2014-07-09 08:08:52 +07:00
|
|
|
/*
|
|
|
|
* xHCI host controller driver for R-Car SoCs
|
|
|
|
*
|
|
|
|
* Copyright (C) 2014 Renesas Electronics Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* version 2 as published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/firmware.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
2016-04-22 17:17:12 +07:00
|
|
|
#include <linux/of.h>
|
2014-07-09 08:08:52 +07:00
|
|
|
#include <linux/usb/phy.h>
|
|
|
|
|
|
|
|
#include "xhci.h"
|
2015-11-24 18:09:51 +07:00
|
|
|
#include "xhci-plat.h"
|
2014-07-09 08:08:52 +07:00
|
|
|
#include "xhci-rcar.h"
|
|
|
|
|
2015-11-24 18:09:53 +07:00
|
|
|
/*
|
2016-11-11 20:13:26 +07:00
|
|
|
* - The V3 firmware is for r8a7796 (with good performance).
|
|
|
|
* - The V2 firmware can be used on both r8a7795 (es1.x) and r8a7796.
|
2015-11-24 18:09:53 +07:00
|
|
|
* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
|
|
|
|
* performance degradation. So, this driver continues to use the V1 if R-Car
|
|
|
|
* Gen2.
|
|
|
|
* - The V1 firmware is impossible to use on R-Car Gen3.
|
|
|
|
*/
|
2015-11-24 18:09:51 +07:00
|
|
|
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);
|
2015-11-24 18:09:53 +07:00
|
|
|
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);
|
2016-11-11 20:13:26 +07:00
|
|
|
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
|
2014-07-09 08:08:52 +07:00
|
|
|
|
|
|
|
/*** Register Offset ***/
|
|
|
|
#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */
|
|
|
|
#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */
|
|
|
|
#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */
|
|
|
|
|
|
|
|
#define RCAR_USB3_LCLK 0xa44 /* LCLK Select */
|
|
|
|
#define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */
|
|
|
|
#define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */
|
|
|
|
#define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */
|
|
|
|
#define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */
|
|
|
|
#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */
|
|
|
|
|
|
|
|
/*** Register Settings ***/
|
|
|
|
/* Interrupt Enable */
|
|
|
|
#define RCAR_USB3_INT_XHC_ENA 0x00000001
|
|
|
|
#define RCAR_USB3_INT_PME_ENA 0x00000002
|
|
|
|
#define RCAR_USB3_INT_HSE_ENA 0x00000004
|
|
|
|
#define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \
|
|
|
|
RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA)
|
|
|
|
|
|
|
|
/* FW Download Control & Status */
|
|
|
|
#define RCAR_USB3_DL_CTRL_ENABLE 0x00000001
|
|
|
|
#define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010
|
|
|
|
#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100
|
|
|
|
|
|
|
|
/* LCLK Select */
|
|
|
|
#define RCAR_USB3_LCLK_ENA_VAL 0x01030001
|
|
|
|
|
|
|
|
/* USB3.0 Configuration */
|
|
|
|
#define RCAR_USB3_CONF1_VAL 0x00030204
|
|
|
|
#define RCAR_USB3_CONF2_VAL 0x00030300
|
|
|
|
#define RCAR_USB3_CONF3_VAL 0x13802007
|
|
|
|
|
|
|
|
/* USB3.0 Polarity */
|
|
|
|
#define RCAR_USB3_RX_POL_VAL BIT(21)
|
|
|
|
#define RCAR_USB3_TX_POL_VAL BIT(4)
|
|
|
|
|
2015-11-24 18:09:51 +07:00
|
|
|
static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
|
|
|
|
{
|
|
|
|
/* LCLK Select */
|
|
|
|
writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
|
|
|
|
/* USB3.0 Configuration */
|
|
|
|
writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
|
|
|
|
writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
|
|
|
|
writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
|
|
|
|
/* USB3.0 Polarity */
|
|
|
|
writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
|
|
|
|
writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
|
|
|
|
}
|
|
|
|
|
2016-04-22 17:17:12 +07:00
|
|
|
static int xhci_rcar_is_gen2(struct device *dev)
|
|
|
|
{
|
|
|
|
struct device_node *node = dev->of_node;
|
|
|
|
|
|
|
|
return of_device_is_compatible(node, "renesas,xhci-r8a7790") ||
|
|
|
|
of_device_is_compatible(node, "renesas,xhci-r8a7791") ||
|
|
|
|
of_device_is_compatible(node, "renesas,xhci-r8a7793") ||
|
|
|
|
of_device_is_compatible(node, "renensas,rcar-gen2-xhci");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xhci_rcar_is_gen3(struct device *dev)
|
|
|
|
{
|
|
|
|
struct device_node *node = dev->of_node;
|
|
|
|
|
|
|
|
