2010-05-27 04:42:14 +07:00
|
|
|
/*
|
|
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
|
|
*
|
|
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
|
|
* Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
|
|
|
|
*
|
|
|
|
* RTC clock driver for the RTC part of the AB8500 Power management chip.
|
|
|
|
* Based on RTC clock driver for the AB3100 Analog Baseband Chip by
|
|
|
|
* Linus Walleij <linus.walleij@stericsson.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/rtc.h>
|
2010-09-10 22:47:56 +07:00
|
|
|
#include <linux/mfd/abx500.h>
|
2011-12-02 20:16:33 +07:00
|
|
|
#include <linux/mfd/abx500/ab8500.h>
|
2010-05-27 04:42:14 +07:00
|
|
|
#include <linux/delay.h>
|
2012-07-12 04:02:17 +07:00
|
|
|
#include <linux/of.h>
|
2015-09-21 22:46:58 +07:00
|
|
|
#include <linux/pm_wakeirq.h>
|
2010-05-27 04:42:14 +07:00
|
|
|
|
2010-09-10 22:47:56 +07:00
|
|
|
#define AB8500_RTC_SOFF_STAT_REG 0x00
|
|
|
|
#define AB8500_RTC_CC_CONF_REG 0x01
|
|
|
|
#define AB8500_RTC_READ_REQ_REG 0x02
|
|
|
|
#define AB8500_RTC_WATCH_TSECMID_REG 0x03
|
|
|
|
#define AB8500_RTC_WATCH_TSECHI_REG 0x04
|
|
|
|
#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05
|
|
|
|
#define AB8500_RTC_WATCH_TMIN_MID_REG 0x06
|
|
|
|
#define AB8500_RTC_WATCH_TMIN_HI_REG 0x07
|
|
|
|
#define AB8500_RTC_ALRM_MIN_LOW_REG 0x08
|
|
|
|
#define AB8500_RTC_ALRM_MIN_MID_REG 0x09
|
|
|
|
#define AB8500_RTC_ALRM_MIN_HI_REG 0x0A
|
|
|
|
#define AB8500_RTC_STAT_REG 0x0B
|
|
|
|
#define AB8500_RTC_BKUP_CHG_REG 0x0C
|
|
|
|
#define AB8500_RTC_FORCE_BKUP_REG 0x0D
|
|
|
|
#define AB8500_RTC_CALIB_REG 0x0E
|
|
|
|
#define AB8500_RTC_SWITCH_STAT_REG 0x0F
|
2013-07-04 05:07:45 +07:00
|
|
|
#define AB8540_RTC_ALRM_SEC 0x22
|
|
|
|
#define AB8540_RTC_ALRM_MIN_LOW_REG 0x23
|
|
|
|
#define AB8540_RTC_ALRM_MIN_MID_REG 0x24
|
|
|
|
#define AB8540_RTC_ALRM_MIN_HI_REG 0x25
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
/* RtcReadRequest bits */
|
|
|
|
#define RTC_READ_REQUEST 0x01
|
|
|
|
#define RTC_WRITE_REQUEST 0x02
|
|
|
|
|
|
|
|
/* RtcCtrl bits */
|
|
|
|
#define RTC_ALARM_ENA 0x04
|
|
|
|
#define RTC_STATUS_DATA 0x01
|
|
|
|
|
|
|
|
#define COUNTS_PER_SEC (0xF000 / 60)
|
|
|
|
#define AB8500_RTC_EPOCH 2000
|
|
|
|
|
2010-09-10 22:47:56 +07:00
|
|
|
static const u8 ab8500_rtc_time_regs[] = {
|
2010-05-27 04:42:14 +07:00
|
|
|
AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
|
|
|
|
AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
|
|
|
|
AB8500_RTC_WATCH_TSECMID_REG
|
|
|
|
};
|
|
|
|
|
2010-09-10 22:47:56 +07:00
|
|
|
static const u8 ab8500_rtc_alarm_regs[] = {
|
2010-05-27 04:42:14 +07:00
|
|
|
AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
|
|
|
|
AB8500_RTC_ALRM_MIN_LOW_REG
|
|
|
|
};
|
|
|
|
|
2013-07-04 05:07:45 +07:00
|
|
|
static const u8 ab8540_rtc_alarm_regs[] = {
|
|
|
|
AB8540_RTC_ALRM_MIN_HI_REG, AB8540_RTC_ALRM_MIN_MID_REG,
|
|
|
|
AB8540_RTC_ALRM_MIN_LOW_REG, AB8540_RTC_ALRM_SEC
|
|
|
|
};
|
|
|
|
|
2010-05-27 04:42:14 +07:00
|
|
|
/* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */
|
|
|
|
static unsigned long get_elapsed_seconds(int year)
|
|
|
|
{
|
|
|
|
unsigned long secs;
|
|
|
|
struct rtc_time tm = {
|
|
|
|
.tm_year = year - 1900,
|
|
|
|
.tm_mday = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function calculates secs from 1970 and not from
|
|
|
|
* 1900, even if we supply the offset from year 1900.
