AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 03:56:44 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
fe2e9f921f
linux_dsm_epyc7002/arch/arm/boot/dts/dbx5x0.dtsi

769 lines
19 KiB
Plaintext
Raw Normal View History

ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 06:07:21 +07:00
/*
* Copyright 2012 Linaro Ltd
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
ARM: ux500: DT: Rename root node "soc-u9500" into "soc" This root node is used in the whole family of chips, the a9500 is just one particular instance. Nodes should be named after the type of object rather than identity. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 20:38:07 +07:00
soc {
ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 06:07:21 +07:00
#address-cells = <1>;
#size-cells = <1>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "stericsson,db8500";
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 00:22:30 +07:00
interrupt-parent = <&intc>;
ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 06:07:21 +07:00
ranges;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 00:22:30 +07:00
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree This provides PL310 Level 2 Cache Controller Device Tree support for all u8500 based devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-08 16:02:02 +07:00
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
interrupts = <0 13 4>;
cache-unified;
cache-level = <2>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 7 0x4>;
};
ARM: ux500: Provide local timer support for Device Tree This enables local timer (AKA: private timer) support for all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16 16:53:24 +07:00
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
interrupts = <1 13 0x304>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
rtc@80154000 {
ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled During a Device Tree boot, all probing will now be completed on parse of the Device Tree binary. In the same patch we remove platform registration of the Real Time Clock. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-26 13:01:31 +07:00
compatible = "arm,rtc-pl031", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x80154000 0x1000>;
interrupts = <0 18 0x4>;
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8012e000 0x80>;
interrupts = <0 119 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <0>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8012e080 0x80>;
interrupts = <0 120 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <1>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8000e000 0x80>;
interrupts = <0 121 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <2>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8000e080 0x80>;
interrupts = <0 122 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <3>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8000e100 0x80>;
interrupts = <0 123 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <4>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8000e180 0x80>;
interrupts = <0 124 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <5>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8011e000 0x80>;
interrupts = <0 125 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <6>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8011e080 0x80>;
interrupts = <0 126 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <7>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
ARM: ux500: Rename the DT compatible entry for i2c devices on Snowball It is believed that the i2c compatible match entry is too long and cumbersome in its current form. This patch takes steps to decrease its length by using ST-Microelectronics' abbreviation ST. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:03 +07:00
"st,nomadik-gpio";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0xa03fe000 0x80>;
interrupts = <0 127 0x4>;
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Ensure vendor specific properties have the vendor's identifier Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-14 17:16:03 +07:00
st,supports-sleepmode;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
gpio-controller;
