AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 05:49:33 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
f560cda91b
linux_dsm_epyc7002/arch/x86/kvm/kvm_cache_regs.h

181 lines
4.7 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
#ifndef ASM_KVM_CACHE_REGS_H
#define ASM_KVM_CACHE_REGS_H
KVM: x86: Add requisite includes to kvm_cache_regs.h Until this point vmx.c has been the only consumer and included the file after many others. Prepare for multiple consumers, i.e. the shattering of vmx.c Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-04 04:52:54 +07:00
#include <linux/kvm_host.h>
KVM: Optimize kvm_read_cr[04]_bits() 'mask' is always a constant, so we can check whether it includes a bit that might be owned by the guest very cheaply, and avoid the decache call. Saves a few hundred bytes of module text. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-01-21 20:31:51 +07:00
#define KVM_POSSIBLE_CR0_GUEST_BITS X86_CR0_TS
#define KVM_POSSIBLE_CR4_GUEST_BITS \
(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR \
KVM: MMU: Expose the LA57 feature to VM. This patch exposes 5 level page table feature to the VM. At the same time, the canonical virtual address checking is extended to support both 48-bits and 57-bits address width. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24 19:27:56 +07:00
| X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_PGE)
KVM: Optimize kvm_read_cr[04]_bits() 'mask' is always a constant, so we can check whether it includes a bit that might be owned by the guest very cheaply, and avoid the decache call. Saves a few hundred bytes of module text. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-01-21 20:31:51 +07:00
KVM: x86: Omit caching logic for always-available GPRs Except for RSP and RIP, which are held in VMX's VMCS, GPRs are always treated "available and dirtly" on both VMX and SVM, i.e. are unconditionally loaded/saved immediately before/after VM-Enter/VM-Exit. Eliminating the unnecessary caching code reduces the size of KVM by a non-trivial amount, much of which comes from the most common code paths. E.g. on x86_64, kvm_emulate_cpuid() is reduced from 342 to 182 bytes and kvm_emulate_hypercall() from 1362 to 1143, with the total size of KVM dropping by ~1000 bytes. With CONFIG_RETPOLINE=y, the numbers are even more pronounced, e.g.: 353->182, 1418->1172 and well over 2000 bytes. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-01 00:36:17 +07:00
#define BUILD_KVM_GPR_ACCESSORS(lname, uname) \
static __always_inline unsigned long kvm_##lname##_read(struct kvm_vcpu *vcpu)\
{ \
return vcpu->arch.regs[VCPU_REGS_##uname]; \
} \
static __always_inline void kvm_##lname##_write(struct kvm_vcpu *vcpu, \
unsigned long val) \
{ \
vcpu->arch.regs[VCPU_REGS_##uname] = val; \
}
BUILD_KVM_GPR_ACCESSORS(rax, RAX)
BUILD_KVM_GPR_ACCESSORS(rbx, RBX)
BUILD_KVM_GPR_ACCESSORS(rcx, RCX)
BUILD_KVM_GPR_ACCESSORS(rdx, RDX)
BUILD_KVM_GPR_ACCESSORS(rbp, RBP)
BUILD_KVM_GPR_ACCESSORS(rsi, RSI)
BUILD_KVM_GPR_ACCESSORS(rdi, RDI)
#ifdef CONFIG_X86_64
BUILD_KVM_GPR_ACCESSORS(r8, R8)
BUILD_KVM_GPR_ACCESSORS(r9, R9)
BUILD_KVM_GPR_ACCESSORS(r10, R10)
BUILD_KVM_GPR_ACCESSORS(r11, R11)
BUILD_KVM_GPR_ACCESSORS(r12, R12)
BUILD_KVM_GPR_ACCESSORS(r13, R13)
BUILD_KVM_GPR_ACCESSORS(r14, R14)
BUILD_KVM_GPR_ACCESSORS(r15, R15)
#endif
KVM: x86: Add helpers to test/mark reg availability and dirtiness Add helpers to prettify code that tests and/or marks whether or not a register is available and/or dirty. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:22 +07:00
static inline bool kvm_register_is_available(struct kvm_vcpu *vcpu,
enum kvm_reg reg)
{
return test_bit(reg, (unsigned long *)&vcpu->arch.regs_avail);
}
static inline bool kvm_register_is_dirty(struct kvm_vcpu *vcpu,
enum kvm_reg reg)
{
return test_bit(reg, (unsigned long *)&vcpu->arch.regs_dirty);
}
static inline void kvm_register_mark_available(struct kvm_vcpu *vcpu,
enum kvm_reg reg)
{
__set_bit(reg, (unsigned long *)&vcpu->arch.regs_avail);
}
static inline void kvm_register_mark_dirty(struct kvm_vcpu *vcpu,
enum kvm_reg reg)
{
