linux_dsm_epyc7002/arch/powerpc/platforms/pseries/lpar.c

1022 lines
25 KiB
C
Raw Normal View History

/*
* pSeries_lpar.c
* Copyright (C) 2001 Todd Inglett, IBM Corporation
*
* pSeries LPAR support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Enables debugging of low-level hash table routines - careful! */
#undef DEBUG
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/console.h>
#include <linux/export.h>
#include <linux/jump_label.h>
#include <linux/delay.h>
#include <linux/stop_machine.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/mmu_context.h>
#include <asm/iommu.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/prom.h>
#include <asm/cputable.h>
#include <asm/udbg.h>
#include <asm/smp.h>
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
#include <asm/kexec.h>
#include <asm/fadump.h>
#include <asm/asm-prototypes.h>
#include "pseries.h"
/* Flag bits for H_BULK_REMOVE */
#define HBR_REQUEST 0x4000000000000000UL
#define HBR_RESPONSE 0x8000000000000000UL
#define HBR_END 0xc000000000000000UL
#define HBR_AVPN 0x0200000000000000UL
#define HBR_ANDCOND 0x0100000000000000UL
/* in hvCall.S */
EXPORT_SYMBOL(plpar_hcall);
EXPORT_SYMBOL(plpar_hcall9);
EXPORT_SYMBOL(plpar_hcall_norets);
void vpa_init(int cpu)
{
int hwcpu = get_hard_smp_processor_id(cpu);
unsigned long addr;
long ret;
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
struct paca_struct *pp;
struct dtl_entry *dtl;
/*
* The spec says it "may be problematic" if CPU x registers the VPA of
* CPU y. We should never do that, but wail if we ever do.
*/
WARN_ON(cpu != smp_processor_id());
if (cpu_has_feature(CPU_FTR_ALTIVEC))
lppaca_of(cpu).vmxregs_in_use = 1;
if (cpu_has_feature(CPU_FTR_ARCH_207S))
lppaca_of(cpu).ebb_regs_in_use = 1;
addr = __pa(&lppaca_of(cpu));
ret = register_vpa(hwcpu, addr);
if (ret) {
pr_err("WARNING: VPA registration for cpu %d (hw %d) of area "
"%lx failed with %ld\n", cpu, hwcpu, addr, ret);
return;
}
#ifdef CONFIG_PPC_STD_MMU_64
/*
* PAPR says this feature is SLB-Buffer but firmware never
* reports that. All SPLPAR support SLB shadow buffer.
*/
if (!radix_enabled() && firmware_has_feature(FW_FEATURE_SPLPAR)) {
addr = __pa(paca[cpu].slb_shadow_ptr);
ret = register_slb_shadow(hwcpu, addr);
if (ret)
pr_err("WARNING: SLB shadow buffer registration for "
"cpu %d (hw %d) of area %lx failed with %ld\n",
cpu, hwcpu, addr, ret);
}
#endif /* CONFIG_PPC_STD_MMU_64 */
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
/*
* Register dispatch trace log, if one has been allocated.
*/
pp = &paca[cpu];
dtl = pp->dispatch_log;
if (dtl) {
pp->dtl_ridx = 0;
pp->dtl_curr = dtl;
lppaca_of(cpu).dtl_idx = 0;
/* hypervisor reads buffer length from this field */
dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES);
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
ret = register_dtl(hwcpu, __pa(dtl));
if (ret)
pr_err("WARNING: DTL registration of cpu %d (hw %d) "
"failed with %ld\n", smp_processor_id(),
hwcpu, ret);
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
lppaca_of(cpu).dtl_enable_mask = 2;
}
}
#ifdef CONFIG_PPC_STD_MMU_64
static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
unsigned long vpn, unsigned long pa,
unsigned long rflags, unsigned long vflags,
int psize, int apsize, int ssize)
{
unsigned long lpar_rc;
unsigned long flags;
unsigned long slot;
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
pr_devel("hpte_insert(group=%lx, vpn=%016lx, "
"pa=%016lx, rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, vpn, pa, rflags, vflags, psize);
hpte_v = hpte_encode_v(vpn, psize, apsize, ssize) | vflags | HPTE_V_VALID;
hpte_r = hpte_encode_r(pa, psize, apsize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
/* Zero page = 0 */
/* I-cache Invalidate = 0 */
/* I-cache synchronize = 0 */
/* Exact = 0 */
flags = 0;
if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
flags |= H_COALESCE_CAND;
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" full\n");
return -1;
}
/*
* Since we try and ioremap PHBs we don't own, the pte insert
* will fail. However we must catch the failure in hash_page
* or we will loop forever, so return -2 in this case.
