linux_dsm_epyc7002/arch/x86/kernel/cpu/intel_rdt.c

820 lines
20 KiB
C
Raw Normal View History

/*
* Resource Director Technology(RDT)
* - Cache Allocation code.
*
* Copyright (C) 2016 Intel Corporation
*
* Authors:
* Fenghua Yu <fenghua.yu@intel.com>
* Tony Luck <tony.luck@intel.com>
* Vikas Shivappa <vikas.shivappa@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* More information about RDT be found in the Intel (R) x86 Architecture
* Software Developer Manual June 2016, volume 3, section 17.17.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/cacheinfo.h>
#include <linux/cpuhotplug.h>
#include <asm/intel-family.h>
#include <asm/intel_rdt_sched.h>
#include "intel_rdt.h"
#define MAX_MBA_BW 100u
#define MBA_IS_LINEAR 0x4
/* Mutex to protect rdtgroup access. */
DEFINE_MUTEX(rdtgroup_mutex);
x86/perf/cqm: Wipe out perf based cqm 'perf cqm' never worked due to the incompatibility between perf infrastructure and cqm hardware support. The hardware uses RMIDs to track the llc occupancy of tasks and these RMIDs are per package. This makes monitoring a hierarchy like cgroup along with monitoring of tasks separately difficult and several patches sent to lkml to fix them were NACKed. Further more, the following issues in the current perf cqm make it almost unusable: 1. No support to monitor the same group of tasks for which we do allocation using resctrl. 2. It gives random and inaccurate data (mostly 0s) once we run out of RMIDs due to issues in Recycling. 3. Recycling results in inaccuracy of data because we cannot guarantee that the RMID was stolen from a task when it was not pulling data into cache or even when it pulled the least data. Also for monitoring llc_occupancy, if we stop using an RMID_x and then start using an RMID_y after we reclaim an RMID from an other event, we miss accounting all the occupancy that was tagged to RMID_x at a later perf_count. 2. Recycling code makes the monitoring code complex including scheduling because the event can lose RMID any time. Since MBM counters count bandwidth for a period of time by taking snap shot of total bytes at two different times, recycling complicates the way we count MBM in a hierarchy. Also we need a spin lock while we do the processing to account for MBM counter overflow. We also currently use a spin lock in scheduling to prevent the RMID from being taken away. 4. Lack of support when we run different kind of event like task, system-wide and cgroup events together. Data mostly prints 0s. This is also because we can have only one RMID tied to a cpu as defined by the cqm hardware but a perf can at the same time tie multiple events during one sched_in. 5. No support of monitoring a group of tasks. There is partial support for cgroup but it does not work once there is a hierarchy of cgroups or if we want to monitor a task in a cgroup and the cgroup itself. 6. No support for monitoring tasks for the lifetime without perf overhead. 7. It reported the aggregate cache occupancy or memory bandwidth over all sockets. But most cloud and VMM based use cases want to know the individual per-socket usage. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: vikas.shivappa@intel.com Cc: ak@linux.intel.com Cc: davidcc@google.com Cc: reinette.chatre@intel.com Link: http://lkml.kernel.org/r/1501017287-28083-2-git-send-email-vikas.shivappa@linux.intel.com
2017-07-26 04:14:20 +07:00
/*
* The cached intel_pqr_state is strictly per CPU and can never be
* updated from a remote CPU. Functions which modify the state
* are called with interrupts disabled and no preemption, which
* is sufficient for the protection.
*/
DEFINE_PER_CPU(struct intel_pqr_state, pqr_state);
/*
* Used to store the max resource name width and max resource data width
* to display the schemata in a tabular format
*/
int max_name_width, max_data_width;
/*
* Global boolean for rdt_alloc which is true if any
* resource allocation is enabled.