__set_bit(reg, (unsigned long *)&vcpu->arch.regs_avail);
__set_bit(reg, (unsigned long *)&vcpu->arch.regs_dirty);
}
KVM: x86: Add WARNs to detect out-of-bounds register indices Add WARN_ON_ONCE() checks in kvm_register_{read,write}() to detect reg values that would cause KVM to overflow vcpu->arch.regs. Change the reg param to an 'int' to make it clear that the reg index is unverified. Regarding the overhead of WARN_ON_ONCE(), now that all fixed GPR reads and writes use dedicated accessors, e.g. kvm_rax_read(), the overhead is limited to flows where the reg index is generated at runtime. And there is at least one historical bug where KVM has generated an out-of- bounds access to arch.regs (see commit b68f3cc7d9789, "KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels"). Adding the WARN_ON_ONCE() protection paves the way for additional cleanup related to kvm_reg and kvm_reg_ex. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:20 +07:00
static inline unsigned long kvm_register_read(struct kvm_vcpu *vcpu, int reg)
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
{
KVM: x86: Add WARNs to detect out-of-bounds register indices Add WARN_ON_ONCE() checks in kvm_register_{read,write}() to detect reg values that would cause KVM to overflow vcpu->arch.regs. Change the reg param to an 'int' to make it clear that the reg index is unverified. Regarding the overhead of WARN_ON_ONCE(), now that all fixed GPR reads and writes use dedicated accessors, e.g. kvm_rax_read(), the overhead is limited to flows where the reg index is generated at runtime. And there is at least one historical bug where KVM has generated an out-of- bounds access to arch.regs (see commit b68f3cc7d9789, "KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels"). Adding the WARN_ON_ONCE() protection paves the way for additional cleanup related to kvm_reg and kvm_reg_ex. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:20 +07:00
if (WARN_ON_ONCE((unsigned int)reg >= NR_VCPU_REGS))
return 0;
KVM: x86: Add helpers to test/mark reg availability and dirtiness Add helpers to prettify code that tests and/or marks whether or not a register is available and/or dirty. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:22 +07:00
if (!kvm_register_is_available(vcpu, reg))
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-22 03:26:00 +07:00
kvm_x86_ops.cache_reg(vcpu, reg);
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
return vcpu->arch.regs[reg];
}
KVM: x86: Add WARNs to detect out-of-bounds register indices Add WARN_ON_ONCE() checks in kvm_register_{read,write}() to detect reg values that would cause KVM to overflow vcpu->arch.regs. Change the reg param to an 'int' to make it clear that the reg index is unverified. Regarding the overhead of WARN_ON_ONCE(), now that all fixed GPR reads and writes use dedicated accessors, e.g. kvm_rax_read(), the overhead is limited to flows where the reg index is generated at runtime. And there is at least one historical bug where KVM has generated an out-of- bounds access to arch.regs (see commit b68f3cc7d9789, "KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels"). Adding the WARN_ON_ONCE() protection paves the way for additional cleanup related to kvm_reg and kvm_reg_ex. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:20 +07:00
static inline void kvm_register_write(struct kvm_vcpu *vcpu, int reg,
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
unsigned long val)
{
KVM: x86: Add WARNs to detect out-of-bounds register indices Add WARN_ON_ONCE() checks in kvm_register_{read,write}() to detect reg values that would cause KVM to overflow vcpu->arch.regs. Change the reg param to an 'int' to make it clear that the reg index is unverified. Regarding the overhead of WARN_ON_ONCE(), now that all fixed GPR reads and writes use dedicated accessors, e.g. kvm_rax_read(), the overhead is limited to flows where the reg index is generated at runtime. And there is at least one historical bug where KVM has generated an out-of- bounds access to arch.regs (see commit b68f3cc7d9789, "KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels"). Adding the WARN_ON_ONCE() protection paves the way for additional cleanup related to kvm_reg and kvm_reg_ex. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:20 +07:00