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" lpar err %ld\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
*/
return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3);
}
static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock);
static long pSeries_lpar_hpte_remove(unsigned long hpte_group)
{
unsigned long slot_offset;
unsigned long lpar_rc;
int i;
unsigned long dummy1, dummy2;
/* pick a random slot to start at */
slot_offset = mftb() & 0x7;
for (i = 0; i < HPTES_PER_GROUP; i++) {
/* don't remove a bolted entry */
lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
(0x1UL << 4), &dummy1, &dummy2);
if (lpar_rc == H_SUCCESS)
return i;
/*
* The test for adjunct partition is performed before the
* ANDCOND test. H_RESOURCE may be returned, so we need to
* check for that as well.
*/
BUG_ON(lpar_rc != H_NOT_FOUND && lpar_rc != H_RESOURCE);
slot_offset++;
slot_offset &= 0x7;
}
return -1;
}
static void manual_hpte_clear_all(void)
{
unsigned long size_bytes = 1UL << ppc64_pft_size;
unsigned long hpte_count = size_bytes >> 4;
struct {
unsigned long pteh;
unsigned long ptel;
} ptes[4];
long lpar_rc;
unsigned long i, j;
/* Read in batches of 4,
* invalidate only valid entries not in the VRMA
* hpte_count will be a multiple of 4
*/
for (i = 0; i < hpte_count; i += 4) {
lpar_rc = plpar_pte_read_4_raw(0, i, (void *)ptes);
if (lpar_rc != H_SUCCESS)
continue;
for (j = 0; j < 4; j++){
if ((ptes[j].pteh & HPTE_V_VRMA_MASK) ==
HPTE_V_VRMA_MASK)
continue;
if (ptes[j].pteh & HPTE_V_VALID)
plpar_pte_remove_raw(0, i + j, 0,
&(ptes[j].pteh), &(ptes[j].ptel));
}
}
}
static int hcall_hpte_clear_all(void)
{
int rc;
do {
rc = plpar_hcall_norets(H_CLEAR_HPT);
} while (rc == H_CONTINUE);
return rc;
}
static void pseries_hpte_clear_all(void)
{
int rc;
rc = hcall_hpte_clear_all();
if (rc != H_SUCCESS)
manual_hpte_clear_all();
#ifdef __LITTLE_ENDIAN__
/*
* Reset exceptions to big endian.
*
* FIXME this is a hack for kexec, we need to reset the exception
* endian before starting the new kernel and this is a convenient place
* to do it.
*
* This is also called on boot when a fadump happens. In that case we
* must not change the exception endian mode.
*/
if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active())
pseries_big_endian_exceptions();
#endif
}
/*
* NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
* the low 3 bits of flags happen to line up. So no transform is needed.
* We can probably optimize here and assume the high bits of newpp are
* already zero. For now I am paranoid.
