linux_dsm_epyc7002/arch/x86/kernel/cpu/aperfmperf.c

128 lines
2.7 KiB
C
Raw Normal View History

x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
/*
* x86 APERF/MPERF KHz calculation for
* /sys/.../cpufreq/scaling_cur_freq
*
* Copyright (C) 2017 Intel Corp.
* Author: Len Brown <len.brown@intel.com>
*
* This file is licensed under GPLv2.
*/
#include <linux/delay.h>
#include <linux/ktime.h>
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
#include <linux/math64.h>
#include <linux/percpu.h>
#include <linux/smp.h>
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
#include "cpu.h"
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
struct aperfmperf_sample {
unsigned int khz;
ktime_t time;
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
u64 aperf;
u64 mperf;
};
static DEFINE_PER_CPU(struct aperfmperf_sample, samples);
#define APERFMPERF_CACHE_THRESHOLD_MS 10
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
#define APERFMPERF_REFRESH_DELAY_MS 10
#define APERFMPERF_STALE_THRESHOLD_MS 1000
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
/*
* aperfmperf_snapshot_khz()
* On the current CPU, snapshot APERF, MPERF, and jiffies
* unless we already did it within 10ms
* calculate kHz, save snapshot
*/
static void aperfmperf_snapshot_khz(void *dummy)
{
u64 aperf, aperf_delta;
u64 mperf, mperf_delta;
struct aperfmperf_sample *s = this_cpu_ptr(&samples);
unsigned long flags;
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
local_irq_save(flags);
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
local_irq_restore(flags);
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
aperf_delta = aperf - s->aperf;
mperf_delta = mperf - s->mperf;
/*
* There is no architectural guarantee that MPERF
* increments faster than we can read it.
*/
if (mperf_delta == 0)
return;
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
s->time = ktime_get();
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
s->aperf = aperf;
s->mperf = mperf;
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
s->khz = div64_u64((cpu_khz * aperf_delta), mperf_delta);
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
}
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
static bool aperfmperf_snapshot_cpu(int cpu, ktime_t now, bool wait)
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
{
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
s64 time_delta = ktime_ms_delta(now, per_cpu(samples.time, cpu));
/* Don't bother re-computing within the cache threshold time. */
if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
return true;
smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, wait);
/* Return false if the previous iteration was too long ago. */
return time_delta <= APERFMPERF_STALE_THRESHOLD_MS;
}
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
unsigned int aperfmperf_get_khz(int cpu)
{
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
if (!cpu_khz)
return 0;
if (!static_cpu_has(X86_FEATURE_APERFMPERF))
return 0;
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
aperfmperf_snapshot_cpu(cpu, ktime_get(), true);
return per_cpu(samples.khz, cpu);
}
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 08:13:40 +07:00
void arch_freq_prepare_all(void)
{
ktime_t now = ktime_get();
bool wait = false;
int cpu;
if (!cpu_khz)
return;
if (!static_cpu_has(X86_FEATURE_APERFMPERF))
return;
for_each_online_cpu(cpu)
if (!aperfmperf_snapshot_cpu(cpu, now, false))
wait = true;
if (wait)
msleep(APERFMPERF_REFRESH_DELAY_MS);
}
unsigned int arch_freq_get_on_cpu(int cpu)
{
if (!cpu_khz)
return 0;
if (!static_cpu_has(X86_FEATURE_APERFMPERF))
return 0;
if (aperfmperf_snapshot_cpu(cpu, ktime_get(), true))
return per_cpu(samples.khz, cpu);
msleep(APERFMPERF_REFRESH_DELAY_MS);
smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1);
x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF The goal of this change is to give users a uniform and meaningful result when they read /sys/...cpufreq/scaling_cur_freq on modern x86 hardware, as compared to what they get today. Modern x86 processors include the hardware needed to accurately calculate frequency over an interval -- APERF, MPERF, and the TSC. Here we provide an x86 routine to make this calculation on supported hardware, and use it in preference to any driver driver-specific cpufreq_driver.get() routine. MHz is computed like so: MHz = base_MHz * delta_APERF / delta_MPERF MHz is the average frequency of the busy processor over a measurement interval. The interval is defined to be the time between successive invocations of aperfmperf_khz_on_cpu(), which are expected to to happen on-demand when users read sysfs attribute cpufreq/scaling_cur_freq. As with previous methods of calculating MHz, idle time is excluded. base_MHz above is from TSC calibration global "cpu_khz". This x86 native method to calculate MHz returns a meaningful result no matter if P-states are controlled by hardware or firmware and/or if the Linux cpufreq sub-system is or is-not installed. When this routine is invoked more frequently, the measurement interval becomes shorter. However, the code limits re-computation to 10ms intervals so that average frequency remains meaningful. Discerning users are encouraged to take advantage of the turbostat(8) utility, which can gracefully handle concurrent measurement intervals of arbitrary length. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24 12:11:52 +07:00
return per_cpu(samples.khz, cpu);
}