linux_dsm_epyc7002/drivers/net/hyperv/netvsc.c

1465 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2009, Microsoft Corporation.
*
* Authors:
* Haiyang Zhang <haiyangz@microsoft.com>
* Hank Janssen <hjanssen@microsoft.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/io.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h> Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so remove it from there and fix up the resulting build problems triggered on x86 {64|32}-bit {def|allmod|allno}configs. The breakages were triggering in places where x86 builds relied on vmalloc() facilities but did not include <linux/vmalloc.h> explicitly and relied on the implicit inclusion via <asm/io.h>. Also add: - <linux/init.h> to <linux/io.h> - <asm/pgtable_types> to <asm/io.h> ... which were two other implicit header file dependencies. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> [ Tidied up the changelog. ] Acked-by: David Miller <davem@davemloft.net> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-02 16:01:38 +07:00
#include <linux/vmalloc.h>
#include <linux/rtnetlink.h>
#include <linux/prefetch.h>
#include <asm/sync_bitops.h>
#include "hyperv_net.h"
#include "netvsc_trace.h"
/*
* Switch the data path from the synthetic interface to the VF
* interface.
*/
void netvsc_switch_datapath(struct net_device *ndev, bool vf)
{
hv_netvsc: untangle the pointer mess We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 18:55:22 +07:00
struct net_device_context *net_device_ctx = netdev_priv(ndev);
struct hv_device *dev = net_device_ctx->device_ctx;
struct netvsc_device *nv_dev = rtnl_dereference(net_device_ctx->nvdev);
struct nvsp_message *init_pkt = &nv_dev->channel_init_pkt;
memset(init_pkt, 0, sizeof(struct nvsp_message));
init_pkt->hdr.msg_type = NVSP_MSG4_TYPE_SWITCH_DATA_PATH;
if (vf)
init_pkt->msg.v4_msg.active_dp.active_datapath =
NVSP_DATAPATH_VF;
else
init_pkt->msg.v4_msg.active_dp.active_datapath =
NVSP_DATAPATH_SYNTHETIC;
trace_nvsp_send(ndev, init_pkt);
vmbus_sendpacket(dev->channel, init_pkt,
sizeof(struct nvsp_message),
(unsigned long)init_pkt,
VM_PKT_DATA_INBAND, 0);
}
/* Worker to setup sub channels on initial setup
* Initial hotplug event occurs in softirq context
* and can't wait for channels.
*/
static void netvsc_subchan_work(struct work_struct *w)
{
struct netvsc_device *nvdev =
container_of(w, struct netvsc_device, subchan_work);
struct rndis_device *rdev;
int i, ret;
/* Avoid deadlock with device removal already under RTNL */
if (!rtnl_trylock()) {
schedule_work(w);
return;
}
rdev = nvdev->extension;
if (rdev) {
ret = rndis_set_subchannel(rdev->ndev, nvdev, NULL);
if (ret == 0) {
netif_device_attach(rdev->ndev);
} else {
/* fallback to only primary channel */
for (i = 1; i < nvdev->num_chn; i++)
netif_napi_del(&nvdev->chan_table[i].napi);
nvdev->max_chn = 1;
nvdev->num_chn = 1;
}
}
rtnl_unlock();
}
static struct netvsc_device *alloc_net_device(void)
{
struct netvsc_device *net_device;
net_device = kzalloc(sizeof(struct netvsc_device), GFP_KERNEL);
if (!net_device)
return NULL;
init_waitqueue_head(&net_device->wait_drain);
net_device->destroy = false;
net_device->tx_disable = false;
net_device->max_pkt = RNDIS_MAX_PKT_DEFAULT;
net_device->pkt_align = RNDIS_PKT_ALIGN_DEFAULT;
init_completion(&net_device->channel_init_wait);
init_waitqueue_head(&net_device->subchan_open);
INIT_WORK(&net_device->subchan_work, netvsc_subchan_work);
return net_device;
}
static void free_netvsc_device(struct rcu_head *head)
{
struct netvsc_device *nvdev
= container_of(head, struct netvsc_device, rcu);
int i;
kfree(nvdev->extension);
vfree(nvdev->recv_buf);
vfree(nvdev->send_buf);
kfree(nvdev->send_section_map);
for (i = 0; i < VRSS_CHANNEL_MAX; i++) {
xdp_rxq_info_unreg(&nvdev->chan_table[i].xdp_rxq);
vfree(nvdev->chan_table[i].mrc.slots);
}
kfree(nvdev);
}
static void free_netvsc_device_rcu(struct netvsc_device *nvdev)
{
call_rcu(&nvdev->rcu, free_netvsc_device);
}
static void netvsc_revoke_recv_buf(struct hv_device *device,
struct netvsc_device *net_device,
struct net_device *ndev)
{
struct nvsp_message *revoke_packet;
int ret;
/*
* If we got a section count, it means we received a
* SendReceiveBufferComplete msg (ie sent
* NvspMessage1TypeSendReceiveBuffer msg) therefore, we need
* to send a revoke msg here
*/
if (net_device->recv_section_cnt) {
/* Send the revoke receive buffer */
revoke_packet = &net_device->revoke_packet;
memset(revoke_packet, 0, sizeof(struct nvsp_message));
revoke_packet->hdr.msg_type =
NVSP_MSG1_TYPE_REVOKE_RECV_BUF;
revoke_packet->msg.v1_msg.
revoke_recv_buf.id = NETVSC_RECEIVE_BUFFER_ID;
trace_nvsp_send(ndev, revoke_packet);
hv_netvsc: untangle the pointer mess We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 18:55:22 +07:00
ret = vmbus_sendpacket(device->channel,
revoke_packet,
sizeof(struct nvsp_message),
(unsigned long)revoke_packet,
VM_PKT_DATA_INBAND, 0);
/* If the failure is because the channel is rescinded;
* ignore the failure since we cannot send on a rescinded
* channel. This would allow us to properly cleanup
* even when the channel is rescinded.