*/
static long pSeries_lpar_hpte_updatepp(unsigned long slot,
unsigned long newpp,
unsigned long vpn,
int psize, int apsize,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-04 12:30:14 +07:00
int ssize, unsigned long inv_flags)
{
unsigned long lpar_rc;
unsigned long flags = (newpp & 7) | H_AVPN;
unsigned long want_v;
want_v = hpte_encode_avpn(vpn, psize, ssize);
pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
pr_devel("not found !\n");
return -1;
}
pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
return 0;
}
static long __pSeries_lpar_hpte_find(unsigned long want_v, unsigned long hpte_group)
{
long lpar_rc;
unsigned long i, j;
struct {
unsigned long pteh;
unsigned long ptel;
} ptes[4];
for (i = 0; i < HPTES_PER_GROUP; i += 4, hpte_group += 4) {
lpar_rc = plpar_pte_read_4(0, hpte_group, (void *)ptes);
if (lpar_rc != H_SUCCESS)
continue;
for (j = 0; j < 4; j++) {
if (HPTE_V_COMPARE(ptes[j].pteh, want_v) &&
(ptes[j].pteh & HPTE_V_VALID))
return i + j;
}
}
return -1;
}
static long pSeries_lpar_hpte_find(unsigned long vpn, int psize, int ssize)
{
long slot;
unsigned long hash;
unsigned long want_v;
unsigned long hpte_group;
hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize);
want_v = hpte_encode_avpn(vpn, psize, ssize);
/* Bolted entries are always in the primary group */
hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot = __pSeries_lpar_hpte_find(want_v, hpte_group);
if (slot < 0)
return -1;
return hpte_group + slot;
}
static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
unsigned long ea,
int psize, int ssize)
{
unsigned long vpn;
unsigned long lpar_rc, slot, vsid, flags;
vsid = get_kernel_vsid(ea, ssize);
vpn = hpt_vpn(ea, vsid, ssize);
slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
BUG_ON(slot == -1);
flags = newpp & 7;
lpar_rc = plpar_pte_protect(flags, slot, 0);
BUG_ON(lpar_rc != H_SUCCESS);
}
static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
int psize, int apsize,
int ssize, int local)
{
unsigned long want_v;
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
pr_devel(" inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n",
slot, vpn, psize, local);
want_v = hpte_encode_avpn(vpn, psize, ssize);
lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2);
if (lpar_rc == H_NOT_FOUND)
return;
BUG_ON(lpar_rc != H_SUCCESS);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
/*
* Limit iterations holding pSeries_lpar_tlbie_lock to 3. We also need
* to make sure that we avoid bouncing the hypervisor tlbie lock.
*/
#define PPC64_HUGE_HPTE_BATCH 12
static void __pSeries_lpar_hugepage_invalidate(unsigned long *slot,
unsigned long *vpn, int count,
int psize, int ssize)
{
powerpc/pseries: Fix stack corruption in htpe code This commit fixes a stack corruption in the pseries specific code dealing with the huge pages. In __pSeries_lpar_hugepage_invalidate() the buffer used to pass arguments to the hypervisor is not large enough. This leads to a stack corruption where a previously saved register could be corrupted leading to unexpected result in the caller, like the following panic: Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: virtio_balloon ip_tables x_tables autofs4 virtio_blk 8139too virtio_pci virtio_ring 8139cp virtio CPU: 11 PID: 1916 Comm: mmstress Not tainted 4.8.0 #76 task: c000000005394880 task.stack: c000000005570000 NIP: c00000000027bf6c LR: c00000000027bf64 CTR: 0000000000000000 REGS: c000000005573820 TRAP: 0300 Not tainted (4.8.0) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 84822884 XER: 20000000 CFAR: c00000000010a924 DAR: 420000000014e5e0 DSISR: 40000000 SOFTE: 1 GPR00: c00000000027bf64 c000000005573aa0 c000000000e02800 c000000004447964 GPR04: c00000000404de18 c000000004d38810 00000000042100f5 00000000f5002104 GPR08: e0000000f5002104 0000000000000001 042100f5000000e0 00000000042100f5 GPR12: 0000000000002200 c00000000fe02c00 c00000000404de18 0000000000000000 GPR16: c1ffffffffffe7ff 00003fff62000000 420000000014e5e0 00003fff63000000 GPR20: 0008000000000000 c0000000f7014800 0405e600000000e0 0000000000010000 GPR24: c000000004d38810 c000000004447c10 c00000000404de18 c000000004447964 GPR28: c000000005573b10 c000000004d38810 