*/
bool rdt_alloc_capable;
static void
mba_wrmsr(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r);
static void
cat_wrmsr(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r);
#define domain_init(id) LIST_HEAD_INIT(rdt_resources_all[id].domains)
struct rdt_resource rdt_resources_all[] = {
[RDT_RESOURCE_L3] =
{
.rid = RDT_RESOURCE_L3,
.name = "L3",
.domains = domain_init(RDT_RESOURCE_L3),
.msr_base = IA32_L3_CBM_BASE,
.msr_update = cat_wrmsr,
.cache_level = 3,
.cache = {
.min_cbm_bits = 1,
.cbm_idx_mult = 1,
.cbm_idx_offset = 0,
},
.parse_ctrlval = parse_cbm,
.format_str = "%d=%0*x",
.fflags = RFTYPE_RES_CACHE,
},
[RDT_RESOURCE_L3DATA] =
{
.rid = RDT_RESOURCE_L3DATA,
.name = "L3DATA",
.domains = domain_init(RDT_RESOURCE_L3DATA),
.msr_base = IA32_L3_CBM_BASE,
.msr_update = cat_wrmsr,
.cache_level = 3,
.cache = {
.min_cbm_bits = 1,
.cbm_idx_mult = 2,
.cbm_idx_offset = 0,
},
.parse_ctrlval = parse_cbm,
.format_str = "%d=%0*x",
.fflags = RFTYPE_RES_CACHE,
},
[RDT_RESOURCE_L3CODE] =
{
.rid = RDT_RESOURCE_L3CODE,
.name = "L3CODE",
.domains = domain_init(RDT_RESOURCE_L3CODE),
.msr_base = IA32_L3_CBM_BASE,
.msr_update = cat_wrmsr,
.cache_level = 3,
.cache = {
.min_cbm_bits = 1,
.cbm_idx_mult = 2,
.cbm_idx_offset = 1,
},
.parse_ctrlval = parse_cbm,
.format_str = "%d=%0*x",
.fflags = RFTYPE_RES_CACHE,
},
[RDT_RESOURCE_L2] =
{
.rid = RDT_RESOURCE_L2,
.name = "L2",
.domains = domain_init(RDT_RESOURCE_L2),
.msr_base = IA32_L2_CBM_BASE,
.msr_update = cat_wrmsr,
.cache_level = 2,
.cache = {
.min_cbm_bits = 1,
.cbm_idx_mult = 1,
.cbm_idx_offset = 0,
},
.parse_ctrlval = parse_cbm,
.format_str = "%d=%0*x",
.fflags = RFTYPE_RES_CACHE,
},
[RDT_RESOURCE_MBA] =
{
.rid = RDT_RESOURCE_MBA,
.name = "MB",
.domains = domain_init(RDT_RESOURCE_MBA),
.msr_base = IA32_MBA_THRTL_BASE,
.msr_update = mba_wrmsr,
.cache_level = 3,
.parse_ctrlval = parse_bw,
.format_str = "%d=%*d",
.fflags = RFTYPE_RES_MB,
},
};
static unsigned int cbm_idx(struct rdt_resource *r, unsigned int closid)
{
return closid * r->cache.cbm_idx_mult + r->cache.cbm_idx_offset;
}
/*
* cache_alloc_hsw_probe() - Have to probe for Intel haswell server CPUs
* as they do not have CPUID enumeration support for Cache allocation.
* The check for Vendor/Family/Model is not enough to guarantee that
* the MSRs won't #GP fault because only the following SKUs support
* CAT:
* Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
* Intel(R) Xeon(R) CPU E5-2648L v3 @ 1.80GHz
* Intel(R) Xeon(R) CPU E5-2628L v3 @ 2.00GHz
* Intel(R) Xeon(R) CPU E5-2618L v3 @ 2.30GHz
* Intel(R) Xeon(R) CPU E5-2608L v3 @ 2.00GHz
* Intel(R) Xeon(R) CPU E5-2658A v3 @ 2.20GHz
*
* Probe by trying to write the first of the L3 cach mask registers
* and checking that the bits stick. Max CLOSids is always 4 and max cbm length
* is always 20 on hsw server parts. The minimum cache bitmask length
* allowed for HSW server is always 2 bits. Hardcode all of them.