|
|
|
|
*/
|
|
|
|
rtc_tm_to_time(&tm, &secs);
|
|
|
|
return secs;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
|
|
{
|
|
|
|
unsigned long timeout = jiffies + HZ;
|
|
|
|
int retval, i;
|
|
|
|
unsigned long mins, secs;
|
|
|
|
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
|
2010-09-10 22:47:56 +07:00
|
|
|
u8 value;
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
/* Request a data read */
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_set_register_interruptible(dev,
|
|
|
|
AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
|
2012-07-31 04:41:43 +07:00
|
|
|
/* Wait for some cycles after enabling the rtc read in ab8500 */
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
|
|
retval = abx500_get_register_interruptible(dev,
|
|
|
|
AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
|
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
if (!(value & RTC_READ_REQUEST))
|
|
|
|
break;
|
|
|
|
|
|
|
|
usleep_range(1000, 5000);
|
2010-05-27 04:42:14 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Read the Watchtime registers */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_get_register_interruptible(dev,
|
|
|
|
AB8500_RTC, ab8500_rtc_time_regs[i], &value);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
2010-09-10 22:47:56 +07:00
|
|
|
buf[i] = value;
|
2010-05-27 04:42:14 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
|
|
|
|
|
|
|
|
secs = (buf[3] << 8) | buf[4];
|
|
|
|
secs = secs / COUNTS_PER_SEC;
|
|
|
|
secs = secs + (mins * 60);
|
|
|
|
|
|
|
|
/* Add back the initially subtracted number of seconds */
|
|
|
|
secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
|
|
|
|
|
|
|
|
rtc_time_to_tm(secs, tm);
|
|
|
|
return rtc_valid_tm(tm);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
|
|
{
|
|
|
|
int retval, i;
|
|
|
|
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
|
|
|
|
unsigned long no_secs, no_mins, secs = 0;
|
|
|
|
|
|
|
|
if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) {
|
|
|
|
dev_dbg(dev, "year should be equal to or greater than %d\n",
|
|
|
|
AB8500_RTC_EPOCH);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get the number of seconds since 1970 */
|
|
|
|
rtc_tm_to_time(tm, &secs);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Convert it to the number of seconds since 01-01-2000 00:00:00, since
|
|
|
|
* we only have a small counter in the RTC.
