linux_dsm_epyc7002/drivers/platform/x86/hp-wmi.c

639 lines
16 KiB
C
Raw Normal View History

/*
* HP WMI hotkeys
*
* Copyright (C) 2008 Red Hat <mjg@redhat.com>
*
* Portions based on wistron_btns.c:
* Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
* Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
* Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/input.h>
#include <acpi/acpi_drivers.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/rfkill.h>
#include <linux/string.h>
MODULE_AUTHOR("Matthew Garrett <mjg59@srcf.ucam.org>");
MODULE_DESCRIPTION("HP laptop WMI hotkeys driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C");
MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
#define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"
#define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
#define PREFIX "HP WMI: "
enum hp_wmi_radio {
HPWMI_WIFI = 0,
HPWMI_BLUETOOTH = 1,
HPWMI_WWAN = 2,
};
enum hp_wmi_event_ids {
HPWMI_DOCK_EVENT = 1,
HPWMI_BEZEL_BUTTON = 4,
HPWMI_WIRELESS = 5,
};
static int __devinit hp_wmi_bios_setup(struct platform_device *device);
static int __exit hp_wmi_bios_remove(struct platform_device *device);
static int hp_wmi_resume_handler(struct device *device);
struct bios_args {
u32 signature;
u32 command;
u32 commandtype;
u32 datasize;
u32 data;
};
struct bios_return {
u32 sigpass;
u32 return_code;
u32 value;
};
struct key_entry {
char type; /* See KE_* below */
u16 code;
u16 keycode;
};
enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
{KE_KEY, 0x20e8, KEY_MEDIA},
{KE_KEY, 0x2142, KEY_MEDIA},
{KE_KEY, 0x213b, KEY_INFO},
{KE_KEY, 0x2169, KEY_DIRECTION},
{KE_KEY, 0x231b, KEY_HELP},
{KE_END, 0}
};
static struct input_dev *hp_wmi_input_dev;
static struct platform_device *hp_wmi_platform_dev;
static struct rfkill *wifi_rfkill;
static struct rfkill *bluetooth_rfkill;
static struct rfkill *wwan_rfkill;
static const struct dev_pm_ops hp_wmi_pm_ops = {
.resume = hp_wmi_resume_handler,
.restore = hp_wmi_resume_handler,
};
static struct platform_driver hp_wmi_driver = {
.driver = {
.name = "hp-wmi",
.owner = THIS_MODULE,
.pm = &hp_wmi_pm_ops,
},
.probe = hp_wmi_bios_setup,
.remove = hp_wmi_bios_remove,
};
static int hp_wmi_perform_query(int query, int write, int value)
{
struct bios_return bios_return;
acpi_status status;
union acpi_object *obj;
struct bios_args args = {
.signature = 0x55434553,
.command = write ? 0x2 : 0x1,
.commandtype = query,
.datasize = write ? 0x4 : 0,
.data = value,
};
struct acpi_buffer input = { sizeof(struct bios_args), &args };
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
status = wmi_evaluate_method(HPWMI_BIOS_GUID, 0, 0x3, &input, &output);
obj = output.pointer;
if (!obj)
return -EINVAL;
else if (obj->type != ACPI_TYPE_BUFFER) {
kfree(obj);
return -EINVAL;
}
bios_return = *((struct bios_return *)obj->buffer.pointer);
kfree(obj);
if (bios_return.return_code > 0)
return bios_return.return_code * -1;
else
return bios_return.value;
}
static int hp_wmi_display_state(void)
{
return hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, 0);
}
static int hp_wmi_hddtemp_state(void)
{
return hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, 0);
}
static int hp_wmi_als_state(void)
{
return hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, 0);
}
static int hp_wmi_dock_state(void)
{
int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
if (ret < 0)
return ret;
return ret & 0x1;
}
static int hp_wmi_tablet_state(void)
{
int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
if (ret < 0)
return ret;
return (ret & 0x4) ? 1 : 0;
}
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
static int hp_wmi_set_block(void *data, bool blocked)
{
enum hp_wmi_radio r = (enum hp_wmi_radio) data;
int query = BIT(r + 8) | ((!blocked) << r);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
}
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
static const struct rfkill_ops hp_wmi_rfkill_ops = {
.set_block = hp_wmi_set_block,
};
static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
{
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
int mask = 0x200 << (r * 8);
if (wireless & mask)
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
return false;
else
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
return true;
}
static bool hp_wmi_get_hw_state(enum hp_wmi_radio r)
{
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
int mask = 0x800 << (r * 8);
if (wireless & mask)
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
return false;
else
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
return true;
}
static ssize_t show_display(struct device *dev, struct device_attribute *attr,
