linux_dsm_epyc7002/include/asm-powerpc/pci.h

244 lines
6.7 KiB
C
Raw Normal View History

#ifndef __ASM_POWERPC_PCI_H
#define __ASM_POWERPC_PCI_H
#ifdef __KERNEL__
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <asm/machdep.h>
#include <asm/scatterlist.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
struct pci_dev;
/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
/*
* Set this to 1 if you want the kernel to re-assign all PCI
* bus numbers
*/
extern int pci_assign_all_buses;
#define pcibios_assign_all_busses() (pci_assign_all_buses)
#define pcibios_scan_all_fns(a, b) 0
static inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
if (ppc_md.pci_get_legacy_ide_irq)
return ppc_md.pci_get_legacy_ide_irq(dev, channel);
return channel ? 15 : 14;
}
#ifdef CONFIG_PPC64
/*
* We want to avoid touching the cacheline size or MWI bit.
* pSeries firmware sets the cacheline size (which is not the cpu cacheline
* size in all cases) and hardware treats MWI the same as memory write.
*/
#define PCI_DISABLE_MWI
extern struct dma_mapping_ops pci_dma_ops;
/* For DAC DMA, we currently don't support it by default, but
* we let 64-bit platforms override this.
*/
static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask)
{
if (pci_dma_ops.dac_dma_supported)
return pci_dma_ops.dac_dma_supported(&hwdev->dev, mask);
return 0;
}
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
unsigned long cacheline_size;
u8 byte;
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
if (byte == 0)
cacheline_size = 1024;
else
cacheline_size = (int) byte * 4;
*strat = PCI_DMA_BURST_MULTIPLE;
*strategy_parameter = cacheline_size;
}
#endif
extern int pci_domain_nr(struct pci_bus *bus);
/* Decide whether to display the domain number in /proc */
extern int pci_proc_domain(struct pci_bus *bus);
#else /* 32-bit */
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
/*
* At present there are very few 32-bit PPC machines that can have
* memory above the 4GB point, and we don't support that.
*/
#define pci_dac_dma_supported(pci_dev, mask) (0)
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
/* Set the name of the bus as it appears in /proc/bus/pci */
static inline int pci_proc_domain(struct pci_bus *bus)
{
return 0;
}
#endif /* CONFIG_PPC64 */
struct vm_area_struct;
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
#ifdef CONFIG_PPC64
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) \
((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) \
((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
/* The PCI address space does not equal the physical memory address
* space (we have an IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS (0)
#else /* 32-bit */
/* The PCI address space does equal the physical memory
* address space (no IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS (1)
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif /* CONFIG_PPC64 */
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region,
struct resource *res);
extern void pcibios_bus_to_resource(struct pci_dev *dev,
struct resource *res,
struct pci_bus_region *region);
static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
struct resource *res)
[PATCH] Make sparc64 use setup-res.c There were three changes necessary in order to allow sparc64 to use setup-res.c: 1) Sparc64 roots the PCI I/O and MEM address space using parent resources contained in the PCI controller structure. I'm actually surprised no other platforms do this, especially ones like Alpha and PPC{,64}. These resources get linked into the iomem/ioport tree when PCI controllers are probed. So the hierarchy looks like this: iomem --| PCI controller 1 MEM space --| device 1 device 2 etc. PCI controller 2 MEM space --| ... ioport --| PCI controller 1 IO space --| ... PCI controller 2 IO space --| ... You get the idea. The drivers/pci/setup-res.c code allocates using plain iomem_space and ioport_space as the root, so that wouldn't work with the above setup. So I added a pcibios_select_root() that is used to handle this. It uses the PCI controller struct's io_space and mem_space on sparc64, and io{port,mem}_resource on every other platform to keep current behavior. 2) quirk_io_region() is buggy. It takes in raw BUS view addresses and tries to use them as a PCI resource. pci_claim_resource() expects the resource to be fully formed when it gets called. The sparc64 implementation would do the translation but that's absolutely wrong, because if the same resource gets released then re-claimed we'll adjust things twice. So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource() conversion before passing it on to pci_claim_resource(). 3) I was mistakedly __init'ing the function methods the PCI controller drivers provide on sparc64 to implement some parts of these routines. This was, of course, easy to fix. So we end up with the following, and that nasty SPARC64 makefile ifdef in drivers/pci/Makefile is finally zapped. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-09 03:19:08 +07:00
{
struct resource *root = NULL;
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
return root;
}
extern int unmap_bus_range(struct pci_bus *bus);
extern int remap_bus_range(struct pci_bus *bus);
extern void pcibios_fixup_device_resources(struct pci_dev *dev,
struct pci_bus *bus);
extern void pcibios_claim_one_bus(struct pci_bus *b);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
extern struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn);
extern void of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev);
extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
extern int pci_read_irq_line(struct pci_dev *dev);
extern void pcibios_add_platform_entries(struct pci_dev *dev);
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
unsigned long size,
pgprot_t prot);
#if defined(CONFIG_PPC_MULTIPLATFORM) || defined(CONFIG_PPC32)
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end);
#endif /* CONFIG_PPC_MULTIPLATFORM || CONFIG_PPC32 */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */