AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 06:06:47 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ec0b380245
linux_dsm_epyc7002/arch/arm/boot/dts/twl4030.dtsi

107 lines
2.1 KiB
Plaintext
Raw Normal View History

arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC Add a dedicated DTS file for the twl4030/5030 Power + Audio IC. This chip is a big SoC that will be reused in a lot of various OMAP3 boards. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2011-12-15 21:47:41 +07:00
/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Integrated Power Management Chip
*/
&twl {
compatible = "ti,twl4030";
interrupt-controller;
#interrupt-cells = <1>;
rtc {
compatible = "ti,twl4030-rtc";
interrupts = <11>;
};
arm/dts: twl: Pass regulator data from dt Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-09 06:50:12 +07:00
twl4030_charger: Add devicetree support This allows the charger to be enabled with devicetree, and allows the parameters for charging the backup battery to be set. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Kumar Gala <galak@codeaurora.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-31 13:05:50 +07:00
charger: bci {
compatible = "ti,twl4030-bci";
interrupts = <9>, <2>;
bci3v1-supply = <&vusb3v1>;
};
watchdog: twl4030_wdt: add DT support Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-24 03:03:37 +07:00
watchdog {
compatible = "ti,twl4030-wdt";
};
ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU Define VDD1 regulator in twl4030 DT and mark it as the supply for the various OMAP34xx/35xx/36xx/37xx platforms (all use TWL4030 variants with VDD1 supplying the CPU). NOTE: This currently will use I2C1 bus communication path to set the voltage in device tree boot. In the legacy non device tree boot, we continue to use twl-common.c which bypasses I2C1 bus communication path and uses I2C4 bus path using OMAP voltage libraries. We should eventually be able to use I2C4 path once we have voltage regulator for OMAP which is capable of using the voltage controller/voltage processor IP blocks. Signed-off-by: Nishanth Menon <nm@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-20 00:53:05 +07:00
vcc: regulator-vdd1 {
compatible = "ti,twl4030-vdd1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1450000>;
};
arm/dts: Cleanup regulator naming and remove @0,1 regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-30 20:12:20 +07:00
vdac: regulator-vdac {
arm/dts: twl: Pass regulator data from dt Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-09 06:50:12 +07:00
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
arm/dts: Cleanup regulator naming and remove @0,1 regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-30 20:12:20 +07:00
vpll2: regulator-vpll2 {
arm/dts: twl: Pass regulator data from dt Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-09 06:50:12 +07:00
compatible = "ti,twl4030-vpll2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
arm/dts: Cleanup regulator naming and remove @0,1 regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-30 20:12:20 +07:00
vmmc1: regulator-vmmc1 {
arm/dts: twl: Pass regulator data from dt Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-09 06:50:12 +07:00
compatible = "ti,twl4030-vmmc1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
arm/dts: twl4030: Add twl4030-gpio node Add the twl-gpio node inside twl4030 definition. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-08 23:37:25 +07:00
ARM: dts: Add missing vmmc2 regulator for twl For some reason vmmc2 regulator is missing for twl. Let's add it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-08 05:01:58 +07:00
vmmc2: regulator-vmmc2 {
compatible = "ti,twl4030-vmmc2";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
ARM: dts: Add twl4030-usb data Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-19 16:32:07 +07:00
vusb1v5: regulator-vusb1v5 {
compatible = "ti,twl4030-vusb1v5";
};
vusb1v8: regulator-vusb1v8 {
compatible = "ti,twl4030-vusb1v8";
};
vusb3v1: regulator-vusb3v1 {
compatible = "ti,twl4030-vusb3v1";
};
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-11 23:01:59 +07:00
vsim: regulator-vsim {
compatible = "ti,twl4030-vsim";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
arm/dts: twl4030: Add twl4030-gpio node Add the twl-gpio node inside twl4030 definition. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-08 23:37:25 +07:00
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
ARM: dts: Add twl4030-usb data Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-19 16:32:07 +07:00
ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards Add usb otg data node in omap4/omap3 device tree file. Also update the node with board specific setting in omapx-<board>.dts file. The dt data specifies among others the interface type (ULPI or UTMI), mode which is mostly OTG, power that specifies the amount of power this can supply when in host mode. The information about usb otg node is available @ Documentation/devicetree/bindings/usb/omap-usb.txt Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-07 20:35:16 +07:00
usb2_phy: twl4030-usb {
ARM: dts: Add twl4030-usb data Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-19 16:32:07 +07:00
compatible = "ti,twl4030-usb";
interrupts = <10>, <4>;
usb1v5-supply = <&vusb1v5>;
usb1v8-supply = <&vusb1v8>;
usb3v1-supply = <&vusb3v1>;
usb_mode = <1>;
};
ARM: dts: twl4030: Add PWM support Enable support for the PWMs and LEDs as PWM drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-11-07 21:05:00 +07:00
twl_pwm: pwm {
compatible = "ti,twl4030-pwm";
#pwm-cells = <2>;
};
twl_pwmled: pwmled {
compatible = "ti,twl4030-pwmled";
#pwm-cells = <2>;
};
arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC Add a dedicated DTS file for the twl4030/5030 Power + Audio IC. This chip is a big SoC that will be reused in a lot of various OMAP3 boards. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2011-12-15 21:47:41 +07:00
};
Reference in New Issue Copy Permalink