*/
if (device->channel->rescind)
ret = 0;
/*
* If we failed here, we might as well return and
* have a leak rather than continue and a bugchk
*/
if (ret != 0) {
netdev_err(ndev, "unable to send "
"revoke receive buffer to netvsp\n");
return;
}
net_device->recv_section_cnt = 0;
}
}
static void netvsc_revoke_send_buf(struct hv_device *device,
struct netvsc_device *net_device,
struct net_device *ndev)
{
struct nvsp_message *revoke_packet;
int ret;
/* Deal with the send buffer we may have setup.
* If we got a send section size, it means we received a
* NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent
* NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need
* to send a revoke msg here
*/
if (net_device->send_section_cnt) {
/* Send the revoke receive buffer */
revoke_packet = &net_device->revoke_packet;
memset(revoke_packet, 0, sizeof(struct nvsp_message));
revoke_packet->hdr.msg_type =
NVSP_MSG1_TYPE_REVOKE_SEND_BUF;
revoke_packet->msg.v1_msg.revoke_send_buf.id =
NETVSC_SEND_BUFFER_ID;
trace_nvsp_send(ndev, revoke_packet);
hv_netvsc: untangle the pointer mess We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 18:55:22 +07:00
ret = vmbus_sendpacket(device->channel,
revoke_packet,
sizeof(struct nvsp_message),
(unsigned long)revoke_packet,
VM_PKT_DATA_INBAND, 0);
/* If the failure is because the channel is rescinded;
* ignore the failure since we cannot send on a rescinded
* channel. This would allow us to properly cleanup
* even when the channel is rescinded.
*/
if (device->channel->rescind)
ret = 0;
/* If we failed here, we might as well return and
* have a leak rather than continue and a bugchk
*/
if (ret != 0) {
netdev_err(ndev, "unable to send "
"revoke send buffer to netvsp\n");
return;
}
net_device->send_section_cnt = 0;
}
}
static void netvsc_teardown_recv_gpadl(struct hv_device *device,
struct netvsc_device *net_device,
struct net_device *ndev)
{
int ret;
if (net_device->recv_buf_gpadl_handle) {
ret = vmbus_teardown_gpadl(device->channel,
net_device->recv_buf_gpadl_handle);
/* If we failed here, we might as well return and have a leak
* rather than continue and a bugchk
*/
if (ret != 0) {
netdev_err(ndev,
"unable to teardown receive buffer's gpadl\n");
return;
}
net_device->recv_buf_gpadl_handle = 0;
}
}
static void netvsc_teardown_send_gpadl(struct hv_device *device,
struct netvsc_device *net_device,
struct net_device *ndev)
{
int ret;
if (net_device->send_buf_gpadl_handle) {
hv_netvsc: untangle the pointer mess We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 18:55:22 +07:00
ret = vmbus_teardown_gpadl(device->channel,
net_device->send_buf_gpadl_handle);
/* If we failed here, we might as well return and have a leak
* rather than continue and a bugchk
*/
if (ret != 0) {
netdev_err(ndev,
"unable to teardown send buffer's gpadl\n");
return;
}
net_device->send_buf_gpadl_handle = 0;
}
}
int netvsc_alloc_recv_comp_ring(struct netvsc_device *net_device, u32 q_idx)
{
struct netvsc_channel *nvchan = &net_device->chan_table[q_idx];
int node = cpu_to_node(nvchan->channel->target_cpu);
size_t size;
size = net_device->recv_completion_cnt * sizeof(struct recv_comp_data);
nvchan->mrc.slots = vzalloc_node(size, node);
if (!nvchan->mrc.slots)
nvchan->mrc.slots = vzalloc(size);
return nvchan->mrc.slots ? 0 : -ENOMEM;
}
static int netvsc_init_buf(struct hv_device *device,
struct netvsc_device *net_device,
const struct netvsc_device_info *device_info)
{
struct nvsp_1_message_send_receive_buffer_complete *resp;
struct net_device *ndev = hv_get_drvdata(device);
struct nvsp_message *init_packet;
unsigned int buf_size;
size_t map_words;
int ret = 0;
/* Get receive buffer area. */
buf_size = device_info->recv_sections * device_info->recv_section_size;
buf_size = roundup(buf_size, PAGE_SIZE);
/* Legacy hosts only allow smaller receive buffer */
if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_2)
buf_size = min_t(unsigned int, buf_size,
NETVSC_RECEIVE_BUFFER_SIZE_LEGACY);
net_device->recv_buf = vzalloc(buf_size);
if (!net_device->recv_buf) {
netdev_err(ndev,
"unable to allocate receive buffer of size %u\n",
buf_size);
ret = -ENOMEM;
goto cleanup;
}
net_device->recv_buf_size = buf_size;
/*
* Establish the gpadl handle for this buffer on this
* channel. Note: This call uses the vmbus connection rather
* than the channel to establish the gpadl handle.
*/
ret = vmbus_establish_gpadl(device->channel, net_device->recv_buf,
buf_size,
&net_device->recv_buf_gpadl_handle);
if (ret != 0) {
netdev_err(ndev,
"unable to establish receive buffer's gpadl\n");
goto cleanup;
}
/* Notify the NetVsp of the gpadl handle */
init_packet = &net_device->channel_init_pkt;
memset(init_packet, 0, sizeof(struct nvsp_message));
init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_RECV_BUF;
init_packet->msg.v1_msg.send_recv_buf.
gpadl_handle = net_device->recv_buf_gpadl_handle;
init_packet->msg.v1_msg.
