linux_dsm_epyc7002/drivers/s390/block/dasd_eckd.c

3280 lines
91 KiB
C
Raw Normal View History

/*
* File...........: linux/drivers/s390/block/dasd_eckd.c
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Horst Hummel <Horst.Hummel@de.ibm.com>
* Carsten Otte <Cotte@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
* EMC Symmetrix ioctl Copyright EMC Corporation, 2008
* Author.........: Nigel Hislop <hislop_nigel@emc.com>
*
*/
#define KMSG_COMPONENT "dasd"
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <asm/todclk.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
#include <asm/ccwdev.h>
#include <asm/itcw.h>
#include "dasd_int.h"
#include "dasd_eckd.h"
#include "../cio/chsc.h"
#ifdef PRINTK_HEADER
#undef PRINTK_HEADER
#endif /* PRINTK_HEADER */
#define PRINTK_HEADER "dasd(eckd):"
#define ECKD_C0(i) (i->home_bytes)
#define ECKD_F(i) (i->formula)
#define ECKD_F1(i) (ECKD_F(i)==0x01?(i->factors.f_0x01.f1):\
(i->factors.f_0x02.f1))
#define ECKD_F2(i) (ECKD_F(i)==0x01?(i->factors.f_0x01.f2):\
(i->factors.f_0x02.f2))
#define ECKD_F3(i) (ECKD_F(i)==0x01?(i->factors.f_0x01.f3):\
(i->factors.f_0x02.f3))
#define ECKD_F4(i) (ECKD_F(i)==0x02?(i->factors.f_0x02.f4):0)
#define ECKD_F5(i) (ECKD_F(i)==0x02?(i->factors.f_0x02.f5):0)
#define ECKD_F6(i) (i->factor6)
#define ECKD_F7(i) (i->factor7)
#define ECKD_F8(i) (i->factor8)
MODULE_LICENSE("GPL");
static struct dasd_discipline dasd_eckd_discipline;
/* The ccw bus type uses this table to find devices that it sends to
* dasd_eckd_probe */
static struct ccw_device_id dasd_eckd_ids[] = {
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), .driver_info = 0x7},
{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), .driver_info = 0x8},
{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), .driver_info = 0x9},
{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), .driver_info = 0xa},
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(ccw, dasd_eckd_ids);
static struct ccw_driver dasd_eckd_driver; /* see below */
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
static int
dasd_eckd_probe (struct ccw_device *cdev)
{
int ret;
/* set ECKD specific ccw-device options */
ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE);
if (ret) {
DBF_EVENT(DBF_WARNING,
"dasd_eckd_probe: could not set ccw-device options "
"for %s\n", dev_name(&cdev->dev));
return ret;
}
ret = dasd_generic_probe(cdev, &dasd_eckd_discipline);
return ret;
}
static int
dasd_eckd_set_online(struct ccw_device *cdev)
{
return dasd_generic_set_online(cdev, &dasd_eckd_discipline);
}
static struct ccw_driver dasd_eckd_driver = {
.name = "dasd-eckd",
.owner = THIS_MODULE,
.ids = dasd_eckd_ids,
.probe = dasd_eckd_probe,
.remove = dasd_generic_remove,
.set_offline = dasd_generic_set_offline,
.set_online = dasd_eckd_set_online,
.notify = dasd_generic_notify,
};
static const int sizes_trk0[] = { 28, 148, 84 };
#define LABEL_SIZE 140
static inline unsigned int
round_up_multiple(unsigned int no, unsigned int mult)
{
int rem = no % mult;
return (rem ? no - rem + mult : no);
}
static inline unsigned int
ceil_quot(unsigned int d1, unsigned int d2)
{
return (d1 + (d2 - 1)) / d2;
}
static unsigned int
recs_per_track(struct dasd_eckd_characteristics * rdc,
unsigned int kl, unsigned int dl)
{
int dn, kn;
switch (rdc->dev_type) {
case 0x3380:
if (kl)
return 1499 / (15 + 7 + ceil_quot(kl + 12, 32) +
ceil_quot(dl + 12, 32));
else
return 1499 / (15 + ceil_quot(dl + 12, 32));
case 0x3390:
dn = ceil_quot(dl + 6, 232) + 1;
if (kl) {
kn = ceil_quot(kl + 6, 232) + 1;
return 1729 / (10 + 9 + ceil_quot(kl + 6 * kn, 34) +
9 + ceil_quot(dl + 6 * dn, 34));
} else
return 1729 / (10 + 9 + ceil_quot(dl + 6 * dn, 34));
case 0x9345:
dn = ceil_quot(dl + 6, 232) + 1;
if (kl) {
kn = ceil_quot(kl + 6, 232) + 1;
return 1420 / (18 + 7 + ceil_quot(kl + 6 * kn, 34) +
ceil_quot(dl + 6 * dn, 34));
} else
return 1420 / (18 + 7 + ceil_quot(dl + 6 * dn, 34));
}
return 0;
}
static void set_ch_t(struct ch_t *geo, __u32 cyl, __u8 head)
{
geo->cyl = (__u16) cyl;
geo->head = cyl >> 16;
geo->head <<= 4;
geo->head |= head;
}
static int
check_XRC (struct ccw1 *de_ccw,
struct DE_eckd_data *data,
struct dasd_device *device)
{
struct dasd_eckd_private *private;
int rc;
private = (struct dasd_eckd_private *) device->private;
if (!private->rdc_data.facilities.XRC_supported)
return 0;
/* switch on System Time Stamp - needed for XRC Support */
data->ga_extended |= 0x08; /* switch on 'Time Stamp Valid' */
data->ga_extended |= 0x02; /* switch on 'Extended Parameter' */
rc = get_sync_clock(&data->ep_sys_time);
/* Ignore return code if sync clock is switched off. */
if (rc == -ENOSYS || rc == -EACCES)
rc = 0;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
de_ccw->count = sizeof(struct DE_eckd_data);
de_ccw->flags |= CCW_FLAG_SLI;
return rc;
}
static int
define_extent(struct ccw1 *ccw, struct DE_eckd_data *data, unsigned int trk,
unsigned int totrk, int cmd, struct dasd_device *device)
{
struct dasd_eckd_private *private;
u32 begcyl, endcyl;
u16 heads, beghead, endhead;
int rc = 0;
private = (struct dasd_eckd_private *) device->private;
ccw->cmd_code = DASD_ECKD_CCW_DEFINE_EXTENT;
ccw->flags = 0;
ccw->count = 16;
ccw->cda = (__u32) __pa(data);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
memset(data, 0, sizeof(struct DE_eckd_data));
switch (cmd) {
case DASD_ECKD_CCW_READ_HOME_ADDRESS:
case DASD_ECKD_CCW_READ_RECORD_ZERO:
case DASD_ECKD_CCW_READ:
case DASD_ECKD_CCW_READ_MT:
case DASD_ECKD_CCW_READ_CKD:
case DASD_ECKD_CCW_READ_CKD_MT:
case DASD_ECKD_CCW_READ_KD:
case DASD_ECKD_CCW_READ_KD_MT:
case DASD_ECKD_CCW_READ_COUNT:
data->mask.perm = 0x1;
data->attributes.operation = private->attrib.operation;
break;
case DASD_ECKD_CCW_WRITE:
case DASD_ECKD_CCW_WRITE_MT:
case DASD_ECKD_CCW_WRITE_KD:
case DASD_ECKD_CCW_WRITE_KD_MT:
data->mask.perm = 0x02;
data->attributes.operation = private->attrib.operation;
rc = check_XRC (ccw, data, device);
break;
case DASD_ECKD_CCW_WRITE_CKD:
case DASD_ECKD_CCW_WRITE_CKD_MT:
data->attributes.operation = DASD_BYPASS_CACHE;
rc = check_XRC (ccw, data, device);
break;
case DASD_ECKD_CCW_ERASE:
case DASD_ECKD_CCW_WRITE_HOME_ADDRESS:
case DASD_ECKD_CCW_WRITE_RECORD_ZERO:
data->mask.perm = 0x3;
data->mask.auth = 0x1;
data->attributes.operation = DASD_BYPASS_CACHE;
rc = check_XRC (ccw, data, device);
break;
default:
dev_err(&device->cdev->dev,
"0x%x is not a known command\n", cmd);
break;
}
data->attributes.mode = 0x3; /* ECKD */
if ((private->rdc_data.cu_type == 0x2105 ||
private->rdc_data.cu_type == 0x2107 ||
private->rdc_data.cu_type == 0x1750)
&& !(private->uses_cdl && trk < 2))
data->ga_extended |= 0x40; /* Regular Data Format Mode */
heads = private->rdc_data.trk_per_cyl;
begcyl = trk / heads;
beghead = trk % heads;
endcyl = totrk / heads;
endhead = totrk % heads;
/* check for sequential prestage - enhance cylinder range */
if (data->attributes.operation == DASD_SEQ_PRESTAGE ||
data->attributes.operation == DASD_SEQ_ACCESS) {
if (endcyl + private->attrib.nr_cyl < private->real_cyl)
endcyl += private->attrib.nr_cyl;
else
endcyl = (private->real_cyl - 1);
}
set_ch_t(&data->beg_ext, begcyl, beghead);
set_ch_t(&data->end_ext, endcyl, endhead);
return rc;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static int check_XRC_on_prefix(struct PFX_eckd_data *pfxdata,
struct dasd_device *device)
{
struct dasd_eckd_private *private;
int rc;
private = (struct dasd_eckd_private *) device->private;
if (!private->rdc_data.facilities.XRC_supported)
return 0;
/* switch on System Time Stamp - needed for XRC Support */
pfxdata->define_extent.ga_extended |= 0x08; /* 'Time Stamp Valid' */
pfxdata->define_extent.ga_extended |= 0x02; /* 'Extended Parameter' */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
pfxdata->validity.time_stamp = 1; /* 'Time Stamp Valid' */
rc = get_sync_clock(&pfxdata->define_extent.ep_sys_time);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* Ignore return code if sync clock is switched off. */
if (rc == -ENOSYS || rc == -EACCES)
rc = 0;
return rc;
}
static void fill_LRE_data(struct LRE_eckd_data *data, unsigned int trk,
unsigned int rec_on_trk, int count, int cmd,
struct dasd_device *device, unsigned int reclen,
unsigned int tlf)
{
struct dasd_eckd_private *private;
int sector;
int dn, d;
private = (struct dasd_eckd_private *) device->private;
memset(data, 0, sizeof(*data));
sector = 0;
if (rec_on_trk) {
switch (private->rdc_data.dev_type) {
case 0x3390:
dn = ceil_quot(reclen + 6, 232);
d = 9 + ceil_quot(reclen + 6 * (dn + 1), 34);
sector = (49 + (rec_on_trk - 1) * (10 + d)) / 8;
break;
case 0x3380:
d = 7 + ceil_quot(reclen + 12, 32);
sector = (39 + (rec_on_trk - 1) * (8 + d)) / 7;
break;
}
}
data->sector = sector;
/* note: meaning of count depends on the operation
* for record based I/O it's the number of records, but for
* track based I/O it's the number of tracks
*/
data->count = count;
switch (cmd) {
case DASD_ECKD_CCW_WRITE_HOME_ADDRESS:
data->operation.orientation = 0x3;
data->operation.operation = 0x03;
break;
case DASD_ECKD_CCW_READ_HOME_ADDRESS:
data->operation.orientation = 0x3;
data->operation.operation = 0x16;
break;
case DASD_ECKD_CCW_WRITE_RECORD_ZERO:
data->operation.orientation = 0x1;
data->operation.operation = 0x03;
data->count++;
break;
case DASD_ECKD_CCW_READ_RECORD_ZERO:
data->operation.orientation = 0x3;
data->operation.operation = 0x16;
data->count++;
break;
case DASD_ECKD_CCW_WRITE:
case DASD_ECKD_CCW_WRITE_MT:
case DASD_ECKD_CCW_WRITE_KD:
case DASD_ECKD_CCW_WRITE_KD_MT:
data->auxiliary.length_valid = 0x1;
data->length = reclen;
data->operation.operation = 0x01;
break;
case DASD_ECKD_CCW_WRITE_CKD:
case DASD_ECKD_CCW_WRITE_CKD_MT:
data->auxiliary.length_valid = 0x1;
data->length = reclen;
data->operation.operation = 0x03;
break;
case DASD_ECKD_CCW_WRITE_TRACK_DATA:
