linux_dsm_epyc7002/fs/locks.c

2833 lines
73 KiB
C
Raw Normal View History

/*
* linux/fs/locks.c
*
* Provide support for fcntl()'s F_GETLK, F_SETLK, and F_SETLKW calls.
* Doug Evans (dje@spiff.uucp), August 07, 1992
*
* Deadlock detection added.
* FIXME: one thing isn't handled yet:
* - mandatory locks (requires lots of changes elsewhere)
* Kelly Carmichael (kelly@[142.24.8.65]), September 17, 1994.
*
* Miscellaneous edits, and a total rewrite of posix_lock_file() code.
* Kai Petzke (wpp@marie.physik.tu-berlin.de), 1994
*
* Converted file_lock_table to a linked list from an array, which eliminates
* the limits on how many active file locks are open.
* Chad Page (pageone@netcom.com), November 27, 1994
*
* Removed dependency on file descriptors. dup()'ed file descriptors now
* get the same locks as the original file descriptors, and a close() on
* any file descriptor removes ALL the locks on the file for the current
* process. Since locks still depend on the process id, locks are inherited
* after an exec() but not after a fork(). This agrees with POSIX, and both
* BSD and SVR4 practice.
* Andy Walker (andy@lysaker.kvaerner.no), February 14, 1995
*
* Scrapped free list which is redundant now that we allocate locks
* dynamically with kmalloc()/kfree().
* Andy Walker (andy@lysaker.kvaerner.no), February 21, 1995
*
* Implemented two lock personalities - FL_FLOCK and FL_POSIX.
*
* FL_POSIX locks are created with calls to fcntl() and lockf() through the
* fcntl() system call. They have the semantics described above.
*
* FL_FLOCK locks are created with calls to flock(), through the flock()
* system call, which is new. Old C libraries implement flock() via fcntl()
* and will continue to use the old, broken implementation.
*
* FL_FLOCK locks follow the 4.4 BSD flock() semantics. They are associated
* with a file pointer (filp). As a result they can be shared by a parent
* process and its children after a fork(). They are removed when the last
* file descriptor referring to the file pointer is closed (unless explicitly
* unlocked).
*
* FL_FLOCK locks never deadlock, an existing lock is always removed before
* upgrading from shared to exclusive (or vice versa). When this happens
* any processes blocked by the current lock are woken up and allowed to
* run before the new lock is applied.
* Andy Walker (andy@lysaker.kvaerner.no), June 09, 1995
*
* Removed some race conditions in flock_lock_file(), marked other possible
* races. Just grep for FIXME to see them.
* Dmitry Gorodchanin (pgmdsg@ibi.com), February 09, 1996.
*
* Addressed Dmitry's concerns. Deadlock checking no longer recursive.
* Lock allocation changed to GFP_ATOMIC as we can't afford to sleep
* once we've checked for blocking and deadlocking.
* Andy Walker (andy@lysaker.kvaerner.no), April 03, 1996.
*
* Initial implementation of mandatory locks. SunOS turned out to be
* a rotten model, so I implemented the "obvious" semantics.
* See 'Documentation/filesystems/mandatory-locking.txt' for details.
* Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996.
*
* Don't allow mandatory locks on mmap()'ed files. Added simple functions to
* check if a file has mandatory locks, used by mmap(), open() and creat() to
* see if system call should be rejected. Ref. HP-UX/SunOS/Solaris Reference
* Manual, Section 2.
* Andy Walker (andy@lysaker.kvaerner.no), April 09, 1996.
*
* Tidied up block list handling. Added '/proc/locks' interface.
* Andy Walker (andy@lysaker.kvaerner.no), April 24, 1996.
*
* Fixed deadlock condition for pathological code that mixes calls to
* flock() and fcntl().
* Andy Walker (andy@lysaker.kvaerner.no), April 29, 1996.
*
* Allow only one type of locking scheme (FL_POSIX or FL_FLOCK) to be in use
* for a given file at a time. Changed the CONFIG_LOCK_MANDATORY scheme to
* guarantee sensible behaviour in the case where file system modules might
* be compiled with different options than the kernel itself.
* Andy Walker (andy@lysaker.kvaerner.no), May 15, 1996.
*
* Added a couple of missing wake_up() calls. Thanks to Thomas Meckel
* (Thomas.Meckel@mni.fh-giessen.de) for spotting this.
* Andy Walker (andy@lysaker.kvaerner.no), May 15, 1996.
*
* Changed FL_POSIX locks to use the block list in the same way as FL_FLOCK
* locks. Changed process synchronisation to avoid dereferencing locks that
* have already been freed.
* Andy Walker (andy@lysaker.kvaerner.no), Sep 21, 1996.
*
* Made the block list a circular list to minimise searching in the list.
* Andy Walker (andy@lysaker.kvaerner.no), Sep 25, 1996.
*
* Made mandatory locking a mount option. Default is not to allow mandatory
* locking.
* Andy Walker (andy@lysaker.kvaerner.no), Oct 04, 1996.
*
* Some adaptations for NFS support.
* Olaf Kirch (okir@monad.swb.de), Dec 1996,
*
* Fixed /proc/locks interface so that we can't overrun the buffer we are handed.
* Andy Walker (andy@lysaker.kvaerner.no), May 12, 1997.
*
* Use slab allocator instead of kmalloc/kfree.
* Use generic list implementation from <linux/list.h>.
* Sped up posix_locks_deadlock by only considering blocked locks.
* Matthew Wilcox <willy@debian.org>, March, 2000.
*
* Leases and LOCK_MAND
* Matthew Wilcox <willy@debian.org>, June, 2000.
* Stephen Rothwell <sfr@canb.auug.org.au>, June, 2000.
*/
#include <linux/capability.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/security.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/time.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
#include <linux/hashtable.h>
#include <linux/percpu.h>
#define CREATE_TRACE_POINTS
#include <trace/events/filelock.h>
#include <asm/uaccess.h>
#define IS_POSIX(fl) (fl->fl_flags & FL_POSIX)
#define IS_FLOCK(fl) (fl->fl_flags & FL_FLOCK)
#define IS_LEASE(fl) (fl->fl_flags & (FL_LEASE|FL_DELEG|FL_LAYOUT))
#define IS_OFDLCK(fl) (fl->fl_flags & FL_OFDLCK)
static inline bool is_remote_lock(struct file *filp)
{
return likely(!(filp->f_path.dentry->d_sb->s_flags & MS_NOREMOTELOCK));
}
static bool lease_breaking(struct file_lock *fl)
{
return fl->fl_flags & (FL_UNLOCK_PENDING | FL_DOWNGRADE_PENDING);
}
static int target_leasetype(struct file_lock *fl)
{
if (fl->fl_flags & FL_UNLOCK_PENDING)
return F_UNLCK;
if (fl->fl_flags & FL_DOWNGRADE_PENDING)
return F_RDLCK;
return fl->fl_type;
}
int leases_enable = 1;
int lease_break_time = 45;
/*
* The global file_lock_list is only used for displaying /proc/locks, so we
* keep a list on each CPU, with each list protected by its own spinlock.
* Global serialization is done using file_rwsem.
*
* Note that alterations to the list also require that the relevant flc_lock is
* held.
*/
struct file_lock_list_struct {
spinlock_t lock;
struct hlist_head hlist;
};
static DEFINE_PER_CPU(struct file_lock_list_struct, file_lock_list);
DEFINE_STATIC_PERCPU_RWSEM(file_rwsem);
/*
* The blocked_hash is used to find POSIX lock loops for deadlock detection.
* It is protected by blocked_lock_lock.
*
* We hash locks by lockowner in order to optimize searching for the lock a
* particular lockowner is waiting on.
*
* FIXME: make this value scale via some heuristic? We generally will want more
* buckets when we have more lockowners holding locks, but that's a little
* difficult to determine without knowing what the workload will look like.
*/
#define BLOCKED_HASH_BITS 7
static DEFINE_HASHTABLE(blocked_hash, BLOCKED_HASH_BITS);
/*
* This lock protects the blocked_hash. Generally, if you're accessing it, you
* want to be holding this lock.
*
* In addition, it also protects the fl->fl_block list, and the fl->fl_next
* pointer for file_lock structures that are acting as lock requests (in
* contrast to those that are acting as records of acquired locks).
*
* Note that when we acquire this lock in order to change the above fields,
* we often hold the flc_lock as well. In certain cases, when reading the fields
* protected by this lock, we can skip acquiring it iff we already hold the
* flc_lock.
*
* In particular, adding an entry to the fl_block list requires that you hold
* both the flc_lock and the blocked_lock_lock (acquired in that order).
* Deleting an entry from the list however only requires the file_lock_lock.
*/
static DEFINE_SPINLOCK(blocked_lock_lock);
static struct kmem_cache *flctx_cache __read_mostly;
static struct kmem_cache *filelock_cache __read_mostly;
static struct file_lock_context *
locks_get_lock_context(struct inode *inode, int type)
{
struct file_lock_context *ctx;
/* paired with cmpxchg() below */
ctx = smp_load_acquire(&inode->i_flctx);
if (likely(ctx) || type == F_UNLCK)
goto out;
ctx = kmem_cache_alloc(flctx_cache, GFP_KERNEL);
if (!ctx)
goto out;
spin_lock_init(&ctx->flc_lock);
INIT_LIST_HEAD(&ctx->flc_flock);
INIT_LIST_HEAD(&ctx->flc_posix);
INIT_LIST_HEAD(&ctx->flc_lease);
/*
* Assign the pointer if it's not already assigned. If it is, then
* free the context we just allocated.