00003fff62000000 420000000014e5e0 NIP [c00000000027bf6c] zap_huge_pmd+0x4c/0x470 LR [c00000000027bf64] zap_huge_pmd+0x44/0x470 Call Trace: [c000000005573aa0] [c00000000027bf64] zap_huge_pmd+0x44/0x470 (unreliable) [c000000005573af0] [c00000000022bbd8] unmap_page_range+0xcf8/0xed0 [c000000005573c30] [c00000000022c2d4] unmap_vmas+0x84/0x120 [c000000005573c80] [c000000000235448] unmap_region+0xd8/0x1b0 [c000000005573d80] [c0000000002378f0] do_munmap+0x2d0/0x4c0 [c000000005573df0] [c000000000237be4] SyS_munmap+0x64/0xb0 [c000000005573e30] [c000000000009560] system_call+0x38/0x108 Instruction dump: fbe1fff8 fb81ffe0 7c7f1b78 7ca32b78 7cbd2b78 f8010010 7c9a2378 f821ffb1 7cde3378 4bfffea9 7c7b1b79 41820298 <e87f0000> 48000130 7fa5eb78 7fc4f378 Most of the time, the bug is surfacing in a caller up in the stack from __pSeries_lpar_hugepage_invalidate() which is quite confusing. This bug is pending since v3.11 but was hidden if a caller of the caller of __pSeries_lpar_hugepage_invalidate() has pushed the corruped register (r18 in this case) in the stack and is not using it until restoring it. GCC 6.2.0 seems to raise it more frequently. This commit also change the definition of the parameter buffer in pSeries_lpar_flush_hash_range() to rely on the global define PLPAR_HCALL9_BUFSIZE (no functional change here). Fixes: 1a5272866f87 ("powerpc: Optimize hugepage invalidate") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-06 20:33:21 +07:00
unsigned long param[PLPAR_HCALL9_BUFSIZE];
int i = 0, pix = 0, rc;
unsigned long flags = 0;
int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
if (lock_tlbie)
spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
for (i = 0; i < count; i++) {
if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
pSeries_lpar_hpte_invalidate(slot[i], vpn[i], psize, 0,
ssize, 0);
} else {
param[pix] = HBR_REQUEST | HBR_AVPN | slot[i];
param[pix+1] = hpte_encode_avpn(vpn[i], psize, ssize);
pix += 2;
if (pix == 8) {
rc = plpar_hcall9(H_BULK_REMOVE, param,
param[0], param[1], param[2],
param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
pix = 0;
}
}
}
if (pix) {
param[pix] = HBR_END;
rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1],
param[2], param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
}
if (lock_tlbie)
spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);
}
static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
unsigned long addr,
unsigned char *hpte_slot_array,
int psize, int ssize, int local)
{
int i, index = 0;
unsigned long s_addr = addr;
unsigned int max_hpte_count, valid;
unsigned long vpn_array[PPC64_HUGE_HPTE_BATCH];
unsigned long slot_array[PPC64_HUGE_HPTE_BATCH];
unsigned long shift, hidx, vpn = 0, hash, slot;
shift = mmu_psize_defs[psize].shift;
max_hpte_count = 1U << (PMD_SHIFT - shift);
for (i = 0; i < max_hpte_count; i++) {
valid = hpte_valid(hpte_slot_array, i);
if (!valid)
continue;
hidx = hpte_hash_index(hpte_slot_array, i);
/* get the vpn */
addr = s_addr + (i * (1ul << shift));
vpn = hpt_vpn(addr, vsid, ssize);
hash = hpt_hash(vpn, shift, ssize);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
slot_array[index] = slot;
vpn_array[index] = vpn;
if (index == PPC64_HUGE_HPTE_BATCH - 1) {
/*
* Now do a bluk invalidate
*/
__pSeries_lpar_hugepage_invalidate(slot_array,
vpn_array,
PPC64_HUGE_HPTE_BATCH,
psize, ssize);
index = 0;
} else
index++;
}
if (index)
__pSeries_lpar_hugepage_invalidate(slot_array, vpn_array,
index, psize, ssize);
}
#else
static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
unsigned long addr,
unsigned char *hpte_slot_array,
int psize, int ssize, int local)
{
WARN(1, "%s called without THP support\n", __func__);
}
#endif
static int pSeries_lpar_hpte_removebolted(unsigned long ea,
int psize, int ssize)
{
unsigned long vpn;
unsigned long slot, vsid;
vsid = get_kernel_vsid(ea, ssize);
vpn = hpt_vpn(ea, vsid, ssize);
slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
if (slot == -1)
return -ENOENT;
/*
* lpar doesn't use the passed actual page size
*/
pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0);
return 0;
}
/*
* Take a spinlock around flushes to avoid bouncing the hypervisor tlbie
* lock.
