AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 11:58:21 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
eccbb5e7ee
linux_dsm_epyc7002/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts

428 lines
9.3 KiB
Plaintext
Raw Normal View History

ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 16:37:52 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* Digi International's ConnectCore6UL SBC Pro board device tree source
*
* Copyright 2018 Digi International, Inc.
*
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6ul.dtsi"
#include "imx6ul-ccimx6ulsom.dtsi"
/ {
model = "Digi International ConnectCore 6UL SBC Pro.";
compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
lcd_backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm5 0 50000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-25 22:09:31 +07:00
panel {
compatible = "auo,g101evn010", "simple-panel";
power-supply = <&ldo4_ext>;
backlight = <&lcd_backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 16:37:52 +07:00
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc1>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&ext_3v3>;
status = "okay";
};
/* CAN2 is multiplexed with UART2 RTS/CTS */
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&ext_3v3>;
status = "disabled";
};
&ecspi1 {
cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_master>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
status = "okay";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
phy-reset-duration = <26>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
smsc,disable-energy-detect;
reg = <0>;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
smsc,disable-energy-detect;
reg = <1>;
};
};
};
&gpio5 {
emmc-usd-mux {
gpio-hog;
gpios = <1 GPIO_ACTIVE_LOW>;
output-high;
};
};
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-25 22:09:33 +07:00
&i2c1 {
touchscreen@14 {
compatible = "goodix,gt911";
reg = <0x14>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_goodix_touch>;
interrupt-parent = <&gpio5>;
interrupts = <2 IRQ_TYPE_EDGE_RISING>;
irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 16:37:52 +07:00
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat0_17
&pinctrl_lcdif_clken
&pinctrl_lcdif_hvsync>;
lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
status = "okay";
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-25 22:09:31 +07:00
port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 16:37:52 +07:00
};
&ldo4_ext {
regulator-max-microvolt = <1800000>;
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
status = "okay";
};
&pwm6 {
status = "okay";
};
&pwm7 {
status = "okay";
};
&pwm8 {
status = "okay";
};
&sai2 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_sai2>;
pinctrl-1 = <&pinctrl_sai2_sleep>;
assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
<&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
<&clks IMX6UL_CLK_SAI2>;
assigned-clock-rates = <0>, <786432000>, <12288000>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
status = "okay";
};
/* UART2 RTS/CTS muxed with CAN2 */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_4wires>;
uart-has-rtscts;
status = "okay";
};
/* UART3 RTS/CTS muxed with CAN 1 */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_2wires>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
};
&usbotg1 {
dr_mode = "otg";
vbus-supply = <&reg_usb_otg1_vbus>;
pinctrl-0 = <&pinctrl_usbotg1>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
/* USDHC2 (microSD conflicts with eMMC) */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
no-1-8-v;
broken-cd; /* no carrier detect line (use polling) */
status = "okay";
};
&iomuxc {
pinctrl_adc1: adc1grp {
fsl,pins = <
/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
>;
};
pinctrl_ecspi1_master: ecspi1grp1 {
fsl,pins = <
MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0
MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0
MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0
MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051
>;
};
pinctrl_enet2_mdio: mdioenet2grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp{
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
>;
};
pinctrl_flexcan2: flexcan2grp{
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
>;
};
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-25 22:09:33 +07:00
pinctrl_goodix_touch: goodixgrp{
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
>;
};
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 16:37:52 +07:00
pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
>;
};
pinctrl_lcdif_clken: lcdifctrlgrp1 {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
>;
};
pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
fsl,pins = <
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
>;
};
pinctrl_pwm5: pwm5grp {
fsl,pins = <
MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
/* Interrupt */
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0
>;
};
pinctrl_sai2_sleep: sai2grp-sleep {
fsl,pins = <
MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000
MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000
MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000
MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000
/* Interrupt */
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000
>;
};
pinctrl_uart2_4wires: uart2grp-4wires {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
>;
};
pinctrl_uart3_2wires: uart3grp-2wires {
fsl,pins = <
MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039
MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
/* Mux selector between eMMC/SD# */
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059
MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059
>;
};
};
Reference in New Issue Copy Permalink