*/
if (cmpxchg(&inode->i_flctx, NULL, ctx)) {
kmem_cache_free(flctx_cache, ctx);
ctx = smp_load_acquire(&inode->i_flctx);
}
out:
trace_locks_get_lock_context(inode, type, ctx);
return ctx;
}
static void
locks_dump_ctx_list(struct list_head *list, char *list_type)
{
struct file_lock *fl;
list_for_each_entry(fl, list, fl_list) {
pr_warn("%s: fl_owner=%p fl_flags=0x%x fl_type=0x%x fl_pid=%u\n", list_type, fl->fl_owner, fl->fl_flags, fl->fl_type, fl->fl_pid);
}
}
static void
locks_check_ctx_lists(struct inode *inode)
{
struct file_lock_context *ctx = inode->i_flctx;
if (unlikely(!list_empty(&ctx->flc_flock) ||
!list_empty(&ctx->flc_posix) ||
!list_empty(&ctx->flc_lease))) {
pr_warn("Leaked locks on dev=0x%x:0x%x ino=0x%lx:\n",
MAJOR(inode->i_sb->s_dev), MINOR(inode->i_sb->s_dev),
inode->i_ino);
locks_dump_ctx_list(&ctx->flc_flock, "FLOCK");
locks_dump_ctx_list(&ctx->flc_posix, "POSIX");
locks_dump_ctx_list(&ctx->flc_lease, "LEASE");
}
}
void
locks_free_lock_context(struct inode *inode)
{
struct file_lock_context *ctx = inode->i_flctx;
if (unlikely(ctx)) {
locks_check_ctx_lists(inode);
kmem_cache_free(flctx_cache, ctx);
}
}
static void locks_init_lock_heads(struct file_lock *fl)
{
INIT_HLIST_NODE(&fl->fl_link);
INIT_LIST_HEAD(&fl->fl_list);
INIT_LIST_HEAD(&fl->fl_block);
init_waitqueue_head(&fl->fl_wait);
}
/* Allocate an empty lock structure. */
struct file_lock *locks_alloc_lock(void)
{
struct file_lock *fl = kmem_cache_zalloc(filelock_cache, GFP_KERNEL);
if (fl)
locks_init_lock_heads(fl);
return fl;
}
EXPORT_SYMBOL_GPL(locks_alloc_lock);
void locks_release_private(struct file_lock *fl)
{
if (fl->fl_ops) {
if (fl->fl_ops->fl_release_private)
fl->fl_ops->fl_release_private(fl);
fl->fl_ops = NULL;
}
if (fl->fl_lmops) {
if (fl->fl_lmops->lm_put_owner) {
fl->fl_lmops->lm_put_owner(fl->fl_owner);
fl->fl_owner = NULL;
}
fl->fl_lmops = NULL;
}
}
EXPORT_SYMBOL_GPL(locks_release_private);
/* Free a lock which is not in use. */
void locks_free_lock(struct file_lock *fl)
{
BUG_ON(waitqueue_active(&fl->fl_wait));
BUG_ON(!list_empty(&fl->fl_list));
BUG_ON(!list_empty(&fl->fl_block));
BUG_ON(!hlist_unhashed(&fl->fl_link));
locks_release_private(fl);
kmem_cache_free(filelock_cache, fl);
}
EXPORT_SYMBOL(locks_free_lock);
static void
locks_dispose_list(struct list_head *dispose)
{
struct file_lock *fl;
while (!list_empty(dispose)) {
fl = list_first_entry(dispose, struct file_lock, fl_list);
list_del_init(&fl->fl_list);
locks_free_lock(fl);
}
}
void locks_init_lock(struct file_lock *fl)
{
memset(fl, 0, sizeof(struct file_lock));
locks_init_lock_heads(fl);
}
EXPORT_SYMBOL(locks_init_lock);
/*
* Initialize a new lock from an existing file_lock structure.
*/
void locks_copy_conflock(struct file_lock *new, struct file_lock *fl)
{
new->fl_owner = fl->fl_owner;
new->fl_pid = fl->fl_pid;
new->fl_file = NULL;
new->fl_flags = fl->fl_flags;
new->fl_type = fl->fl_type;
new->fl_start = fl->fl_start;
new->fl_end = fl->fl_end;
new->fl_lmops = fl->fl_lmops;
new->fl_ops = NULL;
if (fl->fl_lmops) {
if (fl->fl_lmops->lm_get_owner)
fl->fl_lmops->lm_get_owner(fl->fl_owner);
}
}
EXPORT_SYMBOL(locks_copy_conflock);
void locks_copy_lock(struct file_lock *new, struct file_lock *fl)
{
/* "new" must be a freshly-initialized lock */
WARN_ON_ONCE(new->fl_ops);
locks_copy_conflock(new, fl);
new->fl_file = fl->fl_file;
new->fl_ops = fl->fl_ops;
if (fl->fl_ops) {
if (fl->fl_ops->fl_copy_lock)
fl->fl_ops->fl_copy_lock(new, fl);
}
}
EXPORT_SYMBOL(locks_copy_lock);
static inline int flock_translate_cmd(int cmd) {
if (cmd & LOCK_MAND)
return cmd & (LOCK_MAND | LOCK_RW);
switch (cmd) {
case LOCK_SH:
return F_RDLCK;
case LOCK_EX:
return F_WRLCK;
case LOCK_UN:
return F_UNLCK;
}
return -EINVAL;
}
/* Fill in a file_lock structure with an appropriate FLOCK lock. */
static struct file_lock *
flock_make_lock(struct file *filp, unsigned int cmd)
{
struct file_lock *fl;
int type = flock_translate_cmd(cmd);
if (type < 0)
return ERR_PTR(type);
fl = locks_alloc_lock();
if (fl == NULL)
return ERR_PTR(-ENOMEM);
fl->fl_file = filp;
fl->fl_owner = filp;
fl->fl_pid = current->tgid;
fl->fl_flags = FL_FLOCK;
fl->fl_type = type;
fl->fl_end = OFFSET_MAX;
return fl;
}
static int assign_type(struct file_lock *fl, long type)
{
switch (type) {
case F_RDLCK:
case F_WRLCK:
case F_UNLCK:
fl->fl_type = type;
break;
default:
return -EINVAL;
}
return 0;
}
static int flock64_to_posix_lock(struct file *filp, struct file_lock *fl,
struct flock64 *l)
{
switch (l->l_whence) {
case SEEK_SET:
fl->fl_start = 0;
break;
case SEEK_CUR:
fl->fl_start = filp->f_pos;
break;
case SEEK_END:
fl->fl_start = i_size_read(file_inode(filp));
break;
default:
return -EINVAL;
}
if (l->l_start > OFFSET_MAX - fl->fl_start)
return -EOVERFLOW;
fl->fl_start += l->l_start;
if (fl->fl_start < 0)
return -EINVAL;
/* POSIX-1996 leaves the case l->l_len < 0 undefined;
POSIX-2001 defines it. */
if (l->l_len > 0) {
if (l->l_len - 1 > OFFSET_MAX - fl->fl_start)
return -EOVERFLOW;
fl->fl_end = fl->fl_start + l->l_len - 1;
} else if (l->l_len < 0) {
if (fl->fl_start + l->l_len < 0)
return -EINVAL;
fl->fl_end = fl->fl_start - 1;
fl->fl_start += l->l_len;
} else
fl->fl_end = OFFSET_MAX;
fl->fl_owner = current->files;
fl->fl_pid = current->tgid;
fl->fl_file = filp;
fl->fl_flags = FL_POSIX;
fl->fl_ops = NULL;
fl->fl_lmops = NULL;
return assign_type(fl, l->l_type);
}
/* Verify a "struct flock" and copy it to a "struct file_lock" as a POSIX
* style lock.
*/
static int flock_to_posix_lock(struct file *filp, struct file_lock *fl,
struct flock *l)
{
struct flock64 ll = {
.l_type = l->l_type,
.l_whence = l->l_whence,
.l_start = l->l_start,
.l_len = l->l_len,
};
return flock64_to_posix_lock(filp, fl, &ll);
}
/* default lease lock manager operations */
static bool
lease_break_callback(struct file_lock *fl)
{
kill_fasync(&fl->fl_fasync, SIGIO, POLL_MSG);
return false;
}
static void
lease_setup(struct file_lock *fl, void **priv)
{
struct file *filp = fl->fl_file;
struct fasync_struct *fa = *priv;
/*
* fasync_insert_entry() returns the old entry if any. If there was no
* old entry, then it used "priv" and inserted it into the fasync list.
* Clear the pointer to indicate that it shouldn't be freed.
*/
if (!fasync_insert_entry(fa->fa_fd, filp, &fl->fl_fasync, fa))
*priv = NULL;
__f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
}
static const struct lock_manager_operations lease_manager_ops = {
.lm_break = lease_break_callback,
.lm_change = lease_modify,
.lm_setup = lease_setup,
};
/*
* Initialize a lease, use the default lock manager operations
*/
static int lease_init(struct file *filp, long type, struct file_lock *fl)
{
if (assign_type(fl, type) != 0)
return -EINVAL;
fl->fl_owner = filp;
fl->fl_pid = current->tgid;
fl->fl_file = filp;
fl->fl_flags = FL_LEASE;
fl->fl_start = 0;
fl->fl_end = OFFSET_MAX;
fl->fl_ops = NULL;
fl->fl_lmops = &lease_manager_ops;
return 0;
}
/* Allocate a file_lock initialised to this type of lease */
static struct file_lock *lease_alloc(struct file *filp, long type)
{
struct file_lock *fl = locks_alloc_lock();
int error = -ENOMEM;
if (fl == NULL)
return ERR_PTR(error);
error = lease_init(filp, type, fl);
if (error) {
locks_free_lock(fl);
return ERR_PTR(error);
}
return fl;
}
/* Check if two locks overlap each other.
*/
static inline int locks_overlap(struct file_lock *fl1, struct file_lock *fl2)
{
return ((fl1->fl_end >= fl2->fl_start) &&
(fl2->fl_end >= fl1->fl_start));
}
/*
* Check whether two locks have the same owner.
*/
static int posix_same_owner(struct file_lock *fl1, struct file_lock *fl2)
{
if (fl1->fl_lmops && fl1->fl_lmops->lm_compare_owner)
return fl2->fl_lmops == fl1->fl_lmops &&
fl1->fl_lmops->lm_compare_owner(fl1, fl2);
return fl1->fl_owner == fl2->fl_owner;
}
/* Must be called with the flc_lock held! */
static void locks_insert_global_locks(struct file_lock *fl)
{
struct file_lock_list_struct *fll = this_cpu_ptr(&file_lock_list);
percpu_rwsem_assert_held(&file_rwsem);
spin_lock(&fll->lock);
fl->fl_link_cpu = smp_processor_id();
hlist_add_head(&fl->fl_link, &fll->hlist);
spin_unlock(&fll->lock);
}
/* Must be called with the flc_lock held! */
static void locks_delete_global_locks(struct file_lock *fl)
{
struct file_lock_list_struct *fll;
percpu_rwsem_assert_held(&file_rwsem);
/*
* Avoid taking lock if already unhashed. This is safe since this check
* is done while holding the flc_lock, and new insertions into the list
* also require that it be held.
*/
if (hlist_unhashed(&fl->fl_link))
return;
fll = per_cpu_ptr(&file_lock_list, fl->fl_link_cpu);
spin_lock(&fll->lock);
hlist_del_init(&fl->fl_link);
spin_unlock(&fll->lock);
}
static unsigned long
posix_owner_key(struct file_lock *fl)
{
if (fl->fl_lmops && fl->fl_lmops->lm_owner_key)
return fl->fl_lmops->lm_owner_key(fl);
return (unsigned long)fl->fl_owner;
}
static void locks_insert_global_blocked(struct file_lock *waiter)
{
lockdep_assert_held(&blocked_lock_lock);
hash_add(blocked_hash, &waiter->fl_link, posix_owner_key(waiter));
}
static void locks_delete_global_blocked(struct file_lock *waiter)
{
lockdep_assert_held(&blocked_lock_lock);
hash_del(&waiter->fl_link);
}
/* Remove waiter from blocker's block list.
* When blocker ends up pointing to itself then the list is empty.
*
* Must be called with blocked_lock_lock held.