|
|
|
|
*/
|
|
|
|
secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
|
|
|
|
|
|
|
|
no_mins = secs / 60;
|
|
|
|
|
|
|
|
no_secs = secs % 60;
|
|
|
|
/* Make the seconds count as per the RTC resolution */
|
|
|
|
no_secs = no_secs * COUNTS_PER_SEC;
|
|
|
|
|
|
|
|
buf[4] = no_secs & 0xFF;
|
|
|
|
buf[3] = (no_secs >> 8) & 0xFF;
|
|
|
|
|
|
|
|
buf[2] = no_mins & 0xFF;
|
|
|
|
buf[1] = (no_mins >> 8) & 0xFF;
|
|
|
|
buf[0] = (no_mins >> 16) & 0xFF;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
ab8500_rtc_time_regs[i], buf[i]);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Request a data write */
|
2010-09-10 22:47:56 +07:00
|
|
|
return abx500_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
|
2010-05-27 04:42:14 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
|
|
{
|
|
|
|
int retval, i;
|
2010-09-10 22:47:56 +07:00
|
|
|
u8 rtc_ctrl, value;
|
2010-05-27 04:42:14 +07:00
|
|
|
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
|
|
|
|
unsigned long secs, mins;
|
|
|
|
|
|
|
|
/* Check if the alarm is enabled or not */
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_STAT_REG, &rtc_ctrl);
|
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
if (rtc_ctrl & RTC_ALARM_ENA)
|
|
|
|
alarm->enabled = 1;
|
|
|
|
else
|
|
|
|
alarm->enabled = 0;
|
|
|
|
|
|
|
|
alarm->pending = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
|
|
|
|
ab8500_rtc_alarm_regs[i], &value);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
2010-09-10 22:47:56 +07:00
|
|
|
buf[i] = value;
|
2010-05-27 04:42:14 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
|
|
|
|
secs = mins * 60;
|
|
|
|
|
|
|
|
/* Add back the initially subtracted number of seconds */
|
|
|
|
secs += get_elapsed_seconds(AB8500_RTC_EPOCH);
|
|
|
|
|
|
|
|
rtc_time_to_tm(secs, &alarm->time);
|
|
|
|
|
|
|
|
return rtc_valid_tm(&alarm->time);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
|
|
|
|
{
|
2010-09-10 22:47:56 +07:00
|
|
|
return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
|
|
|
|
enabled ? RTC_ALARM_ENA : 0);
|
2010-05-27 04:42:14 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
|
|
{
|
|
|
|
int retval, i;
|
|
|
|
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
|
2012-07-31 04:41:41 +07:00
|
|
|
unsigned long mins, secs = 0, cursec = 0;
|
|
|
|
struct rtc_time curtm;
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
|
|
|
|
dev_dbg(dev, "year should be equal to or greater than %d\n",
|
|
|
|
AB8500_RTC_EPOCH);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get the number of seconds since 1970 */
|
|
|
|
rtc_tm_to_time(&alarm->time, &secs);
|
|
|
|
|
2012-07-31 04:41:41 +07:00
|
|
|
/*
|
|
|
|
* Check whether alarm is set less than 1min.
|
|
|
|
* Since our RTC doesn't support alarm resolution less than 1min,
|
|
|
|
* return -EINVAL, so UIE EMUL can take it up, incase of UIE_ON
|
|
|
|
*/
|
|
|
|
ab8500_rtc_read_time(dev, &curtm); /* Read current time */
|
|
|
|
rtc_tm_to_time(&curtm, &cursec);
|
|
|
|
if ((secs - cursec) < 59) {
|
|
|
|
dev_dbg(dev, "Alarm less than 1 minute not supported\r\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2010-05-27 04:42:14 +07:00
|
|
|
/*
|
|
|
|
* Convert it to the number of seconds since 01-01-2000 00:00:00, since
|
|
|
|
* we only have a small counter in the RTC.