*/
static inline void cache_alloc_hsw_probe(void)
{
struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3];
u32 l, h, max_cbm = BIT_MASK(20) - 1;
if (wrmsr_safe(IA32_L3_CBM_BASE, max_cbm, 0))
return;
rdmsr(IA32_L3_CBM_BASE, l, h);
/* If all the bits were set in MSR, return success */
if (l != max_cbm)
return;
r->num_closid = 4;
r->default_ctrl = max_cbm;
r->cache.cbm_len = 20;
r->cache.shareable_bits = 0xc0000;
r->cache.min_cbm_bits = 2;
r->alloc_capable = true;
r->alloc_enabled = true;
rdt_alloc_capable = true;
}
/*
* rdt_get_mb_table() - get a mapping of bandwidth(b/w) percentage values
* exposed to user interface and the h/w understandable delay values.
*
* The non-linear delay values have the granularity of power of two
* and also the h/w does not guarantee a curve for configured delay
* values vs. actual b/w enforced.
* Hence we need a mapping that is pre calibrated so the user can
* express the memory b/w as a percentage value.
*/
static inline bool rdt_get_mb_table(struct rdt_resource *r)
{
/*
* There are no Intel SKUs as of now to support non-linear delay.
*/
pr_info("MBA b/w map not implemented for cpu:%d, model:%d",
boot_cpu_data.x86, boot_cpu_data.x86_model);
return false;
}
static bool rdt_get_mem_config(struct rdt_resource *r)
{
union cpuid_0x10_3_eax eax;
union cpuid_0x10_x_edx edx;
u32 ebx, ecx;
cpuid_count(0x00000010, 3, &eax.full, &ebx, &ecx, &edx.full);
r->num_closid = edx.split.cos_max + 1;
r->membw.max_delay = eax.split.max_delay + 1;
r->default_ctrl = MAX_MBA_BW;
if (ecx & MBA_IS_LINEAR) {
r->membw.delay_linear = true;
r->membw.min_bw = MAX_MBA_BW - r->membw.max_delay;
r->membw.bw_gran = MAX_MBA_BW - r->membw.max_delay;
} else {
if (!rdt_get_mb_table(r))
return false;
}
r->data_width = 3;
r->alloc_capable = true;
r->alloc_enabled = true;
return true;
}
static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r)
{
union cpuid_0x10_1_eax eax;
union cpuid_0x10_x_edx edx;
u32 ebx, ecx;
cpuid_count(0x00000010, idx, &eax.full, &ebx, &ecx, &edx.full);
r->num_closid = edx.split.cos_max + 1;
r->cache.cbm_len = eax.split.cbm_len + 1;
r->default_ctrl = BIT_MASK(eax.split.cbm_len + 1) - 1;
r->cache.shareable_bits = ebx & r->default_ctrl;
r->data_width = (r->cache.cbm_len + 3) / 4;
r->alloc_capable = true;
r->alloc_enabled = true;
}
static void rdt_get_cdp_l3_config(int type)
{
struct rdt_resource *r_l3 = &rdt_resources_all[RDT_RESOURCE_L3];
struct rdt_resource *r = &rdt_resources_all[type];
r->num_closid = r_l3->num_closid / 2;
r->cache.cbm_len = r_l3->cache.cbm_len;
r->default_ctrl = r_l3->default_ctrl;
r->cache.shareable_bits = r_l3->cache.shareable_bits;
r->data_width = (r->cache.cbm_len + 3) / 4;
r->alloc_capable = true;
/*
* By default, CDP is disabled. CDP can be enabled by mount parameter
* "cdp" during resctrl file system mount time.
*/
r->alloc_enabled = false;
}
static int get_cache_id(int cpu, int level)
{
struct cpu_cacheinfo *ci = get_cpu_cacheinfo(cpu);
int i;
for (i = 0; i < ci->num_leaves; i++) {
if (ci->info_list[i].level == level)
return ci->info_list[i].id;
}
return -1;
}
/*
* Map the memory b/w percentage value to delay values
* that can be written to QOS_MSRs.
* There are currently no SKUs which support non linear delay values.