drivers/gpio: gpio-nomadik: Device Tree bindings This creates Device Tree bindings for the Nomadik GPIO driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Split off from the patch actually implementing the bindings] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-13 21:05:05 +07:00
#gpio-cells = <2>;
gpio-bank = <8>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMU The AB8500 Pinctrl driver uses PRCMU register addresses to control Pinctrl related functions. For this to happen, the Pinctrl driver needs the PRCMU base to work from. We can do that using standard Open Firmware (of_*) function calls, but first we need a mechanism to gain access to the PRCMU device node. We're going to use a Phandle in this case. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Added reg-names="prcmu"; to the prcmu DT node] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-11 22:45:28 +07:00
pinctrl {
ARM: ux500: correct typo in pinctrl Device Tree node The preference is to use '-' instead of '_' in compatible strings. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 23:25:02 +07:00
compatible = "stericsson,nmk-pinctrl";
ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMU The AB8500 Pinctrl driver uses PRCMU register addresses to control Pinctrl related functions. For this to happen, the Pinctrl driver needs the PRCMU base to work from. We can do that using standard Open Firmware (of_*) function calls, but first we need a mechanism to gain access to the PRCMU device node. We're going to use a Phandle in this case. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Added reg-names="prcmu"; to the prcmu DT node] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-11 22:45:28 +07:00
prcm = <&prcmu>;
ARM: ux500: Enable probing of pinctrl through Device Tree The Nomadik GPIO controller now relies on Nomadik pinctrl, however the pinctrl driver is not currently started by any ux500 platform. This is requred or GPIOs do not work at all. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 12:25:36 +07:00
};
ARM: ux500: Populate the ux500-musb Device Tree entry This patch provides all the information to successfully probe() and correctly configure the ux500-musb device driver for DMA. Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:51 +07:00
usb_per5@a03e0000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "stericsson,db8500-musb",
"mentor,musb";
reg = <0xa03e0000 0x10000>;
interrupts = <0 23 0x4>;
ARM: ux500: Populate the ux500-musb Device Tree entry This patch provides all the information to successfully probe() and correctly configure the ux500-musb device driver for DMA. Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:51 +07:00
interrupt-names = "mc";
dr_mode = "otg";
dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
<&dma 38 0 0x0>, /* Logical - MemToDev */
<&dma 37 0 0x2>, /* Logical - DevToMem */
<&dma 37 0 0x0>, /* Logical - MemToDev */
<&dma 36 0 0x2>, /* Logical - DevToMem */
<&dma 36 0 0x0>, /* Logical - MemToDev */
<&dma 19 0 0x2>, /* Logical - DevToMem */
<&dma 19 0 0x0>, /* Logical - MemToDev */
<&dma 18 0 0x2>, /* Logical - DevToMem */
<&dma 18 0 0x0>, /* Logical - MemToDev */
<&dma 17 0 0x2>, /* Logical - DevToMem */
<&dma 17 0 0x0>, /* Logical - MemToDev */
<&dma 16 0 0x2>, /* Logical - DevToMem */
<&dma 16 0 0x0>, /* Logical - MemToDev */
<&dma 39 0 0x2>, /* Logical - DevToMem */
<&dma 39 0 0x0>; /* Logical - MemToDev */
dma-names = "iep_1_9", "oep_1_9",
"iep_2_10", "oep_2_10",
"iep_3_11", "oep_3_11",
"iep_4_12", "oep_4_12",
"iep_5_13", "oep_5_13",
"iep_6_14", "oep_6_14",
"iep_7_15", "oep_7_15",
"iep_8", "oep_8";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API The new DMA is now available, so let's use it to setup ST-Ericsson's DMA40 driver when Device Tree is enabled. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:48 +07:00
dma: dma-controller@801C0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x801C0000 0x1000 0x40010000 0x800>;
ARM: ux500: Supply address location names for the DMA40 DMA controller The DMA40 controller uses two sets of base addresses. In order to have the resources setup by the of_platform framework so they are searchable by name instead of index, we have to set names for them. The names have to be the same as the ones used to fetch them back out of the resource structure. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:47 +07:00
reg-names = "base", "lcpa";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