char *buf)
{
int value = hp_wmi_display_state();
if (value < 0)
return -EINVAL;
return sprintf(buf, "%d\n", value);
}
static ssize_t show_hddtemp(struct device *dev, struct device_attribute *attr,
char *buf)
{
int value = hp_wmi_hddtemp_state();
if (value < 0)
return -EINVAL;
return sprintf(buf, "%d\n", value);
}
static ssize_t show_als(struct device *dev, struct device_attribute *attr,
char *buf)
{
int value = hp_wmi_als_state();
if (value < 0)
return -EINVAL;
return sprintf(buf, "%d\n", value);
}
static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
char *buf)
{
int value = hp_wmi_dock_state();
if (value < 0)
return -EINVAL;
return sprintf(buf, "%d\n", value);
}
static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
char *buf)
{
int value = hp_wmi_tablet_state();
if (value < 0)
return -EINVAL;
return sprintf(buf, "%d\n", value);
}
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
u32 tmp = simple_strtoul(buf, NULL, 10);
hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, tmp);
return count;
}
static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(unsigned int code)
{
struct key_entry *key;
for (key = hp_wmi_keymap; key->type != KE_END; key++)
if (code == key->code)
return key;
return NULL;
}
static struct key_entry *hp_wmi_get_entry_by_keycode(unsigned int keycode)
{
struct key_entry *key;
for (key = hp_wmi_keymap; key->type != KE_END; key++)
if (key->type == KE_KEY && keycode == key->keycode)
return key;
return NULL;
}
static int hp_wmi_getkeycode(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode)
{
struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
if (key && key->type == KE_KEY) {
*keycode = key->keycode;
return 0;
}
return -EINVAL;
}
static int hp_wmi_setkeycode(struct input_dev *dev,
unsigned int scancode, unsigned int keycode)
{
struct key_entry *key;
unsigned int old_keycode;
key = hp_wmi_get_entry_by_scancode(scancode);
if (key && key->type == KE_KEY) {
old_keycode = key->keycode;
key->keycode = keycode;
set_bit(keycode, dev->keybit);
if (!hp_wmi_get_entry_by_keycode(old_keycode))
clear_bit(old_keycode, dev->keybit);
return 0;
}
return -EINVAL;
}
static void hp_wmi_notify(u32 value, void *context)
{
struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
static struct key_entry *key;
union acpi_object *obj;
int eventcode, key_code;
acpi_status status;
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
printk(KERN_INFO PREFIX "bad event status 0x%x\n", status);
return;
}
obj = (union acpi_object *)response.pointer;
if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) {
printk(KERN_INFO PREFIX "Unknown response received\n");
kfree(obj);
return;
}
eventcode = *((u8 *) obj->buffer.pointer);
kfree(obj);
switch (eventcode) {
case HPWMI_DOCK_EVENT:
input_report_switch(hp_wmi_input_dev, SW_DOCK,
hp_wmi_dock_state());
input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
hp_wmi_tablet_state());
input_sync(hp_wmi_input_dev);
break;
case HPWMI_BEZEL_BUTTON:
key_code = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
0);
key = hp_wmi_get_entry_by_scancode(key_code);
if (key) {
switch (key->type) {
case KE_KEY:
input_report_key(hp_wmi_input_dev,
key->keycode, 1);
input_sync(hp_wmi_input_dev);
input_report_key(hp_wmi_input_dev,
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
}
} else
printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n",
key_code);
break;
case HPWMI_WIRELESS:
if (wifi_rfkill)
rfkill_set_states(wifi_rfkill,
hp_wmi_get_sw_state(HPWMI_WIFI),
hp_wmi_get_hw_state(HPWMI_WIFI));
if (bluetooth_rfkill)
rfkill_set_states(bluetooth_rfkill,
hp_wmi_get_sw_state(HPWMI_BLUETOOTH),
hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
if (wwan_rfkill)
rfkill_set_states(wwan_rfkill,
hp_wmi_get_sw_state(HPWMI_WWAN),
hp_wmi_get_hw_state(HPWMI_WWAN));
break;
default:
printk(KERN_INFO PREFIX "Unknown eventcode - %d\n",
eventcode);
break;
}
}
static int __init hp_wmi_input_setup(void)
{
struct key_entry *key;
int err;
hp_wmi_input_dev = input_allocate_device();
hp_wmi_input_dev->name = "HP WMI hotkeys";
hp_wmi_input_dev->phys = "wmi/input0";
hp_wmi_input_dev->id.bustype = BUS_HOST;
hp_wmi_input_dev->getkeycode = hp_wmi_getkeycode;
hp_wmi_input_dev->setkeycode = hp_wmi_setkeycode;
for (key = hp_wmi_keymap; key->type != KE_END; key++) {
switch (key->type) {
case KE_KEY:
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
}
}
set_bit(EV_SW, hp_wmi_input_dev->evbit);
set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
/* Set initial hardware state */
input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
hp_wmi_tablet_state());
input_sync(hp_wmi_input_dev);
err = input_register_device(hp_wmi_input_dev);