*/
static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
{
unsigned long vpn;
unsigned long i, pix, rc;
unsigned long flags = 0;
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 03:23:25 +07:00
struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch);
int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
powerpc/pseries: Fix stack corruption in htpe code This commit fixes a stack corruption in the pseries specific code dealing with the huge pages. In __pSeries_lpar_hugepage_invalidate() the buffer used to pass arguments to the hypervisor is not large enough. This leads to a stack corruption where a previously saved register could be corrupted leading to unexpected result in the caller, like the following panic: Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: virtio_balloon ip_tables x_tables autofs4 virtio_blk 8139too virtio_pci virtio_ring 8139cp virtio CPU: 11 PID: 1916 Comm: mmstress Not tainted 4.8.0 #76 task: c000000005394880 task.stack: c000000005570000 NIP: c00000000027bf6c LR: c00000000027bf64 CTR: 0000000000000000 REGS: c000000005573820 TRAP: 0300 Not tainted (4.8.0) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 84822884 XER: 20000000 CFAR: c00000000010a924 DAR: 420000000014e5e0 DSISR: 40000000 SOFTE: 1 GPR00: c00000000027bf64 c000000005573aa0 c000000000e02800 c000000004447964 GPR04: c00000000404de18 c000000004d38810 00000000042100f5 00000000f5002104 GPR08: e0000000f5002104 0000000000000001 042100f5000000e0 00000000042100f5 GPR12: 0000000000002200 c00000000fe02c00 c00000000404de18 0000000000000000 GPR16: c1ffffffffffe7ff 00003fff62000000 420000000014e5e0 00003fff63000000 GPR20: 0008000000000000 c0000000f7014800 0405e600000000e0 0000000000010000 GPR24: c000000004d38810 c000000004447c10 c00000000404de18 c000000004447964 GPR28: c000000005573b10 c000000004d38810 00003fff62000000 420000000014e5e0 NIP [c00000000027bf6c] zap_huge_pmd+0x4c/0x470 LR [c00000000027bf64] zap_huge_pmd+0x44/0x470 Call Trace: [c000000005573aa0] [c00000000027bf64] zap_huge_pmd+0x44/0x470 (unreliable) [c000000005573af0] [c00000000022bbd8] unmap_page_range+0xcf8/0xed0 [c000000005573c30] [c00000000022c2d4] unmap_vmas+0x84/0x120 [c000000005573c80] [c000000000235448] unmap_region+0xd8/0x1b0 [c000000005573d80] [c0000000002378f0] do_munmap+0x2d0/0x4c0 [c000000005573df0] [c000000000237be4] SyS_munmap+0x64/0xb0 [c000000005573e30] [c000000000009560] system_call+0x38/0x108 Instruction dump: fbe1fff8 fb81ffe0 7c7f1b78 7ca32b78 7cbd2b78 f8010010 7c9a2378 f821ffb1 7cde3378 4bfffea9 7c7b1b79 41820298 <e87f0000> 48000130 7fa5eb78 7fc4f378 Most of the time, the bug is surfacing in a caller up in the stack from __pSeries_lpar_hugepage_invalidate() which is quite confusing. This bug is pending since v3.11 but was hidden if a caller of the caller of __pSeries_lpar_hugepage_invalidate() has pushed the corruped register (r18 in this case) in the stack and is not using it until restoring it. GCC 6.2.0 seems to raise it more frequently. This commit also change the definition of the parameter buffer in pSeries_lpar_flush_hash_range() to rely on the global define PLPAR_HCALL9_BUFSIZE (no functional change here). Fixes: 1a5272866f87 ("powerpc: Optimize hugepage invalidate") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-06 20:33:21 +07:00
unsigned long param[PLPAR_HCALL9_BUFSIZE];
unsigned long hash, index, shift, hidx, slot;
real_pte_t pte;
int psize, ssize;
if (lock_tlbie)
spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
psize = batch->psize;
ssize = batch->ssize;
pix = 0;