interrupts = <0 25 0x4>;
ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API The new DMA is now available, so let's use it to setup ST-Ericsson's DMA40 driver when Device Tree is enabled. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:48 +07:00
#dma-cells = <3>;
ARM: ux500: Pass DMA memcpy channels though Device Tree It's now possible to configure memcpy channels dynamically with DT. We're providing them despite the fact that they're the same as the hard-coded channels, as they will be removed once the u8500 platform goes DT-only. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:52 +07:00
memcpy-channels = <56 57 58 59 60>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMU The AB8500 Pinctrl driver uses PRCMU register addresses to control Pinctrl related functions. For this to happen, the Pinctrl driver needs the PRCMU base to work from. We can do that using standard Open Firmware (of_*) function calls, but first we need a mechanism to gain access to the PRCMU device node. We're going to use a Phandle in this case. Signed-off-by: Lee Jones <lee.jones@linaro.org> [Added reg-names="prcmu"; to the prcmu DT node] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-11 22:45:28 +07:00
prcmu: prcmu@80157000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "stericsson,db8500-prcmu";
ARM: arm-soc non-critical fixes for 3.10 Here is a collection of fixes (and some intermixed cleanups) that were considered less important and thus not included in the later parts of the 3.9-rc cycle. It's a bit all over the map, contents wise. A series of ux500 fixes and cleanups, a bunch of various fixes for OMAP and tegra, and some for Freescale i.MX and even Qualcomm MSM. Note that there's also a patch on this branch to globally turn off -Wmaybe-uninitialized when building with -Os. It's been posted several times by Arnd and no dissent was raised, but nobody seemed interested to pick it up. So here it is, as the topmost patch. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRggtQAAoJEIwa5zzehBx3TmYP/i4Kt3JDYEbYyAqNsH3nb0mN 3kLwViUxDdS/aZCXEaNYLwZBUgl1Zyz3oRd39zFCo4dRM2uG1AW+lC73AP3/eW6n 2oHxI43xzwjDNPxRkiipB4NXPyIoIdbRXM6/QIxXzM9zD3MJXj7BpBBpDgGAsLov BQ2r28idxZE6jB4puPjVZCuyG5UMjA0Ko2Fp2em7QXarQBBscDvhAtjqNZ3JPtlN thASsou1B8805J7jf5G8Wz6fNeVJg2wlWMgE9ywJpKFbut4cGM4riS/QvB0fTe6d tmkCae0bw3UD+D+N1gYcZpeGve8oPSHbeyhrSPAfI/wAVBh0J397MgJW5/f0vW8p DffLjQI+S450Kw0Bab41Tn0JnMnXtYUo56yjemdxa/NQJF34ycBFQ3HOm6nFxo7U 6tce2O775uvG0+rJfDbX6M+Mu7QoIi0p8sOdg0/W+pFK08xvaezsOc1NjqTvuYoC s/2LYiIJqVG6tFVU0i/46duQhdp0I/Oj7wXtFXH0ZvZPBz0cDaSU3irB3QA9pNt5 PI6JEBg0FUPUork24gShSUf7un4Itrjlq20HTkC9/z1skx87PbB3Wa7A8jnHeFme tpuPRvmfBWhIhp06AIA8znhDik9xuJ4B7ypsFNM0VyoV/qx+TSIHbViVQuwcOf9b nAidtuhMjE+P2sAu+VGU =bzsu -----END PGP SIGNATURE----- Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical fixes from Olof Johansson: "Here is a collection of fixes (and some intermixed cleanups) that were considered less important and thus not included in the later parts of the 3.9-rc cycle. It's a bit all over the map, contents wise. A series of ux500 fixes and cleanups, a bunch of various fixes for OMAP and tegra, and some for Freescale i.MX and even Qualcomm MSM. Note that there's also a patch on this branch to globally turn off -Wmaybe-uninitialized when building with -Os. It's been posted several times by Arnd and no dissent was raised, but nobody seemed interested to pick it up. So here it is, as the topmost patch." * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) Turn off -Wmaybe-uninitialized when building with -Os ARM: orion5x: include linux/cpu.h ARM: tegra: call cpu_do_idle from C code ARM: u300: fix ages old copy/paste bug ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7 ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled ARM: tegra: fix build error when THUMB2_KERNEL enabled ARM: msm: Fix uncompess.h tx underrun check ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS" ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" ARM: mach-imx: mach-imx6q: Fix sparse warnings ARM: mach-imx: src: Include "common.h ARM: mach-imx: gpc: Include "common.h" ARM: mach-imx: avic: Staticize *avic_base ARM: mach-imx: tzic: Staticize *tzic_base ARM: mach-imx: clk: Include "clk.h" ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops ...