if (WARN_ON_ONCE((unsigned int)reg >= NR_VCPU_REGS))
return;
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
vcpu->arch.regs[reg] = val;
KVM: x86: Add helpers to test/mark reg availability and dirtiness Add helpers to prettify code that tests and/or marks whether or not a register is available and/or dirty. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:22 +07:00
kvm_register_mark_dirty(vcpu, reg);
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
}
static inline unsigned long kvm_rip_read(struct kvm_vcpu *vcpu)
{
return kvm_register_read(vcpu, VCPU_REGS_RIP);
}
static inline void kvm_rip_write(struct kvm_vcpu *vcpu, unsigned long val)
{
kvm_register_write(vcpu, VCPU_REGS_RIP, val);
}
KVM: x86: use direct accessors for RIP and RSP Use specific inline functions for RIP and RSP instead of going through kvm_register_read and kvm_register_write, which are quite a mouthful. kvm_rsp_read and kvm_rsp_write did not exist, so add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-01 03:07:26 +07:00
static inline unsigned long kvm_rsp_read(struct kvm_vcpu *vcpu)
{
return kvm_register_read(vcpu, VCPU_REGS_RSP);
}
static inline void kvm_rsp_write(struct kvm_vcpu *vcpu, unsigned long val)
{
kvm_register_write(vcpu, VCPU_REGS_RSP, val);
}
KVM: Cache pdptrs Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx, guest memory access on svm) extract them on demand. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-01 02:58:47 +07:00
static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
{
KVM: kvm_pdptr_read() may sleep Annotate it thusly. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-04 17:00:55 +07:00
might_sleep(); /* on svm */
KVM: x86: Add helpers to test/mark reg availability and dirtiness Add helpers to prettify code that tests and/or marks whether or not a register is available and/or dirty. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:22 +07:00
if (!kvm_register_is_available(vcpu, VCPU_EXREG_PDPTR))
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-22 03:26:00 +07:00
kvm_x86_ops.cache_reg(vcpu, VCPU_EXREG_PDPTR);
KVM: Cache pdptrs Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx, guest memory access on svm) extract them on demand. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-01 02:58:47 +07:00
KVM: MMU: Add kvm_mmu parameter to load_pdptrs function This function need to be able to load the pdptrs from any mmu context currently in use. So change this function to take an kvm_mmu parameter to fit these needs. As a side effect this patch also moves the cached pdptrs from vcpu_arch into the kvm_mmu struct. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-09-10 22:30:57 +07:00
return vcpu->arch.walk_mmu->pdptrs[index];
KVM: Cache pdptrs Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx, guest memory access on svm) extract them on demand. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-01 02:58:47 +07:00
}
KVM: Replace read accesses of vcpu->arch.cr0 by an accessor Since we'd like to allow the guest to own a few bits of cr0 at times, we need to know when we access those bits. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-29 23:07:30 +07:00
static inline ulong kvm_read_cr0_bits(struct kvm_vcpu *vcpu, ulong mask)
{
KVM: Optimize kvm_read_cr[04]_bits() 'mask' is always a constant, so we can check whether it includes a bit that might be owned by the guest very cheaply, and avoid the decache call. Saves a few hundred bytes of module text. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-01-21 20:31:51 +07:00
ulong tmask = mask & KVM_POSSIBLE_CR0_GUEST_BITS;
if (tmask & vcpu->arch.cr0_guest_owned_bits)
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-22 03:26:00 +07:00
kvm_x86_ops.decache_cr0_guest_bits(vcpu);
KVM: Replace read accesses of vcpu->arch.cr0 by an accessor Since we'd like to allow the guest to own a few bits of cr0 at times, we need to know when we access those bits. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-29 23:07:30 +07:00
return vcpu->arch.cr0 & mask;
}