*/
static void __locks_delete_block(struct file_lock *waiter)
{
locks_delete_global_blocked(waiter);
list_del_init(&waiter->fl_block);
waiter->fl_next = NULL;
}
static void locks_delete_block(struct file_lock *waiter)
{
spin_lock(&blocked_lock_lock);
__locks_delete_block(waiter);
spin_unlock(&blocked_lock_lock);
}
/* Insert waiter into blocker's block list.
* We use a circular list so that processes can be easily woken up in
* the order they blocked. The documentation doesn't require this but
* it seems like the reasonable thing to do.
*
* Must be called with both the flc_lock and blocked_lock_lock held. The
* fl_block list itself is protected by the blocked_lock_lock, but by ensuring
* that the flc_lock is also held on insertions we can avoid taking the
* blocked_lock_lock in some cases when we see that the fl_block list is empty.
*/
static void __locks_insert_block(struct file_lock *blocker,
struct file_lock *waiter)
{
BUG_ON(!list_empty(&waiter->fl_block));
waiter->fl_next = blocker;
list_add_tail(&waiter->fl_block, &blocker->fl_block);
if (IS_POSIX(blocker) && !IS_OFDLCK(blocker))
locks_insert_global_blocked(waiter);
}
/* Must be called with flc_lock held. */
static void locks_insert_block(struct file_lock *blocker,
struct file_lock *waiter)
{
spin_lock(&blocked_lock_lock);
__locks_insert_block(blocker, waiter);
spin_unlock(&blocked_lock_lock);
}
/*
* Wake up processes blocked waiting for blocker.
*
* Must be called with the inode->flc_lock held!
*/
static void locks_wake_up_blocks(struct file_lock *blocker)
{
/*
* Avoid taking global lock if list is empty. This is safe since new
* blocked requests are only added to the list under the flc_lock, and
* the flc_lock is always held here. Note that removal from the fl_block
* list does not require the flc_lock, so we must recheck list_empty()
* after acquiring the blocked_lock_lock.
*/
if (list_empty(&blocker->fl_block))
return;
spin_lock(&blocked_lock_lock);
while (!list_empty(&blocker->fl_block)) {
struct file_lock *waiter;
waiter = list_first_entry(&blocker->fl_block,
struct file_lock, fl_block);
__locks_delete_block(waiter);
if (waiter->fl_lmops && waiter->fl_lmops->lm_notify)
waiter->fl_lmops->lm_notify(waiter);
else
wake_up(&waiter->fl_wait);
}
spin_unlock(&blocked_lock_lock);
}
static void
locks_insert_lock_ctx(struct file_lock *fl, struct list_head *before)
{
fl->fl_nspid = get_pid(task_tgid(current));
list_add_tail(&fl->fl_list, before);
locks_insert_global_locks(fl);
}
static void
locks_unlink_lock_ctx(struct file_lock *fl)
{
locks_delete_global_locks(fl);
list_del_init(&fl->fl_list);
if (fl->fl_nspid) {
put_pid(fl->fl_nspid);
fl->fl_nspid = NULL;
}
locks_wake_up_blocks(fl);
}
static void
locks_delete_lock_ctx(struct file_lock *fl, struct list_head *dispose)
{
locks_unlink_lock_ctx(fl);
if (dispose)
list_add(&fl->fl_list, dispose);
else
locks_free_lock(fl);
}
/* Determine if lock sys_fl blocks lock caller_fl. Common functionality
* checks for shared/exclusive status of overlapping locks.
*/
static int locks_conflict(struct file_lock *caller_fl, struct file_lock *sys_fl)
{
if (sys_fl->fl_type == F_WRLCK)
return 1;
if (caller_fl->fl_type == F_WRLCK)
return 1;
return 0;
}
/* Determine if lock sys_fl blocks lock caller_fl. POSIX specific
* checking before calling the locks_conflict().
*/
static int posix_locks_conflict(struct file_lock *caller_fl, struct file_lock *sys_fl)
{
/* POSIX locks owned by the same process do not conflict with
* each other.
*/
if (posix_same_owner(caller_fl, sys_fl))
return (0);
/* Check whether they overlap */
if (!locks_overlap(caller_fl, sys_fl))
return 0;
return (locks_conflict(caller_fl, sys_fl));
}
/* Determine if lock sys_fl blocks lock caller_fl. FLOCK specific
* checking before calling the locks_conflict().
*/
static int flock_locks_conflict(struct file_lock *caller_fl, struct file_lock *sys_fl)
{
/* FLOCK locks referring to the same filp do not conflict with
* each other.
*/
if (caller_fl->fl_file == sys_fl->fl_file)
return (0);
if ((caller_fl->fl_type & LOCK_MAND) || (sys_fl->fl_type & LOCK_MAND))
return 0;
return (locks_conflict(caller_fl, sys_fl));
}
void
posix_test_lock(struct file *filp, struct file_lock *fl)
{
struct file_lock *cfl;
struct file_lock_context *ctx;
struct inode *inode = locks_inode(filp);
ctx = smp_load_acquire(&inode->i_flctx);
if (!ctx || list_empty_careful(&ctx->flc_posix)) {
fl->fl_type = F_UNLCK;
return;
}
spin_lock(&ctx->flc_lock);
list_for_each_entry(cfl, &ctx->flc_posix, fl_list) {
if (posix_locks_conflict(fl, cfl)) {
locks_copy_conflock(fl, cfl);
if (cfl->fl_nspid)
fl->fl_pid = pid_vnr(cfl->fl_nspid);
goto out;
}
}
fl->fl_type = F_UNLCK;
out:
spin_unlock(&ctx->flc_lock);
return;
}
EXPORT_SYMBOL(posix_test_lock);
/*
* Deadlock detection:
*
* We attempt to detect deadlocks that are due purely to posix file
* locks.
*
* We assume that a task can be waiting for at most one lock at a time.
* So for any acquired lock, the process holding that lock may be
* waiting on at most one other lock. That lock in turns may be held by
* someone waiting for at most one other lock. Given a requested lock
* caller_fl which is about to wait for a conflicting lock block_fl, we
* follow this chain of waiters to ensure we are not about to create a
* cycle.
*
* Since we do this before we ever put a process to sleep on a lock, we
* are ensured that there is never a cycle; that is what guarantees that
* the while() loop in posix_locks_deadlock() eventually completes.
*
* Note: the above assumption may not be true when handling lock
* requests from a broken NFS client. It may also fail in the presence
* of tasks (such as posix threads) sharing the same open file table.
* To handle those cases, we just bail out after a few iterations.
*
* For FL_OFDLCK locks, the owner is the filp, not the files_struct.
* Because the owner is not even nominally tied to a thread of
* execution, the deadlock detection below can't reasonably work well. Just
* skip it for those.
*
* In principle, we could do a more limited deadlock detection on FL_OFDLCK
* locks that just checks for the case where two tasks are attempting to
* upgrade from read to write locks on the same inode.
*/
#define MAX_DEADLK_ITERATIONS 10
/* Find a lock that the owner of the given block_fl is blocking on. */
static struct file_lock *what_owner_is_waiting_for(struct file_lock *block_fl)
{
struct file_lock *fl;
hash_for_each_possible(blocked_hash, fl, fl_link, posix_owner_key(block_fl)) {
if (posix_same_owner(fl, block_fl))
return fl->fl_next;
}
return NULL;
}
/* Must be called with the blocked_lock_lock held! */
static int posix_locks_deadlock(struct file_lock *caller_fl,
struct file_lock *block_fl)
{
int i = 0;
lockdep_assert_held(&blocked_lock_lock);
/*
* This deadlock detector can't reasonably detect deadlocks with
* FL_OFDLCK locks, since they aren't owned by a process, per-se.
*/
if (IS_OFDLCK(caller_fl))
return 0;
while ((block_fl = what_owner_is_waiting_for(block_fl))) {
if (i++ > MAX_DEADLK_ITERATIONS)
return 0;
if (posix_same_owner(caller_fl, block_fl))
return 1;
}
return 0;
}
/* Try to create a FLOCK lock on filp. We always insert new FLOCK locks
* after any leases, but before any posix locks.
*
* Note that if called with an FL_EXISTS argument, the caller may determine
* whether or not a lock was successfully freed by testing the return
* value for -ENOENT.
*/
static int flock_lock_inode(struct inode *inode, struct file_lock *request)
{
struct file_lock *new_fl = NULL;
struct file_lock *fl;
struct file_lock_context *ctx;
int error = 0;
bool found = false;
LIST_HEAD(dispose);
ctx = locks_get_lock_context(inode, request->fl_type);
if (!ctx) {
if (request->fl_type != F_UNLCK)
return -ENOMEM;
return (request->fl_flags & FL_EXISTS) ? -ENOENT : 0;
}
if (!(request->fl_flags & FL_ACCESS) && (request->fl_type != F_UNLCK)) {
new_fl = locks_alloc_lock();
if (!new_fl)
return -ENOMEM;
}
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
if (request->fl_flags & FL_ACCESS)
goto find_conflict;
list_for_each_entry(fl, &ctx->flc_flock, fl_list) {
if (request->fl_file != fl->fl_file)
continue;
if (request->fl_type == fl->fl_type)
goto out;
found = true;
locks_delete_lock_ctx(fl, &dispose);
break;
}
if (request->fl_type == F_UNLCK) {
if ((request->fl_flags & FL_EXISTS) && !found)
error = -ENOENT;
goto out;
}
find_conflict:
list_for_each_entry(fl, &ctx->flc_flock, fl_list) {
if (!flock_locks_conflict(request, fl))
continue;
error = -EAGAIN;
if (!(request->fl_flags & FL_SLEEP))
goto out;
error = FILE_LOCK_DEFERRED;
locks_insert_block(fl, request);
goto out;
}
if (request->fl_flags & FL_ACCESS)
goto out;
locks_copy_lock(new_fl, request);
locks_insert_lock_ctx(new_fl, &ctx->flc_flock);
new_fl = NULL;
error = 0;
out:
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
if (new_fl)
locks_free_lock(new_fl);
locks_dispose_list(&dispose);
return error;
}
static int posix_lock_inode(struct inode *inode, struct file_lock *request,
struct file_lock *conflock)
{
struct file_lock *fl, *tmp;
struct file_lock *new_fl = NULL;
struct file_lock *new_fl2 = NULL;
struct file_lock *left = NULL;
struct file_lock *right = NULL;
struct file_lock_context *ctx;
int error;
bool added = false;
LIST_HEAD(dispose);
ctx = locks_get_lock_context(inode, request->fl_type);
if (!ctx)
return (request->fl_type == F_UNLCK) ? 0 : -ENOMEM;
/*
* We may need two file_lock structures for this operation,
* so we get them in advance to avoid races.