for (i = 0; i < number; i++) {
vpn = batch->vpn[i];
pte = batch->pte[i];
pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
hash = hpt_hash(vpn, shift, ssize);
hidx = __rpte_to_hidx(pte, index);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
/*
* lpar doesn't use the passed actual page size
*/
pSeries_lpar_hpte_invalidate(slot, vpn, psize,
0, ssize, local);
} else {
param[pix] = HBR_REQUEST | HBR_AVPN | slot;
param[pix+1] = hpte_encode_avpn(vpn, psize,
ssize);
pix += 2;
if (pix == 8) {
rc = plpar_hcall9(H_BULK_REMOVE, param,
param[0], param[1], param[2],
param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
pix = 0;
}
}
} pte_iterate_hashed_end();
}
if (pix) {
param[pix] = HBR_END;
rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1],
param[2], param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
}
if (lock_tlbie)
spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);
}
static int __init disable_bulk_remove(char *str)
{
if (strcmp(str, "off") == 0 &&
firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
printk(KERN_INFO "Disabling BULK_REMOVE firmware feature");
powerpc_firmware_features &= ~FW_FEATURE_BULK_REMOVE;
}
return 1;
}
__setup("bulk_remove=", disable_bulk_remove);
#define HPT_RESIZE_TIMEOUT 10000 /* ms */
struct hpt_resize_state {
unsigned long shift;
int commit_rc;
};
static int pseries_lpar_resize_hpt_commit(void *data)
{
struct hpt_resize_state *state = data;
state->commit_rc = plpar_resize_hpt_commit(0, state->shift);
if (state->commit_rc != H_SUCCESS)
return -EIO;
/* Hypervisor has transitioned the HTAB, update our globals */
ppc64_pft_size = state->shift;
htab_size_bytes = 1UL << ppc64_pft_size;
htab_hash_mask = (htab_size_bytes >> 7) - 1;
return 0;
}
/* Must be called in user context */
static int pseries_lpar_resize_hpt(unsigned long shift)
{
struct hpt_resize_state state = {
.shift = shift,
.commit_rc = H_FUNCTION,
};
unsigned int delay, total_delay = 0;
int rc;
ktime_t t0, t1, t2;
might_sleep();
if (!firmware_has_feature(FW_FEATURE_HPT_RESIZE))
return -ENODEV;
printk(KERN_INFO "lpar: Attempting to resize HPT to shift %lu\n",
shift);
t0 = ktime_get();
rc = plpar_resize_hpt_prepare(0, shift);
while (H_IS_LONG_BUSY(rc)) {
delay = get_longbusy_msecs(rc);
total_delay += delay;
if (total_delay > HPT_RESIZE_TIMEOUT) {
/* prepare with shift==0 cancels an in-progress resize */
rc = plpar_resize_hpt_prepare(0, 0);
if (rc != H_SUCCESS)
printk(KERN_WARNING
"lpar: Unexpected error %d cancelling timed out HPT resize\n",
rc);
return -ETIMEDOUT;
}
msleep(delay);
rc = plpar_resize_hpt_prepare(0, shift);
};
switch (rc) {
case H_SUCCESS:
/* Continue on */
break;
case H_PARAMETER:
return -EINVAL;
case H_RESOURCE:
return -EPERM;
default:
printk(KERN_WARNING
"lpar: Unexpected error %d from H_RESIZE_HPT_PREPARE\n",
rc);
return -EIO;
}
t1 = ktime_get();
rc = stop_machine(pseries_lpar_resize_hpt_commit, &state, NULL);
t2 = ktime_get();
if (rc != 0) {
switch (state.commit_rc) {
case H_PTEG_FULL:
printk(KERN_WARNING
"lpar: Hash collision while resizing HPT\n");
return -ENOSPC;
default:
printk(KERN_WARNING
"lpar: Unexpected error %d from H_RESIZE_HPT_COMMIT\n",
state.commit_rc);
return -EIO;
};
}
printk(KERN_INFO
"lpar: HPT resize to shift %lu complete (%lld ms / %lld ms)\n",
shift, (long long) ktime_ms_delta(t1, t0),
(long long) ktime_ms_delta(t2, t1));
return 0;
}
/* Actually only used for radix, so far */
static int pseries_lpar_register_process_table(unsigned long base,
unsigned long page_size, unsigned long table_size)
{
long rc;