return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
|
2016-11-11 20:13:27 +07:00
|
|
|
of_device_is_compatible(node, "renesas,xhci-r8a7796") ||
|
2016-04-22 17:17:12 +07:00
|
|
|
of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
|
|
|
|
}
|
|
|
|
|
2014-07-09 08:08:52 +07:00
|
|
|
void xhci_rcar_start(struct usb_hcd *hcd)
|
|
|
|
{
|
|
|
|
u32 temp;
|
|
|
|
|
|
|
|
if (hcd->regs != NULL) {
|
|
|
|
/* Interrupt Enable */
|
|
|
|
temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
|
|
|
|
temp |= RCAR_USB3_INT_ENA_VAL;
|
|
|
|
writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
|
2016-04-22 17:17:12 +07:00
|
|
|
if (xhci_rcar_is_gen2(hcd->self.controller))
|
2015-11-24 18:09:51 +07:00
|
|
|
xhci_rcar_start_gen2(hcd);
|
2014-07-09 08:08:52 +07:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-11-24 18:09:51 +07:00
|
|
|
static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
|
2014-07-09 08:08:52 +07:00
|
|
|
{
|
2015-11-24 18:09:51 +07:00
|
|
|
struct device *dev = hcd->self.controller;
|
|
|
|
void __iomem *regs = hcd->regs;
|
|
|
|
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
|
2014-07-09 08:08:52 +07:00
|
|
|
const struct firmware *fw;
|
|
|
|
int retval, index, j, time;
|
|
|
|
int timeout = 10000;
|
|
|
|
u32 data, val, temp;
|
|
|
|
|
|
|
|
/* request R-Car USB3.0 firmware */
|
2015-11-24 18:09:51 +07:00
|
|
|
retval = request_firmware(&fw, priv->firmware_name, dev);
|
2014-07-09 08:08:52 +07:00
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
/* download R-Car USB3.0 firmware */
|
|
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
|
|
temp |= RCAR_USB3_DL_CTRL_ENABLE;
|
|
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
|
|
|
|
for (index = 0; index < fw->size; index += 4) {
|
|
|
|
/* to avoid reading beyond the end of the buffer */
|
|
|
|
for (data = 0, j = 3; j >= 0; j--) {
|
|
|
|
if ((j + index) < fw->size)
|
|
|
|
data |= fw->data[index + j] << (8 * j);
|
|
|
|
}
|
|
|
|
writel(data, regs + RCAR_USB3_FW_DATA0);
|
|
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
|
|
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
|
|
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
|
|
|
|
for (time = 0; time < timeout; time++) {
|
|
|
|
val = readl(regs + RCAR_USB3_DL_CTRL);
|
|
|
|
if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
|
|
|
|
break;
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
if (time == timeout) {
|
|
|
|
retval = -ETIMEDOUT;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
|
|
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
|
|
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
|
|
|
|
for (time = 0; time < timeout; time++) {
|
|
|
|
val = readl(regs + RCAR_USB3_DL_CTRL);
|
|
|
|
if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
|
|
|
|
retval = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
if (time == timeout)
|
|
|
|
retval = -ETIMEDOUT;
|
|
|
|
|
|
|
|
release_firmware(fw);
|
|
|
|
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This function needs to initialize a "phy" of usb before */
|
|
|
|
int xhci_rcar_init_quirk(struct usb_hcd *hcd)
|
|
|
|
{
|
2016-04-22 17:17:12 +07:00
|
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
|
2014-07-09 08:08:52 +07:00
|
|
|
/* If hcd->regs is NULL, we don't just call the following function */
|
|
|
|
if (!hcd->regs)
|
|
|
|
return 0;
|
|
|
|
|
2016-04-22 17:17:12 +07:00
|
|
|
/*
|
|
|
|
* On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
|
|
|
|
* to 1. However, these SoCs don't support 64-bit address memory
|
|
|
|
* pointers. So, this driver clears the AC64 bit of xhci->hcc_params
|
|
|
|
* to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
|
|
|
|
* xhci_gen_setup().
|
|
|
|
*/
|
|
|
|
if (xhci_rcar_is_gen2(hcd->self.controller) ||
|
|
|
|
xhci_rcar_is_gen3(hcd->self.controller))
|
|
|
|
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
|
|
|
|
|
2015-11-24 18:09:51 +07:00
|
|
|
return xhci_rcar_download_firmware(hcd);
|
2014-07-09 08:08:52 +07:00
|
|
|
}
|
2017-04-19 20:55:48 +07:00
|
|
|
|
|
|
|
int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = xhci_rcar_download_firmware(hcd);
|
|
|
|
if (!ret)
|
|
|
|
xhci_rcar_start(hcd);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|