data->auxiliary.length_valid = 0x1;
data->length = reclen; /* not tlf, as one might think */
data->operation.operation = 0x3F;
data->extended_operation = 0x23;
break;
case DASD_ECKD_CCW_READ:
case DASD_ECKD_CCW_READ_MT:
case DASD_ECKD_CCW_READ_KD:
case DASD_ECKD_CCW_READ_KD_MT:
data->auxiliary.length_valid = 0x1;
data->length = reclen;
data->operation.operation = 0x06;
break;
case DASD_ECKD_CCW_READ_CKD:
case DASD_ECKD_CCW_READ_CKD_MT:
data->auxiliary.length_valid = 0x1;
data->length = reclen;
data->operation.operation = 0x16;
break;
case DASD_ECKD_CCW_READ_COUNT:
data->operation.operation = 0x06;
break;
case DASD_ECKD_CCW_READ_TRACK_DATA:
data->auxiliary.length_valid = 0x1;
data->length = tlf;
data->operation.operation = 0x0C;
break;
case DASD_ECKD_CCW_ERASE:
data->length = reclen;
data->auxiliary.length_valid = 0x1;
data->operation.operation = 0x0b;
break;
default:
DBF_DEV_EVENT(DBF_ERR, device,
"fill LRE unknown opcode 0x%x", cmd);
BUG();
}
set_ch_t(&data->seek_addr,
trk / private->rdc_data.trk_per_cyl,
trk % private->rdc_data.trk_per_cyl);
data->search_arg.cyl = data->seek_addr.cyl;
data->search_arg.head = data->seek_addr.head;
data->search_arg.record = rec_on_trk;
}
static int prefix_LRE(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
unsigned int trk, unsigned int totrk, int cmd,
struct dasd_device *basedev, struct dasd_device *startdev,
unsigned char format, unsigned int rec_on_trk, int count,
unsigned int blksize, unsigned int tlf)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
{
struct dasd_eckd_private *basepriv, *startpriv;
struct DE_eckd_data *dedata;
struct LRE_eckd_data *lredata;
u32 begcyl, endcyl;
u16 heads, beghead, endhead;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
int rc = 0;
basepriv = (struct dasd_eckd_private *) basedev->private;
startpriv = (struct dasd_eckd_private *) startdev->private;
dedata = &pfxdata->define_extent;
lredata = &pfxdata->locate_record;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
ccw->cmd_code = DASD_ECKD_CCW_PFX;
ccw->flags = 0;
ccw->count = sizeof(*pfxdata);
ccw->cda = (__u32) __pa(pfxdata);
memset(pfxdata, 0, sizeof(*pfxdata));
/* prefix data */
if (format > 1) {
DBF_DEV_EVENT(DBF_ERR, basedev,
"PFX LRE unknown format 0x%x", format);
BUG();
return -EINVAL;
}
pfxdata->format = format;
pfxdata->base_address = basepriv->ned->unit_addr;
pfxdata->base_lss = basepriv->ned->ID;
pfxdata->validity.define_extent = 1;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* private uid is kept up to date, conf_data may be outdated */
if (startpriv->uid.type != UA_BASE_DEVICE) {
pfxdata->validity.verify_base = 1;
if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
pfxdata->validity.hyper_pav = 1;
}
/* define extend data (mostly)*/
switch (cmd) {
case DASD_ECKD_CCW_READ_HOME_ADDRESS:
case DASD_ECKD_CCW_READ_RECORD_ZERO:
case DASD_ECKD_CCW_READ:
case DASD_ECKD_CCW_READ_MT:
case DASD_ECKD_CCW_READ_CKD:
case DASD_ECKD_CCW_READ_CKD_MT:
case DASD_ECKD_CCW_READ_KD:
case DASD_ECKD_CCW_READ_KD_MT:
case DASD_ECKD_CCW_READ_COUNT:
dedata->mask.perm = 0x1;
dedata->attributes.operation = basepriv->attrib.operation;
break;
case DASD_ECKD_CCW_READ_TRACK_DATA:
dedata->mask.perm = 0x1;
dedata->attributes.operation = basepriv->attrib.operation;
dedata->blk_size = 0;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
break;
case DASD_ECKD_CCW_WRITE:
case DASD_ECKD_CCW_WRITE_MT:
case DASD_ECKD_CCW_WRITE_KD:
case DASD_ECKD_CCW_WRITE_KD_MT:
dedata->mask.perm = 0x02;
dedata->attributes.operation = basepriv->attrib.operation;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
rc = check_XRC_on_prefix(pfxdata, basedev);
break;
case DASD_ECKD_CCW_WRITE_CKD:
case DASD_ECKD_CCW_WRITE_CKD_MT:
dedata->attributes.operation = DASD_BYPASS_CACHE;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
rc = check_XRC_on_prefix(pfxdata, basedev);
break;
case DASD_ECKD_CCW_ERASE:
case DASD_ECKD_CCW_WRITE_HOME_ADDRESS:
case DASD_ECKD_CCW_WRITE_RECORD_ZERO:
dedata->mask.perm = 0x3;
dedata->mask.auth = 0x1;
dedata->attributes.operation = DASD_BYPASS_CACHE;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
rc = check_XRC_on_prefix(pfxdata, basedev);
break;
case DASD_ECKD_CCW_WRITE_TRACK_DATA:
dedata->mask.perm = 0x02;
dedata->attributes.operation = basepriv->attrib.operation;
dedata->blk_size = blksize;
rc = check_XRC_on_prefix(pfxdata, basedev);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
break;
default:
DBF_DEV_EVENT(DBF_ERR, basedev,
"PFX LRE unknown opcode 0x%x", cmd);
BUG();
return -EINVAL;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
}
dedata->attributes.mode = 0x3; /* ECKD */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if ((basepriv->rdc_data.cu_type == 0x2105 ||
basepriv->rdc_data.cu_type == 0x2107 ||
basepriv->rdc_data.cu_type == 0x1750)
&& !(basepriv->uses_cdl && trk < 2))
dedata->ga_extended |= 0x40; /* Regular Data Format Mode */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
heads = basepriv->rdc_data.trk_per_cyl;
begcyl = trk / heads;
beghead = trk % heads;
endcyl = totrk / heads;
endhead = totrk % heads;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* check for sequential prestage - enhance cylinder range */
if (dedata->attributes.operation == DASD_SEQ_PRESTAGE ||
dedata->attributes.operation == DASD_SEQ_ACCESS) {
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (endcyl + basepriv->attrib.nr_cyl < basepriv->real_cyl)
endcyl += basepriv->attrib.nr_cyl;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
else
endcyl = (basepriv->real_cyl - 1);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
}
set_ch_t(&dedata->beg_ext, begcyl, beghead);
set_ch_t(&dedata->end_ext, endcyl, endhead);
if (format == 1) {
fill_LRE_data(lredata, trk, rec_on_trk, count, cmd,
basedev, blksize, tlf);
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return rc;
}
static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
unsigned int trk, unsigned int totrk, int cmd,
struct dasd_device *basedev, struct dasd_device *startdev)
{
return prefix_LRE(ccw, pfxdata, trk, totrk, cmd, basedev, startdev,
0, 0, 0, 0, 0);
}
static void
locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, unsigned int trk,
unsigned int rec_on_trk, int no_rec, int cmd,
struct dasd_device * device, int reclen)
{
struct dasd_eckd_private *private;
int sector;
int dn, d;
private = (struct dasd_eckd_private *) device->private;
DBF_DEV_EVENT(DBF_INFO, device,
"Locate: trk %d, rec %d, no_rec %d, cmd %d, reclen %d",
trk, rec_on_trk, no_rec, cmd, reclen);
ccw->cmd_code = DASD_ECKD_CCW_LOCATE_RECORD;
ccw->flags = 0;
ccw->count = 16;
ccw->cda = (__u32) __pa(data);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
memset(data, 0, sizeof(struct LO_eckd_data));
sector = 0;
if (rec_on_trk) {
switch (private->rdc_data.dev_type) {
case 0x3390:
dn = ceil_quot(reclen + 6, 232);
d = 9 + ceil_quot(reclen + 6 * (dn + 1), 34);
sector = (49 + (rec_on_trk - 1) * (10 + d)) / 8;
break;
case 0x3380:
d = 7 + ceil_quot(reclen + 12, 32);
sector = (39 + (rec_on_trk - 1) * (8 + d)) / 7;
break;
}
}
data->sector = sector;
data->count = no_rec;
switch (cmd) {
case DASD_ECKD_CCW_WRITE_HOME_ADDRESS:
data->operation.orientation = 0x3;
data->operation.operation = 0x03;
break;
case DASD_ECKD_CCW_READ_HOME_ADDRESS:
data->operation.orientation = 0x3;
data->operation.operation = 0x16;
break;
case DASD_ECKD_CCW_WRITE_RECORD_ZERO:
data->operation.orientation = 0x1;
data->operation.operation = 0x03;
data->count++;
break;
case DASD_ECKD_CCW_READ_RECORD_ZERO:
data->operation.orientation = 0x3;
data->operation.operation = 0x16;
data->count++;
break;
case DASD_ECKD_CCW_WRITE:
case DASD_ECKD_CCW_WRITE_MT:
case DASD_ECKD_CCW_WRITE_KD:
case DASD_ECKD_CCW_WRITE_KD_MT:
data->auxiliary.last_bytes_used = 0x1;
data->length = reclen;
data->operation.operation = 0x01;
break;
case DASD_ECKD_CCW_WRITE_CKD:
case DASD_ECKD_CCW_WRITE_CKD_MT:
data->auxiliary.last_bytes_used = 0x1;
data->length = reclen;
data->operation.operation = 0x03;
break;
case DASD_ECKD_CCW_READ:
case DASD_ECKD_CCW_READ_MT:
case DASD_ECKD_CCW_READ_KD:
case DASD_ECKD_CCW_READ_KD_MT:
data->auxiliary.last_bytes_used = 0x1;
data->length = reclen;
data->operation.operation = 0x06;
break;
case DASD_ECKD_CCW_READ_CKD:
case DASD_ECKD_CCW_READ_CKD_MT:
data->auxiliary.last_bytes_used = 0x1;
data->length = reclen;
data->operation.operation = 0x16;
break;
case DASD_ECKD_CCW_READ_COUNT:
data->operation.operation = 0x06;
break;
case DASD_ECKD_CCW_ERASE:
data->length = reclen;
data->auxiliary.last_bytes_used = 0x1;
data->operation.operation = 0x0b;
break;
default:
DBF_DEV_EVENT(DBF_ERR, device, "unknown locate record "
"opcode 0x%x", cmd);
}
set_ch_t(&data->seek_addr,
trk / private->rdc_data.trk_per_cyl,
trk % private->rdc_data.trk_per_cyl);
data->search_arg.cyl = data->seek_addr.cyl;
data->search_arg.head = data->seek_addr.head;
data->search_arg.record = rec_on_trk;
}
/*
* Returns 1 if the block is one of the special blocks that needs
* to get read/written with the KD variant of the command.
* That is DASD_ECKD_READ_KD_MT instead of DASD_ECKD_READ_MT and
* DASD_ECKD_WRITE_KD_MT instead of DASD_ECKD_WRITE_MT.
* Luckily the KD variants differ only by one bit (0x08) from the
* normal variant. So don't wonder about code like:
* if (dasd_eckd_cdl_special(blk_per_trk, recid))
* ccw->cmd_code |= 0x8;
*/
static inline int
dasd_eckd_cdl_special(int blk_per_trk, int recid)
{
if (recid < 3)
return 1;
if (recid < blk_per_trk)
return 0;
if (recid < 2 * blk_per_trk)
return 1;
return 0;
}
/*
* Returns the record size for the special blocks of the cdl format.
* Only returns something useful if dasd_eckd_cdl_special is true
* for the recid.
*/
static inline int
dasd_eckd_cdl_reclen(int recid)
{
if (recid < 3)
return sizes_trk0[recid];
return LABEL_SIZE;
}
/*
* Generate device unique id that specifies the physical device.