|
|
|
|
*/
|
|
|
|
secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
|
|
|
|
|
|
|
|
mins = secs / 60;
|
|
|
|
|
|
|
|
buf[2] = mins & 0xFF;
|
|
|
|
buf[1] = (mins >> 8) & 0xFF;
|
|
|
|
buf[0] = (mins >> 16) & 0xFF;
|
|
|
|
|
|
|
|
/* Set the alarm time */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
|
2010-09-10 22:47:56 +07:00
|
|
|
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
ab8500_rtc_alarm_regs[i], buf[i]);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ab8500_rtc_irq_enable(dev, alarm->enabled);
|
|
|
|
}
|
|
|
|
|
2013-07-04 05:07:45 +07:00
|
|
|
static int ab8540_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
|
|
{
|
|
|
|
int retval, i;
|
|
|
|
unsigned char buf[ARRAY_SIZE(ab8540_rtc_alarm_regs)];
|
|
|
|
unsigned long mins, secs = 0;
|
|
|
|
|
|
|
|
if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
|
|
|
|
dev_dbg(dev, "year should be equal to or greater than %d\n",
|
|
|
|
AB8500_RTC_EPOCH);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get the number of seconds since 1970 */
|
|
|
|
rtc_tm_to_time(&alarm->time, &secs);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Convert it to the number of seconds since 01-01-2000 00:00:00
|
|
|
|
*/
|
|
|
|
secs -= get_elapsed_seconds(AB8500_RTC_EPOCH);
|
|
|
|
mins = secs / 60;
|
|
|
|
|
|
|
|
buf[3] = secs % 60;
|
|
|
|
buf[2] = mins & 0xFF;
|
|
|
|
buf[1] = (mins >> 8) & 0xFF;
|
|
|
|
buf[0] = (mins >> 16) & 0xFF;
|
|
|
|
|
|
|
|
/* Set the alarm time */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8540_rtc_alarm_regs); i++) {
|
|
|
|
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
ab8540_rtc_alarm_regs[i], buf[i]);
|
|
|
|
if (retval < 0)
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ab8500_rtc_irq_enable(dev, alarm->enabled);
|
|
|
|
}
|
2012-01-11 06:10:42 +07:00
|
|
|
|
|
|
|
static int ab8500_rtc_set_calibration(struct device *dev, int calibration)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
u8 rtccal = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check that the calibration value (which is in units of 0.5
|
|
|
|
* parts-per-million) is in the AB8500's range for RtcCalibration
|
|
|
|
* register. -128 (0x80) is not permitted because the AB8500 uses
|
|
|
|
* a sign-bit rather than two's complement, so 0x80 is just another
|
|
|
|
* representation of zero.
|
|
|
|
*/
|
|
|
|
if ((calibration < -127) || (calibration > 127)) {
|
|
|
|
dev_err(dev, "RtcCalibration value outside permitted range\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
|
|
|
|
* so need to convert to this sort of representation before writing
|
|
|
|
* into RtcCalibration register...
|
|
|
|
*/
|
|
|
|
if (calibration >= 0)
|
|
|
|
rtccal = 0x7F & calibration;
|
|
|
|
else
|
|
|
|
rtccal = ~(calibration - 1) | 0x80;
|
|
|
|
|
|
|
|
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_CALIB_REG, rtccal);
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ab8500_rtc_get_calibration(struct device *dev, int *calibration)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
u8 rtccal = 0;
|
|
|
|
|
|
|
|
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_CALIB_REG, &rtccal);
|
|
|
|
if (retval >= 0) {
|
|
|
|
/*
|
|
|
|
* The AB8500 uses sign (in bit7) and magnitude (in bits0-7)
|
|
|
|
* so need to convert value from RtcCalibration register into
|
|
|
|
* a two's complement signed value...
