AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 08:39:31 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f8eb0edeb8
linux_dsm_epyc7002/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt

24 lines
1020 B
Plaintext
Raw Normal View History

arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 16:12:39 +07:00
Tegra SOC USB controllers
The device node for a USB controller that is part of a Tegra
SOC is as described in the document "Open Firmware Recommended
Practice : Universal Serial Bus" with the following modifications
and additions :
Required properties :
Documentation: DT bindings: add more Tegra chip compatible strings Align compatible strings for several IP blocks present on Tegra chips with the latest doctrine from the DT maintainers: http://marc.info/?l=devicetree&m=142255654213019&w=2 The primary objective here is to avoid checkpatch warnings, per: http://marc.info/?l=linux-tegra&m=142201349727836&w=2 DT binding text files have been updated for the following IP blocks: - PCIe - SOR - SoC timers - AHB "gizmo" - APB_MISC - pinmux control - UART - PWM - I2C - SPI - RTC - PMC - eFuse - AHCI - HDA - XUSB_PADCTRL - SDHCI - SOC_THERM - AHUB - I2S - EHCI - USB PHY N.B. The nvidia,tegra20-timer compatible string is removed from the nvidia,tegra30-timer.txt documentation file because it's already mentioned in the nvidia,tegra20-timer.txt documentation file. This second version takes into account the following requests from Rob Herring <robherring2@gmail.com>: - Per-IP block patches have been combined into a single patch - Explicit documentation about which compatible strings are actually matched by the driver has been removed. In its place is implicit documentation that loosely follows Rob's prescribed format: "Must contain '"nvidia,<chip>-pcie", "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ..." [...] "You should attempt to document known values of <chip> if you use it" Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dylan Reid <dgreid@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jingchang Lu <jingchang.lu@freescale.com> Cc: John Crispin <blogic@openwrt.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: "Terje Bergström" <tbergstrom@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-i2c@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-pwm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-31 05:11:04 +07:00
- compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain
"nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
tegra114, tegra124, tegra132, or tegra210.
ARM: tegra: finalize USB EHCI and PHY bindings The existing Tegra USB bindings have a few issues: 1) Many properties are documented as being part of the EHCI controller node, yet they apply more to the PHY device. They should be moved. 2) Some registers in PHY1 are shared with PHY3, and hence PHY3 needs a reg entry to point at PHY1's register space. We can't assume the PHY1 driver is present, so the PHY3 driver will directly access those registers. 3) The list of clocks required by the PHY was missing some required entries. 4) UTMI PHY Timing parameters are added 5) VBUS control is now specified using a regulator rather than a plain GPIO 6) Added nvidia,is-wired property to indicate whether the device is hard wired on the board, or pluggable. This patch fixes the binding definition to resolve these issues. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 21:12:55 +07:00
- nvidia,phy : phandle of the PHY that the controller is connected to.
ARM: tegra: add missing clock documentation to DT bindings Many of the Tegra DT binding documents say nothing about the clocks or clock-names properties, yet those are present and required in DT files. This patch simply updates the documentation file to match the implicit definition of the binding, based on real-world DT content. All Tegra bindings that mention clocks are updated to have consistent wording and formatting of the clock-related properties. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-07 04:00:25 +07:00
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
ARM: tegra: document reset properties in DT bindings Update all the Tegra DT bindings to require resets/reset-names properties where the HW module has reset inputs. Remove any entries from clocks or clock-names that were only required to identify reset inputs, rather than referring to real clocks. This is a DT-ABI-incompatible change. It is the first of two changes required for me to consider the Tegra DT bindings as stable, the other being conversion to the common DMA DT bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-11-08 00:11:27 +07:00
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- usb
ARM: tegra: add USB ULPI PHY reset GPIO to device tree ULPI PHYs have a reset signal, and different boards use a different GPIO for this task. Add a property to device tree to represent this. I'm not sure if adding this property to the EHCI controller node is entirely correct; perhaps eventually we should have explicit separate nodes for the various PHYs. However, we don't have that right now, so this binding seems like a reasonable choice. Cc: <devicetree-discuss@lists.ozlabs.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-13 04:46:49 +07:00
arm: tegra: dts: Support host/device selection and legacy mode Some USB ports can support host and device operation. We add the dr_mode property (as found in Freescale) for this. One USB port has a 'legacy mode', left over from the days of pre-Tegra chips. I don't believe this is actually used, except that we must know to turn this off in the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07 12:04:32 +07:00
Optional properties:
ARM: tegra: finalize USB EHCI and PHY bindings The existing Tegra USB bindings have a few issues: 1) Many properties are documented as being part of the EHCI controller node, yet they apply more to the PHY device. They should be moved. 2) Some registers in PHY1 are shared with PHY3, and hence PHY3 needs a reg entry to point at PHY1's register space. We can't assume the PHY1 driver is present, so the PHY3 driver will directly access those registers. 3) The list of clocks required by the PHY was missing some required entries. 4) UTMI PHY Timing parameters are added 5) VBUS control is now specified using a regulator rather than a plain GPIO 6) Added nvidia,is-wired property to indicate whether the device is hard wired on the board, or pluggable. This patch fixes the binding definition to resolve these issues. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 21:12:55 +07:00
- nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
USB ports, which need reset twice due to hardware issues.
Reference in New Issue Copy Permalink