*/
static int dasd_eckd_generate_uid(struct dasd_device *device,
struct dasd_uid *uid)
{
struct dasd_eckd_private *private;
int count;
private = (struct dasd_eckd_private *) device->private;
if (!private)
return -ENODEV;
if (!private->ned || !private->gneq)
return -ENODEV;
memset(uid, 0, sizeof(struct dasd_uid));
memcpy(uid->vendor, private->ned->HDA_manufacturer,
sizeof(uid->vendor) - 1);
EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
memcpy(uid->serial, private->ned->HDA_location,
sizeof(uid->serial) - 1);
EBCASC(uid->serial, sizeof(uid->serial) - 1);
uid->ssid = private->gneq->subsystemID;
uid->real_unit_addr = private->ned->unit_addr;;
if (private->sneq) {
uid->type = private->sneq->sua_flags;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (uid->type == UA_BASE_PAV_ALIAS)
uid->base_unit_addr = private->sneq->base_unit_addr;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
} else {
uid->type = UA_BASE_DEVICE;
}
if (private->vdsneq) {
for (count = 0; count < 16; count++) {
sprintf(uid->vduit+2*count, "%02x",
private->vdsneq->uit[count]);
}
}
return 0;
}
static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device,
void *rcd_buffer,
struct ciw *ciw, __u8 lpm)
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
cqr = dasd_smalloc_request("ECKD", 1 /* RCD */, ciw->count, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate RCD request");
return cqr;
}
ccw = cqr->cpaddr;
ccw->cmd_code = ciw->cmd;
ccw->cda = (__u32)(addr_t)rcd_buffer;
ccw->count = ciw->count;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
cqr->expires = 10*HZ;
cqr->lpm = lpm;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->retries = 2;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
void **rcd_buffer,
int *rcd_buffer_size, __u8 lpm)
{
struct ciw *ciw;
char *rcd_buf = NULL;
int ret;
struct dasd_ccw_req *cqr;
/*
* scan for RCD command in extended SenseID data
*/
ciw = ccw_device_get_ciw(device->cdev, CIW_TYPE_RCD);
if (!ciw || ciw->cmd == 0) {
ret = -EOPNOTSUPP;
goto out_error;
}
rcd_buf = kzalloc(ciw->count, GFP_KERNEL | GFP_DMA);
if (!rcd_buf) {
ret = -ENOMEM;
goto out_error;
}
/*
* buffer has to start with EBCDIC "V1.0" to show
* support for virtual device SNEQ
*/
rcd_buf[0] = 0xE5;
rcd_buf[1] = 0xF1;
rcd_buf[2] = 0x4B;
rcd_buf[3] = 0xF0;
cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
if (IS_ERR(cqr)) {
ret = PTR_ERR(cqr);
goto out_error;
}
ret = dasd_sleep_on(cqr);
/*
* on success we update the user input parms
*/
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
if (ret)
goto out_error;
*rcd_buffer_size = ciw->count;
*rcd_buffer = rcd_buf;
return 0;
out_error:
kfree(rcd_buf);
*rcd_buffer = NULL;
*rcd_buffer_size = 0;
return ret;
}
static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
{
struct dasd_sneq *sneq;
int i, count;
private->ned = NULL;
private->sneq = NULL;
private->vdsneq = NULL;
private->gneq = NULL;
count = private->conf_len / sizeof(struct dasd_sneq);
sneq = (struct dasd_sneq *)private->conf_data;
for (i = 0; i < count; ++i) {
if (sneq->flags.identifier == 1 && sneq->format == 1)
private->sneq = sneq;
else if (sneq->flags.identifier == 1 && sneq->format == 4)
private->vdsneq = (struct vd_sneq *)sneq;
else if (sneq->flags.identifier == 2)
private->gneq = (struct dasd_gneq *)sneq;
else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
private->ned = (struct dasd_ned *)sneq;
sneq++;
}
if (!private->ned || !private->gneq) {
private->ned = NULL;
private->sneq = NULL;
private->vdsneq = NULL;
private->gneq = NULL;
return -EINVAL;
}
return 0;
};
static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
{
struct dasd_gneq *gneq;
int i, count, found;
count = conf_len / sizeof(*gneq);
gneq = (struct dasd_gneq *)conf_data;
found = 0;
for (i = 0; i < count; ++i) {
if (gneq->flags.identifier == 2) {
found = 1;
break;
}
gneq++;
}
if (found)
return ((char *)gneq)[18] & 0x07;
else
return 0;
}
static int dasd_eckd_read_conf(struct dasd_device *device)
{
void *conf_data;
int conf_len, conf_data_saved;
int rc;
__u8 lpm;
struct dasd_eckd_private *private;
struct dasd_eckd_path *path_data;
private = (struct dasd_eckd_private *) device->private;
path_data = (struct dasd_eckd_path *) &private->path_data;
path_data->opm = ccw_device_get_path_mask(device->cdev);
lpm = 0x80;
conf_data_saved = 0;
/* get configuration data per operational path */
for (lpm = 0x80; lpm; lpm>>= 1) {
if (lpm & path_data->opm){
rc = dasd_eckd_read_conf_lpm(device, &conf_data,
&conf_len, lpm);
if (rc && rc != -EOPNOTSUPP) { /* -EOPNOTSUPP is ok */
DBF_EVENT(DBF_WARNING,
"Read configuration data returned "
"error %d for device: %s", rc,
dev_name(&device->cdev->dev));
return rc;
}
if (conf_data == NULL) {
DBF_EVENT(DBF_WARNING, "No configuration "
"data retrieved for device: %s",
dev_name(&device->cdev->dev));
continue; /* no error */
}
/* save first valid configuration data */
if (!conf_data_saved) {
kfree(private->conf_data);
private->conf_data = conf_data;
private->conf_len = conf_len;
if (dasd_eckd_identify_conf_parts(private)) {
private->conf_data = NULL;
private->conf_len = 0;
kfree(conf_data);
continue;
}
conf_data_saved++;
}
switch (dasd_eckd_path_access(conf_data, conf_len)) {
case 0x02:
path_data->npm |= lpm;
break;
case 0x03:
path_data->ppm |= lpm;
break;
}
if (conf_data != private->conf_data)
kfree(conf_data);
}
}
return 0;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static int dasd_eckd_read_features(struct dasd_device *device)
{
struct dasd_psf_prssd_data *prssdp;
struct dasd_rssd_features *features;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
int rc;
struct dasd_eckd_private *private;
private = (struct dasd_eckd_private *) device->private;
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
1 /* PSF */ + 1 /* RSSD */ ,
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_features)),
device);
if (IS_ERR(cqr)) {
DBF_EVENT(DBF_WARNING, "Could not allocate initialization "
"request for device: %s",
dev_name(&device->cdev->dev));
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return PTR_ERR(cqr);
}
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->retries = 5;
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
prssdp = (struct dasd_psf_prssd_data *) cqr->data;
memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data));
prssdp->order = PSF_ORDER_PRSSD;
prssdp->suborder = 0x41; /* Read Feature Codes */
/* all other bytes of prssdp must be zero */
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_PSF;
ccw->count = sizeof(struct dasd_psf_prssd_data);
ccw->flags |= CCW_FLAG_CC;
ccw->cda = (__u32)(addr_t) prssdp;
/* Read Subsystem Data - feature codes */
features = (struct dasd_rssd_features *) (prssdp + 1);
memset(features, 0, sizeof(struct dasd_rssd_features));
ccw++;
ccw->cmd_code = DASD_ECKD_CCW_RSSD;
ccw->count = sizeof(struct dasd_rssd_features);
ccw->cda = (__u32)(addr_t) features;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
rc = dasd_sleep_on(cqr);
if (rc == 0) {
prssdp = (struct dasd_psf_prssd_data *) cqr->data;
features = (struct dasd_rssd_features *) (prssdp + 1);
memcpy(&private->features, features,
sizeof(struct dasd_rssd_features));
}
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Build CP for Perform Subsystem Function - SSC.
*/
static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device,
int enable_pav)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_ccw_req *cqr;
struct dasd_psf_ssc_data *psf_ssc_data;
struct ccw1 *ccw;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr = dasd_smalloc_request("ECKD", 1 /* PSF */ ,
sizeof(struct dasd_psf_ssc_data),
device);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate PSF-SSC request");
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return cqr;
}
psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data;
psf_ssc_data->order = PSF_ORDER_SSC;
psf_ssc_data->suborder = 0x40;
if (enable_pav) {
psf_ssc_data->suborder |= 0x88;
psf_ssc_data->reserved[0] = 0x88;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_PSF;
ccw->cda = (__u32)(addr_t)psf_ssc_data;
ccw->count = 66;
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
cqr->expires = 10*HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
/*
* Perform Subsystem Function.
* It is necessary to trigger CIO for channel revalidation since this
* call might change behaviour of DASD devices.
*/
static int
dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_ccw_req *cqr;
int rc;
cqr = dasd_eckd_build_psf_ssc(device, enable_pav);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (IS_ERR(cqr))
return PTR_ERR(cqr);
rc = dasd_sleep_on(cqr);
if (!rc)
/* trigger CIO to reprobe devices */
css_schedule_reprobe();
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Valide storage server of current device.
*/
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static int dasd_eckd_validate_server(struct dasd_device *device)
{
int rc;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_eckd_private *private;
int enable_pav;
if (dasd_nopav || MACHINE_IS_VM)
enable_pav = 0;
else
enable_pav = 1;
rc = dasd_eckd_psf_ssc(device, enable_pav);
/* may be requested feature is not available on server,
* therefore just report error and go ahead */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
private = (struct dasd_eckd_private *) device->private;
DBF_EVENT(DBF_WARNING, "PSF-SSC on storage subsystem %s.%s.%04x "
"returned rc=%d for device: %s",
private->uid.vendor, private->uid.serial,
private->uid.ssid, rc, dev_name(&device->cdev->dev));
/* RE-Read Configuration Data */
return dasd_eckd_read_conf(device);
}
/*
* Check device characteristics.
* If the device is accessible using ECKD discipline, the device is enabled.