2013-05-02 22:56:55 +07:00
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT This fixes a regression introduced by commit: 05ec260 mfd:db8500-prcmu: update resource passing All DBx5x0 based SoCs have access to two Tightly Coupled Memory (TCM) locations based on the PRCMU itself. One area from program memory (TCPM) and one for data memory (TCDM). The PRCMU needs to know where these are in order to function correctly. However, these are currently passed though platform device resources, which can only be obtained if Device Tree booting isn't in use. Thus we must also support them in DT by supplying them through the PRCMU node. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26 17:26:15 +07:00
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
ARM: ux500: PRCMU related configuration and layout corrections for Device Tree Apply db8500 related PRCMU Device Tree settings and clean up some formatting errors. We also remove one of the PRCMU assigned IRQs, as it is currently not used. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-28 15:50:49 +07:00
interrupts = <0 47 0x4>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT This patch adds the information required for successful registration of the PRCMU timer 4 (clocksource) driver to the db8500 Device Tree include file. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 16:00:15 +07:00
#size-cells = <1>;
ARM: ux500: Identify the PRCMU as an interrupt controller We're just about to provide the DB8500-PRCMU with its own IRQ domain, so that its subordinate drivers can use it as an interrupt controller. It's obligatory for all IRQ controllers to reference themselves as such from its own node in Device Tree. This patch does just that. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-08-03 21:42:25 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT This patch adds the information required for successful registration of the PRCMU timer 4 (clocksource) driver to the db8500 Device Tree include file. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 16:00:15 +07:00
ranges;
ARM: ux500: PRCMU related configuration and layout corrections for Device Tree Apply db8500 related PRCMU Device Tree settings and clean up some formatting errors. We also remove one of the PRCMU assigned IRQs, as it is currently not used. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-28 15:50:49 +07:00
prcmu-timer-4@80157450 {
ARM: ux500: Configure the PRCMU Timer for db8500 based devices in DT This patch adds the information required for successful registration of the PRCMU timer 4 (clocksource) driver to the db8500 Device Tree include file. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 16:00:15 +07:00
compatible = "stericsson,db8500-prcmu-timer-4";
reg = <0x80157450 0xC>;
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, also adds the platform data to support the old fashion. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 17:56:43 +07:00
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
interrupts = <21 0x4>, <22 0x4>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
status = "disabled";
};
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
db8500-prcmu-regulators {
compatible = "stericsson,db8500-prcmu-regulator";
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vape";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_varm";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vmodem";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vpll";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vsmps1";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vsmps2";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vsmps3";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_vrf1";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sva_mmdsp";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sva_mmdsp_ret";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sva_pipe";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sia_mmdsp";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sia_pipe";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_sga";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_b2r2_mcde";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_esram12";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_esram12_ret";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_esram34";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "db8500_esram34_ret";
ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree Here we inform Device Tree of which regulators are provided by the db8500- prcmu. This way we can reference some of their consumers directly from the Device Tree e.g. SMSC911x Ethernet chip. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-04 19:32:34 +07:00
};
};
mfd: ab8500: Kill "reg" property from binding The ab8500 device is a child of the prcmu device, which is a memory mapped bus device, whose children are addressable using physical memory addresses, not using mailboxes, so a mailbox number in the ab8500 node cannot be parsed by DT. Nothing uses this number, since it was only introduced as part of the failed attempt to clean up prcmu mailbox handling, and we can simply remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12 15:39:01 +07:00
ab8500 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "stericsson,ab8500";
ARM: ux500: Force AB8500 to use the GIC as its interrupt controller It's understood that the AB8500 should be subordinate to the DB8500; however, the AB8500 uses the GIC as it's interrupt controller. If we do not specify which IRQ controller to use the default is to use the next encountered IRQ controller as we climb the tree. This would be the DB8500. This patch ensures the AB8500 makes use of the correct interrupt controller. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-08-04 02:37:35 +07:00
interrupt-parent = <&intc>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
interrupts = <0 40 0x4>;
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 09:49:33 +07:00