*/
static u32 delay_bw_map(unsigned long bw, struct rdt_resource *r)
{
if (r->membw.delay_linear)
return MAX_MBA_BW - bw;
pr_warn_once("Non Linear delay-bw map not supported but queried\n");
return r->default_ctrl;
}
static void
mba_wrmsr(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r)
{
unsigned int i;
/* Write the delay values for mba. */
for (i = m->low; i < m->high; i++)
wrmsrl(r->msr_base + i, delay_bw_map(d->ctrl_val[i], r));
}
static void
cat_wrmsr(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r)
{
unsigned int i;
for (i = m->low; i < m->high; i++)
wrmsrl(r->msr_base + cbm_idx(r, i), d->ctrl_val[i]);
}
struct rdt_domain *get_domain_from_cpu(int cpu, struct rdt_resource *r)
{
struct rdt_domain *d;
list_for_each_entry(d, &r->domains, list) {
/* Find the domain that contains this CPU */
if (cpumask_test_cpu(cpu, &d->cpu_mask))
return d;
}
return NULL;
}
void rdt_ctrl_update(void *arg)
{
struct msr_param *m = arg;
struct rdt_resource *r = m->res;
int cpu = smp_processor_id();
struct rdt_domain *d;
d = get_domain_from_cpu(cpu, r);
if (d) {
r->msr_update(d, m, r);
return;
}
pr_warn_once("cpu %d not found in any domain for resource %s\n",
cpu, r->name);
}
/*
* rdt_find_domain - Find a domain in a resource that matches input resource id
*
* Search resource r's domain list to find the resource id. If the resource
* id is found in a domain, return the domain. Otherwise, if requested by
* caller, return the first domain whose id is bigger than the input id.
* The domain list is sorted by id in ascending order.
*/
struct rdt_domain *rdt_find_domain(struct rdt_resource *r, int id,
struct list_head **pos)
{
struct rdt_domain *d;
struct list_head *l;
if (id < 0)
return ERR_PTR(id);
list_for_each(l, &r->domains) {
d = list_entry(l, struct rdt_domain, list);
/* When id is found, return its domain. */
if (id == d->id)
return d;
/* Stop searching when finding id's position in sorted list. */
if (id < d->id)
break;
}
if (pos)
*pos = l;
return NULL;
}
static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
{
struct msr_param m;
u32 *dc;
int i;
dc = kmalloc_array(r->num_closid, sizeof(*d->ctrl_val), GFP_KERNEL);
if (!dc)
return -ENOMEM;
d->ctrl_val = dc;
/*
* Initialize the Control MSRs to having no control.
* For Cache Allocation: Set all bits in cbm
* For Memory Allocation: Set b/w requested to 100
*/
for (i = 0; i < r->num_closid; i++, dc++)
*dc = r->default_ctrl;
m.low = 0;
m.high = r->num_closid;
r->msr_update(d, &m, r);
return 0;
}
static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
{
size_t tsize;
if (is_llc_occupancy_enabled()) {
d->rmid_busy_llc = kcalloc(BITS_TO_LONGS(r->num_rmid),
sizeof(unsigned long),
GFP_KERNEL);
if (!d->rmid_busy_llc)
return -ENOMEM;
INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo);
}
if (is_mbm_total_enabled()) {
tsize = sizeof(*d->mbm_total);
d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
if (!d->mbm_total) {
kfree(d->rmid_busy_llc);
return -ENOMEM;
}
}
if (is_mbm_local_enabled()) {
tsize = sizeof(*d->mbm_local);
d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
if (!d->mbm_local) {
kfree(d->rmid_busy_llc);
kfree(d->mbm_total);
return -ENOMEM;
}
}
if (is_mbm_enabled()) {
INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow);
mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL);
}
return 0;
}
/*
* domain_add_cpu - Add a cpu to a resource's domain list.
*
* If an existing domain in the resource r's domain list matches the cpu's
* resource id, add the cpu in the domain.
*
* Otherwise, a new domain is allocated and inserted into the right position
* in the domain list sorted by id in ascending order.
*
* The order in the domain list is visible to users when we print entries
* in the schemata file and schemata input is validated to have the same order
* as this list.