*/
static int
dasd_eckd_check_characteristics(struct dasd_device *device)
{
struct dasd_eckd_private *private;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_block *block;
void *rdc_data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
int is_known, rc;
private = (struct dasd_eckd_private *) device->private;
if (private == NULL) {
private = kzalloc(sizeof(struct dasd_eckd_private),
GFP_KERNEL | GFP_DMA);
if (private == NULL) {
dev_warn(&device->cdev->dev,
"Allocating memory for private DASD data "
"failed\n");
return -ENOMEM;
}
device->private = (void *) private;
}
/* Invalidate status of initial analysis. */
private->init_cqr_status = -1;
/* Set default cache operations. */
private->attrib.operation = DASD_NORMAL_CACHE;
private->attrib.nr_cyl = 0;
/* Read Configuration Data */
rc = dasd_eckd_read_conf(device);
if (rc)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
goto out_err1;
/* Generate device unique id and register in devmap */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
rc = dasd_eckd_generate_uid(device, &private->uid);
if (rc)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
goto out_err1;
dasd_set_uid(device->cdev, &private->uid);
if (private->uid.type == UA_BASE_DEVICE) {
block = dasd_alloc_block();
if (IS_ERR(block)) {
DBF_EVENT(DBF_WARNING, "could not allocate dasd "
"block structure for device: %s",
dev_name(&device->cdev->dev));
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
rc = PTR_ERR(block);
goto out_err1;
}
device->block = block;
block->base = device;
}
/* register lcu with alias handling, enable PAV if this is a new lcu */
is_known = dasd_alias_make_device_known_to_lcu(device);
if (is_known < 0) {
rc = is_known;
goto out_err2;
}
if (!is_known) {
/* new lcu found */
rc = dasd_eckd_validate_server(device); /* will switch pav on */
if (rc)
goto out_err3;
}
/* Read Feature Codes */
rc = dasd_eckd_read_features(device);
if (rc)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
goto out_err3;
/* Read Device Characteristics */
rdc_data = (void *) &(private->rdc_data);
memset(rdc_data, 0, sizeof(rdc_data));
rc = dasd_generic_read_dev_chars(device, "ECKD", &rdc_data, 64);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (rc) {
DBF_EVENT(DBF_WARNING,
"Read device characteristics failed, rc=%d for "
"device: %s", rc, dev_name(&device->cdev->dev));
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
goto out_err3;
}
/* find the vaild cylinder size */
if (private->rdc_data.no_cyl == LV_COMPAT_CYL &&
private->rdc_data.long_no_cyl)
private->real_cyl = private->rdc_data.long_no_cyl;
else
private->real_cyl = private->rdc_data.no_cyl;
dev_info(&device->cdev->dev, "New DASD %04X/%02X (CU %04X/%02X) "
"with %d cylinders, %d heads, %d sectors\n",
private->rdc_data.dev_type,
private->rdc_data.dev_model,
private->rdc_data.cu_type,
private->rdc_data.cu_model.model,
private->real_cyl,
private->rdc_data.trk_per_cyl,
private->rdc_data.sec_per_trk);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return 0;
out_err3:
dasd_alias_disconnect_device_from_lcu(device);
out_err2:
dasd_free_block(device->block);
device->block = NULL;
out_err1:
kfree(private->conf_data);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
kfree(device->private);
device->private = NULL;
return rc;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static void dasd_eckd_uncheck_device(struct dasd_device *device)
{
struct dasd_eckd_private *private;
private = (struct dasd_eckd_private *) device->private;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_alias_disconnect_device_from_lcu(device);
private->ned = NULL;
private->sneq = NULL;
private->vdsneq = NULL;
private->gneq = NULL;
private->conf_len = 0;
kfree(private->conf_data);
private->conf_data = NULL;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
}
static struct dasd_ccw_req *
dasd_eckd_analysis_ccw(struct dasd_device *device)
{
struct dasd_eckd_private *private;
struct eckd_count *count_data;
struct LO_eckd_data *LO_data;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
int cplength, datasize;
int i;
private = (struct dasd_eckd_private *) device->private;
cplength = 8;
datasize = sizeof(struct DE_eckd_data) + 2*sizeof(struct LO_eckd_data);
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
cplength, datasize, device);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
/* Define extent for the first 3 tracks. */
define_extent(ccw++, cqr->data, 0, 2,
DASD_ECKD_CCW_READ_COUNT, device);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
LO_data = cqr->data + sizeof(struct DE_eckd_data);
/* Locate record for the first 4 records on track 0. */
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++, 0, 0, 4,
DASD_ECKD_CCW_READ_COUNT, device, 0);
count_data = private->count_area;
for (i = 0; i < 4; i++) {
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = DASD_ECKD_CCW_READ_COUNT;
ccw->flags = 0;
ccw->count = 8;
ccw->cda = (__u32)(addr_t) count_data;
ccw++;
count_data++;
}
/* Locate record for the first record on track 2. */
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++, 2, 0, 1,
DASD_ECKD_CCW_READ_COUNT, device, 0);
/* Read count ccw. */
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = DASD_ECKD_CCW_READ_COUNT;
ccw->flags = 0;
ccw->count = 8;
ccw->cda = (__u32)(addr_t) count_data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->block = NULL;
cqr->startdev = device;
cqr->memdev = device;
cqr->retries = 0;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
/*
* This is the callback function for the init_analysis cqr. It saves
* the status of the initial analysis ccw before it frees it and kicks
* the device to continue the startup sequence. This will call
* dasd_eckd_do_analysis again (if the devices has not been marked
* for deletion in the meantime).
*/
static void
dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data)
{
struct dasd_eckd_private *private;
struct dasd_device *device;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
device = init_cqr->startdev;
private = (struct dasd_eckd_private *) device->private;
private->init_cqr_status = init_cqr->status;
dasd_sfree_request(init_cqr, device);
dasd_kick_device(device);
}
static int
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_eckd_start_analysis(struct dasd_block *block)
{
struct dasd_eckd_private *private;
struct dasd_ccw_req *init_cqr;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
private = (struct dasd_eckd_private *) block->base->private;
init_cqr = dasd_eckd_analysis_ccw(block->base);
if (IS_ERR(init_cqr))
return PTR_ERR(init_cqr);
init_cqr->callback = dasd_eckd_analysis_callback;
init_cqr->callback_data = NULL;
init_cqr->expires = 5*HZ;
dasd_add_request_head(init_cqr);
return -EAGAIN;
}
static int
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_eckd_end_analysis(struct dasd_block *block)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_device *device;
struct dasd_eckd_private *private;
struct eckd_count *count_area;
unsigned int sb, blk_per_trk;
int status, i;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
device = block->base;
private = (struct dasd_eckd_private *) device->private;
status = private->init_cqr_status;
private->init_cqr_status = -1;
if (status != DASD_CQR_DONE) {
dev_warn(&device->cdev->dev,
"The DASD is not formatted\n");
return -EMEDIUMTYPE;
}
private->uses_cdl = 1;
/* Check Track 0 for Compatible Disk Layout */
count_area = NULL;
for (i = 0; i < 3; i++) {
if (private->count_area[i].kl != 4 ||
private->count_area[i].dl != dasd_eckd_cdl_reclen(i) - 4) {
private->uses_cdl = 0;
break;
}
}
if (i == 3)
count_area = &private->count_area[4];
if (private->uses_cdl == 0) {
for (i = 0; i < 5; i++) {
if ((private->count_area[i].kl != 0) ||
(private->count_area[i].dl !=
private->count_area[0].dl))
break;
}
if (i == 5)
count_area = &private->count_area[0];
} else {
if (private->count_area[3].record == 1)
dev_warn(&device->cdev->dev,
"Track 0 has no records following the VTOC\n");
}
if (count_area != NULL && count_area->kl == 0) {
/* we found notthing violating our disk layout */
if (dasd_check_blocksize(count_area->dl) == 0)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
block->bp_block = count_area->dl;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (block->bp_block == 0) {
dev_warn(&device->cdev->dev,
"The disk layout of the DASD is not supported\n");
return -EMEDIUMTYPE;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
block->s2b_shift = 0; /* bits to shift 512 to get a block */
for (sb = 512; sb < block->bp_block; sb = sb << 1)
block->s2b_shift++;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
block->blocks = (private->real_cyl *
private->rdc_data.trk_per_cyl *
blk_per_trk);
dev_info(&device->cdev->dev,
"DASD with %d KB/block, %d KB total size, %d KB/track, "
"%s\n", (block->bp_block >> 10),
((private->real_cyl *
private->rdc_data.trk_per_cyl *
blk_per_trk * (block->bp_block >> 9)) >> 1),
((blk_per_trk * block->bp_block) >> 10),
private->uses_cdl ?
"compatible disk layout" : "linux disk layout");
return 0;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static int dasd_eckd_do_analysis(struct dasd_block *block)
{
struct dasd_eckd_private *private;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
private = (struct dasd_eckd_private *) block->base->private;
if (private->init_cqr_status < 0)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return dasd_eckd_start_analysis(block);
else
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return dasd_eckd_end_analysis(block);
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static int dasd_eckd_ready_to_online(struct dasd_device *device)
{
return dasd_alias_add_device(device);
};
static int dasd_eckd_online_to_ready(struct dasd_device *device)
{
return dasd_alias_remove_device(device);
};
static int
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_eckd_fill_geometry(struct dasd_block *block, struct hd_geometry *geo)
{
struct dasd_eckd_private *private;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
private = (struct dasd_eckd_private *) block->base->private;
if (dasd_check_blocksize(block->bp_block) == 0) {
geo->sectors = recs_per_track(&private->rdc_data,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
0, block->bp_block);
}
geo->cylinders = private->rdc_data.no_cyl;
geo->heads = private->rdc_data.trk_per_cyl;
return 0;
}
static struct dasd_ccw_req *
dasd_eckd_format_device(struct dasd_device * device,
struct format_data_t * fdata)
{
struct dasd_eckd_private *private;
struct dasd_ccw_req *fcp;
struct eckd_count *ect;
struct ccw1 *ccw;
void *data;
int rpt;
struct ch_t address;
int cplength, datasize;
int i;
int intensity = 0;
int r0_perm;
private = (struct dasd_eckd_private *) device->private;
rpt = recs_per_track(&private->rdc_data, 0, fdata->blksize);
set_ch_t(&address,
fdata->start_unit / private->rdc_data.trk_per_cyl,
fdata->start_unit % private->rdc_data.trk_per_cyl);
/* Sanity checks. */
if (fdata->start_unit >=
(private->real_cyl * private->rdc_data.trk_per_cyl)) {
dev_warn(&device->cdev->dev, "Start track number %d used in "
"formatting is too big\n", fdata->start_unit);
return ERR_PTR(-EINVAL);
}
if (fdata->start_unit > fdata->stop_unit) {
dev_warn(&device->cdev->dev, "Start track %d used in "
"formatting exceeds end track\n", fdata->start_unit);
return ERR_PTR(-EINVAL);
}
if (dasd_check_blocksize(fdata->blksize) != 0) {
dev_warn(&device->cdev->dev,
"The DASD cannot be formatted with block size %d\n",
fdata->blksize);
return ERR_PTR(-EINVAL);
}
/*
* fdata->intensity is a bit string that tells us what to do:
* Bit 0: write record zero
* Bit 1: write home address, currently not supported
* Bit 2: invalidate tracks
* Bit 3: use OS/390 compatible disk layout (cdl)
* Bit 4: do not allow storage subsystem to modify record zero
* Only some bit combinations do make sense.