interrupt-controller;
#interrupt-cells = <2>;
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices Here we add a node for the AB8500 Real Time Clock in all devices supporting the DB8500. The AB8500 RTC driver makes use of named interrupts we provide support for this too. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-26 13:03:48 +07:00
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 0x4
18 0x4>;
interrupt-names = "60S", "ALARM";
};
ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree This patch provides support for the ab8500-gpadc driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-28 15:59:26 +07:00
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 09:49:33 +07:00
interrupts = <32 0x4
39 0x4>;
ARM: ux500: Add a ab8500-gpadc node to the db8500 Device Tree This patch provides support for the ab8500-gpadc driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-28 15:59:26 +07:00
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500: Add devicetree support for fuelgauge - This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19 09:45:41 +07:00
ab8500_battery: ab8500_battery {
stericsson,battery-type = "LIPO";
thermistor-on-batctrl;
};
ab8500_fg {
compatible = "stericsson,ab8500-fg";
battery = <&ab8500_battery>;
};
ab8500: Add devicetree support for btemp This patch adds device tree support for battery-temperature-monitor driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19 10:16:58 +07:00
ab8500_btemp {
compatible = "stericsson,ab8500-btemp";
battery = <&ab8500_battery>;
};
ab8500: Add devicetree support for charger This patch adds device tree support for ab8500-charger driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19 10:17:47 +07:00
ab8500_charger {
compatible = "stericsson,ab8500-charger";
battery = <&ab8500_battery>;
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500: Add devicetree support for chargalg This patch adds device tree support for charging algorithm driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-10-31 22:40:33 +07:00
ab8500_chargalg {
compatible = "stericsson,ab8500-chargalg";
battery = <&ab8500_battery>;
};
ab8500: Add devicetree support for fuelgauge - This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19 09:45:41 +07:00
ab8500_usb {
ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 20:40:24 +07:00
compatible = "stericsson,ab8500-usb";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 09:49:33 +07:00
interrupts = < 90 0x4
96 0x4
14 0x4
15 0x4
79 0x4
74 0x4
75 0x4>;
ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 20:40:24 +07:00
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
"VBUS_DET_R",
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
ARM: ux500: Fix intcore regulator name Ux500 regulator name for V-INTCORE is misspelled as vinitcore instead of vintcore in some .dts file, causing the AB8500 regulator driver to not bind properly. Fix this by replacing all occurrences with the right name. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 16:16:56 +07:00
vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 20:40:24 +07:00
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ARM: ux500: Add support for input/ponkey into the db8500's Device Tree Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-02 14:45:40 +07:00
ab8500-ponkey {
ARM: ux500: Match Power-On-Key MFD and DTS compatible strings The compatible string found in the Power-On-Key's MFD cell matches the device name provided in the driver. Keeping this naming convention seems like a good idea, so we're changing the one found in the DTS file to match. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-08-09 19:00:12 +07:00
compatible = "stericsson,ab8500-poweron-key";
ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-29 09:49:33 +07:00
interrupts = <6 0x4
7 0x4>;
ARM: ux500: Add support for input/ponkey into the db8500's Device Tree Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-02 14:45:40 +07:00
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl This adds the DT node for the mfd/ab8500-sysctrl driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 18:53:55 +07:00
ab8500-sysctrl {
compatible = "stericsson,ab8500-sysctrl";
};
ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm This adds the DT node for the misc/ab8500-pwm driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-03 19:03:59 +07:00
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
};
ARM: ux500: Apply ab8500-debug node do the db8500 DT structure This node has no properties. It merely allows probing of the ab8500-debugfs driver during Device Tree initialisation. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-05-01 22:11:19 +07:00
ab8500-debugfs {
compatible = "stericsson,ab8500-debug";
};
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree Ensure correct probing and pass though important configuration options to the AB8500 CODEC driver when DT is enabled Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-25 18:50:13 +07:00
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_aux1";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
/* BUG: If turned off MMC will be affected. */
regulator-always-on;
};
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_aux2";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_aux3";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ARM: ux500: Fix intcore regulator name Ux500 regulator name for V-INTCORE is misspelled as vinitcore instead of vintcore in some .dts file, causing the AB8500 regulator driver to not bind properly. Fix this by replacing all occurrences with the right name. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 16:16:56 +07:00
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-compatible = "ab8500_ldo_intcore";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_tvout";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_usb";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_audio";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_anamic1";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_amamic2";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_dmic";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