*/
static void domain_add_cpu(int cpu, struct rdt_resource *r)
{
int id = get_cache_id(cpu, r->cache_level);
struct list_head *add_pos = NULL;
struct rdt_domain *d;
d = rdt_find_domain(r, id, &add_pos);
if (IS_ERR(d)) {
pr_warn("Could't find cache id for cpu %d\n", cpu);
return;
}
if (d) {
cpumask_set_cpu(cpu, &d->cpu_mask);
return;
}
d = kzalloc_node(sizeof(*d), GFP_KERNEL, cpu_to_node(cpu));
if (!d)
return;
d->id = id;
cpumask_set_cpu(cpu, &d->cpu_mask);
if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
kfree(d);
return;
}
if (r->mon_capable && domain_setup_mon_state(r, d)) {
kfree(d);
return;
}
list_add_tail(&d->list, add_pos);
/*
* If resctrl is mounted, add
* per domain monitor data directories.
*/
if (static_branch_unlikely(&rdt_mon_enable_key))
mkdir_mondata_subdir_allrdtgrp(r, d);
}
static void domain_remove_cpu(int cpu, struct rdt_resource *r)
{
int id = get_cache_id(cpu, r->cache_level);
struct rdt_domain *d;
d = rdt_find_domain(r, id, NULL);
if (IS_ERR_OR_NULL(d)) {
pr_warn("Could't find cache id for cpu %d\n", cpu);
return;
}
cpumask_clear_cpu(cpu, &d->cpu_mask);
if (cpumask_empty(&d->cpu_mask)) {
/*
* If resctrl is mounted, remove all the
* per domain monitor data directories.
*/
if (static_branch_unlikely(&rdt_mon_enable_key))
rmdir_mondata_subdir_allrdtgrp(r, d->id);
kfree(d->ctrl_val);
kfree(d->rmid_busy_llc);
kfree(d->mbm_total);
kfree(d->mbm_local);
list_del(&d->list);
if (is_mbm_enabled())
cancel_delayed_work(&d->mbm_over);
if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) {
/*
* When a package is going down, forcefully
* decrement rmid->ebusy. There is no way to know
* that the L3 was flushed and hence may lead to
* incorrect counts in rare scenarios, but leaving
* the RMID as busy creates RMID leaks if the
* package never comes back.
*/
__check_limbo(d, true);
cancel_delayed_work(&d->cqm_limbo);
}
kfree(d);
return;
}
if (r == &rdt_resources_all[RDT_RESOURCE_L3]) {
if (is_mbm_enabled() && cpu == d->mbm_work_cpu) {
cancel_delayed_work(&d->mbm_over);
mbm_setup_overflow_handler(d, 0);
}
if (is_llc_occupancy_enabled() && cpu == d->cqm_work_cpu &&
has_busy_rmid(r, d)) {
cancel_delayed_work(&d->cqm_limbo);
cqm_setup_limbo_handler(d, 0);
}
}
}
static void clear_closid_rmid(int cpu)
{
struct intel_pqr_state *state = this_cpu_ptr(&pqr_state);
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
state->default_closid = 0;
state->default_rmid = 0;
state->cur_closid = 0;
state->cur_rmid = 0;
wrmsr(IA32_PQR_ASSOC, 0, 0);
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
}
static int intel_rdt_online_cpu(unsigned int cpu)
{
struct rdt_resource *r;
mutex_lock(&rdtgroup_mutex);
for_each_capable_rdt_resource(r)
domain_add_cpu(cpu, r);
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
/* The cpu is set in default rdtgroup after online. */
cpumask_set_cpu(cpu, &rdtgroup_default.cpu_mask);
clear_closid_rmid(cpu);
mutex_unlock(&rdtgroup_mutex);
return 0;
}
static void clear_childcpus(struct rdtgroup *r, unsigned int cpu)
{
struct rdtgroup *cr;
list_for_each_entry(cr, &r->mon.crdtgrp_list, mon.crdtgrp_list) {
if (cpumask_test_and_clear_cpu(cpu, &cr->cpu_mask)) {