*
* In some cases we can be sure, that no new locks will be needed
*/
if (!(request->fl_flags & FL_ACCESS) &&
(request->fl_type != F_UNLCK ||
request->fl_start != 0 || request->fl_end != OFFSET_MAX)) {
new_fl = locks_alloc_lock();
new_fl2 = locks_alloc_lock();
}
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
/*
* New lock request. Walk all POSIX locks and look for conflicts. If
* there are any, either return error or put the request on the
* blocker's list of waiters and the global blocked_hash.
*/
if (request->fl_type != F_UNLCK) {
list_for_each_entry(fl, &ctx->flc_posix, fl_list) {
if (!posix_locks_conflict(request, fl))
continue;
if (conflock)
locks_copy_conflock(conflock, fl);
error = -EAGAIN;
if (!(request->fl_flags & FL_SLEEP))
goto out;
/*
* Deadlock detection and insertion into the blocked
* locks list must be done while holding the same lock!
*/
error = -EDEADLK;
spin_lock(&blocked_lock_lock);
if (likely(!posix_locks_deadlock(request, fl))) {
error = FILE_LOCK_DEFERRED;
__locks_insert_block(fl, request);
}
spin_unlock(&blocked_lock_lock);
goto out;
}
}
/* If we're just looking for a conflict, we're done. */
error = 0;
if (request->fl_flags & FL_ACCESS)
goto out;
/* Find the first old lock with the same owner as the new lock */
list_for_each_entry(fl, &ctx->flc_posix, fl_list) {
if (posix_same_owner(request, fl))
break;
}
/* Process locks with this owner. */
list_for_each_entry_safe_from(fl, tmp, &ctx->flc_posix, fl_list) {
if (!posix_same_owner(request, fl))
break;
/* Detect adjacent or overlapping regions (if same lock type) */
if (request->fl_type == fl->fl_type) {
/* In all comparisons of start vs end, use
* "start - 1" rather than "end + 1". If end
* is OFFSET_MAX, end + 1 will become negative.
*/
if (fl->fl_end < request->fl_start - 1)
continue;
/* If the next lock in the list has entirely bigger
* addresses than the new one, insert the lock here.
*/
if (fl->fl_start - 1 > request->fl_end)
break;
/* If we come here, the new and old lock are of the
* same type and adjacent or overlapping. Make one
* lock yielding from the lower start address of both
* locks to the higher end address.
*/
if (fl->fl_start > request->fl_start)
fl->fl_start = request->fl_start;
else
request->fl_start = fl->fl_start;
if (fl->fl_end < request->fl_end)
fl->fl_end = request->fl_end;
else
request->fl_end = fl->fl_end;
if (added) {
locks_delete_lock_ctx(fl, &dispose);
continue;
}
request = fl;
added = true;
} else {
/* Processing for different lock types is a bit
* more complex.
*/
if (fl->fl_end < request->fl_start)
continue;
if (fl->fl_start > request->fl_end)
break;
if (request->fl_type == F_UNLCK)
added = true;
if (fl->fl_start < request->fl_start)
left = fl;
/* If the next lock in the list has a higher end
* address than the new one, insert the new one here.
*/
if (fl->fl_end > request->fl_end) {
right = fl;
break;
}
if (fl->fl_start >= request->fl_start) {
/* The new lock completely replaces an old
* one (This may happen several times).
*/
if (added) {
locks_delete_lock_ctx(fl, &dispose);
continue;
}
/*
* Replace the old lock with new_fl, and
* remove the old one. It's safe to do the
* insert here since we know that we won't be
* using new_fl later, and that the lock is
* just replacing an existing lock.
*/
error = -ENOLCK;
if (!new_fl)
goto out;
locks_copy_lock(new_fl, request);
request = new_fl;
new_fl = NULL;
locks_insert_lock_ctx(request, &fl->fl_list);
locks_delete_lock_ctx(fl, &dispose);
added = true;
}
}
}
/*
* The above code only modifies existing locks in case of merging or
* replacing. If new lock(s) need to be inserted all modifications are
* done below this, so it's safe yet to bail out.
*/
error = -ENOLCK; /* "no luck" */
if (right && left == right && !new_fl2)
goto out;
error = 0;
if (!added) {
if (request->fl_type == F_UNLCK) {
if (request->fl_flags & FL_EXISTS)
error = -ENOENT;
goto out;
}
if (!new_fl) {
error = -ENOLCK;
goto out;
}
locks_copy_lock(new_fl, request);
locks_insert_lock_ctx(new_fl, &fl->fl_list);
fl = new_fl;
new_fl = NULL;
}
if (right) {
if (left == right) {
/* The new lock breaks the old one in two pieces,
* so we have to use the second new lock.
*/
left = new_fl2;
new_fl2 = NULL;
locks_copy_lock(left, right);
locks_insert_lock_ctx(left, &fl->fl_list);
}
right->fl_start = request->fl_end + 1;
locks_wake_up_blocks(right);
}
if (left) {
left->fl_end = request->fl_start - 1;
locks_wake_up_blocks(left);
}
out:
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
/*
* Free any unused locks.
*/
if (new_fl)
locks_free_lock(new_fl);
if (new_fl2)
locks_free_lock(new_fl2);
locks_dispose_list(&dispose);
trace_posix_lock_inode(inode, request, error);
return error;
}
/**
* posix_lock_file - Apply a POSIX-style lock to a file
* @filp: The file to apply the lock to
* @fl: The lock to be applied
* @conflock: Place to return a copy of the conflicting lock, if found.
*
* Add a POSIX style lock to a file.
* We merge adjacent & overlapping locks whenever possible.
* POSIX locks are sorted by owner task, then by starting address
*
* Note that if called with an FL_EXISTS argument, the caller may determine
* whether or not a lock was successfully freed by testing the return
* value for -ENOENT.
*/
int posix_lock_file(struct file *filp, struct file_lock *fl,
struct file_lock *conflock)
{
return posix_lock_inode(locks_inode(filp), fl, conflock);
}
EXPORT_SYMBOL(posix_lock_file);
/**
* posix_lock_inode_wait - Apply a POSIX-style lock to a file
* @inode: inode of file to which lock request should be applied
* @fl: The lock to be applied
*
* Apply a POSIX style lock request to an inode.
*/
static int posix_lock_inode_wait(struct inode *inode, struct file_lock *fl)
{
int error;
might_sleep ();
for (;;) {
error = posix_lock_inode(inode, fl, NULL);
if (error != FILE_LOCK_DEFERRED)
break;
error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
if (!error)
continue;
locks_delete_block(fl);
break;
}
return error;
}
#ifdef CONFIG_MANDATORY_FILE_LOCKING
/**
* locks_mandatory_locked - Check for an active lock
* @file: the file to check
*
* Searches the inode's list of locks to find any POSIX locks which conflict.
* This function is called from locks_verify_locked() only.
*/
int locks_mandatory_locked(struct file *file)
{
int ret;
struct inode *inode = locks_inode(file);
struct file_lock_context *ctx;
struct file_lock *fl;
ctx = smp_load_acquire(&inode->i_flctx);
if (!ctx || list_empty_careful(&ctx->flc_posix))
return 0;
/*
* Search the lock list for this inode for any POSIX locks.
*/
spin_lock(&ctx->flc_lock);
ret = 0;
list_for_each_entry(fl, &ctx->flc_posix, fl_list) {
if (fl->fl_owner != current->files &&
fl->fl_owner != file) {
ret = -EAGAIN;
break;
}
}
spin_unlock(&ctx->flc_lock);
return ret;
}
/**
* locks_mandatory_area - Check for a conflicting lock
* @inode: the file to check
* @filp: how the file was opened (if it was)
* @start: first byte in the file to check
* @end: lastbyte in the file to check
* @type: %F_WRLCK for a write lock, else %F_RDLCK
*
* Searches the inode's list of locks to find any POSIX locks which conflict.
*/
int locks_mandatory_area(struct inode *inode, struct file *filp, loff_t start,
loff_t end, unsigned char type)
{
struct file_lock fl;
int error;
bool sleep = false;
locks_init_lock(&fl);
fl.fl_pid = current->tgid;
fl.fl_file = filp;
fl.fl_flags = FL_POSIX | FL_ACCESS;
if (filp && !(filp->f_flags & O_NONBLOCK))
sleep = true;
fl.fl_type = type;
fl.fl_start = start;
fl.fl_end = end;
for (;;) {
if (filp) {
fl.fl_owner = filp;
fl.fl_flags &= ~FL_SLEEP;
error = posix_lock_inode(inode, &fl, NULL);
if (!error)
break;
}
if (sleep)
fl.fl_flags |= FL_SLEEP;
fl.fl_owner = current->files;
error = posix_lock_inode(inode, &fl, NULL);
if (error != FILE_LOCK_DEFERRED)
break;
error = wait_event_interruptible(fl.fl_wait, !fl.fl_next);
if (!error) {
/*
* If we've been sleeping someone might have
* changed the permissions behind our back.
*/
if (__mandatory_lock(inode))
continue;
}
locks_delete_block(&fl);
break;
}
return error;
}
EXPORT_SYMBOL(locks_mandatory_area);
#endif /* CONFIG_MANDATORY_FILE_LOCKING */
static void lease_clear_pending(struct file_lock *fl, int arg)
{
switch (arg) {
case F_UNLCK:
fl->fl_flags &= ~FL_UNLOCK_PENDING;
/* fall through: */
case F_RDLCK:
fl->fl_flags &= ~FL_DOWNGRADE_PENDING;
}
}
/* We already had a lease on this file; just change its type */
int lease_modify(struct file_lock *fl, int arg, struct list_head *dispose)
{
int error = assign_type(fl, arg);
if (error)
return error;
lease_clear_pending(fl, arg);
locks_wake_up_blocks(fl);
if (arg == F_UNLCK) {
struct file *filp = fl->fl_file;
f_delown(filp);
filp->f_owner.signum = 0;
fasync_helper(0, fl->fl_file, 0, &fl->fl_fasync);
if (fl->fl_fasync != NULL) {
printk(KERN_ERR "locks_delete_lock: fasync == %p\n", fl->fl_fasync);
fl->fl_fasync = NULL;
}
locks_delete_lock_ctx(fl, dispose);
}
return 0;
}
EXPORT_SYMBOL(lease_modify);
static bool past_time(unsigned long then)
{
if (!then)
/* 0 is a special value meaning "this never expires": */
return false;
return time_after(jiffies, then);
}
static void time_out_leases(struct inode *inode, struct list_head *dispose)
{
struct file_lock_context *ctx = inode->i_flctx;
struct file_lock *fl, *tmp;
lockdep_assert_held(&ctx->flc_lock);
list_for_each_entry_safe(fl, tmp, &ctx->flc_lease, fl_list) {
trace_time_out_leases(inode, fl);
if (past_time(fl->fl_downgrade_time))
lease_modify(fl, F_RDLCK, dispose);
if (past_time(fl->fl_break_time))
lease_modify(fl, F_UNLCK, dispose);
}
}
static bool leases_conflict(struct file_lock *lease, struct file_lock *breaker)
{
if ((breaker->fl_flags & FL_LAYOUT) != (lease->fl_flags & FL_LAYOUT))
return false;
if ((breaker->fl_flags & FL_DELEG) && (lease->fl_flags & FL_LEASE))
return false;
return locks_conflict(breaker, lease);
}
static bool
any_leases_conflict(struct inode *inode, struct file_lock *breaker)
{
struct file_lock_context *ctx = inode->i_flctx;
struct file_lock *fl;
lockdep_assert_held(&ctx->flc_lock);
list_for_each_entry(fl, &ctx->flc_lease, fl_list) {
if (leases_conflict(fl, breaker))
return true;
}
return false;
}
/**
* __break_lease - revoke all outstanding leases on file
* @inode: the inode of the file to return
* @mode: O_RDONLY: break only write leases; O_WRONLY or O_RDWR:
* break all leases
* @type: FL_LEASE: break leases and delegations; FL_DELEG: break
* only delegations
*
* break_lease (inlined for speed) has checked there already is at least
* some kind of lock (maybe a lease) on this file. Leases are broken on
* a call to open() or truncate(). This function can sleep unless you
* specified %O_NONBLOCK to your open().