*/
if (fdata->intensity & 0x10) {
r0_perm = 0;
intensity = fdata->intensity & ~0x10;
} else {
r0_perm = 1;
intensity = fdata->intensity;
}
switch (intensity) {
case 0x00: /* Normal format */
case 0x08: /* Normal format, use cdl. */
cplength = 2 + rpt;
datasize = sizeof(struct DE_eckd_data) +
sizeof(struct LO_eckd_data) +
rpt * sizeof(struct eckd_count);
break;
case 0x01: /* Write record zero and format track. */
case 0x09: /* Write record zero and format track, use cdl. */
cplength = 3 + rpt;
datasize = sizeof(struct DE_eckd_data) +
sizeof(struct LO_eckd_data) +
sizeof(struct eckd_count) +
rpt * sizeof(struct eckd_count);
break;
case 0x04: /* Invalidate track. */
case 0x0c: /* Invalidate track, use cdl. */
cplength = 3;
datasize = sizeof(struct DE_eckd_data) +
sizeof(struct LO_eckd_data) +
sizeof(struct eckd_count);
break;
default:
dev_warn(&device->cdev->dev, "An I/O control call used "
"incorrect flags 0x%x\n", fdata->intensity);
return ERR_PTR(-EINVAL);
}
/* Allocate the format ccw request. */
fcp = dasd_smalloc_request(dasd_eckd_discipline.name,
cplength, datasize, device);
if (IS_ERR(fcp))
return fcp;
data = fcp->data;
ccw = fcp->cpaddr;
switch (intensity & ~0x08) {
case 0x00: /* Normal format. */
define_extent(ccw++, (struct DE_eckd_data *) data,
fdata->start_unit, fdata->start_unit,
DASD_ECKD_CCW_WRITE_CKD, device);
/* grant subsystem permission to format R0 */
if (r0_perm)
((struct DE_eckd_data *)data)->ga_extended |= 0x04;
data += sizeof(struct DE_eckd_data);
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, (struct LO_eckd_data *) data,
fdata->start_unit, 0, rpt,
DASD_ECKD_CCW_WRITE_CKD, device,
fdata->blksize);
data += sizeof(struct LO_eckd_data);
break;
case 0x01: /* Write record zero + format track. */
define_extent(ccw++, (struct DE_eckd_data *) data,
fdata->start_unit, fdata->start_unit,
DASD_ECKD_CCW_WRITE_RECORD_ZERO,
device);
data += sizeof(struct DE_eckd_data);
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, (struct LO_eckd_data *) data,
fdata->start_unit, 0, rpt + 1,
DASD_ECKD_CCW_WRITE_RECORD_ZERO, device,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
device->block->bp_block);
data += sizeof(struct LO_eckd_data);
break;
case 0x04: /* Invalidate track. */
define_extent(ccw++, (struct DE_eckd_data *) data,
fdata->start_unit, fdata->start_unit,
DASD_ECKD_CCW_WRITE_CKD, device);
data += sizeof(struct DE_eckd_data);
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, (struct LO_eckd_data *) data,
fdata->start_unit, 0, 1,
DASD_ECKD_CCW_WRITE_CKD, device, 8);
data += sizeof(struct LO_eckd_data);
break;
}
if (intensity & 0x01) { /* write record zero */
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
ect->cyl = address.cyl;
ect->head = address.head;
ect->record = 0;
ect->kl = 0;
ect->dl = 8;
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = DASD_ECKD_CCW_WRITE_RECORD_ZERO;
ccw->flags = CCW_FLAG_SLI;
ccw->count = 8;
ccw->cda = (__u32)(addr_t) ect;
ccw++;
}
if ((intensity & ~0x08) & 0x04) { /* erase track */
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
ect->cyl = address.cyl;
ect->head = address.head;
ect->record = 1;
ect->kl = 0;
ect->dl = 0;
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = DASD_ECKD_CCW_WRITE_CKD;
ccw->flags = CCW_FLAG_SLI;
ccw->count = 8;
ccw->cda = (__u32)(addr_t) ect;
} else { /* write remaining records */
for (i = 0; i < rpt; i++) {
ect = (struct eckd_count *) data;
data += sizeof(struct eckd_count);
ect->cyl = address.cyl;
ect->head = address.head;
ect->record = i + 1;
ect->kl = 0;
ect->dl = fdata->blksize;
/* Check for special tracks 0-1 when formatting CDL */
if ((intensity & 0x08) &&
fdata->start_unit == 0) {
if (i < 3) {
ect->kl = 4;
ect->dl = sizes_trk0[i] - 4;
}
}
if ((intensity & 0x08) &&
fdata->start_unit == 1) {
ect->kl = 44;
ect->dl = LABEL_SIZE - 44;
}
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = DASD_ECKD_CCW_WRITE_CKD;
ccw->flags = CCW_FLAG_SLI;
ccw->count = 8;
ccw->cda = (__u32)(addr_t) ect;
ccw++;
}
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
fcp->startdev = device;
fcp->memdev = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &fcp->flags);
fcp->retries = 5; /* set retry counter to enable default ERP */
fcp->buildclk = get_clock();
fcp->status = DASD_CQR_FILLED;
return fcp;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static void dasd_eckd_handle_terminated_request(struct dasd_ccw_req *cqr)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->status = DASD_CQR_FILLED;
if (cqr->block && (cqr->startdev != cqr->block->base)) {
dasd_eckd_reset_ccw_to_base_io(cqr);
cqr->startdev = cqr->block->base;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
};
static dasd_erp_fn_t
dasd_eckd_erp_action(struct dasd_ccw_req * cqr)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_device *device = (struct dasd_device *) cqr->startdev;
struct ccw_device *cdev = device->cdev;
switch (cdev->id.cu_type) {
case 0x3990:
case 0x2105:
case 0x2107:
case 0x1750:
return dasd_3990_erp_action;
case 0x9343:
case 0x3880:
default:
return dasd_default_erp_action;
}
}
static dasd_erp_fn_t
dasd_eckd_erp_postaction(struct dasd_ccw_req * cqr)
{
return dasd_default_erp_postaction;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device,
struct irb *irb)
{
char mask;
char *sense = NULL;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* first of all check for state change pending interrupt */
mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP;
if ((scsw_dstat(&irb->scsw) & mask) == mask) {
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_generic_handle_state_change(device);
return;
}
/* summary unit check */
if ((scsw_dstat(&irb->scsw) & DEV_STAT_UNIT_CHECK) &&
(irb->ecw[7] == 0x0D)) {
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_alias_handle_summary_unit_check(device, irb);
return;
}
sense = dasd_get_sense(irb);
/* service information message SIM */
if (sense && !(sense[27] & DASD_SENSE_BIT_0) &&
((sense[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE)) {
dasd_3990_erp_handle_sim(device, sense);
dasd_schedule_device_bh(device);
return;
}
if ((scsw_cc(&irb->scsw) == 1) &&
(scsw_fctl(&irb->scsw) & SCSW_FCTL_START_FUNC) &&
(scsw_actl(&irb->scsw) & SCSW_ACTL_START_PEND) &&
(scsw_stctl(&irb->scsw) & SCSW_STCTL_STATUS_PEND)) {
/* fake irb do nothing, they are handled elsewhere */
dasd_schedule_device_bh(device);
return;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (!sense) {
/* just report other unsolicited interrupts */
DBF_DEV_EVENT(DBF_ERR, device, "%s",
"unsolicited interrupt received");
} else {
DBF_DEV_EVENT(DBF_ERR, device, "%s",
"unsolicited interrupt received "
"(sense available)");
device->discipline->dump_sense_dbf(device, NULL, irb,
"unsolicited");
}
dasd_schedule_device_bh(device);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
return;
};
static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single(
struct dasd_device *startdev,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_block *block,
struct request *req,
sector_t first_rec,
sector_t last_rec,
sector_t first_trk,
sector_t last_trk,
unsigned int first_offs,
unsigned int last_offs,
unsigned int blk_per_trk,
unsigned int blksize)
{
struct dasd_eckd_private *private;
unsigned long *idaws;
struct LO_eckd_data *LO_data;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
struct req_iterator iter;
struct bio_vec *bv;
char *dst;
unsigned int off;
int count, cidaw, cplength, datasize;
sector_t recid;
unsigned char cmd, rcmd;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
int use_prefix;
struct dasd_device *basedev;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
basedev = block->base;
private = (struct dasd_eckd_private *) basedev->private;
if (rq_data_dir(req) == READ)
cmd = DASD_ECKD_CCW_READ_MT;
else if (rq_data_dir(req) == WRITE)
cmd = DASD_ECKD_CCW_WRITE_MT;
else
return ERR_PTR(-EINVAL);
/* Check struct bio and count the number of blocks for the request. */
count = 0;
cidaw = 0;
rq_for_each_segment(bv, req, iter) {
if (bv->bv_len & (blksize - 1))
/* Eckd can only do full blocks. */
return ERR_PTR(-EINVAL);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
count += bv->bv_len >> (block->s2b_shift + 9);
#if defined(CONFIG_64BIT)
if (idal_is_needed (page_address(bv->bv_page), bv->bv_len))
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cidaw += bv->bv_len >> (block->s2b_shift + 9);
#endif
}
/* Paranoia. */
if (count != last_rec - first_rec + 1)
return ERR_PTR(-EINVAL);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* use the prefix command if available */
use_prefix = private->features.feature[8] & 0x01;
if (use_prefix) {
/* 1x prefix + number of blocks */
cplength = 2 + count;
/* 1x prefix + cidaws*sizeof(long) */
datasize = sizeof(struct PFX_eckd_data) +
sizeof(struct LO_eckd_data) +
cidaw * sizeof(unsigned long);
} else {
/* 1x define extent + 1x locate record + number of blocks */
cplength = 2 + count;
/* 1x define extent + 1x locate record + cidaws*sizeof(long) */
datasize = sizeof(struct DE_eckd_data) +
sizeof(struct LO_eckd_data) +
cidaw * sizeof(unsigned long);
}
/* Find out the number of additional locate record ccws for cdl. */
if (private->uses_cdl && first_rec < 2*blk_per_trk) {
if (last_rec >= 2*blk_per_trk)
count = 2*blk_per_trk - first_rec;
cplength += count;
datasize += count*sizeof(struct LO_eckd_data);
}
/* Allocate the ccw request. */
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cplength, datasize, startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* First ccw is define extent or prefix. */
if (use_prefix) {
if (prefix(ccw++, cqr->data, first_trk,
last_trk, cmd, basedev, startdev) == -EAGAIN) {
/* Clock not in sync and XRC is enabled.
* Try again later.
*/
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-EAGAIN);
}
idaws = (unsigned long *) (cqr->data +
sizeof(struct PFX_eckd_data));
} else {
if (define_extent(ccw++, cqr->data, first_trk,
last_trk, cmd, startdev) == -EAGAIN) {
/* Clock not in sync and XRC is enabled.
* Try again later.
*/
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-EAGAIN);
}
idaws = (unsigned long *) (cqr->data +
sizeof(struct DE_eckd_data));
}
/* Build locate_record+read/write/ccws. */
LO_data = (struct LO_eckd_data *) (idaws + cidaw);
recid = first_rec;
if (private->uses_cdl == 0 || recid > 2*blk_per_trk) {
/* Only standard blocks so there is just one locate record. */
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++, first_trk, first_offs + 1,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
last_rec - recid + 1, cmd, basedev, blksize);
}
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
if (dasd_page_cache) {
char *copy = kmem_cache_alloc(dasd_page_cache,
GFP_DMA | __GFP_NOWARN);
if (copy && rq_data_dir(req) == WRITE)
memcpy(copy + bv->bv_offset, dst, bv->bv_len);
if (copy)
dst = copy + bv->bv_offset;
}
for (off = 0; off < bv->bv_len; off += blksize) {
sector_t trkid = recid;
unsigned int recoffs = sector_div(trkid, blk_per_trk);
rcmd = cmd;
count = blksize;
/* Locate record for cdl special block ? */
if (private->uses_cdl && recid < 2*blk_per_trk) {
if (dasd_eckd_cdl_special(blk_per_trk, recid)){
rcmd |= 0x8;
count = dasd_eckd_cdl_reclen(recid);
if (count < blksize &&
rq_data_dir(req) == READ)
memset(dst + count, 0xe5,
blksize - count);
}
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++,
trkid, recoffs + 1,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
1, rcmd, basedev, count);
}
/* Locate record for standard blocks ? */
if (private->uses_cdl && recid == 2*blk_per_trk) {
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++,
trkid, recoffs + 1,
last_rec - recid + 1,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cmd, basedev, count);
}
/* Read/write ccw. */
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = rcmd;
ccw->count = count;
if (idal_is_needed(dst, blksize)) {
ccw->cda = (__u32)(addr_t) idaws;
ccw->flags = CCW_FLAG_IDA;
idaws = idal_create_words(idaws, dst, blksize);
} else {
ccw->cda = (__u32)(addr_t) dst;
ccw->flags = 0;
}
ccw++;
dst += blksize;
recid++;
}
}
if (blk_noretry_request(req) ||
block->base->features & DASD_FEATURE_FAILFAST)
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
cqr->expires = 5 * 60 * HZ; /* 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track(
struct dasd_device *startdev,
struct dasd_block *block,
struct request *req,
sector_t first_rec,
sector_t last_rec,
sector_t first_trk,
sector_t last_trk,
unsigned int first_offs,
unsigned int last_offs,
unsigned int blk_per_trk,
unsigned int blksize)
{
struct dasd_eckd_private *private;
unsigned long *idaws;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
struct req_iterator iter;
struct bio_vec *bv;
char *dst, *idaw_dst;
unsigned int cidaw, cplength, datasize;
unsigned int tlf;
sector_t recid;
unsigned char cmd;
struct dasd_device *basedev;
unsigned int trkcount, count, count_to_trk_end;
unsigned int idaw_len, seg_len, part_len, len_to_track_end;
unsigned char new_track, end_idaw;
sector_t trkid;
unsigned int recoffs;
basedev = block->base;
private = (struct dasd_eckd_private *) basedev->private;
if (rq_data_dir(req) == READ)
cmd = DASD_ECKD_CCW_READ_TRACK_DATA;
else if (rq_data_dir(req) == WRITE)
cmd = DASD_ECKD_CCW_WRITE_TRACK_DATA;
else
return ERR_PTR(-EINVAL);
/* Track based I/O needs IDAWs for each page, and not just for
* 64 bit addresses. We need additional idals for pages
* that get filled from two tracks, so we use the number
* of records as upper limit.
*/
cidaw = last_rec - first_rec + 1;
trkcount = last_trk - first_trk + 1;
/* 1x prefix + one read/write ccw per track */
cplength = 1 + trkcount;
/* on 31-bit we need space for two 32 bit addresses per page
* on 64-bit one 64 bit address
*/
datasize = sizeof(struct PFX_eckd_data) +
cidaw * sizeof(unsigned long long);
/* Allocate the ccw request. */
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
cplength, datasize, startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
/* transfer length factor: how many bytes to read from the last track */
if (first_trk == last_trk)
tlf = last_offs - first_offs + 1;
else
tlf = last_offs + 1;
tlf *= blksize;
if (prefix_LRE(ccw++, cqr->data, first_trk,
last_trk, cmd, basedev, startdev,
1 /* format */, first_offs + 1,
trkcount, blksize,
tlf) == -EAGAIN) {
/* Clock not in sync and XRC is enabled.
* Try again later.