unsigned long flags = PROC_TABLE_NEW;
if (radix_enabled())
flags |= PROC_TABLE_RADIX | PROC_TABLE_GTSE;
for (;;) {
rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base,
page_size, table_size);
if (!H_IS_LONG_BUSY(rc))
break;
mdelay(get_longbusy_msecs(rc));
}
if (rc != H_SUCCESS) {
pr_err("Failed to register process table (rc=%ld)\n", rc);
BUG();
}
return rc;
}
void __init hpte_init_pseries(void)
{
mmu_hash_ops.hpte_invalidate = pSeries_lpar_hpte_invalidate;
mmu_hash_ops.hpte_updatepp = pSeries_lpar_hpte_updatepp;
mmu_hash_ops.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
mmu_hash_ops.hpte_insert = pSeries_lpar_hpte_insert;
mmu_hash_ops.hpte_remove = pSeries_lpar_hpte_remove;
mmu_hash_ops.hpte_removebolted = pSeries_lpar_hpte_removebolted;
mmu_hash_ops.flush_hash_range = pSeries_lpar_flush_hash_range;
mmu_hash_ops.hpte_clear_all = pseries_hpte_clear_all;
mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate;
if (firmware_has_feature(FW_FEATURE_HPT_RESIZE))
mmu_hash_ops.resize_hpt = pseries_lpar_resize_hpt;
}
void radix_init_pseries(void)
{
pr_info("Using radix MMU under hypervisor\n");
register_process_table = pseries_lpar_register_process_table;
}
#ifdef CONFIG_PPC_SMLPAR
#define CMO_FREE_HINT_DEFAULT 1
static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;
static int __init cmo_free_hint(char *str)
{
char *parm;
parm = strstrip(str);
if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) {
printk(KERN_INFO "cmo_free_hint: CMO free page hinting is not active.\n");
cmo_free_hint_flag = 0;
return 1;
}
cmo_free_hint_flag = 1;
printk(KERN_INFO "cmo_free_hint: CMO free page hinting is active.\n");
if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0)
return 1;
return 0;
}
__setup("cmo_free_hint=", cmo_free_hint);
static void pSeries_set_page_state(struct page *page, int order,
unsigned long state)
{
int i, j;
unsigned long cmo_page_sz, addr;
cmo_page_sz = cmo_get_page_size();
addr = __pa((unsigned long)page_address(page));
for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) {
for (j = 0; j < PAGE_SIZE; j += cmo_page_sz)
plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0);
}
}
void arch_free_page(struct page *page, int order)
{
if (radix_enabled())
return;
if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO))
return;
pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED);
}
EXPORT_SYMBOL(arch_free_page);
#endif /* CONFIG_PPC_SMLPAR */
#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_TRACEPOINTS
#ifdef HAVE_JUMP_LABEL
struct static_key hcall_tracepoint_key = STATIC_KEY_INIT;
int hcall_tracepoint_regfunc(void)
{
static_key_slow_inc(&hcall_tracepoint_key);
return 0;
}
void hcall_tracepoint_unregfunc(void)
{
static_key_slow_dec(&hcall_tracepoint_key);
}
#else
/*
* We optimise our hcall path by placing hcall_tracepoint_refcount
* directly in the TOC so we can check if the hcall tracepoints are
* enabled via a single load.
*/
/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
extern long hcall_tracepoint_refcount;
int hcall_tracepoint_regfunc(void)
{
hcall_tracepoint_refcount++;
return 0;
}
void hcall_tracepoint_unregfunc(void)
{
hcall_tracepoint_refcount--;
}
#endif
/*
* Since the tracing code might execute hcalls we need to guard against
* recursion. One example of this are spinlocks calling H_YIELD on
* shared processor partitions.
*/
static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
{
unsigned long flags;
unsigned int *depth;
/*
* We cannot call tracepoints inside RCU idle regions which
* means we must not trace H_CEDE.
