linux_dsm_epyc7002/include/uapi/linux/if_bonding.h

166 lines
5.1 KiB
C
Raw Normal View History

License cleanup: add SPDX license identifier to uapi header files with a license Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:09:13 +07:00
/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */
/*
* Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
*
*
* Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
* NCM: Network and Communications Management, Inc.
*
* BUT, I'm the one who modified it for ethernet, so:
* (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
*
* This software may be used and distributed according to the terms
* of the GNU Public License, incorporated herein by reference.
*
* 2003/03/18 - Amir Noam <amir.noam at intel dot com>
* - Added support for getting slave's speed and duplex via ethtool.
* Needed for 802.3ad and other future modes.
*
* 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
* Shmulik Hen <shmulik.hen at intel dot com>
* - Enable support of modes that need to use the unique mac address of
* each slave.
*
* 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
* Amir Noam <amir.noam at intel dot com>
* - Moved driver's private data types to bonding.h
*
* 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
* Tsippy Mendelson <tsippy.mendelson at intel dot com> and
* Shmulik Hen <shmulik.hen at intel dot com>
* - Added support for IEEE 802.3ad Dynamic link aggregation mode.
*
* 2003/05/01 - Amir Noam <amir.noam at intel dot com>
* - Added ABI version control to restore compatibility between
* new/old ifenslave and new/old bonding.
*
* 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Code cleanup and style changes
*
* 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
* - added definitions for various XOR hashing policies
*/
#ifndef _LINUX_IF_BONDING_H
#define _LINUX_IF_BONDING_H
#include <linux/if.h>
#include <linux/types.h>
#include <linux/if_ether.h>
/* userland - kernel ABI version (2003/05/08) */
#define BOND_ABI_VERSION 2
/*
* We can remove these ioctl definitions in 2.5. People should use the
* SIOC*** versions of them instead
*/
#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE)
#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1)
#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2)
#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11)
#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12)
#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13)
#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY)
#define BOND_MODE_ROUNDROBIN 0
#define BOND_MODE_ACTIVEBACKUP 1
#define BOND_MODE_XOR 2
#define BOND_MODE_BROADCAST 3
#define BOND_MODE_8023AD 4
#define BOND_MODE_TLB 5
#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */
/* each slave's link has 4 states */
#define BOND_LINK_UP 0 /* link is up and running */
#define BOND_LINK_FAIL 1 /* link has just gone down */
#define BOND_LINK_DOWN 2 /* link has been down for too long time */
#define BOND_LINK_BACK 3 /* link is going back */
/* each slave has several states */
#define BOND_STATE_ACTIVE 0 /* link is active */
#define BOND_STATE_BACKUP 1 /* link is backup */
#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */
bonding: allow user-controlled output slave selection v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 15:40:18 +07:00
#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */
#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */
/* hashing types */
#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */
#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */
#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */
bonding: modify the old and add new xmit hash policies This patch adds two new hash policy modes which use skb_flow_dissect: 3 - Encapsulated layer 2+3 4 - Encapsulated layer 3+4 There should be a good improvement for tunnel users in those modes. It also changes the old hash functions to: hash ^= (__force u32)flow.dst ^ (__force u32)flow.src; hash ^= (hash >> 16); hash ^= (hash >> 8); Where hash will be initialized either to L2 hash, that is SRCMAC[5] XOR DSTMAC[5], or to flow->ports which should be extracted from the upper layer. Flow's dst and src are also extracted based on the xmit policy either directly from the buffer or by using skb_flow_dissect, but in both cases if the protocol is IPv6 then dst and src are obtained by ipv6_addr_hash() on the real addresses. In case of a non-dissectable packet, the algorithms fall back to L2 hashing. The bond_set_mode_ops() function is now obsolete and thus deleted because it was used only to set the proper hash policy. Also we trim a pointer from struct bonding because we no longer need to keep the hash function, now there's only a single hash function - bond_xmit_hash that works based on bond->params.xmit_policy. The hash function and skb_flow_dissect were suggested by Eric Dumazet. The layer names were suggested by Andy Gospodarek, because I suck at semantics. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 18:39:25 +07:00
#define BOND_XMIT_POLICY_ENCAP23 3 /* encapsulated layer 2+3 */
#define BOND_XMIT_POLICY_ENCAP34 4 /* encapsulated layer 3+4 */
/* 802.3ad port state definitions (43.4.2.2 in the 802.3ad standard) */
#define LACP_STATE_LACP_ACTIVITY 0x1
#define LACP_STATE_LACP_TIMEOUT 0x2
#define LACP_STATE_AGGREGATION 0x4
#define LACP_STATE_SYNCHRONIZATION 0x8
#define LACP_STATE_COLLECTING 0x10
#define LACP_STATE_DISTRIBUTING 0x20
#define LACP_STATE_DEFAULTED 0x40
#define LACP_STATE_EXPIRED 0x80
typedef struct ifbond {
__s32 bond_mode;
__s32 num_slaves;
__s32 miimon;
} ifbond;
typedef struct ifslave {
__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
char slave_name[IFNAMSIZ];
__s8 link;
__s8 state;
__u32 link_failure_count;
} ifslave;
struct ad_info {
__u16 aggregator_id;
__u16 ports;
__u16 actor_key;
__u16 partner_key;
__u8 partner_system[ETH_ALEN];
};
/* Embedded inside LINK_XSTATS_TYPE_BOND */
enum {
BOND_XSTATS_UNSPEC,
BOND_XSTATS_3AD,
__BOND_XSTATS_MAX
};
#define BOND_XSTATS_MAX (__BOND_XSTATS_MAX - 1)
/* Embedded inside BOND_XSTATS_3AD */
enum {
BOND_3AD_STAT_LACPDU_RX,
BOND_3AD_STAT_LACPDU_TX,
BOND_3AD_STAT_LACPDU_UNKNOWN_RX,
BOND_3AD_STAT_LACPDU_ILLEGAL_RX,
BOND_3AD_STAT_MARKER_RX,
BOND_3AD_STAT_MARKER_TX,
BOND_3AD_STAT_MARKER_RESP_RX,
BOND_3AD_STAT_MARKER_RESP_TX,
BOND_3AD_STAT_MARKER_UNKNOWN_RX,
BOND_3AD_STAT_PAD,
__BOND_3AD_STAT_MAX
};
#define BOND_3AD_STAT_MAX (__BOND_3AD_STAT_MAX - 1)
#endif /* _LINUX_IF_BONDING_H */
/*
* Local variables:
* version-control: t
* kept-new-versions: 5
* c-indent-level: 8
* c-basic-offset: 8
* tab-width: 8
* End:
*/