static inline ulong kvm_read_cr0(struct kvm_vcpu *vcpu)
{
return kvm_read_cr0_bits(vcpu, ~0UL);
}
KVM: Add accessor for reading cr4 (or some bits of cr4) Some bits of cr4 can be owned by the guest on vmx, so when we read them, we copy them to the vcpu structure. In preparation for making the set of guest-owned bits dynamic, use helpers to access these bits so we don't need to know where the bit resides. No changes to svm since all bits are host-owned there. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-07 17:16:48 +07:00
static inline ulong kvm_read_cr4_bits(struct kvm_vcpu *vcpu, ulong mask)
{
KVM: Optimize kvm_read_cr[04]_bits() 'mask' is always a constant, so we can check whether it includes a bit that might be owned by the guest very cheaply, and avoid the decache call. Saves a few hundred bytes of module text. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-01-21 20:31:51 +07:00
ulong tmask = mask & KVM_POSSIBLE_CR4_GUEST_BITS;
if (tmask & vcpu->arch.cr4_guest_owned_bits)
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-22 03:26:00 +07:00
kvm_x86_ops.decache_cr4_guest_bits(vcpu);
KVM: Add accessor for reading cr4 (or some bits of cr4) Some bits of cr4 can be owned by the guest on vmx, so when we read them, we copy them to the vcpu structure. In preparation for making the set of guest-owned bits dynamic, use helpers to access these bits so we don't need to know where the bit resides. No changes to svm since all bits are host-owned there. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-07 17:16:48 +07:00
return vcpu->arch.cr4 & mask;
}
KVM: Replace reads of vcpu->arch.cr3 by an accessor This allows us to keep cr3 in the VMCS, later on. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-05 22:30:00 +07:00
static inline ulong kvm_read_cr3(struct kvm_vcpu *vcpu)
{
KVM: x86: Add helpers to test/mark reg availability and dirtiness Add helpers to prettify code that tests and/or marks whether or not a register is available and/or dirty. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-28 04:45:22 +07:00
if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection Replace the kvm_x86_ops pointer in common x86 with an instance of the struct to save one pointer dereference when invoking functions. Copy the struct by value to set the ops during kvm_init(). Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the ops have been initialized, i.e. a vendor KVM module has been loaded. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-22 03:26:00 +07:00
kvm_x86_ops.cache_reg(vcpu, VCPU_EXREG_CR3);
KVM: Replace reads of vcpu->arch.cr3 by an accessor This allows us to keep cr3 in the VMCS, later on. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-12-05 22:30:00 +07:00
return vcpu->arch.cr3;
}
KVM: Add accessor for reading cr4 (or some bits of cr4) Some bits of cr4 can be owned by the guest on vmx, so when we read them, we copy them to the vcpu structure. In preparation for making the set of guest-owned bits dynamic, use helpers to access these bits so we don't need to know where the bit resides. No changes to svm since all bits are host-owned there. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-07 17:16:48 +07:00
static inline ulong kvm_read_cr4(struct kvm_vcpu *vcpu)
{
return kvm_read_cr4_bits(vcpu, ~0UL);
}
KVM: VMX: Enable XSAVE/XRSTOR for guest This patch enable guest to use XSAVE/XRSTOR instructions. We assume that host_xcr0 would use all possible bits that OS supported. And we loaded xcr0 in the same way we handled fpu - do it as late as we can. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-10 10:27:12 +07:00
static inline u64 kvm_read_edx_eax(struct kvm_vcpu *vcpu)
{
KVM: x86: Omit caching logic for always-available GPRs Except for RSP and RIP, which are held in VMX's VMCS, GPRs are always treated "available and dirtly" on both VMX and SVM, i.e. are unconditionally loaded/saved immediately before/after VM-Enter/VM-Exit. Eliminating the unnecessary caching code reduces the size of KVM by a non-trivial amount, much of which comes from the most common code paths. E.g. on x86_64, kvm_emulate_cpuid() is reduced from 342 to 182 bytes and kvm_emulate_hypercall() from 1362 to 1143, with the total size of KVM dropping by ~1000 bytes. With CONFIG_RETPOLINE=y, the numbers are even more pronounced, e.g.: 353->182, 1418->1172 and well over 2000 bytes. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-01 00:36:17 +07:00