break;
}
}
}
static int intel_rdt_offline_cpu(unsigned int cpu)
{
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
struct rdtgroup *rdtgrp;
struct rdt_resource *r;
mutex_lock(&rdtgroup_mutex);
for_each_capable_rdt_resource(r)
domain_remove_cpu(cpu, r);
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
list_for_each_entry(rdtgrp, &rdt_all_groups, rdtgroup_list) {
if (cpumask_test_and_clear_cpu(cpu, &rdtgrp->cpu_mask)) {
clear_childcpus(rdtgrp, cpu);
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
break;
}
x86/intel_rdt: Add cpus file Now we populate each directory with a read/write (mode 0644) file named "cpus". This is used to over-ride the resources available to processes in the default resource group when running on specific CPUs. Each "cpus" file reads as a cpumask showing which CPUs belong to this resource group. Initially all online CPUs are assigned to the default group. They can be added to other groups by writing a cpumask to the "cpus" file in the directory for the resource group (which will remove them from the previous group to which they were assigned). CPU online/offline operations will delete CPUs that go offline from whatever group they are in and add new CPUs to the default group. If there are CPUs assigned to a group when the directory is removed, they are returned to the default group. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com> Cc: "Shaohua Li" <shli@fb.com> Cc: "Sai Prakhya" <sai.praneeth.prakhya@intel.com> Cc: "Peter Zijlstra" <peterz@infradead.org> Cc: "Stephane Eranian" <eranian@google.com> Cc: "Dave Hansen" <dave.hansen@intel.com> Cc: "David Carrillo-Cisneros" <davidcc@google.com> Cc: "Nilay Vaish" <nilayvaish@gmail.com> Cc: "Vikas Shivappa" <vikas.shivappa@linux.intel.com> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: "Borislav Petkov" <bp@suse.de> Cc: "H. Peter Anvin" <h.peter.anvin@intel.com> Link: http://lkml.kernel.org/r/1477692289-37412-7-git-send-email-fenghua.yu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-29 05:04:45 +07:00
}
clear_closid_rmid(cpu);
mutex_unlock(&rdtgroup_mutex);
return 0;
}
/*
* Choose a width for the resource name and resource data based on the
* resource that has widest name and cbm.
*/
static __init void rdt_init_padding(void)
{
struct rdt_resource *r;
int cl;
for_each_alloc_capable_rdt_resource(r) {
cl = strlen(r->name);
if (cl > max_name_width)
max_name_width = cl;
if (r->data_width > max_data_width)
max_data_width = r->data_width;
}
}
enum {
RDT_FLAG_CMT,
RDT_FLAG_MBM_TOTAL,
RDT_FLAG_MBM_LOCAL,
RDT_FLAG_L3_CAT,
RDT_FLAG_L3_CDP,
RDT_FLAG_L2_CAT,
RDT_FLAG_MBA,
};
#define RDT_OPT(idx, n, f) \
[idx] = { \
.name = n, \
.flag = f \
}
struct rdt_options {
char *name;
int flag;
bool force_off, force_on;
};
static struct rdt_options rdt_options[] __initdata = {
RDT_OPT(RDT_FLAG_CMT, "cmt", X86_FEATURE_CQM_OCCUP_LLC),
RDT_OPT(RDT_FLAG_MBM_TOTAL, "mbmtotal", X86_FEATURE_CQM_MBM_TOTAL),
RDT_OPT(RDT_FLAG_MBM_LOCAL, "mbmlocal", X86_FEATURE_CQM_MBM_LOCAL),
RDT_OPT(RDT_FLAG_L3_CAT, "l3cat", X86_FEATURE_CAT_L3),
RDT_OPT(RDT_FLAG_L3_CDP, "l3cdp", X86_FEATURE_CDP_L3),