send_recv_buf.id = NETVSC_RECEIVE_BUFFER_ID;
trace_nvsp_send(ndev, init_packet);
/* Send the gpadl notification request */
ret = vmbus_sendpacket(device->channel, init_packet,
sizeof(struct nvsp_message),
(unsigned long)init_packet,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0) {
netdev_err(ndev,
"unable to send receive buffer's gpadl to netvsp\n");
goto cleanup;
}
wait_for_completion(&net_device->channel_init_wait);
/* Check the response */
resp = &init_packet->msg.v1_msg.send_recv_buf_complete;
if (resp->status != NVSP_STAT_SUCCESS) {
netdev_err(ndev,
"Unable to complete receive buffer initialization with NetVsp - status %d\n",
resp->status);
ret = -EINVAL;
goto cleanup;
}
/* Parse the response */
netdev_dbg(ndev, "Receive sections: %u sub_allocs: size %u count: %u\n",
resp->num_sections, resp->sections[0].sub_alloc_size,
resp->sections[0].num_sub_allocs);
/* There should only be one section for the entire receive buffer */
if (resp->num_sections != 1 || resp->sections[0].offset != 0) {
ret = -EINVAL;
goto cleanup;
}
net_device->recv_section_size = resp->sections[0].sub_alloc_size;
net_device->recv_section_cnt = resp->sections[0].num_sub_allocs;
/* Setup receive completion ring */
net_device->recv_completion_cnt
= round_up(net_device->recv_section_cnt + 1,
PAGE_SIZE / sizeof(u64));
ret = netvsc_alloc_recv_comp_ring(net_device, 0);
if (ret)
goto cleanup;
/* Now setup the send buffer. */
buf_size = device_info->send_sections * device_info->send_section_size;
buf_size = round_up(buf_size, PAGE_SIZE);
net_device->send_buf = vzalloc(buf_size);
if (!net_device->send_buf) {
netdev_err(ndev, "unable to allocate send buffer of size %u\n",
buf_size);
ret = -ENOMEM;
goto cleanup;
}
/* Establish the gpadl handle for this buffer on this
* channel. Note: This call uses the vmbus connection rather
* than the channel to establish the gpadl handle.
*/
ret = vmbus_establish_gpadl(device->channel, net_device->send_buf,
buf_size,
&net_device->send_buf_gpadl_handle);
if (ret != 0) {
netdev_err(ndev,
"unable to establish send buffer's gpadl\n");
goto cleanup;
}
/* Notify the NetVsp of the gpadl handle */
init_packet = &net_device->channel_init_pkt;
memset(init_packet, 0, sizeof(struct nvsp_message));
init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF;
init_packet->msg.v1_msg.send_send_buf.gpadl_handle =
net_device->send_buf_gpadl_handle;
init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID;
trace_nvsp_send(ndev, init_packet);
/* Send the gpadl notification request */
ret = vmbus_sendpacket(device->channel, init_packet,
sizeof(struct nvsp_message),
(unsigned long)init_packet,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0) {
netdev_err(ndev,
"unable to send send buffer's gpadl to netvsp\n");
goto cleanup;
}
wait_for_completion(&net_device->channel_init_wait);
/* Check the response */
if (init_packet->msg.v1_msg.
send_send_buf_complete.status != NVSP_STAT_SUCCESS) {
netdev_err(ndev, "Unable to complete send buffer "
"initialization with NetVsp - status %d\n",
init_packet->msg.v1_msg.
send_send_buf_complete.status);
ret = -EINVAL;
goto cleanup;
}
/* Parse the response */
net_device->send_section_size = init_packet->msg.
v1_msg.send_send_buf_complete.section_size;
/* Section count is simply the size divided by the section size. */
net_device->send_section_cnt = buf_size / net_device->send_section_size;
netdev_dbg(ndev, "Send section size: %d, Section count:%d\n",
net_device->send_section_size, net_device->send_section_cnt);
/* Setup state for managing the send buffer. */
map_words = DIV_ROUND_UP(net_device->send_section_cnt, BITS_PER_LONG);
net_device->send_section_map = kcalloc(map_words, sizeof(ulong), GFP_KERNEL);
if (net_device->send_section_map == NULL) {
ret = -ENOMEM;
goto cleanup;
}
goto exit;
cleanup:
netvsc_revoke_recv_buf(device, net_device, ndev);
netvsc_revoke_send_buf(device, net_device, ndev);
netvsc_teardown_recv_gpadl(device, net_device, ndev);
netvsc_teardown_send_gpadl(device, net_device, ndev);
exit:
return ret;
}
/* Negotiate NVSP protocol version */
static int negotiate_nvsp_ver(struct hv_device *device,
struct netvsc_device *net_device,
struct nvsp_message *init_packet,
u32 nvsp_ver)
{
struct net_device *ndev = hv_get_drvdata(device);
int ret;
memset(init_packet, 0, sizeof(struct nvsp_message));
init_packet->hdr.msg_type = NVSP_MSG_TYPE_INIT;
init_packet->msg.init_msg.init.min_protocol_ver = nvsp_ver;
init_packet->msg.init_msg.init.max_protocol_ver = nvsp_ver;
trace_nvsp_send(ndev, init_packet);
/* Send the init request */
ret = vmbus_sendpacket(device->channel, init_packet,
sizeof(struct nvsp_message),
(unsigned long)init_packet,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
return ret;
wait_for_completion(&net_device->channel_init_wait);
if (init_packet->msg.init_msg.init_complete.status !=
NVSP_STAT_SUCCESS)
return -EINVAL;
if (nvsp_ver == NVSP_PROTOCOL_VERSION_1)
return 0;
/* NVSPv2 or later: Send NDIS config */
memset(init_packet, 0, sizeof(struct nvsp_message));
init_packet->hdr.msg_type = NVSP_MSG2_TYPE_SEND_NDIS_CONFIG;
init_packet->msg.v2_msg.send_ndis_config.mtu = ndev->mtu + ETH_HLEN;
init_packet->msg.v2_msg.send_ndis_config.capability.ieee8021q = 1;
if (nvsp_ver >= NVSP_PROTOCOL_VERSION_5) {
init_packet->msg.v2_msg.send_ndis_config.capability.sriov = 1;
/* Teaming bit is needed to receive link speed updates */
init_packet->msg.v2_msg.send_ndis_config.capability.teaming = 1;
}
if (nvsp_ver >= NVSP_PROTOCOL_VERSION_61)
init_packet->msg.v2_msg.send_ndis_config.capability.rsc = 1;
trace_nvsp_send(ndev, init_packet);
ret = vmbus_sendpacket(device->channel, init_packet,
sizeof(struct nvsp_message),
(unsigned long)init_packet,
VM_PKT_DATA_INBAND, 0);
return ret;
}
static int netvsc_connect_vsp(struct hv_device *device,
struct netvsc_device *net_device,
const struct netvsc_device_info *device_info)
{
struct net_device *ndev = hv_get_drvdata(device);
static const u32 ver_list[] = {
NVSP_PROTOCOL_VERSION_1, NVSP_PROTOCOL_VERSION_2,
NVSP_PROTOCOL_VERSION_4, NVSP_PROTOCOL_VERSION_5,
NVSP_PROTOCOL_VERSION_6, NVSP_PROTOCOL_VERSION_61
};
struct nvsp_message *init_packet;
int ndis_version, i, ret;
init_packet = &net_device->channel_init_pkt;
/* Negotiate the latest NVSP protocol supported */
for (i = ARRAY_SIZE(ver_list) - 1; i >= 0; i--)
if (negotiate_nvsp_ver(device, net_device, init_packet,
ver_list[i]) == 0) {
net_device->nvsp_version = ver_list[i];
break;
}
if (i < 0) {
ret = -EPROTO;
goto cleanup;
}
pr_debug("Negotiated NVSP version:%x\n", net_device->nvsp_version);
/* Send the ndis version */
memset(init_packet, 0, sizeof(struct nvsp_message));
if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_4)
ndis_version = 0x00060001;
else
ndis_version = 0x0006001e;
init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_NDIS_VER;
init_packet->msg.v1_msg.
send_ndis_ver.ndis_major_ver =
(ndis_version & 0xFFFF0000) >> 16;
init_packet->msg.v1_msg.
send_ndis_ver.ndis_minor_ver =
ndis_version & 0xFFFF;
trace_nvsp_send(ndev, init_packet);
/* Send the init request */
ret = vmbus_sendpacket(device->channel, init_packet,
sizeof(struct nvsp_message),
(unsigned long)init_packet,
VM_PKT_DATA_INBAND, 0);
if (ret != 0)
goto cleanup;
ret = netvsc_init_buf(device, net_device, device_info);
cleanup:
return ret;
}
/*
* netvsc_device_remove - Callback when the root bus device is removed
*/
void netvsc_device_remove(struct hv_device *device)
{
hv_netvsc: untangle the pointer mess We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 18:55:22 +07:00
struct net_device *ndev = hv_get_drvdata(device);
struct net_device_context *net_device_ctx = netdev_priv(ndev);
struct netvsc_device *net_device
= rtnl_dereference(net_device_ctx->nvdev);
int i;
hv_netvsc: Ensure correct teardown message sequence order Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06 02:09:20 +07:00
/*
* Revoke receive buffer. If host is pre-Win2016 then tear down
* receive buffer GPADL. Do the same for send buffer.
*/
netvsc_revoke_recv_buf(device, net_device, ndev);
hv_netvsc: Ensure correct teardown message sequence order Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06 02:09:20 +07:00
if (vmbus_proto_version < VERSION_WIN10)
netvsc_teardown_recv_gpadl(device, net_device, ndev);
hv_netvsc: Ensure correct teardown message sequence order Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06 02:09:20 +07:00
netvsc_revoke_send_buf(device, net_device, ndev);
hv_netvsc: Ensure correct teardown message sequence order Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06 02:09:20 +07:00
if (vmbus_proto_version < VERSION_WIN10)
netvsc_teardown_send_gpadl(device, net_device, ndev);
RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
/* And disassociate NAPI context from device */
for (i = 0; i < net_device->num_chn; i++)
netif_napi_del(&net_device->chan_table[i].napi);
/*
* At this point, no one should be accessing net_device
* except in here
*/
netdev_dbg(ndev, "net device safe to remove\n");
/* Now, we can close the channel safely */
vmbus_close(device->channel);
hv_netvsc: Ensure correct teardown message sequence order Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06 02:09:20 +07:00
/*
* If host is Win2016 or higher then we do the GPADL tear down
* here after VMBus is closed.
*/
if (vmbus_proto_version >= VERSION_WIN10) {
netvsc_teardown_recv_gpadl(device, net_device, ndev);
netvsc_teardown_send_gpadl(device, net_device, ndev);
}
/* Release all resources */
free_netvsc_device_rcu(net_device);
}
#define RING_AVAIL_PERCENT_HIWATER 20
#define RING_AVAIL_PERCENT_LOWATER 10
static inline void netvsc_free_send_slot(struct netvsc_device *net_device,
u32 index)
{
sync_change_bit(index, net_device->send_section_map);
}
static void netvsc_send_tx_complete(struct net_device *ndev,
struct netvsc_device *net_device,
struct vmbus_channel *channel,
const struct vmpacket_descriptor *desc,
int budget)
{
struct sk_buff *skb = (struct sk_buff *)(unsigned long)desc->trans_id;
struct net_device_context *ndev_ctx = netdev_priv(ndev);
u16 q_idx = 0;
int queue_sends;
/* Notify the layer above us */
if (likely(skb)) {
const struct hv_netvsc_packet *packet
= (struct hv_netvsc_packet *)skb->cb;
u32 send_index = packet->send_buf_index;
struct netvsc_stats *tx_stats;
if (send_index != NETVSC_INVALID_INDEX)
netvsc_free_send_slot(net_device, send_index);
q_idx = packet->q_idx;
tx_stats = &net_device->chan_table[q_idx].tx_stats;
u64_stats_update_begin(&tx_stats->syncp);
tx_stats->packets += packet->total_packets;
tx_stats->bytes += packet->total_bytes;
u64_stats_update_end(&tx_stats->syncp);
napi_consume_skb(skb, budget);
}
queue_sends =
atomic_dec_return(&net_device->chan_table[q_idx].queue_sends);
if (unlikely(net_device->destroy)) {
if (queue_sends == 0)
wake_up(&net_device->wait_drain);
} else {
struct netdev_queue *txq = netdev_get_tx_queue(ndev, q_idx);
if (netif_tx_queue_stopped(txq) && !net_device->tx_disable &&
(hv_get_avail_to_write_percent(&channel->outbound) >
RING_AVAIL_PERCENT_HIWATER || queue_sends < 1)) {
netif_tx_wake_queue(txq);
ndev_ctx->eth_stats.wake_queue++;
}
}
}
static void netvsc_send_completion(struct net_device *ndev,
struct netvsc_device *net_device,
struct vmbus_channel *incoming_channel,
const struct vmpacket_descriptor *desc,
int budget)
{
const struct nvsp_message *nvsp_packet = hv_pkt_data(desc);
switch (nvsp_packet->hdr.msg_type) {
case NVSP_MSG_TYPE_INIT_COMPLETE:
case NVSP_MSG1_TYPE_SEND_RECV_BUF_COMPLETE:
case NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE:
case NVSP_MSG5_TYPE_SUBCHANNEL:
/* Copy the response back */
memcpy(&net_device->channel_init_pkt, nvsp_packet,
sizeof(struct nvsp_message));
complete(&net_device->channel_init_wait);
break;