if (err) {
input_free_device(hp_wmi_input_dev);
return err;
}
return 0;
}
static void cleanup_sysfs(struct platform_device *device)
{
device_remove_file(&device->dev, &dev_attr_display);
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __devinit hp_wmi_bios_setup(struct platform_device *device)
{
int err;
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
err = device_create_file(&device->dev, &dev_attr_display);
if (err)
goto add_sysfs_error;
err = device_create_file(&device->dev, &dev_attr_hddtemp);
if (err)
goto add_sysfs_error;
err = device_create_file(&device->dev, &dev_attr_als);
if (err)
goto add_sysfs_error;
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
err = device_create_file(&device->dev, &dev_attr_tablet);
if (err)
goto add_sysfs_error;
if (wireless & 0x1) {
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
RFKILL_TYPE_WLAN,
&hp_wmi_rfkill_ops,
(void *) HPWMI_WIFI);
rfkill_init_sw_state(wifi_rfkill,
hp_wmi_get_sw_state(HPWMI_WIFI));
rfkill_set_hw_state(wifi_rfkill,
hp_wmi_get_hw_state(HPWMI_WIFI));
err = rfkill_register(wifi_rfkill);
if (err)
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
goto register_wifi_error;
}
if (wireless & 0x2) {
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev,
RFKILL_TYPE_BLUETOOTH,
&hp_wmi_rfkill_ops,
(void *) HPWMI_BLUETOOTH);
rfkill_init_sw_state(bluetooth_rfkill,
hp_wmi_get_sw_state(HPWMI_BLUETOOTH));
rfkill_set_hw_state(bluetooth_rfkill,
hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
err = rfkill_register(bluetooth_rfkill);
if (err)
goto register_bluetooth_error;
}
if (wireless & 0x4) {
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev,
RFKILL_TYPE_WWAN,
&hp_wmi_rfkill_ops,
(void *) HPWMI_WWAN);
rfkill_init_sw_state(wwan_rfkill,
hp_wmi_get_sw_state(HPWMI_WWAN));
rfkill_set_hw_state(wwan_rfkill,
hp_wmi_get_hw_state(HPWMI_WWAN));
err = rfkill_register(wwan_rfkill);
if (err)
goto register_wwan_err;
}
return 0;
register_wwan_err:
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
rfkill_destroy(wwan_rfkill);
if (bluetooth_rfkill)
rfkill_unregister(bluetooth_rfkill);
register_bluetooth_error:
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
rfkill_destroy(bluetooth_rfkill);
if (wifi_rfkill)
rfkill_unregister(wifi_rfkill);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
register_wifi_error:
rfkill_destroy(wifi_rfkill);
add_sysfs_error:
cleanup_sysfs(device);
return err;
}
static int __exit hp_wmi_bios_remove(struct platform_device *device)
{
cleanup_sysfs(device);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
if (wifi_rfkill) {
rfkill_unregister(wifi_rfkill);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
rfkill_destroy(wifi_rfkill);
}
if (bluetooth_rfkill) {
rfkill_unregister(bluetooth_rfkill);
rfkill_destroy(bluetooth_rfkill);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
}
if (wwan_rfkill) {
rfkill_unregister(wwan_rfkill);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 18:01:37 +07:00
rfkill_destroy(wwan_rfkill);
}
return 0;
}
static int hp_wmi_resume_handler(struct device *device)
{
/*
* Hardware state may have changed while suspended, so trigger
* input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
if (hp_wmi_input_dev) {
input_report_switch(hp_wmi_input_dev, SW_DOCK,
hp_wmi_dock_state());
input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
hp_wmi_tablet_state());
input_sync(hp_wmi_input_dev);
}
if (wifi_rfkill)
rfkill_set_states(wifi_rfkill,
hp_wmi_get_sw_state(HPWMI_WIFI),
hp_wmi_get_hw_state(HPWMI_WIFI));
if (bluetooth_rfkill)
rfkill_set_states(bluetooth_rfkill,
hp_wmi_get_sw_state(HPWMI_BLUETOOTH),
hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
if (wwan_rfkill)
rfkill_set_states(wwan_rfkill,
hp_wmi_get_sw_state(HPWMI_WWAN),
hp_wmi_get_hw_state(HPWMI_WWAN));
return 0;
}
static int __init hp_wmi_init(void)
{
int err;
if (wmi_has_guid(HPWMI_EVENT_GUID)) {
err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
hp_wmi_notify, NULL);
if (ACPI_SUCCESS(err))
hp_wmi_input_setup();
}
if (wmi_has_guid(HPWMI_BIOS_GUID)) {
err = platform_driver_register(&hp_wmi_driver);
if (err)
return 0;
hp_wmi_platform_dev = platform_device_alloc("hp-wmi", -1);
if (!hp_wmi_platform_dev) {
platform_driver_unregister(&hp_wmi_driver);
return 0;
}
platform_device_add(hp_wmi_platform_dev);
}
return 0;
}
static void __exit hp_wmi_exit(void)
{
if (wmi_has_guid(HPWMI_EVENT_GUID)) {
wmi_remove_notify_handler(HPWMI_EVENT_GUID);
input_unregister_device(hp_wmi_input_dev);
}
if (hp_wmi_platform_dev) {
platform_device_del(hp_wmi_platform_dev);
platform_driver_unregister(&hp_wmi_driver);
}
}
module_init(hp_wmi_init);
module_exit(hp_wmi_exit);