*/
int __break_lease(struct inode *inode, unsigned int mode, unsigned int type)
{
int error = 0;
struct file_lock_context *ctx;
struct file_lock *new_fl, *fl, *tmp;
unsigned long break_time;
int want_write = (mode & O_ACCMODE) != O_RDONLY;
LIST_HEAD(dispose);
new_fl = lease_alloc(NULL, want_write ? F_WRLCK : F_RDLCK);
if (IS_ERR(new_fl))
return PTR_ERR(new_fl);
new_fl->fl_flags = type;
/* typically we will check that ctx is non-NULL before calling */
ctx = smp_load_acquire(&inode->i_flctx);
if (!ctx) {
WARN_ON_ONCE(1);
return error;
}
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
time_out_leases(inode, &dispose);
if (!any_leases_conflict(inode, new_fl))
goto out;
break_time = 0;
if (lease_break_time > 0) {
break_time = jiffies + lease_break_time * HZ;
if (break_time == 0)
break_time++; /* so that 0 means no break time */
}
list_for_each_entry_safe(fl, tmp, &ctx->flc_lease, fl_list) {
if (!leases_conflict(fl, new_fl))
continue;
if (want_write) {
if (fl->fl_flags & FL_UNLOCK_PENDING)
continue;
fl->fl_flags |= FL_UNLOCK_PENDING;
fl->fl_break_time = break_time;
} else {
if (lease_breaking(fl))
continue;
fl->fl_flags |= FL_DOWNGRADE_PENDING;
fl->fl_downgrade_time = break_time;
}
if (fl->fl_lmops->lm_break(fl))
locks_delete_lock_ctx(fl, &dispose);
}
if (list_empty(&ctx->flc_lease))
goto out;
if (mode & O_NONBLOCK) {
trace_break_lease_noblock(inode, new_fl);
error = -EWOULDBLOCK;
goto out;
}
restart:
fl = list_first_entry(&ctx->flc_lease, struct file_lock, fl_list);
break_time = fl->fl_break_time;
if (break_time != 0)
break_time -= jiffies;
if (break_time == 0)
break_time++;
locks_insert_block(fl, new_fl);
trace_break_lease_block(inode, new_fl);
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
error = wait_event_interruptible_timeout(new_fl->fl_wait,
!new_fl->fl_next, break_time);
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
trace_break_lease_unblock(inode, new_fl);
locks_delete_block(new_fl);
if (error >= 0) {
/*
* Wait for the next conflicting lease that has not been
* broken yet
*/
if (error == 0)
time_out_leases(inode, &dispose);
if (any_leases_conflict(inode, new_fl))
goto restart;
error = 0;
}
out:
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
locks_free_lock(new_fl);
return error;
}
EXPORT_SYMBOL(__break_lease);
/**
fs: fix kernel-doc notation warnings Fix kernel-doc notation warnings in fs/. Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line: * mark_files_ro Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line: * lookup_one_len: filesystem helper to lookup single pathname component Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line: * bh_uptodate_or_lock: Test whether the buffer is uptodate Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line: * bh_submit_read: Submit a locked buffer for reading Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line: * writeback_acquire: attempt to get exclusive writeback access to a device Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line: * writeback_in_progress: determine whether there is writeback in progress Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line: * writeback_release: relinquish exclusive writeback access against a device. Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line: * void journal_invalidatepage() Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-20 07:01:00 +07:00
* lease_get_mtime - get the last modified time of an inode
* @inode: the inode
* @time: pointer to a timespec which will contain the last modified time
*
* This is to force NFS clients to flush their caches for files with
* exclusive leases. The justification is that if someone has an
fs: fix kernel-doc notation warnings Fix kernel-doc notation warnings in fs/. Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line: * mark_files_ro Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line: * lookup_one_len: filesystem helper to lookup single pathname component Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line: * bh_uptodate_or_lock: Test whether the buffer is uptodate Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line: * bh_submit_read: Submit a locked buffer for reading Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line: * writeback_acquire: attempt to get exclusive writeback access to a device Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line: * writeback_in_progress: determine whether there is writeback in progress Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line: * writeback_release: relinquish exclusive writeback access against a device. Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line: * void journal_invalidatepage() Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-20 07:01:00 +07:00
* exclusive lease, then they could be modifying it.
*/
void lease_get_mtime(struct inode *inode, struct timespec *time)
{
bool has_lease = false;
struct file_lock_context *ctx;
struct file_lock *fl;
ctx = smp_load_acquire(&inode->i_flctx);
if (ctx && !list_empty_careful(&ctx->flc_lease)) {
spin_lock(&ctx->flc_lock);
fl = list_first_entry_or_null(&ctx->flc_lease,
struct file_lock, fl_list);
if (fl && (fl->fl_type == F_WRLCK))
has_lease = true;
spin_unlock(&ctx->flc_lock);
}
if (has_lease)
*time = current_time(inode);
else
*time = inode->i_mtime;
}
EXPORT_SYMBOL(lease_get_mtime);
/**
* fcntl_getlease - Enquire what lease is currently active
* @filp: the file
*
* The value returned by this function will be one of
* (if no lease break is pending):
*
* %F_RDLCK to indicate a shared lease is held.
*
* %F_WRLCK to indicate an exclusive lease is held.
*
* %F_UNLCK to indicate no lease is held.
*
* (if a lease break is pending):
*
* %F_RDLCK to indicate an exclusive lease needs to be
* changed to a shared lease (or removed).
*
* %F_UNLCK to indicate the lease needs to be removed.
*
* XXX: sfr & willy disagree over whether F_INPROGRESS
* should be returned to userspace.
*/
int fcntl_getlease(struct file *filp)
{
struct file_lock *fl;
struct inode *inode = locks_inode(filp);
struct file_lock_context *ctx;
int type = F_UNLCK;
LIST_HEAD(dispose);
ctx = smp_load_acquire(&inode->i_flctx);
if (ctx && !list_empty_careful(&ctx->flc_lease)) {
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
time_out_leases(inode, &dispose);
list_for_each_entry(fl, &ctx->flc_lease, fl_list) {
if (fl->fl_file != filp)
continue;
type = target_leasetype(fl);
break;
}
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
}
return type;
}
/**
* check_conflicting_open - see if the given dentry points to a file that has
* an existing open that would conflict with the
* desired lease.
* @dentry: dentry to check
* @arg: type of lease that we're trying to acquire
* @flags: current lock flags
*
* Check to see if there's an existing open fd on this file that would
* conflict with the lease we're trying to set.
*/
static int
check_conflicting_open(const struct dentry *dentry, const long arg, int flags)
{
int ret = 0;
struct inode *inode = dentry->d_inode;
if (flags & FL_LAYOUT)
return 0;
if ((arg == F_RDLCK) &&
(atomic_read(&d_real_inode(dentry)->i_writecount) > 0))
return -EAGAIN;
if ((arg == F_WRLCK) && ((d_count(dentry) > 1) ||
(atomic_read(&inode->i_count) > 1)))
ret = -EAGAIN;
return ret;
}
static int
generic_add_lease(struct file *filp, long arg, struct file_lock **flp, void **priv)
{
struct file_lock *fl, *my_fl = NULL, *lease;
struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct file_lock_context *ctx;
bool is_deleg = (*flp)->fl_flags & FL_DELEG;
int error;
LIST_HEAD(dispose);
lease = *flp;
trace_generic_add_lease(inode, lease);
/* Note that arg is never F_UNLCK here */
ctx = locks_get_lock_context(inode, arg);
if (!ctx)
return -ENOMEM;
/*
* In the delegation case we need mutual exclusion with
* a number of operations that take the i_mutex. We trylock
* because delegations are an optional optimization, and if
* there's some chance of a conflict--we'd rather not
* bother, maybe that's a sign this just isn't a good file to
* hand out a delegation on.
*/
if (is_deleg && !inode_trylock(inode))
return -EAGAIN;
if (is_deleg && arg == F_WRLCK) {
/* Write delegations are not currently supported: */
inode_unlock(inode);
WARN_ON_ONCE(1);
return -EINVAL;
}
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
time_out_leases(inode, &dispose);
error = check_conflicting_open(dentry, arg, lease->fl_flags);
if (error)
goto out;
/*
* At this point, we know that if there is an exclusive
* lease on this file, then we hold it on this filp
* (otherwise our open of this file would have blocked).
* And if we are trying to acquire an exclusive lease,
* then the file is not open by anyone (including us)
* except for this filp.
*/
error = -EAGAIN;
list_for_each_entry(fl, &ctx->flc_lease, fl_list) {
if (fl->fl_file == filp &&
fl->fl_owner == lease->fl_owner) {
my_fl = fl;
continue;
}
/*
* No exclusive leases if someone else has a lease on
* this file:
*/
if (arg == F_WRLCK)
goto out;
/*
* Modifying our existing lease is OK, but no getting a
* new lease if someone else is opening for write:
*/
if (fl->fl_flags & FL_UNLOCK_PENDING)
goto out;
}
if (my_fl != NULL) {
lease = my_fl;
error = lease->fl_lmops->lm_change(lease, arg, &dispose);
if (error)
goto out;
goto out_setup;
}
error = -EINVAL;
if (!leases_enable)
goto out;
locks_insert_lock_ctx(lease, &ctx->flc_lease);
/*
* The check in break_lease() is lockless. It's possible for another
* open to race in after we did the earlier check for a conflicting
* open but before the lease was inserted. Check again for a
* conflicting open and cancel the lease if there is one.
*
* We also add a barrier here to ensure that the insertion of the lock
* precedes these checks.