*/
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-EAGAIN);
}
/*
* The translation of request into ccw programs must meet the
* following conditions:
* - all idaws but the first and the last must address full pages
* (or 2K blocks on 31-bit)
* - the scope of a ccw and it's idal ends with the track boundaries
*/
idaws = (unsigned long *) (cqr->data + sizeof(struct PFX_eckd_data));
recid = first_rec;
new_track = 1;
end_idaw = 0;
len_to_track_end = 0;
idaw_dst = 0;
idaw_len = 0;
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
seg_len = bv->bv_len;
while (seg_len) {
if (new_track) {
trkid = recid;
recoffs = sector_div(trkid, blk_per_trk);
count_to_trk_end = blk_per_trk - recoffs;
count = min((last_rec - recid + 1),
(sector_t)count_to_trk_end);
len_to_track_end = count * blksize;
ccw[-1].flags |= CCW_FLAG_CC;
ccw->cmd_code = cmd;
ccw->count = len_to_track_end;
ccw->cda = (__u32)(addr_t)idaws;
ccw->flags = CCW_FLAG_IDA;
ccw++;
recid += count;
new_track = 0;
}
/* If we start a new idaw, everything is fine and the
* start of the new idaw is the start of this segment.
* If we continue an idaw, we must make sure that the
* current segment begins where the so far accumulated
* idaw ends
*/
if (!idaw_dst)
idaw_dst = dst;
if ((idaw_dst + idaw_len) != dst) {
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-ERANGE);
}
part_len = min(seg_len, len_to_track_end);
seg_len -= part_len;
dst += part_len;
idaw_len += part_len;
len_to_track_end -= part_len;
/* collected memory area ends on an IDA_BLOCK border,
* -> create an idaw
* idal_create_words will handle cases where idaw_len
* is larger then IDA_BLOCK_SIZE
*/
if (!(__pa(idaw_dst + idaw_len) & (IDA_BLOCK_SIZE-1)))
end_idaw = 1;
/* We also need to end the idaw at track end */
if (!len_to_track_end) {
new_track = 1;
end_idaw = 1;
}
if (end_idaw) {
idaws = idal_create_words(idaws, idaw_dst,
idaw_len);
idaw_dst = 0;
idaw_len = 0;
end_idaw = 0;
}
}
}
if (blk_noretry_request(req) ||
block->base->features & DASD_FEATURE_FAILFAST)
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
cqr->expires = 5 * 60 * HZ; /* 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
static int prepare_itcw(struct itcw *itcw,
unsigned int trk, unsigned int totrk, int cmd,
struct dasd_device *basedev,
struct dasd_device *startdev,
unsigned int rec_on_trk, int count,
unsigned int blksize,
unsigned int total_data_size,
unsigned int tlf,
unsigned int blk_per_trk)
{
struct PFX_eckd_data pfxdata;
struct dasd_eckd_private *basepriv, *startpriv;
struct DE_eckd_data *dedata;
struct LRE_eckd_data *lredata;
struct dcw *dcw;
u32 begcyl, endcyl;
u16 heads, beghead, endhead;
u8 pfx_cmd;
int rc = 0;
int sector = 0;
int dn, d;
/* setup prefix data */
basepriv = (struct dasd_eckd_private *) basedev->private;
startpriv = (struct dasd_eckd_private *) startdev->private;
dedata = &pfxdata.define_extent;
lredata = &pfxdata.locate_record;
memset(&pfxdata, 0, sizeof(pfxdata));
pfxdata.format = 1; /* PFX with LRE */
pfxdata.base_address = basepriv->ned->unit_addr;
pfxdata.base_lss = basepriv->ned->ID;
pfxdata.validity.define_extent = 1;
/* private uid is kept up to date, conf_data may be outdated */
if (startpriv->uid.type != UA_BASE_DEVICE) {
pfxdata.validity.verify_base = 1;
if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
pfxdata.validity.hyper_pav = 1;
}
switch (cmd) {
case DASD_ECKD_CCW_READ_TRACK_DATA:
dedata->mask.perm = 0x1;
dedata->attributes.operation = basepriv->attrib.operation;
dedata->blk_size = blksize;
dedata->ga_extended |= 0x42;
lredata->operation.orientation = 0x0;
lredata->operation.operation = 0x0C;
lredata->auxiliary.check_bytes = 0x01;
pfx_cmd = DASD_ECKD_CCW_PFX_READ;
break;
case DASD_ECKD_CCW_WRITE_TRACK_DATA:
dedata->mask.perm = 0x02;
dedata->attributes.operation = basepriv->attrib.operation;
dedata->blk_size = blksize;
rc = check_XRC_on_prefix(&pfxdata, basedev);
dedata->ga_extended |= 0x42;
lredata->operation.orientation = 0x0;
lredata->operation.operation = 0x3F;
lredata->extended_operation = 0x23;
lredata->auxiliary.check_bytes = 0x2;
pfx_cmd = DASD_ECKD_CCW_PFX;
break;
default:
DBF_DEV_EVENT(DBF_ERR, basedev,
"prepare itcw, unknown opcode 0x%x", cmd);
BUG();
break;
}
if (rc)
return rc;
dedata->attributes.mode = 0x3; /* ECKD */
heads = basepriv->rdc_data.trk_per_cyl;
begcyl = trk / heads;
beghead = trk % heads;
endcyl = totrk / heads;
endhead = totrk % heads;
/* check for sequential prestage - enhance cylinder range */
if (dedata->attributes.operation == DASD_SEQ_PRESTAGE ||
dedata->attributes.operation == DASD_SEQ_ACCESS) {
if (endcyl + basepriv->attrib.nr_cyl < basepriv->real_cyl)
endcyl += basepriv->attrib.nr_cyl;
else
endcyl = (basepriv->real_cyl - 1);
}
set_ch_t(&dedata->beg_ext, begcyl, beghead);
set_ch_t(&dedata->end_ext, endcyl, endhead);
dedata->ep_format = 0x20; /* records per track is valid */
dedata->ep_rec_per_track = blk_per_trk;
if (rec_on_trk) {
switch (basepriv->rdc_data.dev_type) {
case 0x3390:
dn = ceil_quot(blksize + 6, 232);
d = 9 + ceil_quot(blksize + 6 * (dn + 1), 34);
sector = (49 + (rec_on_trk - 1) * (10 + d)) / 8;
break;
case 0x3380:
d = 7 + ceil_quot(blksize + 12, 32);
sector = (39 + (rec_on_trk - 1) * (8 + d)) / 7;
break;
}
}
lredata->auxiliary.length_valid = 1;
lredata->auxiliary.length_scope = 1;
lredata->auxiliary.imbedded_ccw_valid = 1;
lredata->length = tlf;
lredata->imbedded_ccw = cmd;
lredata->count = count;
lredata->sector = sector;
set_ch_t(&lredata->seek_addr, begcyl, beghead);
lredata->search_arg.cyl = lredata->seek_addr.cyl;
lredata->search_arg.head = lredata->seek_addr.head;
lredata->search_arg.record = rec_on_trk;
dcw = itcw_add_dcw(itcw, pfx_cmd, 0,
&pfxdata, sizeof(pfxdata), total_data_size);
return rc;
}
static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
struct dasd_device *startdev,
struct dasd_block *block,
struct request *req,
sector_t first_rec,
sector_t last_rec,
sector_t first_trk,
sector_t last_trk,
unsigned int first_offs,
unsigned int last_offs,
unsigned int blk_per_trk,
unsigned int blksize)
{
struct dasd_eckd_private *private;
struct dasd_ccw_req *cqr;
struct req_iterator iter;
struct bio_vec *bv;
char *dst;
unsigned int trkcount, ctidaw;
unsigned char cmd;
struct dasd_device *basedev;
unsigned int tlf;
struct itcw *itcw;
struct tidaw *last_tidaw = NULL;
int itcw_op;
size_t itcw_size;
basedev = block->base;
private = (struct dasd_eckd_private *) basedev->private;
if (rq_data_dir(req) == READ) {
cmd = DASD_ECKD_CCW_READ_TRACK_DATA;
itcw_op = ITCW_OP_READ;
} else if (rq_data_dir(req) == WRITE) {
cmd = DASD_ECKD_CCW_WRITE_TRACK_DATA;
itcw_op = ITCW_OP_WRITE;
} else
return ERR_PTR(-EINVAL);
/* trackbased I/O needs address all memory via TIDAWs,
* not just for 64 bit addresses. This allows us to map
* each segment directly to one tidaw.
*/
trkcount = last_trk - first_trk + 1;
ctidaw = 0;
rq_for_each_segment(bv, req, iter) {
++ctidaw;
}
/* Allocate the ccw request. */
itcw_size = itcw_calc_size(0, ctidaw, 0);
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
0, itcw_size, startdev);
if (IS_ERR(cqr))
return cqr;
cqr->cpmode = 1;
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
cqr->expires = 100*HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
cqr->retries = 10;
/* transfer length factor: how many bytes to read from the last track */
if (first_trk == last_trk)
tlf = last_offs - first_offs + 1;
else
tlf = last_offs + 1;
tlf *= blksize;
itcw = itcw_init(cqr->data, itcw_size, itcw_op, 0, ctidaw, 0);
cqr->cpaddr = itcw_get_tcw(itcw);
if (prepare_itcw(itcw, first_trk, last_trk,
cmd, basedev, startdev,
first_offs + 1,
trkcount, blksize,
(last_rec - first_rec + 1) * blksize,
tlf, blk_per_trk) == -EAGAIN) {
/* Clock not in sync and XRC is enabled.
* Try again later.
*/
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-EAGAIN);
}
/*
* A tidaw can address 4k of memory, but must not cross page boundaries
* We can let the block layer handle this by setting
* blk_queue_segment_boundary to page boundaries and
* blk_max_segment_size to page size when setting up the request queue.
*/
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
last_tidaw = itcw_add_tidaw(itcw, 0x00, dst, bv->bv_len);
if (IS_ERR(last_tidaw))
return (struct dasd_ccw_req *)last_tidaw;
}
last_tidaw->flags |= 0x80;
itcw_finalize(itcw);
if (blk_noretry_request(req) ||
block->base->features & DASD_FEATURE_FAILFAST)
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
cqr->startdev = startdev;
cqr->memdev = startdev;
cqr->block = block;
cqr->expires = 5 * 60 * HZ; /* 5 minutes */
cqr->lpm = private->path_data.ppm;
cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
struct dasd_block *block,
struct request *req)
{
int tpm, cmdrtd, cmdwtd;
int use_prefix;
struct dasd_eckd_private *private;
int fcx_in_css, fcx_in_gneq, fcx_in_features;
struct dasd_device *basedev;
sector_t first_rec, last_rec;
sector_t first_trk, last_trk;
unsigned int first_offs, last_offs;
unsigned int blk_per_trk, blksize;
int cdlspecial;
struct dasd_ccw_req *cqr;
basedev = block->base;
private = (struct dasd_eckd_private *) basedev->private;
/* Calculate number of blocks/records per track. */
blksize = block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
/* Calculate record id of first and last block. */
first_rec = first_trk = req->sector >> block->s2b_shift;
first_offs = sector_div(first_trk, blk_per_trk);
last_rec = last_trk =
(req->sector + req->nr_sectors - 1) >> block->s2b_shift;
last_offs = sector_div(last_trk, blk_per_trk);
cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
/* is transport mode supported ? */
fcx_in_css = css_general_characteristics.fcx;
fcx_in_gneq = private->gneq->reserved2[7] & 0x04;
fcx_in_features = private->features.feature[40] & 0x80;
tpm = fcx_in_css && fcx_in_gneq && fcx_in_features;
/* is read track data and write track data in command mode supported? */
cmdrtd = private->features.feature[9] & 0x20;
cmdwtd = private->features.feature[12] & 0x40;
use_prefix = private->features.feature[8] & 0x01;
cqr = NULL;
if (cdlspecial || dasd_page_cache) {
/* do nothing, just fall through to the cmd mode single case */
} else if (!dasd_nofcx && tpm && (first_trk == last_trk)) {
cqr = dasd_eckd_build_cp_tpm_track(startdev, block, req,
first_rec, last_rec,
first_trk, last_trk,
first_offs, last_offs,
blk_per_trk, blksize);
if (IS_ERR(cqr) && PTR_ERR(cqr) != -EAGAIN)
cqr = NULL;
} else if (use_prefix &&
(((rq_data_dir(req) == READ) && cmdrtd) ||
((rq_data_dir(req) == WRITE) && cmdwtd))) {
cqr = dasd_eckd_build_cp_cmd_track(startdev, block, req,
first_rec, last_rec,
first_trk, last_trk,
first_offs, last_offs,
blk_per_trk, blksize);
if (IS_ERR(cqr) && PTR_ERR(cqr) != -EAGAIN)
cqr = NULL;
}
if (!cqr)
cqr = dasd_eckd_build_cp_cmd_single(startdev, block, req,
first_rec, last_rec,
first_trk, last_trk,
first_offs, last_offs,
blk_per_trk, blksize);
return cqr;
}
static int
dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req)
{
struct dasd_eckd_private *private;
struct ccw1 *ccw;
struct req_iterator iter;
struct bio_vec *bv;
char *dst, *cda;
unsigned int blksize, blk_per_trk, off;
sector_t recid;
int status;
if (!dasd_page_cache)
goto out;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
private = (struct dasd_eckd_private *) cqr->block->base->private;
blksize = cqr->block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
recid = req->sector >> cqr->block->s2b_shift;
ccw = cqr->cpaddr;
/* Skip over define extent & locate record. */
ccw++;
if (private->uses_cdl == 0 || recid > 2*blk_per_trk)
ccw++;
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
for (off = 0; off < bv->bv_len; off += blksize) {
/* Skip locate record. */
if (private->uses_cdl && recid <= 2*blk_per_trk)
ccw++;
if (dst) {
if (ccw->flags & CCW_FLAG_IDA)
cda = *((char **)((addr_t) ccw->cda));
else
cda = (char *)((addr_t) ccw->cda);
if (dst != cda) {
if (rq_data_dir(req) == READ)
memcpy(dst, cda, bv->bv_len);
kmem_cache_free(dasd_page_cache,
(void *)((addr_t)cda & PAGE_MASK));
}
dst = NULL;
}
ccw++;
recid++;
}
}
out:
status = cqr->status == DASD_CQR_DONE;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
return status;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/*
* Modify ccw/tcw in cqr so it can be started on a base device.