|
|
|
|
*/
|
|
|
|
if (rtccal & 0x80)
|
|
|
|
*calibration = 0 - (rtccal & 0x7F);
|
|
|
|
else
|
|
|
|
*calibration = 0x7F & rtccal;
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
int calibration = 0;
|
|
|
|
|
|
|
|
if (sscanf(buf, " %i ", &calibration) != 1) {
|
|
|
|
dev_err(dev, "Failed to store RTC calibration attribute\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ab8500_rtc_set_calibration(dev, calibration);
|
|
|
|
|
|
|
|
return retval ? retval : count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev,
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
int retval = 0;
|
|
|
|
int calibration = 0;
|
|
|
|
|
|
|
|
retval = ab8500_rtc_get_calibration(dev, &calibration);
|
|
|
|
if (retval < 0) {
|
|
|
|
dev_err(dev, "Failed to read RTC calibration attribute\n");
|
|
|
|
sprintf(buf, "0\n");
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
return sprintf(buf, "%d\n", calibration);
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR,
|
|
|
|
ab8500_sysfs_show_rtc_calibration,
|
|
|
|
ab8500_sysfs_store_rtc_calibration);
|
|
|
|
|
|
|
|
static int ab8500_sysfs_rtc_register(struct device *dev)
|
|
|
|
{
|
|
|
|
return device_create_file(dev, &dev_attr_rtc_calibration);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ab8500_sysfs_rtc_unregister(struct device *dev)
|
|
|
|
{
|
|
|
|
device_remove_file(dev, &dev_attr_rtc_calibration);
|
|
|
|
}
|
|
|
|
|
2010-05-27 04:42:14 +07:00
|
|
|
static irqreturn_t rtc_alarm_handler(int irq, void *data)
|
|
|
|
{
|
|
|
|
struct rtc_device *rtc = data;
|
|
|
|
unsigned long events = RTC_IRQF | RTC_AF;
|
|
|
|
|
|
|
|
dev_dbg(&rtc->dev, "%s\n", __func__);
|
|
|
|
rtc_update_irq(rtc, 1, events);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct rtc_class_ops ab8500_rtc_ops = {
|
|
|
|
.read_time = ab8500_rtc_read_time,
|
|
|
|
.set_time = ab8500_rtc_set_time,
|
|
|
|
.read_alarm = ab8500_rtc_read_alarm,
|
|
|
|
.set_alarm = ab8500_rtc_set_alarm,
|
|
|
|
.alarm_irq_enable = ab8500_rtc_irq_enable,
|
|
|
|
};
|
|
|
|
|
2013-07-04 05:07:45 +07:00
|
|
|
static const struct rtc_class_ops ab8540_rtc_ops = {
|
|
|
|
.read_time = ab8500_rtc_read_time,
|
|
|
|
.set_time = ab8500_rtc_set_time,
|
|
|
|
.read_alarm = ab8500_rtc_read_alarm,
|
|
|
|
.set_alarm = ab8540_rtc_set_alarm,
|
|
|
|
.alarm_irq_enable = ab8500_rtc_irq_enable,
|
|
|
|
};
|
|
|
|
|
2015-05-01 22:44:35 +07:00
|
|
|
static const struct platform_device_id ab85xx_rtc_ids[] = {
|
2013-07-04 05:07:45 +07:00
|
|
|
{ "ab8500-rtc", (kernel_ulong_t)&ab8500_rtc_ops, },
|
|
|
|
{ "ab8540-rtc", (kernel_ulong_t)&ab8540_rtc_ops, },
|
2015-09-04 18:58:05 +07:00
|
|
|
{ /* sentinel */ }
|
2013-07-04 05:07:45 +07:00
|
|
|
};
|
2015-08-27 17:34:32 +07:00
|
|
|
MODULE_DEVICE_TABLE(platform, ab85xx_rtc_ids);
|
2013-07-04 05:07:45 +07:00
|
|
|
|
2012-12-22 04:09:38 +07:00
|
|
|
static int ab8500_rtc_probe(struct platform_device *pdev)
|
2010-05-27 04:42:14 +07:00
|
|
|
{
|
2013-07-04 05:07:45 +07:00
|
|
|
const struct platform_device_id *platid = platform_get_device_id(pdev);
|
2010-05-27 04:42:14 +07:00
|
|
|
int err;
|
|
|
|
struct rtc_device *rtc;
|
2010-09-10 22:47:56 +07:00
|
|
|
u8 rtc_ctrl;
|
2010-05-27 04:42:14 +07:00
|
|
|
int irq;
|
|
|
|
|
|
|
|
irq = platform_get_irq_byname(pdev, "ALARM");
|
|
|
|
if (irq < 0)
|
|
|
|
return irq;
|
|
|
|
|
|
|
|
/* For RTC supply test */
|
2010-09-10 22:47:56 +07:00
|
|
|
err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/* Wait for reset by the PorRtc */