*/
smp_mb();
error = check_conflicting_open(dentry, arg, lease->fl_flags);
if (error) {
locks_unlink_lock_ctx(lease);
goto out;
}
out_setup:
if (lease->fl_lmops->lm_setup)
lease->fl_lmops->lm_setup(lease, priv);
out:
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
if (is_deleg)
inode_unlock(inode);
if (!error && !my_fl)
*flp = NULL;
return error;
}
static int generic_delete_lease(struct file *filp, void *owner)
{
int error = -EAGAIN;
struct file_lock *fl, *victim = NULL;
struct inode *inode = locks_inode(filp);
struct file_lock_context *ctx;
LIST_HEAD(dispose);
ctx = smp_load_acquire(&inode->i_flctx);
if (!ctx) {
trace_generic_delete_lease(inode, NULL);
return error;
}
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
list_for_each_entry(fl, &ctx->flc_lease, fl_list) {
if (fl->fl_file == filp &&
fl->fl_owner == owner) {
victim = fl;
break;
}
}
trace_generic_delete_lease(inode, victim);
if (victim)
error = fl->fl_lmops->lm_change(victim, F_UNLCK, &dispose);
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
return error;
}
/**
* generic_setlease - sets a lease on an open file
* @filp: file pointer
* @arg: type of lease to obtain
* @flp: input - file_lock to use, output - file_lock inserted
* @priv: private data for lm_setup (may be NULL if lm_setup
* doesn't require it)
*
* The (input) flp->fl_lmops->lm_break function is required
* by break_lease().
*/
int generic_setlease(struct file *filp, long arg, struct file_lock **flp,
void **priv)
{
struct inode *inode = locks_inode(filp);
int error;
if ((!uid_eq(current_fsuid(), inode->i_uid)) && !capable(CAP_LEASE))
return -EACCES;
if (!S_ISREG(inode->i_mode))
return -EINVAL;
error = security_file_lock(filp, arg);
if (error)
return error;
switch (arg) {
case F_UNLCK:
return generic_delete_lease(filp, *priv);
case F_RDLCK:
case F_WRLCK:
if (!(*flp)->fl_lmops->lm_break) {
WARN_ON_ONCE(1);
return -ENOLCK;
}
return generic_add_lease(filp, arg, flp, priv);
default:
return -EINVAL;
}
}
EXPORT_SYMBOL(generic_setlease);
/**
* vfs_setlease - sets a lease on an open file
* @filp: file pointer
* @arg: type of lease to obtain
* @lease: file_lock to use when adding a lease
* @priv: private info for lm_setup when adding a lease (may be
* NULL if lm_setup doesn't require it)
*
* Call this to establish a lease on the file. The "lease" argument is not
* used for F_UNLCK requests and may be NULL. For commands that set or alter
* an existing lease, the (*lease)->fl_lmops->lm_break operation must be set;
* if not, this function will return -ENOLCK (and generate a scary-looking
* stack trace).
*
* The "priv" pointer is passed directly to the lm_setup function as-is. It
* may be NULL if the lm_setup operation doesn't require it.
*/
int
vfs_setlease(struct file *filp, long arg, struct file_lock **lease, void **priv)
{
if (filp->f_op->setlease && is_remote_lock(filp))
return filp->f_op->setlease(filp, arg, lease, priv);
else
return generic_setlease(filp, arg, lease, priv);
}
EXPORT_SYMBOL_GPL(vfs_setlease);
static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
{
struct file_lock *fl;
struct fasync_struct *new;
int error;
fl = lease_alloc(filp, arg);
if (IS_ERR(fl))
return PTR_ERR(fl);
new = fasync_alloc();
if (!new) {
locks_free_lock(fl);
return -ENOMEM;
}
new->fa_fd = fd;
error = vfs_setlease(filp, arg, &fl, (void **)&new);
if (fl)
locks_free_lock(fl);
if (new)
fasync_free(new);
return error;
}
/**
* fcntl_setlease - sets a lease on an open file
* @fd: open file descriptor
* @filp: file pointer
* @arg: type of lease to obtain
*
* Call this fcntl to establish a lease on the file.
* Note that you also need to call %F_SETSIG to
* receive a signal when the lease is broken.
*/
int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
{
if (arg == F_UNLCK)
return vfs_setlease(filp, F_UNLCK, NULL, (void **)&filp);
return do_fcntl_add_lease(fd, filp, arg);
}
/**
* flock_lock_inode_wait - Apply a FLOCK-style lock to a file
* @inode: inode of the file to apply to
* @fl: The lock to be applied
*
* Apply a FLOCK style lock request to an inode.
*/
static int flock_lock_inode_wait(struct inode *inode, struct file_lock *fl)
{
int error;
might_sleep();
for (;;) {
error = flock_lock_inode(inode, fl);
if (error != FILE_LOCK_DEFERRED)
break;
error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
if (!error)
continue;
locks_delete_block(fl);
break;
}
return error;
}
/**
* locks_lock_inode_wait - Apply a lock to an inode
* @inode: inode of the file to apply to
* @fl: The lock to be applied
*
* Apply a POSIX or FLOCK style lock request to an inode.
*/
int locks_lock_inode_wait(struct inode *inode, struct file_lock *fl)
{
int res = 0;
switch (fl->fl_flags & (FL_POSIX|FL_FLOCK)) {
case FL_POSIX:
res = posix_lock_inode_wait(inode, fl);
break;
case FL_FLOCK:
res = flock_lock_inode_wait(inode, fl);
break;
default:
BUG();
}
return res;
}
EXPORT_SYMBOL(locks_lock_inode_wait);
/**
* sys_flock: - flock() system call.
* @fd: the file descriptor to lock.
* @cmd: the type of lock to apply.
*
* Apply a %FL_FLOCK style lock to an open file descriptor.
* The @cmd can be one of
*
* %LOCK_SH -- a shared lock.
*
* %LOCK_EX -- an exclusive lock.
*
* %LOCK_UN -- remove an existing lock.
*
* %LOCK_MAND -- a `mandatory' flock. This exists to emulate Windows Share Modes.
*
* %LOCK_MAND can be combined with %LOCK_READ or %LOCK_WRITE to allow other
* processes read and write access respectively.
*/
SYSCALL_DEFINE2(flock, unsigned int, fd, unsigned int, cmd)
{
struct fd f = fdget(fd);
struct file_lock *lock;
int can_sleep, unlock;
int error;
error = -EBADF;
if (!f.file)
goto out;
can_sleep = !(cmd & LOCK_NB);
cmd &= ~LOCK_NB;
unlock = (cmd == LOCK_UN);
if (!unlock && !(cmd & LOCK_MAND) &&
!(f.file->f_mode & (FMODE_READ|FMODE_WRITE)))
goto out_putf;
lock = flock_make_lock(f.file, cmd);
if (IS_ERR(lock)) {
error = PTR_ERR(lock);
goto out_putf;
}
if (can_sleep)
lock->fl_flags |= FL_SLEEP;
error = security_file_lock(f.file, lock->fl_type);
if (error)
goto out_free;
if (f.file->f_op->flock && is_remote_lock(f.file))
error = f.file->f_op->flock(f.file,
(can_sleep) ? F_SETLKW : F_SETLK,
lock);
else
error = locks_lock_file_wait(f.file, lock);
out_free:
locks_free_lock(lock);
out_putf:
fdput(f);
out:
return error;
}
/**
* vfs_test_lock - test file byte range lock
* @filp: The file to test lock for
* @fl: The lock to test; also used to hold result
*
* Returns -ERRNO on failure. Indicates presence of conflicting lock by
* setting conf->fl_type to something other than F_UNLCK.
*/
int vfs_test_lock(struct file *filp, struct file_lock *fl)
{
if (filp->f_op->lock && is_remote_lock(filp))
return filp->f_op->lock(filp, F_GETLK, fl);
posix_test_lock(filp, fl);
return 0;
}
EXPORT_SYMBOL_GPL(vfs_test_lock);
static int posix_lock_to_flock(struct flock *flock, struct file_lock *fl)
{
flock->l_pid = IS_OFDLCK(fl) ? -1 : fl->fl_pid;
#if BITS_PER_LONG == 32
/*
* Make sure we can represent the posix lock via
* legacy 32bit flock.
*/
if (fl->fl_start > OFFT_OFFSET_MAX)
return -EOVERFLOW;
if (fl->fl_end != OFFSET_MAX && fl->fl_end > OFFT_OFFSET_MAX)
return -EOVERFLOW;
#endif
flock->l_start = fl->fl_start;
flock->l_len = fl->fl_end == OFFSET_MAX ? 0 :
fl->fl_end - fl->fl_start + 1;
flock->l_whence = 0;
flock->l_type = fl->fl_type;
return 0;
}
#if BITS_PER_LONG == 32
static void posix_lock_to_flock64(struct flock64 *flock, struct file_lock *fl)
{
flock->l_pid = IS_OFDLCK(fl) ? -1 : fl->fl_pid;
flock->l_start = fl->fl_start;
flock->l_len = fl->fl_end == OFFSET_MAX ? 0 :
fl->fl_end - fl->fl_start + 1;
flock->l_whence = 0;
flock->l_type = fl->fl_type;
}
#endif
/* Report the first existing lock that would conflict with l.
* This implements the F_GETLK command of fcntl().
*/
int fcntl_getlk(struct file *filp, unsigned int cmd, struct flock __user *l)
{
struct file_lock file_lock;
struct flock flock;
int error;
error = -EFAULT;
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
error = -EINVAL;
if ((flock.l_type != F_RDLCK) && (flock.l_type != F_WRLCK))
goto out;
error = flock_to_posix_lock(filp, &file_lock, &flock);
if (error)
goto out;
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
if (cmd == F_OFD_GETLK) {
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_GETLK;
file_lock.fl_flags |= FL_OFDLCK;
file_lock.fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
}
error = vfs_test_lock(filp, &file_lock);
if (error)
goto out;
flock.l_type = file_lock.fl_type;
if (file_lock.fl_type != F_UNLCK) {
error = posix_lock_to_flock(&flock, &file_lock);
if (error)
goto rel_priv;
}
error = -EFAULT;
if (!copy_to_user(l, &flock, sizeof(flock)))
error = 0;
rel_priv:
locks_release_private(&file_lock);
out:
return error;
}
/**
* vfs_lock_file - file byte range lock
* @filp: The file to apply the lock to
* @cmd: type of locking operation (F_SETLK, F_GETLK, etc.)
* @fl: The lock to be applied
* @conf: Place to return a copy of the conflicting lock, if found.
*
* A caller that doesn't care about the conflicting lock may pass NULL
* as the final argument.
*
* If the filesystem defines a private ->lock() method, then @conf will
* be left unchanged; so a caller that cares should initialize it to
* some acceptable default.
*
* To avoid blocking kernel daemons, such as lockd, that need to acquire POSIX
* locks, the ->lock() interface may return asynchronously, before the lock has
* been granted or denied by the underlying filesystem, if (and only if)
* lm_grant is set. Callers expecting ->lock() to return asynchronously
* will only use F_SETLK, not F_SETLKW; they will set FL_SLEEP if (and only if)
* the request is for a blocking lock. When ->lock() does return asynchronously,
* it must return FILE_LOCK_DEFERRED, and call ->lm_grant() when the lock
* request completes.
* If the request is for non-blocking lock the file system should return
* FILE_LOCK_DEFERRED then try to get the lock and call the callback routine
* with the result. If the request timed out the callback routine will return a
* nonzero return code and the file system should release the lock. The file
* system is also responsible to keep a corresponding posix lock when it
* grants a lock so the VFS can find out which locks are locally held and do
* the correct lock cleanup when required.
* The underlying filesystem must not drop the kernel lock or call
* ->lm_grant() before returning to the caller with a FILE_LOCK_DEFERRED
* return code.
*/
int vfs_lock_file(struct file *filp, unsigned int cmd, struct file_lock *fl, struct file_lock *conf)
{
if (filp->f_op->lock && is_remote_lock(filp))
return filp->f_op->lock(filp, cmd, fl);
else
return posix_lock_file(filp, fl, conf);
}
EXPORT_SYMBOL_GPL(vfs_lock_file);
static int do_lock_file_wait(struct file *filp, unsigned int cmd,
struct file_lock *fl)
{
int error;
error = security_file_lock(filp, fl->fl_type);
if (error)
return error;
for (;;) {
error = vfs_lock_file(filp, cmd, fl, NULL);
if (error != FILE_LOCK_DEFERRED)
break;
error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
if (!error)
continue;
locks_delete_block(fl);
break;
}
return error;
}
/* Ensure that fl->fl_file has compatible f_mode for F_SETLK calls */
static int
check_fmode_for_setlk(struct file_lock *fl)
{
switch (fl->fl_type) {
case F_RDLCK:
if (!(fl->fl_file->f_mode & FMODE_READ))
return -EBADF;
break;
case F_WRLCK:
if (!(fl->fl_file->f_mode & FMODE_WRITE))
return -EBADF;
}
return 0;
}
/* Apply the lock described by l to an open file descriptor.
* This implements both the F_SETLK and F_SETLKW commands of fcntl().
*/
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
int fcntl_setlk(unsigned int fd, struct file *filp, unsigned int cmd,
struct flock __user *l)
{
struct file_lock *file_lock = locks_alloc_lock();
struct flock flock;
struct inode *inode;
struct file *f;
int error;
if (file_lock == NULL)
return -ENOLCK;
inode = locks_inode(filp);
/*
* This might block, so we do it before checking the inode.
*/
error = -EFAULT;
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
/* Don't allow mandatory locks on files that may be memory mapped
* and shared.
*/
if (mandatory_lock(inode) && mapping_writably_mapped(filp->f_mapping)) {
error = -EAGAIN;
goto out;
}
error = flock_to_posix_lock(filp, file_lock, &flock);
if (error)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
error = check_fmode_for_setlk(file_lock);
if (error)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
/*
* If the cmd is requesting file-private locks, then set the
* FL_OFDLCK flag and override the owner.
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
*/
switch (cmd) {
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLK:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_SETLK;
file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
break;
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLKW:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_SETLKW;
file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
/* Fallthrough */
case F_SETLKW:
file_lock->fl_flags |= FL_SLEEP;
}
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
error = do_lock_file_wait(filp, cmd, file_lock);
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
/*
* Attempt to detect a close/fcntl race and recover by releasing the
* lock that was just acquired. There is no need to do that when we're
* unlocking though, or for OFD locks.
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
*/
if (!error && file_lock->fl_type != F_UNLCK &&
!(file_lock->fl_flags & FL_OFDLCK)) {
/*
* We need that spin_lock here - it prevents reordering between
* update of i_flctx->flc_posix and check for it done in
* close(). rcu_read_lock() wouldn't do.
*/
spin_lock(&current->files->file_lock);
f = fcheck(fd);
spin_unlock(&current->files->file_lock);
if (f != filp) {
file_lock->fl_type = F_UNLCK;
error = do_lock_file_wait(filp, cmd, file_lock);
WARN_ON_ONCE(error);
error = -EBADF;
}
}
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
out:
trace_fcntl_setlk(inode, file_lock, error);
locks_free_lock(file_lock);
return error;
}
#if BITS_PER_LONG == 32
/* Report the first existing lock that would conflict with l.
* This implements the F_GETLK command of fcntl().
*/
int fcntl_getlk64(struct file *filp, unsigned int cmd, struct flock64 __user *l)
{
struct file_lock file_lock;
struct flock64 flock;
int error;
error = -EFAULT;
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
error = -EINVAL;
if ((flock.l_type != F_RDLCK) && (flock.l_type != F_WRLCK))
goto out;
error = flock64_to_posix_lock(filp, &file_lock, &flock);
if (error)
goto out;
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
if (cmd == F_OFD_GETLK) {
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_GETLK64;
file_lock.fl_flags |= FL_OFDLCK;
file_lock.fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
}
error = vfs_test_lock(filp, &file_lock);
if (error)
goto out;
flock.l_type = file_lock.fl_type;
if (file_lock.fl_type != F_UNLCK)
posix_lock_to_flock64(&flock, &file_lock);
error = -EFAULT;
if (!copy_to_user(l, &flock, sizeof(flock)))
error = 0;
locks_release_private(&file_lock);
out:
return error;
}
/* Apply the lock described by l to an open file descriptor.
* This implements both the F_SETLK and F_SETLKW commands of fcntl().
*/
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
int fcntl_setlk64(unsigned int fd, struct file *filp, unsigned int cmd,
struct flock64 __user *l)
{
struct file_lock *file_lock = locks_alloc_lock();
struct flock64 flock;
struct inode *inode;
struct file *f;
int error;
if (file_lock == NULL)
return -ENOLCK;
/*
* This might block, so we do it before checking the inode.
*/
error = -EFAULT;
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
inode = locks_inode(filp);
/* Don't allow mandatory locks on files that may be memory mapped
* and shared.
*/
if (mandatory_lock(inode) && mapping_writably_mapped(filp->f_mapping)) {
error = -EAGAIN;
goto out;
}
error = flock64_to_posix_lock(filp, file_lock, &flock);
if (error)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
error = check_fmode_for_setlk(file_lock);
if (error)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
/*
* If the cmd is requesting file-private locks, then set the
* FL_OFDLCK flag and override the owner.
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
*/
switch (cmd) {
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLK:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_SETLK64;
file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
break;
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLKW:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
cmd = F_SETLKW64;
file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = filp;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
/* Fallthrough */
case F_SETLKW64:
file_lock->fl_flags |= FL_SLEEP;
}
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
error = do_lock_file_wait(filp, cmd, file_lock);
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
/*
* Attempt to detect a close/fcntl race and recover by releasing the
* lock that was just acquired. There is no need to do that when we're
* unlocking though, or for OFD locks.
[PATCH] stale POSIX lock handling I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 01:45:09 +07:00
*/
if (!error && file_lock->fl_type != F_UNLCK &&
!(file_lock->fl_flags & FL_OFDLCK)) {
/*
* We need that spin_lock here - it prevents reordering between
* update of i_flctx->flc_posix and check for it done in
* close(). rcu_read_lock() wouldn't do.
*/
spin_lock(&current->files->file_lock);
f = fcheck(fd);
spin_unlock(&current->files->file_lock);
if (f != filp) {
file_lock->fl_type = F_UNLCK;
error = do_lock_file_wait(filp, cmd, file_lock);
WARN_ON_ONCE(error);
error = -EBADF;
}
}
out:
locks_free_lock(file_lock);
return error;
}
#endif /* BITS_PER_LONG == 32 */
/*
* This function is called when the file is being removed
* from the task's fd array. POSIX locks belonging to this task
* are deleted at this time.
*/
void locks_remove_posix(struct file *filp, fl_owner_t owner)
{
int error;
struct inode *inode = locks_inode(filp);
struct file_lock lock;
struct file_lock_context *ctx;
/*
* If there are no locks held on this file, we don't need to call
* posix_lock_file(). Another process could be setting a lock on this
* file at the same time, but we wouldn't remove that lock anyway.
*/
ctx = smp_load_acquire(&inode->i_flctx);
if (!ctx || list_empty(&ctx->flc_posix))
return;
lock.fl_type = F_UNLCK;
lock.fl_flags = FL_POSIX | FL_CLOSE;
lock.fl_start = 0;
lock.fl_end = OFFSET_MAX;
lock.fl_owner = owner;
lock.fl_pid = current->tgid;
lock.fl_file = filp;
lock.fl_ops = NULL;
lock.fl_lmops = NULL;
error = vfs_lock_file(filp, F_SETLK, &lock, NULL);
if (lock.fl_ops && lock.fl_ops->fl_release_private)
lock.fl_ops->fl_release_private(&lock);
trace_locks_remove_posix(inode, &lock, error);
}
EXPORT_SYMBOL(locks_remove_posix);
/* The i_flctx must be valid when calling into here */
static void
locks_remove_flock(struct file *filp, struct file_lock_context *flctx)
{
struct file_lock fl = {
.fl_owner = filp,
.fl_pid = current->tgid,
.fl_file = filp,
.fl_flags = FL_FLOCK,
.fl_type = F_UNLCK,
.fl_end = OFFSET_MAX,
};
struct inode *inode = locks_inode(filp);
if (list_empty(&flctx->flc_flock))
return;
if (filp->f_op->flock && is_remote_lock(filp))
filp->f_op->flock(filp, F_SETLKW, &fl);
else
flock_lock_inode(inode, &fl);
if (fl.fl_ops && fl.fl_ops->fl_release_private)
fl.fl_ops->fl_release_private(&fl);
}
/* The i_flctx must be valid when calling into here */
static void
locks_remove_lease(struct file *filp, struct file_lock_context *ctx)
{
struct file_lock *fl, *tmp;
LIST_HEAD(dispose);
if (list_empty(&ctx->flc_lease))
return;
percpu_down_read_preempt_disable(&file_rwsem);
spin_lock(&ctx->flc_lock);
list_for_each_entry_safe(fl, tmp, &ctx->flc_lease, fl_list)
if (filp == fl->fl_file)
lease_modify(fl, F_UNLCK, &dispose);
spin_unlock(&ctx->flc_lock);
percpu_up_read_preempt_enable(&file_rwsem);
locks_dispose_list(&dispose);
}
/*
* This function is called on the last close of an open file.
*/
void locks_remove_file(struct file *filp)
{
struct file_lock_context *ctx;
ctx = smp_load_acquire(&locks_inode(filp)->i_flctx);
if (!ctx)
return;
/* remove any OFD locks */
locks_remove_posix(filp, filp);
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
/* remove flock locks */
locks_remove_flock(filp, ctx);
/* remove any leases */
locks_remove_lease(filp, ctx);
}
/**
* posix_unblock_lock - stop waiting for a file lock
* @waiter: the lock which was waiting
*
* lockd needs to block waiting for locks.