case NVSP_MSG1_TYPE_SEND_RNDIS_PKT_COMPLETE:
netvsc_send_tx_complete(ndev, net_device, incoming_channel,
desc, budget);
break;
default:
netdev_err(ndev,
"Unknown send completion type %d received!!\n",
nvsp_packet->hdr.msg_type);
}
}
static u32 netvsc_get_next_send_section(struct netvsc_device *net_device)
{
unsigned long *map_addr = net_device->send_section_map;
unsigned int i;
for_each_clear_bit(i, map_addr, net_device->send_section_cnt) {
if (sync_test_and_set_bit(i, map_addr) == 0)
return i;
}
return NETVSC_INVALID_INDEX;
}
static void netvsc_copy_to_send_buf(struct netvsc_device *net_device,
unsigned int section_index,
u32 pend_size,
struct hv_netvsc_packet *packet,
struct rndis_message *rndis_msg,
struct hv_page_buffer *pb,
bool xmit_more)
{
char *start = net_device->send_buf;
char *dest = start + (section_index * net_device->send_section_size)
+ pend_size;
int i;
u32 padding = 0;
u32 page_count = packet->cp_partial ? packet->rmsg_pgcnt :
packet->page_buf_cnt;
u32 remain;
/* Add padding */
remain = packet->total_data_buflen & (net_device->pkt_align - 1);
if (xmit_more && remain) {
padding = net_device->pkt_align - remain;
rndis_msg->msg_len += padding;
packet->total_data_buflen += padding;
}
for (i = 0; i < page_count; i++) {
char *src = phys_to_virt(pb[i].pfn << PAGE_SHIFT);
u32 offset = pb[i].offset;
u32 len = pb[i].len;
memcpy(dest, (src + offset), len);
dest += len;
}
if (padding)
memset(dest, 0, padding);
}
static inline int netvsc_send_pkt(
struct hv_device *device,
struct hv_netvsc_packet *packet,
struct netvsc_device *net_device,
struct hv_page_buffer *pb,
struct sk_buff *skb)
{
struct nvsp_message nvmsg;
struct nvsp_1_message_send_rndis_packet *rpkt =
&nvmsg.msg.v1_msg.send_rndis_pkt;
struct netvsc_channel * const nvchan =
&net_device->chan_table[packet->q_idx];
struct vmbus_channel *out_channel = nvchan->channel;
struct net_device *ndev = hv_get_drvdata(device);
struct net_device_context *ndev_ctx = netdev_priv(ndev);
struct netdev_queue *txq = netdev_get_tx_queue(ndev, packet->q_idx);
u64 req_id;
int ret;
u32 ring_avail = hv_get_avail_to_write_percent(&out_channel->outbound);
nvmsg.hdr.msg_type = NVSP_MSG1_TYPE_SEND_RNDIS_PKT;
if (skb)
rpkt->channel_type = 0; /* 0 is RMC_DATA */
else
rpkt->channel_type = 1; /* 1 is RMC_CONTROL */
rpkt->send_buf_section_index = packet->send_buf_index;
if (packet->send_buf_index == NETVSC_INVALID_INDEX)
rpkt->send_buf_section_size = 0;
else
rpkt->send_buf_section_size = packet->total_data_buflen;
req_id = (ulong)skb;
if (out_channel->rescind)
return -ENODEV;
trace_nvsp_send_pkt(ndev, out_channel, rpkt);
if (packet->page_buf_cnt) {
if (packet->cp_partial)
pb += packet->rmsg_pgcnt;
ret = vmbus_sendpacket_pagebuffer(out_channel,
pb, packet->page_buf_cnt,
&nvmsg, sizeof(nvmsg),
req_id);
} else {
ret = vmbus_sendpacket(out_channel,
&nvmsg, sizeof(nvmsg),
req_id, VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
}
if (ret == 0) {
atomic_inc_return(&nvchan->queue_sends);
if (ring_avail < RING_AVAIL_PERCENT_LOWATER) {
netif_tx_stop_queue(txq);
ndev_ctx->eth_stats.stop_queue++;
}
} else if (ret == -EAGAIN) {
netif_tx_stop_queue(txq);
ndev_ctx->eth_stats.stop_queue++;
} else {
netdev_err(ndev,
"Unable to send packet pages %u len %u, ret %d\n",
packet->page_buf_cnt, packet->total_data_buflen,
ret);
}
if (netif_tx_queue_stopped(txq) &&
atomic_read(&nvchan->queue_sends) < 1 &&
!net_device->tx_disable) {
netif_tx_wake_queue(txq);
ndev_ctx->eth_stats.wake_queue++;
if (ret == -EAGAIN)
ret = -ENOSPC;
}
return ret;
}
/* Move packet out of multi send data (msd), and clear msd */
static inline void move_pkt_msd(struct hv_netvsc_packet **msd_send,
struct sk_buff **msd_skb,
struct multi_send_data *msdp)
{
*msd_skb = msdp->skb;
*msd_send = msdp->pkt;
msdp->skb = NULL;
msdp->pkt = NULL;
msdp->count = 0;
}
/* RCU already held by caller */
int netvsc_send(struct net_device *ndev,
struct hv_netvsc_packet *packet,
struct rndis_message *rndis_msg,
struct hv_page_buffer *pb,
struct sk_buff *skb,
bool xdp_tx)
{
struct net_device_context *ndev_ctx = netdev_priv(ndev);
struct netvsc_device *net_device
= rcu_dereference_bh(ndev_ctx->nvdev);
struct hv_device *device = ndev_ctx->device_ctx;
int ret = 0;
struct netvsc_channel *nvchan;
u32 pktlen = packet->total_data_buflen, msd_len = 0;
unsigned int section_index = NETVSC_INVALID_INDEX;
struct multi_send_data *msdp;
struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL;
struct sk_buff *msd_skb = NULL;
bool try_batch, xmit_more;
/* If device is rescinded, return error and packet will get dropped. */
if (unlikely(!net_device || net_device->destroy))
return -ENODEV;
nvchan = &net_device->chan_table[packet->q_idx];
packet->send_buf_index = NETVSC_INVALID_INDEX;
packet->cp_partial = false;
/* Send a control message or XDP packet directly without accessing
* msd (Multi-Send Data) field which may be changed during data packet
* processing.
