid starts to wait for the reset interrupt to trigger which never happens. [ 24.798304] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_or_send_report [ 24.798313] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=25 00 17 00 09 01 42 00 2e 00 19 19 00 10 cc 06 74 04 0f 19 00 00 00 00 00 Yet another output report from hid-rmi driver. [ 29.795630] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: finished. [ 29.795637] i2c_hid i2c-SYNA2B29:00: failed to reset device. After 5 seconds i2c-hid driver times out. [ 29.795642] i2c_hid i2c-SYNA2B29:00: i2c_hid_set_power [ 29.795649] i2c_hid i2c-SYNA2B29:00: __i2c_hid_command: cmd=22 00 01 08 [ 29.797576] dpm_run_callback(): i2c_hid_resume+0x0/0xb0 returns -61 [ 29.797584] PM: Device i2c-SYNA2B29:00 failed to resume: error -61 After this the touchpad does not work anymore (and also resume itself gets slowed down because of the timeout). Prevent sending of feature/output reports while the device is being reset by adding a mutex which is held during that time. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Nish Aravamudan <nish.aravamudan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-21 20:26:31 +07:00
mutex_init(&ihid->reset_lock);
/* we need to allocate the command buffer without knowing the maximum
* size of the reports. Let's use HID_MIN_BUFFER_SIZE, then we do the
* real computation later. */
ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
if (ret < 0)
goto err;
pm_runtime_get_noresume(&client->dev);
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
device_enable_async_suspend(&client->dev);
ret = i2c_hid_fetch_hid_descriptor(ihid);
if (ret < 0)
goto err_pm;
ret = i2c_hid_init_irq(client);
if (ret < 0)
goto err_pm;
hid = hid_allocate_device();
if (IS_ERR(hid)) {
ret = PTR_ERR(hid);
goto err_irq;
}
ihid->hid = hid;
hid->driver_data = client;
hid->ll_driver = &i2c_hid_ll_driver;
hid->dev.parent = &client->dev;
hid->bus = BUS_I2C;
hid->version = le16_to_cpu(ihid->hdesc.bcdVersion);
hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID);
hid->product = le16_to_cpu(ihid->hdesc.wProductID);
snprintf(hid->name, sizeof(hid->name), "%s %04hX:%04hX",
client->name, hid->vendor, hid->product);
strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
hid_err(client, "can't add hid device: %d\n", ret);
goto err_mem_free;
}
pm_runtime_put(&client->dev);
return 0;
err_mem_free:
hid_destroy_device(hid);
err_irq:
free_irq(client->irq, ihid);
err_pm:
pm_runtime_put_noidle(&client->dev);
pm_runtime_disable(&client->dev);
err:
i2c_hid_free_buffers(ihid);
kfree(ihid);
return ret;
}
static int i2c_hid_remove(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
pm_runtime_get_sync(&client->dev);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
pm_runtime_put_noidle(&client->dev);
hid = ihid->hid;
hid_destroy_device(hid);
free_irq(client->irq, ihid);
if (ihid->bufsize)
i2c_hid_free_buffers(ihid);
kfree(ihid);
return 0;
}
static void i2c_hid_shutdown(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
free_irq(client->irq, ihid);
}
#ifdef CONFIG_PM_SLEEP
static int i2c_hid_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid = ihid->hid;
2016-03-09 06:03:23 +07:00
int ret;
int wake_status;
2016-03-09 06:03:23 +07:00
if (hid->driver && hid->driver->suspend) {
/*
* Wake up the device so that IO issues in
* HID driver's suspend code can succeed.
*/
ret = pm_runtime_resume(dev);
if (ret < 0)
return ret;
ret = hid->driver->suspend(hid, PMSG_SUSPEND);
2016-03-09 06:03:23 +07:00
if (ret < 0)
return ret;
}
if (!pm_runtime_suspended(dev)) {
/* Save some power */
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
disable_irq(client->irq);
2016-03-09 06:03:23 +07:00
}
if (device_may_wakeup(&client->dev)) {
wake_status = enable_irq_wake(client->irq);
if (!wake_status)
ihid->irq_wake_enabled = true;
else
hid_warn(hid, "Failed to enable irq wake: %d\n",
wake_status);
}
2016-03-09 06:03:23 +07:00
return 0;
}
static int i2c_hid_resume(struct device *dev)
{
int ret;
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid = ihid->hid;
int wake_status;
if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
wake_status = disable_irq_wake(client->irq);
if (!wake_status)
ihid->irq_wake_enabled = false;
else
hid_warn(hid, "Failed to disable irq wake: %d\n",
wake_status);
}
2016-03-09 06:03:23 +07:00
/* We'll resume to full power */
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
enable_irq(client->irq);
2016-03-09 06:03:23 +07:00
ret = i2c_hid_hwreset(client);
if (ret)
return ret;
if (hid->driver && hid->driver->reset_resume) {
ret = hid->driver->reset_resume(hid);
return ret;
}
return 0;
}
#endif
#ifdef CONFIG_PM
static int i2c_hid_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
disable_irq(client->irq);
return 0;
}
static int i2c_hid_runtime_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
enable_irq(client->irq);
i2c_hid_set_power(client, I2C_HID_PWR_ON);
return 0;
}
#endif
static const struct dev_pm_ops i2c_hid_pm = {
SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume)
SET_RUNTIME_PM_OPS(i2c_hid_runtime_suspend, i2c_hid_runtime_resume,
NULL)
};
static const struct i2c_device_id i2c_hid_id_table[] = {
{ "hid", 0 },
{ "hid-over-i2c", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, i2c_hid_id_table);
static struct i2c_driver i2c_hid_driver = {
.driver = {
.name = "i2c_hid",
.pm = &i2c_hid_pm,
.acpi_match_table = ACPI_PTR(i2c_hid_acpi_match),
.of_match_table = of_match_ptr(i2c_hid_of_match),
},
.probe = i2c_hid_probe,
.remove = i2c_hid_remove,
.shutdown = i2c_hid_shutdown,
.id_table = i2c_hid_id_table,
};
module_i2c_driver(i2c_hid_driver);
MODULE_DESCRIPTION("HID over I2C core driver");
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
MODULE_LICENSE("GPL");