return (kvm_rax_read(vcpu) & -1u)
| ((u64)(kvm_rdx_read(vcpu) & -1u) << 32);
KVM: VMX: Enable XSAVE/XRSTOR for guest This patch enable guest to use XSAVE/XRSTOR instructions. We assume that host_xcr0 would use all possible bits that OS supported. And we loaded xcr0 in the same way we handled fpu - do it as late as we can. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-10 10:27:12 +07:00
}
KVM: X86: Introduce generic guest-mode representation This patch introduces a generic representation of guest-mode fpr a vcpu. This currently only exists in the SVM code. Having this representation generic will help making the non-svm code aware of nesting when this is necessary. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-29 23:51:47 +07:00
static inline void enter_guest_mode(struct kvm_vcpu *vcpu)
{
vcpu->arch.hflags |= HF_GUEST_MASK;
}
static inline void leave_guest_mode(struct kvm_vcpu *vcpu)
{
vcpu->arch.hflags &= ~HF_GUEST_MASK;
KVM: nVMX: Do not load EOI-exitmap while running L2 When L1 IOAPIC redirection-table is written, a request of KVM_REQ_SCAN_IOAPIC is set on all vCPUs. This is done such that all vCPUs will now recalc their IOAPIC handled vectors and load it to their EOI-exitmap. However, it could be that one of the vCPUs is currently running L2. In this case, load_eoi_exitmap() will be called which would write to vmcs02->eoi_exit_bitmap, which is wrong because vmcs02->eoi_exit_bitmap should always be equal to vmcs12->eoi_exit_bitmap. Furthermore, at this point KVM_REQ_SCAN_IOAPIC was already consumed and therefore we will never update vmcs01->eoi_exit_bitmap. This could lead to remote_irr of some IOAPIC level-triggered entry to remain set forever. Fix this issue by delaying the load of EOI-exitmap to when vCPU is running L1. One may wonder why not just delay entire KVM_REQ_SCAN_IOAPIC processing to when vCPU is running L1. This is done in order to handle correctly the case where LAPIC & IO-APIC of L1 is pass-throughed into L2. In this case, vmcs12->virtual_interrupt_delivery should be 0. In current nVMX implementation, that results in vmcs02->virtual_interrupt_delivery to also be 0. Thus, vmcs02->eoi_exit_bitmap is not used. Therefore, every L2 EOI cause a #VMExit into L0 (either on MSR_WRITE to x2APIC MSR or APIC_ACCESS/APIC_WRITE/EPT_MISCONFIG to APIC MMIO page). In order for such L2 EOI to be broadcasted, if needed, from LAPIC to IO-APIC, vcpu->arch.ioapic_handled_vectors must be updated while L2 is running. Therefore, patch makes sure to delay only the loading of EOI-exitmap but not the update of vcpu->arch.ioapic_handled_vectors. Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-21 07:50:31 +07:00
if (vcpu->arch.load_eoi_exitmap_pending) {
vcpu->arch.load_eoi_exitmap_pending = false;
kvm_make_request(KVM_REQ_LOAD_EOI_EXITMAP, vcpu);
}
KVM: X86: Introduce generic guest-mode representation This patch introduces a generic representation of guest-mode fpr a vcpu. This currently only exists in the SVM code. Having this representation generic will help making the non-svm code aware of nesting when this is necessary. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-11-29 23:51:47 +07:00
}
static inline bool is_guest_mode(struct kvm_vcpu *vcpu)
{
return vcpu->arch.hflags & HF_GUEST_MASK;
}
KVM: x86: API changes for SMM support This patch includes changes to the external API for SMM support. Userspace can predicate the availability of the new fields and ioctls on a new capability, KVM_CAP_X86_SMM, which is added at the end of the patch series. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-01 20:06:40 +07:00
static inline bool is_smm(struct kvm_vcpu *vcpu)
{
return vcpu->arch.hflags & HF_SMM_MASK;
}
KVM: x86: accessors for guest registers As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-06-28 00:58:02 +07:00
#endif
Reference in New Issue Copy Permalink