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
*
* Note that this is not enough to restart the cqr!
* Either reset cqr->startdev as well (summary unit check handling)
* or restart via separate cqr (as in ERP handling).
*/
void dasd_eckd_reset_ccw_to_base_io(struct dasd_ccw_req *cqr)
{
struct ccw1 *ccw;
struct PFX_eckd_data *pfxdata;
struct tcw *tcw;
struct tccb *tccb;
struct dcw *dcw;
if (cqr->cpmode == 1) {
tcw = cqr->cpaddr;
tccb = tcw_get_tccb(tcw);
dcw = (struct dcw *)&tccb->tca[0];
pfxdata = (struct PFX_eckd_data *)&dcw->cd[0];
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
pfxdata->validity.verify_base = 0;
pfxdata->validity.hyper_pav = 0;
} else {
ccw = cqr->cpaddr;
pfxdata = cqr->data;
if (ccw->cmd_code == DASD_ECKD_CCW_PFX) {
pfxdata->validity.verify_base = 0;
pfxdata->validity.hyper_pav = 0;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
}
}
#define DASD_ECKD_CHANQ_MAX_SIZE 4
static struct dasd_ccw_req *dasd_eckd_build_alias_cp(struct dasd_device *base,
struct dasd_block *block,
struct request *req)
{
struct dasd_eckd_private *private;
struct dasd_device *startdev;
unsigned long flags;
struct dasd_ccw_req *cqr;
startdev = dasd_alias_get_start_dev(base);
if (!startdev)
startdev = base;
private = (struct dasd_eckd_private *) startdev->private;
if (private->count >= DASD_ECKD_CHANQ_MAX_SIZE)
return ERR_PTR(-EBUSY);
spin_lock_irqsave(get_ccwdev_lock(startdev->cdev), flags);
private->count++;
cqr = dasd_eckd_build_cp(startdev, block, req);
if (IS_ERR(cqr))
private->count--;
spin_unlock_irqrestore(get_ccwdev_lock(startdev->cdev), flags);
return cqr;
}
static int dasd_eckd_free_alias_cp(struct dasd_ccw_req *cqr,
struct request *req)
{
struct dasd_eckd_private *private;
unsigned long flags;
spin_lock_irqsave(get_ccwdev_lock(cqr->memdev->cdev), flags);
private = (struct dasd_eckd_private *) cqr->memdev->private;
private->count--;
spin_unlock_irqrestore(get_ccwdev_lock(cqr->memdev->cdev), flags);
return dasd_eckd_free_cp(cqr, req);
}
static int
dasd_eckd_fill_info(struct dasd_device * device,
struct dasd_information2_t * info)
{
struct dasd_eckd_private *private;
private = (struct dasd_eckd_private *) device->private;
info->label_block = 2;
info->FBA_layout = private->uses_cdl ? 0 : 1;
info->format = private->uses_cdl ? DASD_FORMAT_CDL : DASD_FORMAT_LDL;
info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
memcpy(info->characteristics, &private->rdc_data,
sizeof(struct dasd_eckd_characteristics));
info->confdata_size = min((unsigned long)private->conf_len,
sizeof(info->configuration_data));
memcpy(info->configuration_data, private->conf_data,
info->confdata_size);
return 0;
}
/*
* SECTION: ioctl functions for eckd devices.
*/
/*
* Release device ioctl.
* Buils a channel programm to releases a prior reserved
* (see dasd_eckd_reserve) device.
*/
static int
dasd_eckd_release(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
return PTR_ERR(cqr);
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RELEASE;
ccw->flags |= CCW_FLAG_SLI;
ccw->count = 32;
ccw->cda = (__u32)(addr_t) cqr->data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = device;
cqr->memdev = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
rc = dasd_sleep_on_immediatly(cqr);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Reserve device ioctl.
* Options are set to 'synchronous wait for interrupt' and
* 'timeout the request'. This leads to a terminate IO if
* the interrupt is outstanding for a certain time.
*/
static int
dasd_eckd_reserve(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
return PTR_ERR(cqr);
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_RESERVE;
ccw->flags |= CCW_FLAG_SLI;
ccw->count = 32;
ccw->cda = (__u32)(addr_t) cqr->data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = device;
cqr->memdev = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
rc = dasd_sleep_on_immediatly(cqr);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Steal lock ioctl - unconditional reserve device.
* Buils a channel programm to break a device's reservation.
* (unconditional reserve)
*/
static int
dasd_eckd_steal_lock(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
int rc;
struct ccw1 *ccw;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
return PTR_ERR(cqr);
}
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_SLCK;
ccw->flags |= CCW_FLAG_SLI;
ccw->count = 32;
ccw->cda = (__u32)(addr_t) cqr->data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = device;
cqr->memdev = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
rc = dasd_sleep_on_immediatly(cqr);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Read performance statistics
*/
static int
dasd_eckd_performance(struct dasd_device *device, void __user *argp)
{
struct dasd_psf_prssd_data *prssdp;
struct dasd_rssd_perf_stats_t *stats;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
int rc;
cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
1 /* PSF */ + 1 /* RSSD */ ,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_perf_stats_t)),
device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
return PTR_ERR(cqr);
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
cqr->startdev = device;
cqr->memdev = device;
cqr->retries = 0;
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
prssdp = (struct dasd_psf_prssd_data *) cqr->data;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data));
prssdp->order = PSF_ORDER_PRSSD;
prssdp->suborder = 0x01; /* Performance Statistics */
prssdp->varies[1] = 0x01; /* Perf Statistics for the Subsystem */
ccw = cqr->cpaddr;
ccw->cmd_code = DASD_ECKD_CCW_PSF;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
ccw->count = sizeof(struct dasd_psf_prssd_data);
ccw->flags |= CCW_FLAG_CC;
ccw->cda = (__u32)(addr_t) prssdp;
/* Read Subsystem Data - Performance Statistics */
stats = (struct dasd_rssd_perf_stats_t *) (prssdp + 1);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
memset(stats, 0, sizeof(struct dasd_rssd_perf_stats_t));
ccw++;
ccw->cmd_code = DASD_ECKD_CCW_RSSD;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
ccw->count = sizeof(struct dasd_rssd_perf_stats_t);
ccw->cda = (__u32)(addr_t) stats;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
rc = dasd_sleep_on(cqr);
if (rc == 0) {
prssdp = (struct dasd_psf_prssd_data *) cqr->data;
stats = (struct dasd_rssd_perf_stats_t *) (prssdp + 1);
if (copy_to_user(argp, stats,
sizeof(struct dasd_rssd_perf_stats_t)))
rc = -EFAULT;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_sfree_request(cqr, cqr->memdev);
return rc;
}
/*
* Get attributes (cache operations)
* Returnes the cache attributes used in Define Extend (DE).
*/
static int
dasd_eckd_get_attrib(struct dasd_device *device, void __user *argp)
{
struct dasd_eckd_private *private =
(struct dasd_eckd_private *)device->private;
struct attrib_data_t attrib = private->attrib;
int rc;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (!argp)
return -EINVAL;
rc = 0;
if (copy_to_user(argp, (long *) &attrib,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
sizeof(struct attrib_data_t)))
rc = -EFAULT;
return rc;
}
/*
* Set attributes (cache operations)
* Stores the attributes for cache operation to be used in Define Extend (DE).
*/
static int
dasd_eckd_set_attrib(struct dasd_device *device, void __user *argp)
{
struct dasd_eckd_private *private =
(struct dasd_eckd_private *)device->private;
struct attrib_data_t attrib;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (!argp)
return -EINVAL;
if (copy_from_user(&attrib, argp, sizeof(struct attrib_data_t)))
return -EFAULT;
private->attrib = attrib;
dev_info(&device->cdev->dev,
"The DASD cache mode was set to %x (%i cylinder prestage)\n",
private->attrib.operation, private->attrib.nr_cyl);
return 0;
}
/*
* Issue syscall I/O to EMC Symmetrix array.
* CCWs are PSF and RSSD
*/
static int dasd_symm_io(struct dasd_device *device, void __user *argp)
{
struct dasd_symmio_parms usrparm;
char *psf_data, *rssd_result;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
int rc;
/* Copy parms from caller */
rc = -EFAULT;
if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
goto out;
#ifndef CONFIG_64BIT
/* Make sure pointers are sane even on 31 bit. */
if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
rc = -EINVAL;
goto out;
}
#endif
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
if (!psf_data || !rssd_result) {
rc = -ENOMEM;
goto out_free;
}
/* get syscall header from user space */
rc = -EFAULT;
if (copy_from_user(psf_data,
(void __user *)(unsigned long) usrparm.psf_data,
usrparm.psf_data_len))
goto out_free;
/* sanity check on syscall header */
if (psf_data[0] != 0x17 && psf_data[1] != 0xce) {
rc = -EINVAL;
goto out_free;
}
/* setup CCWs for PSF + RSSD */
cqr = dasd_smalloc_request("ECKD", 2 , 0, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
rc = PTR_ERR(cqr);
goto out_free;
}
cqr->startdev = device;
cqr->memdev = device;
cqr->retries = 3;
cqr->expires = 10 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
/* Build the ccws */
ccw = cqr->cpaddr;
/* PSF ccw */
ccw->cmd_code = DASD_ECKD_CCW_PSF;
ccw->count = usrparm.psf_data_len;
ccw->flags |= CCW_FLAG_CC;
ccw->cda = (__u32)(addr_t) psf_data;
ccw++;
/* RSSD ccw */
ccw->cmd_code = DASD_ECKD_CCW_RSSD;
ccw->count = usrparm.rssd_result_len;
ccw->flags = CCW_FLAG_SLI ;
ccw->cda = (__u32)(addr_t) rssd_result;
rc = dasd_sleep_on(cqr);
if (rc)
goto out_sfree;
rc = -EFAULT;
if (copy_to_user((void __user *)(unsigned long) usrparm.rssd_result,
rssd_result, usrparm.rssd_result_len))
goto out_sfree;
rc = 0;
out_sfree:
dasd_sfree_request(cqr, cqr->memdev);
out_free:
kfree(rssd_result);
kfree(psf_data);
out:
DBF_DEV_EVENT(DBF_WARNING, device, "Symmetrix ioctl: rc=%d", rc);
return rc;
}
static int
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_device *device = block->base;
switch (cmd) {
case BIODASDGATTR:
return dasd_eckd_get_attrib(device, argp);
case BIODASDSATTR:
return dasd_eckd_set_attrib(device, argp);
case BIODASDPSRD:
return dasd_eckd_performance(device, argp);
case BIODASDRLSE:
return dasd_eckd_release(device);
case BIODASDRSRV:
return dasd_eckd_reserve(device);
case BIODASDSLCK:
return dasd_eckd_steal_lock(device);
case BIODASDSYMMIO:
return dasd_symm_io(device, argp);
default:
return -ENOIOCTLCMD;
}
}
/*
* Dump the range of CCWs into 'page' buffer
* and return number of printed chars.