RDT_OPT(RDT_FLAG_L2_CAT, "l2cat", X86_FEATURE_CAT_L2),
RDT_OPT(RDT_FLAG_MBA, "mba", X86_FEATURE_MBA),
};
#define NUM_RDT_OPTIONS ARRAY_SIZE(rdt_options)
static int __init set_rdt_options(char *str)
{
struct rdt_options *o;
bool force_off;
char *tok;
if (*str == '=')
str++;
while ((tok = strsep(&str, ",")) != NULL) {
force_off = *tok == '!';
if (force_off)
tok++;
for (o = rdt_options; o < &rdt_options[NUM_RDT_OPTIONS]; o++) {
if (strcmp(tok, o->name) == 0) {
if (force_off)
o->force_off = true;
else
o->force_on = true;
break;
}
}
}
return 1;
}
__setup("rdt", set_rdt_options);
static bool __init rdt_cpu_has(int flag)
{
bool ret = boot_cpu_has(flag);
struct rdt_options *o;
if (!ret)
return ret;
for (o = rdt_options; o < &rdt_options[NUM_RDT_OPTIONS]; o++) {
if (flag == o->flag) {
if (o->force_off)
ret = false;
if (o->force_on)
ret = true;
break;
}
}
return ret;
}
static __init bool get_rdt_alloc_resources(void)
{
bool ret = false;
if (rdt_alloc_capable)
return true;
if (!boot_cpu_has(X86_FEATURE_RDT_A))
return false;
if (rdt_cpu_has(X86_FEATURE_CAT_L3)) {
rdt_get_cache_alloc_cfg(1, &rdt_resources_all[RDT_RESOURCE_L3]);
if (rdt_cpu_has(X86_FEATURE_CDP_L3)) {
rdt_get_cdp_l3_config(RDT_RESOURCE_L3DATA);
rdt_get_cdp_l3_config(RDT_RESOURCE_L3CODE);
}
ret = true;
}
if (rdt_cpu_has(X86_FEATURE_CAT_L2)) {
/* CPUID 0x10.2 fields are same format at 0x10.1 */
rdt_get_cache_alloc_cfg(2, &rdt_resources_all[RDT_RESOURCE_L2]);
ret = true;
}
if (rdt_cpu_has(X86_FEATURE_MBA)) {
if (rdt_get_mem_config(&rdt_resources_all[RDT_RESOURCE_MBA]))
ret = true;
}
return ret;
}
static __init bool get_rdt_mon_resources(void)
{
if (rdt_cpu_has(X86_FEATURE_CQM_OCCUP_LLC))
rdt_mon_features |= (1 << QOS_L3_OCCUP_EVENT_ID);
if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL))
rdt_mon_features |= (1 << QOS_L3_MBM_TOTAL_EVENT_ID);
if (rdt_cpu_has(X86_FEATURE_CQM_MBM_LOCAL))
rdt_mon_features |= (1 << QOS_L3_MBM_LOCAL_EVENT_ID);
if (!rdt_mon_features)
return false;
return !rdt_get_mon_l3_config(&rdt_resources_all[RDT_RESOURCE_L3]);
}
static __init void rdt_quirks(void)
{
switch (boot_cpu_data.x86_model) {
case INTEL_FAM6_HASWELL_X:
if (!rdt_options[RDT_FLAG_L3_CAT].force_off)
cache_alloc_hsw_probe();
break;
case INTEL_FAM6_SKYLAKE_X:
if (boot_cpu_data.x86_mask <= 4)
set_rdt_options("!cmt,!mbmtotal,!mbmlocal,!l3cat");
}
}
static __init bool get_rdt_resources(void)
{
rdt_quirks();
rdt_alloc_capable = get_rdt_alloc_resources();
rdt_mon_capable = get_rdt_mon_resources();
return (rdt_mon_capable || rdt_alloc_capable);
}
static int __init intel_rdt_late_init(void)
{
struct rdt_resource *r;
int state, ret;
if (!get_rdt_resources())
return -ENODEV;
rdt_init_padding();
state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
"x86/rdt/cat:online:",
intel_rdt_online_cpu, intel_rdt_offline_cpu);
if (state < 0)
return state;
ret = rdtgroup_init();
if (ret) {
cpuhp_remove_state(state);
return ret;
}
for_each_alloc_capable_rdt_resource(r)
pr_info("Intel RDT %s allocation detected\n", r->name);
for_each_mon_capable_rdt_resource(r)
pr_info("Intel RDT %s monitoring detected\n", r->name);
return 0;
}
late_initcall(intel_rdt_late_init);