ARM: dts: db8500: add property "regulator-compatible" regulator node Device's regulator matches their hardware counterparts with the property "regulator-compatible" of each child regulator node in place of the child node name. Add the property "regulator-compatible" for each regulator with their hardware counterpart's name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 19:23:05 +07:00
regulator-compatible = "ab8500_ldo_ana";
ARM: ux500: Add support for ab8500 regulators into the Device Tree Here we supply the information required to setup regulators successfully on Snowball and other db8500 variants which use the ab8500 regulators. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:29:53 +07:00
};
};
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
};
i2c@80004000 {
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:07:02 +07:00
arm,primecell-periphid = <0x180024>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
i2c@80122000 {
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:07:02 +07:00
arm,primecell-periphid = <0x180024>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
i2c@80128000 {
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:07:02 +07:00
arm,primecell-periphid = <0x180024>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
i2c@80110000 {
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:07:02 +07:00
arm,primecell-periphid = <0x180024>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
i2c@8012a000 {
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:07:02 +07:00
arm,primecell-periphid = <0x180024>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
#address-cells = <1>;
#size-cells = <0>;
ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-06-18 15:55:44 +07:00
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
ARM: ux500: Fix SSP register address format SSP won't probe unless the specified register address format is correct i.e. we have to specify that the address is in hex. After this patch has been applied, the SSP (SPI) driver probes as expected. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-07 18:09:34 +07:00
reg = <0x80002000 0x1000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
interrupts = <0 14 0x4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ARM: ux500: Enable PL022 SSP Controller in Device Tree This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:47:11 +07:00
// Add one of these for each child device
ARM: ux500: Use correct format for dynamic IRQ assignment This patch applies the correct format requested by the irq domain. For chained IRQs which use GPIO lines as IRQs, we stipulate that a two cell request is required. The first cell contains the requested IRQ and the second can contain flags pertaining to edge detection and level sensitive values. The zeroth cell specifies the GPIO controller by use of a phandle. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29 13:17:36 +07:00
cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
&gpio6 22 0x4 &gpio7 0 0x4>;
ARM: ux500: Enable PL022 SSP Controller in Device Tree This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:47:11 +07:00
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
};
uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 0x4>;
ARM: ux500: Supply UART's DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:49 +07:00
dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
<&dma 13 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Supply UART's DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:49 +07:00
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 0x4>;
ARM: ux500: Supply UART's DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:49 +07:00
dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
<&dma 12 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Supply UART's DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:49 +07:00
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 0x4>;
ARM: ux500: Supply UART's DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:49 +07:00
dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
<&dma 11 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi0_per1@80126000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
ARM: ux500: Supply MMC DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:50 +07:00
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
<&dma 29 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi1_per2@80118000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
ARM: ux500: Supply MMC DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:50 +07:00
dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
<&dma 32 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi2_per3@80005000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
ARM: ux500: Supply MMC DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:50 +07:00
dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
<&dma 28 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi3_per2@80119000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi4_per2@80114000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
ARM: ux500: Supply MMC DMA configuration via Device Tree When requesting a channel, a DMA client needs to pass some pieces of information such as; request channel, device type, channel type and direction etc. Normally we do this in the form of platform data, but when DT is enabled we need to pass it using the driver's bindings instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-03 21:31:50 +07:00
dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
<&dma 42 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
status = "disabled";
};
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