*/
if (opcode == H_CEDE)
return;
local_irq_save(flags);
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 03:23:25 +07:00
depth = this_cpu_ptr(&hcall_trace_depth);
if (*depth)
goto out;
(*depth)++;
preempt_disable();
trace_hcall_entry(opcode, args);
(*depth)--;
out:
local_irq_restore(flags);
}
void __trace_hcall_exit(long opcode, unsigned long retval,
unsigned long *retbuf)
{
unsigned long flags;
unsigned int *depth;
if (opcode == H_CEDE)
return;
local_irq_save(flags);
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 03:23:25 +07:00
depth = this_cpu_ptr(&hcall_trace_depth);
if (*depth)
goto out;
(*depth)++;
trace_hcall_exit(opcode, retval, retbuf);
preempt_enable();
(*depth)--;
out:
local_irq_restore(flags);
}
#endif
/**
* h_get_mpp
* H_GET_MPP hcall returns info in 7 parms
*/
int h_get_mpp(struct hvcall_mpp_data *mpp_data)
{
int rc;
unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
rc = plpar_hcall9(H_GET_MPP, retbuf);
mpp_data->entitled_mem = retbuf[0];
mpp_data->mapped_mem = retbuf[1];
mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
mpp_data->pool_num = retbuf[2] & 0xffff;
mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffffUL;
mpp_data->pool_size = retbuf[4];
mpp_data->loan_request = retbuf[5];
mpp_data->backing_mem = retbuf[6];
return rc;
}
EXPORT_SYMBOL(h_get_mpp);
int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data)
{
int rc;
unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = { 0 };
rc = plpar_hcall9(H_GET_MPP_X, retbuf);
mpp_x_data->coalesced_bytes = retbuf[0];
mpp_x_data->pool_coalesced_bytes = retbuf[1];
mpp_x_data->pool_purr_cycles = retbuf[2];
mpp_x_data->pool_spurr_cycles = retbuf[3];
return rc;
}
static unsigned long vsid_unscramble(unsigned long vsid, int ssize)
{
unsigned long protovsid;
unsigned long va_bits = VA_BITS;
unsigned long modinv, vsid_modulus;
unsigned long max_mod_inv, tmp_modinv;
if (!mmu_has_feature(MMU_FTR_68_BIT_VA))
va_bits = 65;
if (ssize == MMU_SEGSIZE_256M) {
modinv = VSID_MULINV_256M;
vsid_modulus = ((1UL << (va_bits - SID_SHIFT)) - 1);
} else {
modinv = VSID_MULINV_1T;
vsid_modulus = ((1UL << (va_bits - SID_SHIFT_1T)) - 1);
}
/*
* vsid outside our range.
*/
if (vsid >= vsid_modulus)
return 0;
/*
* If modinv is the modular multiplicate inverse of (x % vsid_modulus)
* and vsid = (protovsid * x) % vsid_modulus, then we say:
* protovsid = (vsid * modinv) % vsid_modulus
*/
/* Check if (vsid * modinv) overflow (63 bits) */
max_mod_inv = 0x7fffffffffffffffull / vsid;
if (modinv < max_mod_inv)
return (vsid * modinv) % vsid_modulus;
tmp_modinv = modinv/max_mod_inv;
modinv %= max_mod_inv;
protovsid = (((vsid * max_mod_inv) % vsid_modulus) * tmp_modinv) % vsid_modulus;
protovsid = (protovsid + vsid * modinv) % vsid_modulus;
return protovsid;
}
static int __init reserve_vrma_context_id(void)
{
unsigned long protovsid;
/*
* Reserve context ids which map to reserved virtual addresses. For now
* we only reserve the context id which maps to the VRMA VSID. We ignore
* the addresses in "ibm,adjunct-virtual-addresses" because we don't
* enable adjunct support via the "ibm,client-architecture-support"
* interface.
*/
protovsid = vsid_unscramble(VRMA_VSID, MMU_SEGSIZE_1T);
hash__reserve_context_id(protovsid >> ESID_BITS_1T);
return 0;
}
machine_device_initcall(pseries, reserve_vrma_context_id);