|
2012-01-11 06:10:41 +07:00
|
|
|
usleep_range(1000, 5000);
|
2010-05-27 04:42:14 +07:00
|
|
|
|
2010-09-10 22:47:56 +07:00
|
|
|
err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
|
|
|
|
AB8500_RTC_STAT_REG, &rtc_ctrl);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
/* Check if the RTC Supply fails */
|
|
|
|
if (!(rtc_ctrl & RTC_STATUS_DATA)) {
|
|
|
|
dev_err(&pdev->dev, "RTC supply failure\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2012-01-11 06:10:38 +07:00
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
|
|
|
2013-04-30 06:20:34 +07:00
|
|
|
rtc = devm_rtc_device_register(&pdev->dev, "ab8500-rtc",
|
2013-07-04 05:07:45 +07:00
|
|
|
(struct rtc_class_ops *)platid->driver_data,
|
|
|
|
THIS_MODULE);
|
2010-05-27 04:42:14 +07:00
|
|
|
if (IS_ERR(rtc)) {
|
|
|
|
dev_err(&pdev->dev, "Registration failed\n");
|
|
|
|
err = PTR_ERR(rtc);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2013-04-30 06:20:34 +07:00
|
|
|
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
2015-09-21 22:46:58 +07:00
|
|
|
rtc_alarm_handler, IRQF_ONESHOT,
|
2013-04-30 06:20:34 +07:00
|
|
|
"ab8500-rtc", rtc);
|
|
|
|
if (err < 0)
|
2010-05-27 04:42:14 +07:00
|
|
|
return err;
|
|
|
|
|
2015-09-21 22:46:58 +07:00
|
|
|
dev_pm_set_wake_irq(&pdev->dev, irq);
|
2010-05-27 04:42:14 +07:00
|
|
|
platform_set_drvdata(pdev, rtc);
|
|
|
|
|
2012-01-11 06:10:42 +07:00
|
|
|
err = ab8500_sysfs_rtc_register(&pdev->dev);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&pdev->dev, "sysfs RTC failed to register\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
rtc/ab8500: set uie_unsupported flag
Currently, ab8500 doesn't set uie_unsupported of rtc_device, while it
doesn't support UIE, see ab8500_rtc_set_alarm().
Thus, when going through rtc_update_irq_enable()->rtc_timer_enqueue(),
there's a chance it has an alarm timer1 queued before which is going to
fired, so this update timer2 will be queued because it isn't the leftmost
one, which means rtc_timer_enqueue() will return 0.
This will result in two problems:
1) UIE EMUL will not be used.
2) When the alarm timer1 is fired, in rtc_timer_do_work() timer2 will
fail to set the alarm time, so this rtc will disfunctional due to
timer2 with the earliest expires in the timerqueue.
So, rtc drivers must set this flag if they don't support UIE.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-11 06:54:23 +07:00
|
|
|
rtc->uie_unsupported = 1;
|
|
|
|
|
2010-05-27 04:42:14 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-12-22 04:09:38 +07:00
|
|
|
static int ab8500_rtc_remove(struct platform_device *pdev)
|
2010-05-27 04:42:14 +07:00
|
|
|
{
|
2015-09-21 22:46:58 +07:00
|
|
|
dev_pm_clear_wake_irq(&pdev->dev);
|
|
|
|
device_init_wakeup(&pdev->dev, false);
|
2012-01-11 06:10:42 +07:00
|
|
|
ab8500_sysfs_rtc_unregister(&pdev->dev);
|
|
|
|
|
2010-05-27 04:42:14 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver ab8500_rtc_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "ab8500-rtc",
|
|
|
|
},
|
|
|
|
.probe = ab8500_rtc_probe,
|
2012-12-22 04:09:38 +07:00
|
|
|
.remove = ab8500_rtc_remove,
|
2013-07-04 05:07:45 +07:00
|
|
|
.id_table = ab85xx_rtc_ids,
|
2010-05-27 04:42:14 +07:00
|
|
|
};
|
|
|
|
|
2012-01-11 06:10:48 +07:00
|
|
|
module_platform_driver(ab8500_rtc_driver);
|
2010-05-27 04:42:14 +07:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>");
|
|
|
|
MODULE_DESCRIPTION("AB8500 RTC Driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|