ARM: ux500: Elaborate on SDI device node names in Device Tree In the DB8500 Reference Manual SDI devices are described as being part of peripheral blocks. This is more in line with how these devices are actually represented in hardware, so here we detail which peripheral block each of the SDI devices belong in the node name. Requested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-09-26 18:55:56 +07:00
sdi5_per3@80008000 {
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
compatible = "arm,pl18x", "arm,primecell";
ARM: ux500: Correct SDI5 address and add some format changes Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:10:05 +07:00
reg = <0x80008000 0x1000>;
ARM: ux500: db8500: list most devices in the snowball device tree This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:46:17 +07:00
interrupts = <0 100 0x4>;
status = "disabled";
};
ARM: ux500: Enable the SMSC9115 on Snowball via Device Tree Here we split the description of the external-bus@50000000 over two description files. In the more generic db8500 description file we only specify the external-bus. Normally this would be used to communicate with a NOR-flash device. On the Snowball however, the SMSC9115 Ethernet chip occupies it. In the Snowball board specific description file is where we actually specify that it is in fact the Ethernet device which lives here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 16:53:18 +07:00
ARM: ux500: Add nodes for the MSP into Device Tree This patch inserts all known MSP devices into the DBx5x0 Device Tree disabled and enables the two important ones for the Snowball low-cost development board. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-31 18:37:16 +07:00
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
interrupts = <0 31 0x4>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
// HDMI sound
msp2: msp@80117000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80117000 0x1000>;
interrupts = <0 98 0x4>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
interrupts = <0 62 0x4>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
ARM: ux500: Enable the SMSC9115 on Snowball via Device Tree Here we split the description of the external-bus@50000000 over two description files. In the more generic db8500 description file we only specify the external-bus. Normally this would be used to communicate with a NOR-flash device. On the Snowball however, the SMSC9115 Ethernet chip occupies it. In the Snowball board specific description file is where we actually specify that it is in fact the Ethernet device which lives here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-24 16:53:18 +07:00
external-bus@50000000 {
compatible = "simple-bus";
reg = <0x50000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000000>;
status = "disabled";
};
Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, also adds the platform data to support the old fashion. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 17:56:43 +07:00
cpufreq-cooling {
compatible = "stericsson,db8500-cpufreq-cooling";
status = "disabled";
};
ARM: ux500: Add node for the MMC GPIO regulator There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:18:14 +07:00
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
ARM: ux500: Set correct MMCI regulator voltages in the ux5x0 Device Tree Correct the voltage specified by the mmci regulator node in Device Tree. Despite the MMC subsystem insisting on v3.3, we actually only offer v2.9, and not v2.6 which must have actually been a typo. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-06 21:00:01 +07:00
regulator-max-microvolt = <2900000>;
ARM: ux500: Add node for the MMC GPIO regulator There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:18:14 +07:00
regulator-name = "mmci-reg";
regulator-type = "voltage";
ARM: ux500: Setup correct settling time for the MMCI regulator The GPIO controlled MMCI regulator used on the ux5x0 boards takes 100us to settle. There's already a binding to provide such information. Let's make use of it. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-07 20:46:01 +07:00
startup-delay-us = <100>;
ARM: ux500: Specify the ux5x0 MMCI regulator's on/off GPIO as high-enable If not specified, the GPIO control bit is inverted by default i.e. low-enable and high-disable. This is not the case with the MMCI regulator, hence it will turn on during a disable and off when regulator_enable() is invoked. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-06 22:00:46 +07:00
enable-active-high;
ARM: ux500: Add node for the MMC GPIO regulator There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:18:14 +07:00
states = <1800000 0x1
2900000 0x0>;
ARM: ux500: Disable the MMCI gpio-regulator by default Not all supported boards will require a MMCI gpio-regulator, therefore it's a good idea to only enable the node when and if it is required. Let's disable it by default. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-15 20:02:16 +07:00
status = "disabled";
ARM: ux500: Add node for the MMC GPIO regulator There is a very simple mechanism to change and SDI's voltage which consists of toggling some GPIOs. This scenario can be better handled if we convert it to a GPIO regulator. This patch provides one which can be read from Device Tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24 17:18:14 +07:00
};
ARM: ux500: Add Device Tree nodes for the ux500 Crypt device This patch provides information required to setup ux500-crypt when booting with DT on the Snowball low-cost development platform. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-16 18:27:21 +07:00
cryp@a03cb000 {
compatible = "stericsson,ux500-cryp";
reg = <0xa03cb000 0x1000>;
interrupts = <0 15 0x4>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
ARM: ux500: split dts file for snowball into generic part db8500.dtsi can be used by all systems with a db8500 or db9500 SoC, while snowball.dts is board specific. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03 06:07:21 +07:00
};
};
Reference in New Issue Copy Permalink