*/
if (!skb || xdp_tx)
return netvsc_send_pkt(device, packet, net_device, pb, skb);
/* batch packets in send buffer if possible */
msdp = &nvchan->msd;
if (msdp->pkt)
msd_len = msdp->pkt->total_data_buflen;
try_batch = msd_len > 0 && msdp->count < net_device->max_pkt;
if (try_batch && msd_len + pktlen + net_device->pkt_align <
net_device->send_section_size) {
section_index = msdp->pkt->send_buf_index;
} else if (try_batch && msd_len + packet->rmsg_size <
net_device->send_section_size) {
section_index = msdp->pkt->send_buf_index;
packet->cp_partial = true;
} else if (pktlen + net_device->pkt_align <
net_device->send_section_size) {
section_index = netvsc_get_next_send_section(net_device);
if (unlikely(section_index == NETVSC_INVALID_INDEX)) {
++ndev_ctx->eth_stats.tx_send_full;
} else {
move_pkt_msd(&msd_send, &msd_skb, msdp);
msd_len = 0;
}
}
/* Keep aggregating only if stack says more data is coming
* and not doing mixed modes send and not flow blocked
*/
xmit_more = netdev_xmit_more() &&
!packet->cp_partial &&
!netif_xmit_stopped(netdev_get_tx_queue(ndev, packet->q_idx));
if (section_index != NETVSC_INVALID_INDEX) {
netvsc_copy_to_send_buf(net_device,
section_index, msd_len,
packet, rndis_msg, pb, xmit_more);
packet->send_buf_index = section_index;
if (packet->cp_partial) {
packet->page_buf_cnt -= packet->rmsg_pgcnt;
packet->total_data_buflen = msd_len + packet->rmsg_size;
} else {
packet->page_buf_cnt = 0;
packet->total_data_buflen += msd_len;
}
if (msdp->pkt) {
packet->total_packets += msdp->pkt->total_packets;
packet->total_bytes += msdp->pkt->total_bytes;
}
if (msdp->skb)
dev_consume_skb_any(msdp->skb);
if (xmit_more) {
msdp->skb = skb;
msdp->pkt = packet;
msdp->count++;
} else {
cur_send = packet;
msdp->skb = NULL;
msdp->pkt = NULL;
msdp->count = 0;
}
} else {
move_pkt_msd(&msd_send, &msd_skb, msdp);
cur_send = packet;
}
if (msd_send) {
int m_ret = netvsc_send_pkt(device, msd_send, net_device,
NULL, msd_skb);
if (m_ret != 0) {
netvsc_free_send_slot(net_device,
msd_send->send_buf_index);
dev_kfree_skb_any(msd_skb);
}
}
if (cur_send)
ret = netvsc_send_pkt(device, cur_send, net_device, pb, skb);
if (ret != 0 && section_index != NETVSC_INVALID_INDEX)
netvsc_free_send_slot(net_device, section_index);
return ret;
}
/* Send pending recv completions */
static int send_recv_completions(struct net_device *ndev,
struct netvsc_device *nvdev,
struct netvsc_channel *nvchan)
{
struct multi_recv_comp *mrc = &nvchan->mrc;
struct recv_comp_msg {
struct nvsp_message_header hdr;
u32 status;
} __packed;
struct recv_comp_msg msg = {
.hdr.msg_type = NVSP_MSG1_TYPE_SEND_RNDIS_PKT_COMPLETE,
};
int ret;
while (mrc->first != mrc->next) {
const struct recv_comp_data *rcd
= mrc->slots + mrc->first;
msg.status = rcd->status;
ret = vmbus_sendpacket(nvchan->channel, &msg, sizeof(msg),
rcd->tid, VM_PKT_COMP, 0);
if (unlikely(ret)) {
struct net_device_context *ndev_ctx = netdev_priv(ndev);
++ndev_ctx->eth_stats.rx_comp_busy;
return ret;
}
if (++mrc->first == nvdev->recv_completion_cnt)
mrc->first = 0;
}
/* receive completion ring has been emptied */
if (unlikely(nvdev->destroy))
wake_up(&nvdev->wait_drain);
return 0;
}
/* Count how many receive completions are outstanding */
static void recv_comp_slot_avail(const struct netvsc_device *nvdev,
const struct multi_recv_comp *mrc,
u32 *filled, u32 *avail)
{
u32 count = nvdev->recv_completion_cnt;
if (mrc->next >= mrc->first)
*filled = mrc->next - mrc->first;
else
*filled = (count - mrc->first) + mrc->next;
*avail = count - *filled - 1;
}
/* Add receive complete to ring to send to host. */
static void enq_receive_complete(struct net_device *ndev,
struct netvsc_device *nvdev, u16 q_idx,
u64 tid, u32 status)
{
struct netvsc_channel *nvchan = &nvdev->chan_table[q_idx];
struct multi_recv_comp *mrc = &nvchan->mrc;
struct recv_comp_data *rcd;
u32 filled, avail;
recv_comp_slot_avail(nvdev, mrc, &filled, &avail);
if (unlikely(filled > NAPI_POLL_WEIGHT)) {
send_recv_completions(ndev, nvdev, nvchan);
recv_comp_slot_avail(nvdev, mrc, &filled, &avail);
}
if (unlikely(!avail)) {
netdev_err(ndev, "Recv_comp full buf q:%hd, tid:%llx\n",
q_idx, tid);
return;
}
rcd = mrc->slots + mrc->next;
rcd->tid = tid;
rcd->status = status;
if (++mrc->next == nvdev->recv_completion_cnt)
mrc->next = 0;
}
static int netvsc_receive(struct net_device *ndev,
struct netvsc_device *net_device,
struct netvsc_channel *nvchan,
const struct vmpacket_descriptor *desc,
const struct nvsp_message *nvsp)
{
struct net_device_context *net_device_ctx = netdev_priv(ndev);
struct vmbus_channel *channel = nvchan->channel;
