linux_dsm_epyc7002/drivers/media/platform/Kconfig

215 lines
6.0 KiB
Plaintext
Raw Normal View History

#
# Platform drivers
# All drivers here are currently for webcam support
menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
depends on MEDIA_CAMERA_SUPPORT
default n
---help---
Say Y here to enable support for platform-specific V4L drivers.
if V4L_PLATFORM_DRIVERS
source "drivers/media/platform/marvell-ccic/Kconfig"
config VIDEO_VIA_CAMERA
tristate "VIAFB camera controller support"
depends on FB_VIA
select VIDEOBUF_DMA_SG
select VIDEO_OV7670
help
Driver support for the integrated camera controller in VIA
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
with ov7670 sensors.
#
# Platform multimedia device configuration
#
source "drivers/media/platform/davinci/Kconfig"
source "drivers/media/platform/omap/Kconfig"
source "drivers/media/platform/blackfin/Kconfig"
config VIDEO_SH_VOU
tristate "SuperH VOU video output driver"
depends on MEDIA_CAMERA_SUPPORT
depends on VIDEO_DEV && ARCH_SHMOBILE
select VIDEOBUF_DMA_CONTIG
help
Support for the Video Output Unit (VOU) on SuperH SoCs.
config VIDEO_VIU
tristate "Freescale VIU Video Driver"
depends on VIDEO_V4L2 && PPC_MPC512x
select VIDEOBUF_DMA_CONTIG
default y
---help---
Support for Freescale VIU video driver. This device captures
video data, or overlays video on DIU frame buffer.
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
In doubt, say N.
config VIDEO_TIMBERDALE
tristate "Support for timberdale Video In/LogiWIN"
depends on VIDEO_V4L2 && I2C && DMADEVICES
select DMA_ENGINE
select TIMB_DMA
select VIDEO_ADV7180
select VIDEOBUF_DMA_CONTIG
---help---
Add support for the Video In peripherial of the timberdale FPGA.
config VIDEO_VINO
tristate "SGI Vino Video For Linux"
depends on I2C && SGI_IP22 && VIDEO_V4L2
select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to build in support for the Vino video input system found
on SGI Indy machines.
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L2
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
config VIDEO_M32R_AR_M64278
tristate "AR device with color module M64278(VGA)"
depends on PLAT_M32700UT
select VIDEO_M32R_AR
---help---
This is a video4linux driver for the Renesas AR (Artificial
Retina) with M64278E-800 camera module.
This module supports VGA(640x480 pixels) resolutions.
To compile this driver as a module, choose M here: the
module will be called arv.
config VIDEO_OMAP2
tristate "OMAP2 Camera Capture Interface driver"
depends on VIDEO_DEV && ARCH_OMAP2
select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
config VIDEO_OMAP3
tristate "OMAP 3 Camera support (EXPERIMENTAL)"
depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
---help---
Driver for an OMAP 3 camera controller.
config VIDEO_OMAP3_DEBUG
bool "OMAP 3 Camera debug messages"
depends on VIDEO_OMAP3
---help---
Enable debug messages on OMAP 3 camera controller driver.
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/s5p-fimc/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
default n
---help---
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
to capture and output drivers, which use memory buffers for just
one of those.
if V4L_MEM2MEM_DRIVERS
config VIDEO_CODA
tristate "Chips&Media Coda multi-standard codec IP"
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
---help---
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
config VIDEO_MEM2MEM_DEINTERLACE
tristate "Deinterlace support"
depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
Generic deinterlacing V4L2 driver.
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
default n
---help---
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
2d graphics accelerator.
config VIDEO_SAMSUNG_S5P_JPEG
tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
---help---
This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC 5.1 Video Codec"
depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
select VIDEOBUF2_DMA_CONTIG
default n
help
MFC 5.1 driver for V4L2.
config VIDEO_MX2_EMMAPRP
tristate "MX2 eMMa-PrP support"
depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
MX2X chips have a PrP that can be used to process buffers from
memory to memory. Operations include resizing and format
conversion.
endif # V4L_MEM2MEM_DRIVERS
menuconfig V4L_TEST_DRIVERS
bool "Media test drivers"
depends on MEDIA_CAMERA_SUPPORT
if V4L_TEST_DRIVERS
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
select FONT_8x16
select VIDEOBUF2_VMALLOC
default n
---help---
Enables a virtual video driver. This device shows a color bar
and a timestamp, as a real device would generate by using V4L2
api.
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
config VIDEO_MEM2MEM_TESTDEV
tristate "Virtual test device for mem2mem framework"
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
default n
---help---
This is a virtual test device for the memory-to-memory driver
framework.
endif #V4L_TEST_DRIVERS