*/
int
posix_unblock_lock(struct file_lock *waiter)
{
int status = 0;
spin_lock(&blocked_lock_lock);
if (waiter->fl_next)
__locks_delete_block(waiter);
else
status = -ENOENT;
spin_unlock(&blocked_lock_lock);
return status;
}
EXPORT_SYMBOL(posix_unblock_lock);
/**
* vfs_cancel_lock - file byte range unblock lock
* @filp: The file to apply the unblock to
* @fl: The lock to be unblocked
*
* Used by lock managers to cancel blocked requests
*/
int vfs_cancel_lock(struct file *filp, struct file_lock *fl)
{
if (filp->f_op->lock && is_remote_lock(filp))
return filp->f_op->lock(filp, F_CANCELLK, fl);
return 0;
}
EXPORT_SYMBOL_GPL(vfs_cancel_lock);
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
struct locks_iterator {
int li_cpu;
loff_t li_pos;
};
static void lock_get_status(struct seq_file *f, struct file_lock *fl,
loff_t id, char *pfx)
{
struct inode *inode = NULL;
unsigned int fl_pid;
if (fl->fl_nspid) {
struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
/* Don't let fl_pid change based on who is reading the file */
fl_pid = pid_nr_ns(fl->fl_nspid, proc_pidns);
/*
* If there isn't a fl_pid don't display who is waiting on
* the lock if we are called from locks_show, or if we are
* called from __show_fd_info - skip lock entirely
*/
if (fl_pid == 0)
return;
} else
fl_pid = fl->fl_pid;
if (fl->fl_file != NULL)
inode = locks_inode(fl->fl_file);
seq_printf(f, "%lld:%s ", id, pfx);
if (IS_POSIX(fl)) {
if (fl->fl_flags & FL_ACCESS)
seq_puts(f, "ACCESS");
else if (IS_OFDLCK(fl))
seq_puts(f, "OFDLCK");
else
seq_puts(f, "POSIX ");
seq_printf(f, " %s ",
(inode == NULL) ? "*NOINODE*" :
mandatory_lock(inode) ? "MANDATORY" : "ADVISORY ");
} else if (IS_FLOCK(fl)) {
if (fl->fl_type & LOCK_MAND) {
seq_puts(f, "FLOCK MSNFS ");
} else {
seq_puts(f, "FLOCK ADVISORY ");
}
} else if (IS_LEASE(fl)) {
if (fl->fl_flags & FL_DELEG)
seq_puts(f, "DELEG ");
else
seq_puts(f, "LEASE ");
if (lease_breaking(fl))
seq_puts(f, "BREAKING ");
else if (fl->fl_file)
seq_puts(f, "ACTIVE ");
else
seq_puts(f, "BREAKER ");
} else {
seq_puts(f, "UNKNOWN UNKNOWN ");
}
if (fl->fl_type & LOCK_MAND) {
seq_printf(f, "%s ",
(fl->fl_type & LOCK_READ)
? (fl->fl_type & LOCK_WRITE) ? "RW " : "READ "
: (fl->fl_type & LOCK_WRITE) ? "WRITE" : "NONE ");
} else {
seq_printf(f, "%s ",
(lease_breaking(fl))
? (fl->fl_type == F_UNLCK) ? "UNLCK" : "READ "
: (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
}
if (inode) {
/* userspace relies on this representation of dev_t */
seq_printf(f, "%d %02x:%02x:%ld ", fl_pid,
MAJOR(inode->i_sb->s_dev),
MINOR(inode->i_sb->s_dev), inode->i_ino);
} else {
seq_printf(f, "%d <none>:0 ", fl_pid);
}
if (IS_POSIX(fl)) {
if (fl->fl_end == OFFSET_MAX)
seq_printf(f, "%Ld EOF\n", fl->fl_start);
else
seq_printf(f, "%Ld %Ld\n", fl->fl_start, fl->fl_end);
} else {
seq_puts(f, "0 EOF\n");
}
}
static int locks_show(struct seq_file *f, void *v)
{
struct locks_iterator *iter = f->private;
struct file_lock *fl, *bfl;
struct pid_namespace *proc_pidns = file_inode(f->file)->i_sb->s_fs_info;
fl = hlist_entry(v, struct file_lock, fl_link);
if (fl->fl_nspid && !pid_nr_ns(fl->fl_nspid, proc_pidns))
return 0;
lock_get_status(f, fl, iter->li_pos, "");
list_for_each_entry(bfl, &fl->fl_block, fl_block)
lock_get_status(f, bfl, iter->li_pos, " ->");
return 0;
}
proc: show locks in /proc/pid/fdinfo/X Let's show locks which are associated with a file descriptor in its fdinfo file. Currently we don't have a reliable way to determine who holds a lock. We can find some information in /proc/locks, but PID which is reported there can be wrong. For example, a process takes a lock, then forks a child and dies. In this case /proc/locks contains the parent pid, which can be reused by another process. $ cat /proc/locks ... 6: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF ... $ ps -C rpcbind PID TTY TIME CMD 332 ? 00:00:00 rpcbind $ cat /proc/332/fdinfo/4 pos: 0 flags: 0100000 mnt_id: 22 lock: 1: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF $ ls -l /proc/332/fd/4 lr-x------ 1 root root 64 Mar 5 14:43 /proc/332/fd/4 -> /run/rpcbind.lock $ ls -l /proc/324/fd/ total 0 lrwx------ 1 root root 64 Feb 27 14:50 0 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:50 1 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:49 2 -> /dev/pts/0 You can see that the process with the 324 pid doesn't hold the lock. This information is required for proper dumping and restoring file locks. Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Layton <jlayton@poochiereds.net> Acked-by: "J. Bruce Fields" <bfields@fieldses.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 02:49:38 +07:00
static void __show_fd_locks(struct seq_file *f,
struct list_head *head, int *id,
struct file *filp, struct files_struct *files)
{
struct file_lock *fl;
list_for_each_entry(fl, head, fl_list) {
if (filp != fl->fl_file)
continue;
if (fl->fl_owner != files &&
fl->fl_owner != filp)
continue;
(*id)++;
seq_puts(f, "lock:\t");
lock_get_status(f, fl, *id, "");
}
}
void show_fd_locks(struct seq_file *f,
struct file *filp, struct files_struct *files)
{
struct inode *inode = locks_inode(filp);
proc: show locks in /proc/pid/fdinfo/X Let's show locks which are associated with a file descriptor in its fdinfo file. Currently we don't have a reliable way to determine who holds a lock. We can find some information in /proc/locks, but PID which is reported there can be wrong. For example, a process takes a lock, then forks a child and dies. In this case /proc/locks contains the parent pid, which can be reused by another process. $ cat /proc/locks ... 6: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF ... $ ps -C rpcbind PID TTY TIME CMD 332 ? 00:00:00 rpcbind $ cat /proc/332/fdinfo/4 pos: 0 flags: 0100000 mnt_id: 22 lock: 1: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF $ ls -l /proc/332/fd/4 lr-x------ 1 root root 64 Mar 5 14:43 /proc/332/fd/4 -> /run/rpcbind.lock $ ls -l /proc/324/fd/ total 0 lrwx------ 1 root root 64 Feb 27 14:50 0 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:50 1 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:49 2 -> /dev/pts/0 You can see that the process with the 324 pid doesn't hold the lock. This information is required for proper dumping and restoring file locks. Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Layton <jlayton@poochiereds.net> Acked-by: "J. Bruce Fields" <bfields@fieldses.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 02:49:38 +07:00
struct file_lock_context *ctx;
int id = 0;
ctx = smp_load_acquire(&inode->i_flctx);
proc: show locks in /proc/pid/fdinfo/X Let's show locks which are associated with a file descriptor in its fdinfo file. Currently we don't have a reliable way to determine who holds a lock. We can find some information in /proc/locks, but PID which is reported there can be wrong. For example, a process takes a lock, then forks a child and dies. In this case /proc/locks contains the parent pid, which can be reused by another process. $ cat /proc/locks ... 6: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF ... $ ps -C rpcbind PID TTY TIME CMD 332 ? 00:00:00 rpcbind $ cat /proc/332/fdinfo/4 pos: 0 flags: 0100000 mnt_id: 22 lock: 1: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF $ ls -l /proc/332/fd/4 lr-x------ 1 root root 64 Mar 5 14:43 /proc/332/fd/4 -> /run/rpcbind.lock $ ls -l /proc/324/fd/ total 0 lrwx------ 1 root root 64 Feb 27 14:50 0 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:50 1 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:49 2 -> /dev/pts/0 You can see that the process with the 324 pid doesn't hold the lock. This information is required for proper dumping and restoring file locks. Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Layton <jlayton@poochiereds.net> Acked-by: "J. Bruce Fields" <bfields@fieldses.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 02:49:38 +07:00
if (!ctx)
return;
spin_lock(&ctx->flc_lock);
__show_fd_locks(f, &ctx->flc_flock, &id, filp, files);
__show_fd_locks(f, &ctx->flc_posix, &id, filp, files);
__show_fd_locks(f, &ctx->flc_lease, &id, filp, files);
spin_unlock(&ctx->flc_lock);
}
static void *locks_start(struct seq_file *f, loff_t *pos)
__acquires(&blocked_lock_lock)
{
struct locks_iterator *iter = f->private;
iter->li_pos = *pos + 1;
percpu_down_write(&file_rwsem);
spin_lock(&blocked_lock_lock);
return seq_hlist_start_percpu(&file_lock_list.hlist, &iter->li_cpu, *pos);
}
static void *locks_next(struct seq_file *f, void *v, loff_t *pos)
{
struct locks_iterator *iter = f->private;
++iter->li_pos;
return seq_hlist_next_percpu(v, &file_lock_list.hlist, &iter->li_cpu, pos);
}
static void locks_stop(struct seq_file *f, void *v)
__releases(&blocked_lock_lock)
{
spin_unlock(&blocked_lock_lock);
percpu_up_write(&file_rwsem);
}
static const struct seq_operations locks_seq_operations = {
.start = locks_start,
.next = locks_next,
.stop = locks_stop,
.show = locks_show,
};
static int locks_open(struct inode *inode, struct file *filp)
{
return seq_open_private(filp, &locks_seq_operations,
sizeof(struct locks_iterator));
}
static const struct file_operations proc_locks_operations = {
.open = locks_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release_private,
};
static int __init proc_locks_init(void)
{
proc_create("locks", 0, NULL, &proc_locks_operations);
return 0;
}
fs_initcall(proc_locks_init);
#endif
static int __init filelock_init(void)
{
int i;
flctx_cache = kmem_cache_create("file_lock_ctx",
sizeof(struct file_lock_context), 0, SLAB_PANIC, NULL);
filelock_cache = kmem_cache_create("file_lock_cache",
sizeof(struct file_lock), 0, SLAB_PANIC, NULL);
for_each_possible_cpu(i) {
struct file_lock_list_struct *fll = per_cpu_ptr(&file_lock_list, i);
spin_lock_init(&fll->lock);
INIT_HLIST_HEAD(&fll->hlist);
}
return 0;
}
core_initcall(filelock_init);