const struct vmtransfer_page_packet_header *vmxferpage_packet
= container_of(desc, const struct vmtransfer_page_packet_header, d);
u16 q_idx = channel->offermsg.offer.sub_channel_index;
char *recv_buf = net_device->recv_buf;
u32 status = NVSP_STAT_SUCCESS;
int i;
int count = 0;
/* Make sure this is a valid nvsp packet */
if (unlikely(nvsp->hdr.msg_type != NVSP_MSG1_TYPE_SEND_RNDIS_PKT)) {
netif_err(net_device_ctx, rx_err, ndev,
"Unknown nvsp packet type received %u\n",
nvsp->hdr.msg_type);
return 0;
}
if (unlikely(vmxferpage_packet->xfer_pageset_id != NETVSC_RECEIVE_BUFFER_ID)) {
netif_err(net_device_ctx, rx_err, ndev,
"Invalid xfer page set id - expecting %x got %x\n",
NETVSC_RECEIVE_BUFFER_ID,
vmxferpage_packet->xfer_pageset_id);
return 0;
}
count = vmxferpage_packet->range_cnt;
/* Each range represents 1 RNDIS pkt that contains 1 ethernet frame */
for (i = 0; i < count; i++) {
u32 offset = vmxferpage_packet->ranges[i].byte_offset;
u32 buflen = vmxferpage_packet->ranges[i].byte_count;
void *data;
int ret;
if (unlikely(offset + buflen > net_device->recv_buf_size)) {
nvchan->rsc.cnt = 0;
status = NVSP_STAT_FAIL;
netif_err(net_device_ctx, rx_err, ndev,
"Packet offset:%u + len:%u too big\n",
offset, buflen);
continue;
}
data = recv_buf + offset;
nvchan->rsc.is_last = (i == count - 1);
trace_rndis_recv(ndev, q_idx, data);
/* Pass it to the upper layer */
ret = rndis_filter_receive(ndev, net_device,
nvchan, data, buflen);
if (unlikely(ret != NVSP_STAT_SUCCESS))
status = NVSP_STAT_FAIL;
}
enq_receive_complete(ndev, net_device, q_idx,
vmxferpage_packet->d.trans_id, status);
return count;
}
static void netvsc_send_table(struct net_device *ndev,
struct netvsc_device *nvscdev,
const struct nvsp_message *nvmsg,
u32 msglen)
{
struct net_device_context *net_device_ctx = netdev_priv(ndev);
u32 count, offset, *tab;
int i;
count = nvmsg->msg.v5_msg.send_table.count;
offset = nvmsg->msg.v5_msg.send_table.offset;
if (count != VRSS_SEND_TAB_SIZE) {
netdev_err(ndev, "Received wrong send-table size:%u\n", count);
return;
}
/* If negotiated version <= NVSP_PROTOCOL_VERSION_6, the offset may be
* wrong due to a host bug. So fix the offset here.
*/
if (nvscdev->nvsp_version <= NVSP_PROTOCOL_VERSION_6 &&
msglen >= sizeof(struct nvsp_message_header) +
sizeof(union nvsp_6_message_uber) + count * sizeof(u32))
offset = sizeof(struct nvsp_message_header) +
sizeof(union nvsp_6_message_uber);
/* Boundary check for all versions */
if (offset > msglen - count * sizeof(u32)) {
netdev_err(ndev, "Received send-table offset too big:%u\n",
offset);
return;
}
tab = (void *)nvmsg + offset;
for (i = 0; i < count; i++)
net_device_ctx->tx_table[i] = tab[i];
}
static void netvsc_send_vf(struct net_device *ndev,
const struct nvsp_message *nvmsg)
{
struct net_device_context *net_device_ctx = netdev_priv(ndev);
net_device_ctx->vf_alloc = nvmsg->msg.v4_msg.vf_assoc.allocated;
net_device_ctx->vf_serial = nvmsg->msg.v4_msg.vf_assoc.serial;
netdev_info(ndev, "VF slot %u %s\n",
net_device_ctx->vf_serial,
net_device_ctx->vf_alloc ? "added" : "removed");
}
static void netvsc_receive_inband(struct net_device *ndev,
struct netvsc_device *nvscdev,
const struct nvsp_message *nvmsg,
u32 msglen)
{
switch (nvmsg->hdr.msg_type) {
case NVSP_MSG5_TYPE_SEND_INDIRECTION_TABLE:
netvsc_send_table(ndev, nvscdev, nvmsg, msglen);
break;
case NVSP_MSG4_TYPE_SEND_VF_ASSOCIATION:
netvsc_send_vf(ndev, nvmsg);
break;
}
}
static int netvsc_process_raw_pkt(struct hv_device *device,
struct netvsc_channel *nvchan,
struct netvsc_device *net_device,
struct net_device *ndev,
const struct vmpacket_descriptor *desc,
int budget)
{
struct vmbus_channel *channel = nvchan->channel;
const struct nvsp_message *nvmsg = hv_pkt_data(desc);
u32 msglen = hv_pkt_datalen(desc);
trace_nvsp_recv(ndev, channel, nvmsg);
switch (desc->type) {
case VM_PKT_COMP:
netvsc_send_completion(ndev, net_device, channel,
desc, budget);
break;
case VM_PKT_DATA_USING_XFER_PAGES:
return netvsc_receive(ndev, net_device, nvchan,
desc, nvmsg);
break;
case VM_PKT_DATA_INBAND:
netvsc_receive_inband(ndev, net_device, nvmsg, msglen);
break;
default:
netdev_err(ndev, "unhandled packet type %d, tid %llx\n",
desc->type, desc->trans_id);
break;
}
return 0;
}
static struct hv_device *netvsc_channel_to_device(struct vmbus_channel *channel)
{
struct vmbus_channel *primary = channel->primary_channel;
return primary ? primary->device_obj : channel->device_obj;
}
/* Network processing softirq
* Process data in incoming ring buffer from host
* Stops when ring is empty or budget is met or exceeded.