*/
static int
dasd_eckd_dump_ccw_range(struct ccw1 *from, struct ccw1 *to, char *page)
{
int len, count;
char *datap;
len = 0;
while (from <= to) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" CCW %p: %08X %08X DAT:",
from, ((int *) from)[0], ((int *) from)[1]);
/* get pointer to data (consider IDALs) */
if (from->flags & CCW_FLAG_IDA)
datap = (char *) *((addr_t *) (addr_t) from->cda);
else
datap = (char *) ((addr_t) from->cda);
/* dump data (max 32 bytes) */
for (count = 0; count < from->count && count < 32; count++) {
if (count % 8 == 0) len += sprintf(page + len, " ");
if (count % 4 == 0) len += sprintf(page + len, " ");
len += sprintf(page + len, "%02x", datap[count]);
}
len += sprintf(page + len, "\n");
from++;
}
return len;
}
static void
dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
struct irb *irb, char *reason)
{
u64 *sense;
int sl;
struct tsb *tsb;
sense = NULL;
tsb = NULL;
if (req && scsw_is_tm(&req->irb.scsw)) {
if (irb->scsw.tm.tcw)
tsb = tcw_get_tsb(
(struct tcw *)(unsigned long)irb->scsw.tm.tcw);
if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
switch (tsb->flags & 0x07) {
case 1: /* tsa_iostat */
sense = (u64 *)tsb->tsa.iostat.sense;
break;
case 2: /* ts_ddpc */
sense = (u64 *)tsb->tsa.ddpc.sense;
break;
case 3: /* tsa_intrg */
break;
}
}
} else {
if (irb->esw.esw0.erw.cons)
sense = (u64 *)irb->ecw;
}
if (sense) {
for (sl = 0; sl < 4; sl++) {
DBF_DEV_EVENT(DBF_EMERG, device,
"%s: %016llx %016llx %016llx %016llx",
reason, sense[0], sense[1], sense[2],
sense[3]);
}
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
}
}
/*
* Print sense data and related channel program.
* Parts are printed because printk buffer is only 1024 bytes.
*/
static void dasd_eckd_dump_sense_ccw(struct dasd_device *device,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
struct dasd_ccw_req *req, struct irb *irb)
{
char *page;
struct ccw1 *first, *last, *fail, *from, *to;
int len, sl, sct;
page = (char *) get_zeroed_page(GFP_ATOMIC);
if (page == NULL) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"No memory to dump sense data\n");
return;
}
/* dump the sense data */
len = sprintf(page, KERN_ERR PRINTK_HEADER
" I/O status report for device %s:\n",
dev_name(&device->cdev->dev));
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" in req: %p CS: 0x%02X DS: 0x%02X\n", req,
scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw));
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" device %s: Failing CCW: %p\n",
dev_name(&device->cdev->dev),
(void *) (addr_t) irb->scsw.cmd.cpa);
if (irb->esw.esw0.erw.cons) {
for (sl = 0; sl < 4; sl++) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" Sense(hex) %2d-%2d:",
(8 * sl), ((8 * sl) + 7));
for (sct = 0; sct < 8; sct++) {
len += sprintf(page + len, " %02x",
irb->ecw[8 * sl + sct]);
}
len += sprintf(page + len, "\n");
}
if (irb->ecw[27] & DASD_SENSE_BIT_0) {
/* 24 Byte Sense Data */
sprintf(page + len, KERN_ERR PRINTK_HEADER
" 24 Byte: %x MSG %x, "
"%s MSGb to SYSOP\n",
irb->ecw[7] >> 4, irb->ecw[7] & 0x0f,
irb->ecw[1] & 0x10 ? "" : "no");
} else {
/* 32 Byte Sense Data */
sprintf(page + len, KERN_ERR PRINTK_HEADER
" 32 Byte: Format: %x "
"Exception class %x\n",
irb->ecw[6] & 0x0f, irb->ecw[22] >> 4);
}
} else {
sprintf(page + len, KERN_ERR PRINTK_HEADER
" SORRY - NO VALID SENSE AVAILABLE\n");
}
printk("%s", page);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (req) {
/* req == NULL for unsolicited interrupts */
/* dump the Channel Program (max 140 Bytes per line) */
/* Count CCW and print first CCWs (maximum 1024 % 140 = 7) */
first = req->cpaddr;
for (last = first; last->flags & (CCW_FLAG_CC | CCW_FLAG_DC); last++);
to = min(first + 6, last);
len = sprintf(page, KERN_ERR PRINTK_HEADER
" Related CP in req: %p\n", req);
dasd_eckd_dump_ccw_range(first, to, page + len);
printk("%s", page);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
/* print failing CCW area (maximum 4) */
/* scsw->cda is either valid or zero */
len = 0;
from = ++to;
fail = (struct ccw1 *)(addr_t)
irb->scsw.cmd.cpa; /* failing CCW */
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
if (from < fail - 2) {
from = fail - 2; /* there is a gap - print header */
len += sprintf(page, KERN_ERR PRINTK_HEADER "......\n");
}
to = min(fail + 1, last);
len += dasd_eckd_dump_ccw_range(from, to, page + len);
/* print last CCWs (maximum 2) */
from = max(from, ++to);
if (from < last - 1) {
from = last - 1; /* there is a gap - print header */
len += sprintf(page + len, KERN_ERR PRINTK_HEADER "......\n");
}
len += dasd_eckd_dump_ccw_range(from, last, page + len);
if (len > 0)
printk("%s", page);
}
free_page((unsigned long) page);
}
/*
* Print sense data from a tcw.
*/
static void dasd_eckd_dump_sense_tcw(struct dasd_device *device,
struct dasd_ccw_req *req, struct irb *irb)
{
char *page;
int len, sl, sct, residual;
struct tsb *tsb;
u8 *sense;
page = (char *) get_zeroed_page(GFP_ATOMIC);
if (page == NULL) {
DBF_DEV_EVENT(DBF_WARNING, device, " %s",
"No memory to dump sense data");
return;
}
/* dump the sense data */
len = sprintf(page, KERN_ERR PRINTK_HEADER
" I/O status report for device %s:\n",
dev_name(&device->cdev->dev));
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" in req: %p CS: 0x%02X DS: 0x%02X "
"fcxs: 0x%02X schxs: 0x%02X\n", req,
scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
irb->scsw.tm.fcxs, irb->scsw.tm.schxs);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" device %s: Failing TCW: %p\n",
dev_name(&device->cdev->dev),
(void *) (addr_t) irb->scsw.tm.tcw);
tsb = NULL;
sense = NULL;
if (irb->scsw.tm.tcw)
tsb = tcw_get_tsb(
(struct tcw *)(unsigned long)irb->scsw.tm.tcw);
if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->length %d\n", tsb->length);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->flags %x\n", tsb->flags);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->dcw_offset %d\n", tsb->dcw_offset);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->count %d\n", tsb->count);
residual = tsb->count - 28;
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" residual %d\n", residual);
switch (tsb->flags & 0x07) {
case 1: /* tsa_iostat */
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.iostat.dev_time %d\n",
tsb->tsa.iostat.dev_time);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.iostat.def_time %d\n",
tsb->tsa.iostat.def_time);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.iostat.queue_time %d\n",
tsb->tsa.iostat.queue_time);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.iostat.dev_busy_time %d\n",
tsb->tsa.iostat.dev_busy_time);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.iostat.dev_act_time %d\n",
tsb->tsa.iostat.dev_act_time);
sense = tsb->tsa.iostat.sense;
break;
case 2: /* ts_ddpc */
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.ddpc.rc %d\n", tsb->tsa.ddpc.rc);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.ddpc.rcq: ");
for (sl = 0; sl < 16; sl++) {
for (sct = 0; sct < 8; sct++) {
len += sprintf(page + len, " %02x",
tsb->tsa.ddpc.rcq[sl]);
}
len += sprintf(page + len, "\n");
}
sense = tsb->tsa.ddpc.sense;
break;
case 3: /* tsa_intrg */
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->tsa.intrg.: not supportet yet \n");
break;
}
if (sense) {
for (sl = 0; sl < 4; sl++) {
len += sprintf(page + len,
KERN_ERR PRINTK_HEADER
" Sense(hex) %2d-%2d:",
(8 * sl), ((8 * sl) + 7));
for (sct = 0; sct < 8; sct++) {
len += sprintf(page + len, " %02x",
sense[8 * sl + sct]);
}
len += sprintf(page + len, "\n");
}
if (sense[27] & DASD_SENSE_BIT_0) {
/* 24 Byte Sense Data */
sprintf(page + len, KERN_ERR PRINTK_HEADER
" 24 Byte: %x MSG %x, "
"%s MSGb to SYSOP\n",
sense[7] >> 4, sense[7] & 0x0f,
sense[1] & 0x10 ? "" : "no");
} else {
/* 32 Byte Sense Data */
sprintf(page + len, KERN_ERR PRINTK_HEADER
" 32 Byte: Format: %x "
"Exception class %x\n",
sense[6] & 0x0f, sense[22] >> 4);
}
} else {
sprintf(page + len, KERN_ERR PRINTK_HEADER
" SORRY - NO VALID SENSE AVAILABLE\n");
}
} else {
sprintf(page + len, KERN_ERR PRINTK_HEADER
" SORRY - NO TSB DATA AVAILABLE\n");
}
printk("%s", page);
free_page((unsigned long) page);
}
static void dasd_eckd_dump_sense(struct dasd_device *device,
struct dasd_ccw_req *req, struct irb *irb)
{
if (req && scsw_is_tm(&req->irb.scsw))
dasd_eckd_dump_sense_tcw(device, req, irb);
else
dasd_eckd_dump_sense_ccw(device, req, irb);
}
/*
* max_blocks is dependent on the amount of storage that is available
* in the static io buffer for each device. Currently each device has
* 8192 bytes (=2 pages). For 64 bit one dasd_mchunkt_t structure has
* 24 bytes, the struct dasd_ccw_req has 136 bytes and each block can use
* up to 16 bytes (8 for the ccw and 8 for the idal pointer). In
* addition we have one define extent ccw + 16 bytes of data and one
* locate record ccw + 16 bytes of data. That makes:
* (8192 - 24 - 136 - 8 - 16 - 8 - 16) / 16 = 499 blocks at maximum.
* We want to fit two into the available memory so that we can immediately
* start the next request if one finishes off. That makes 249.5 blocks
* for one request. Give a little safety and the result is 240.
*/
static struct dasd_discipline dasd_eckd_discipline = {
.owner = THIS_MODULE,
.name = "ECKD",
.ebcname = "ECKD",
.max_blocks = 240,
.check_device = dasd_eckd_check_characteristics,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
.uncheck_device = dasd_eckd_uncheck_device,
.do_analysis = dasd_eckd_do_analysis,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
.ready_to_online = dasd_eckd_ready_to_online,
.online_to_ready = dasd_eckd_online_to_ready,
.fill_geometry = dasd_eckd_fill_geometry,
.start_IO = dasd_start_IO,
.term_IO = dasd_term_IO,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
.handle_terminated_request = dasd_eckd_handle_terminated_request,
.format_device = dasd_eckd_format_device,
.erp_action = dasd_eckd_erp_action,
.erp_postaction = dasd_eckd_erp_postaction,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 20:11:23 +07:00
.handle_unsolicited_interrupt = dasd_eckd_handle_unsolicited_interrupt,
.build_cp = dasd_eckd_build_alias_cp,
.free_cp = dasd_eckd_free_alias_cp,
.dump_sense = dasd_eckd_dump_sense,
.dump_sense_dbf = dasd_eckd_dump_sense_dbf,
.fill_info = dasd_eckd_fill_info,
.ioctl = dasd_eckd_ioctl,
};
static int __init
dasd_eckd_init(void)
{
ASCEBC(dasd_eckd_discipline.ebcname, 4);
return ccw_driver_register(&dasd_eckd_driver);
}
static void __exit
dasd_eckd_cleanup(void)
{
ccw_driver_unregister(&dasd_eckd_driver);
}
module_init(dasd_eckd_init);
module_exit(dasd_eckd_cleanup);