*/
int netvsc_poll(struct napi_struct *napi, int budget)
{
struct netvsc_channel *nvchan
= container_of(napi, struct netvsc_channel, napi);
struct netvsc_device *net_device = nvchan->net_device;
struct vmbus_channel *channel = nvchan->channel;
struct hv_device *device = netvsc_channel_to_device(channel);
struct net_device *ndev = hv_get_drvdata(device);
int work_done = 0;
int ret;
/* If starting a new interval */
if (!nvchan->desc)
nvchan->desc = hv_pkt_iter_first(channel);
while (nvchan->desc && work_done < budget) {
work_done += netvsc_process_raw_pkt(device, nvchan, net_device,
ndev, nvchan->desc, budget);
nvchan->desc = hv_pkt_iter_next(channel, nvchan->desc);
}
/* Send any pending receive completions */
ret = send_recv_completions(ndev, net_device, nvchan);
/* If it did not exhaust NAPI budget this time
* and not doing busy poll
* then re-enable host interrupts
* and reschedule if ring is not empty
* or sending receive completion failed.
*/
if (work_done < budget &&
napi_complete_done(napi, work_done) &&
(ret || hv_end_read(&channel->inbound)) &&
napi_schedule_prep(napi)) {
hv_begin_read(&channel->inbound);
__napi_schedule(napi);
}
/* Driver may overshoot since multiple packets per descriptor */
return min(work_done, budget);
}
/* Call back when data is available in host ring buffer.
* Processing is deferred until network softirq (NAPI)
*/
void netvsc_channel_cb(void *context)
{
struct netvsc_channel *nvchan = context;
struct vmbus_channel *channel = nvchan->channel;
struct hv_ring_buffer_info *rbi = &channel->inbound;
/* preload first vmpacket descriptor */
prefetch(hv_get_ring_buffer(rbi) + rbi->priv_read_index);
if (napi_schedule_prep(&nvchan->napi)) {
/* disable interrupts from host */
hv_begin_read(rbi);
__napi_schedule_irqoff(&nvchan->napi);
}
}
/*
* netvsc_device_add - Callback when the device belonging to this
* driver is added
*/
struct netvsc_device *netvsc_device_add(struct hv_device *device,
const struct netvsc_device_info *device_info)
{
int i, ret = 0;
struct netvsc_device *net_device;
struct net_device *ndev = hv_get_drvdata(device);
struct net_device_context *net_device_ctx = netdev_priv(ndev);
net_device = alloc_net_device();
if (!net_device)
return ERR_PTR(-ENOMEM);
for (i = 0; i < VRSS_SEND_TAB_SIZE; i++)
net_device_ctx->tx_table[i] = 0;
/* Because the device uses NAPI, all the interrupt batching and
* control is done via Net softirq, not the channel handling
*/
set_channel_read_mode(device->channel, HV_CALL_ISR);
/* If we're reopening the device we may have multiple queues, fill the
* chn_table with the default channel to use it before subchannels are
* opened.
* Initialize the channel state before we open;
* we can be interrupted as soon as we open the channel.
*/
for (i = 0; i < VRSS_CHANNEL_MAX; i++) {
struct netvsc_channel *nvchan = &net_device->chan_table[i];
nvchan->channel = device->channel;
nvchan->net_device = net_device;
u64_stats_init(&nvchan->tx_stats.syncp);
u64_stats_init(&nvchan->rx_stats.syncp);
ret = xdp_rxq_info_reg(&nvchan->xdp_rxq, ndev, i);
if (ret) {
netdev_err(ndev, "xdp_rxq_info_reg fail: %d\n", ret);
goto cleanup2;
}
ret = xdp_rxq_info_reg_mem_model(&nvchan->xdp_rxq,
MEM_TYPE_PAGE_SHARED, NULL);
if (ret) {
netdev_err(ndev, "xdp reg_mem_model fail: %d\n", ret);
goto cleanup2;
}
}
/* Enable NAPI handler before init callbacks */
netif_napi_add(ndev, &net_device->chan_table[0].napi,
netvsc_poll, NAPI_POLL_WEIGHT);
/* Open the channel */
ret = vmbus_open(device->channel, netvsc_ring_bytes,
netvsc_ring_bytes, NULL, 0,
netvsc_channel_cb, net_device->chan_table);
if (ret != 0) {
netdev_err(ndev, "unable to open channel: %d\n", ret);
goto cleanup;
}
/* Channel is opened */
netdev_dbg(ndev, "hv_netvsc channel opened successfully\n");
napi_enable(&net_device->chan_table[0].napi);
/* Connect with the NetVsp */
ret = netvsc_connect_vsp(device, net_device, device_info);
if (ret != 0) {
netdev_err(ndev,
"unable to connect to NetVSP - %d\n", ret);
goto close;
}
/* Writing nvdev pointer unlocks netvsc_send(), make sure chn_table is
* populated.
*/
rcu_assign_pointer(net_device_ctx->nvdev, net_device);
return net_device;
close:
RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
napi_disable(&net_device->chan_table[0].napi);
/* Now, we can close the channel safely */
vmbus_close(device->channel);
cleanup:
netif_napi_del(&net_device->chan_table[0].napi);
cleanup2:
free_netvsc_device(&net_device->rcu);
return ERR_PTR(ret);
}