linux_dsm_epyc7002/drivers/char/tpm/tpm_tis_spi_main.c

299 lines
7.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2015 Infineon Technologies AG
* Copyright (C) 2016 STMicroelectronics SAS
*
* Authors:
* Peter Huewe <peter.huewe@infineon.com>
* Christophe Ricard <christophe-h.ricard@st.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
* Specifications at www.trustedcomputinggroup.org
*
* This device driver implements the TPM interface as defined in
* the TCG TPM Interface Spec version 1.3, revision 27 via _raw/native
* SPI access_.
*
* It is based on the original tpm_tis device driver from Leendert van
* Dorn and Kyleen Hall and Jarko Sakkinnen.
*/
#include <linux/acpi.h>
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/tpm.h>
#include "tpm.h"
#include "tpm_tis_core.h"
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
#include "tpm_tis_spi.h"
#define MAX_SPI_FRAMESIZE 64
/*
* TCG SPI flow control is documented in section 6.4 of the spec[1]. In short,
* keep trying to read from the device until MISO goes high indicating the
* wait state has ended.
*
* [1] https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
*/
static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy,
struct spi_transfer *spi_xfer)
{
struct spi_message m;
int ret, i;
if ((phy->iobuf[3] & 0x01) == 0) {
// handle SPI wait states
for (i = 0; i < TPM_RETRY; i++) {
spi_xfer->len = 1;
spi_message_init(&m);
spi_message_add_tail(spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
return ret;
if (phy->iobuf[0] & 0x01)
break;
}
if (i == TPM_RETRY)
return -ETIMEDOUT;
}
return 0;
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
u8 *in, const u8 *out)
{
struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
int ret = 0;
struct spi_message m;
struct spi_transfer spi_xfer;
u8 transfer_len;
spi_bus_lock(phy->spi_device->master);
while (len) {
transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
phy->iobuf[0] = (in ? 0x80 : 0) | (transfer_len - 1);
phy->iobuf[1] = 0xd4;
phy->iobuf[2] = addr >> 8;
phy->iobuf[3] = addr;
memset(&spi_xfer, 0, sizeof(spi_xfer));
spi_xfer.tx_buf = phy->iobuf;
spi_xfer.rx_buf = phy->iobuf;
spi_xfer.len = 4;
spi_xfer.cs_change = 1;
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
/* Flow control transfers are receive only */
spi_xfer.tx_buf = NULL;
ret = phy->flow_control(phy, &spi_xfer);
if (ret < 0)
goto exit;
spi_xfer.cs_change = 0;
spi_xfer.len = transfer_len;
spi_xfer.delay.value = 5;
spi_xfer.delay.unit = SPI_DELAY_UNIT_USECS;
if (out) {
spi_xfer.tx_buf = phy->iobuf;
spi_xfer.rx_buf = NULL;
memcpy(phy->iobuf, out, transfer_len);
out += transfer_len;
}
spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
reinit_completion(&phy->ready);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
if (in) {
memcpy(in, phy->iobuf, transfer_len);
in += transfer_len;
}
len -= transfer_len;
}
exit:
spi_bus_unlock(phy->spi_device->master);
return ret;
}
static int tpm_tis_spi_read_bytes(struct tpm_tis_data *data, u32 addr,
u16 len, u8 *result)
{
return tpm_tis_spi_transfer(data, addr, len, result, NULL);
}
static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
u16 len, const u8 *value)
{
return tpm_tis_spi_transfer(data, addr, len, NULL, value);
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
{
__le16 result_le;
int rc;
rc = data->phy_ops->read_bytes(data, addr, sizeof(u16),
(u8 *)&result_le);
if (!rc)
*result = le16_to_cpu(result_le);
return rc;
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
{
__le32 result_le;
int rc;
rc = data->phy_ops->read_bytes(data, addr, sizeof(u32),
(u8 *)&result_le);
if (!rc)
*result = le32_to_cpu(result_le);
return rc;
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
{
__le32 value_le;
int rc;
value_le = cpu_to_le32(value);
rc = data->phy_ops->write_bytes(data, addr, sizeof(u32),
(u8 *)&value_le);
return rc;
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy,
int irq, const struct tpm_tis_phy_ops *phy_ops)
{
phy->iobuf = devm_kmalloc(&spi->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
if (!phy->iobuf)
return -ENOMEM;
phy->spi_device = spi;
return tpm_tis_core_init(&spi->dev, &phy->priv, irq, phy_ops, NULL);
}
static const struct tpm_tis_phy_ops tpm_spi_phy_ops = {
.read_bytes = tpm_tis_spi_read_bytes,
.write_bytes = tpm_tis_spi_write_bytes,
.read16 = tpm_tis_spi_read16,
.read32 = tpm_tis_spi_read32,
.write32 = tpm_tis_spi_write32,
};
static int tpm_tis_spi_probe(struct spi_device *dev)
{
struct tpm_tis_spi_phy *phy;
int irq;
phy = devm_kzalloc(&dev->dev, sizeof(struct tpm_tis_spi_phy),
GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->flow_control = tpm_tis_spi_flow_control;
/* If the SPI device has an IRQ then use that */
if (dev->irq > 0)
irq = dev->irq;
else
irq = -1;
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
init_completion(&phy->ready);
return tpm_tis_spi_init(dev, phy, irq, &tpm_spi_phy_ops);
}
typedef int (*tpm_tis_spi_probe_func)(struct spi_device *);
static int tpm_tis_spi_driver_probe(struct spi_device *spi)
{
const struct spi_device_id *spi_dev_id = spi_get_device_id(spi);
tpm_tis_spi_probe_func probe_func;
probe_func = of_device_get_match_data(&spi->dev);
if (!probe_func && spi_dev_id)
probe_func = (tpm_tis_spi_probe_func)spi_dev_id->driver_data;
if (!probe_func)
return -ENODEV;
return probe_func(spi);
}
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_spi_resume);
static int tpm_tis_spi_remove(struct spi_device *dev)
{
struct tpm_chip *chip = spi_get_drvdata(dev);
tpm_chip_unregister(chip);
tpm_tis_remove(chip);
return 0;
}
static const struct spi_device_id tpm_tis_spi_id[] = {
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
{ "tpm_tis_spi", (unsigned long)tpm_tis_spi_probe },
{ "cr50", (unsigned long)cr50_spi_probe },
{}
};
MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id);
static const struct of_device_id of_tis_spi_match[] = {
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
{ .compatible = "st,st33htpm-spi", .data = tpm_tis_spi_probe },
{ .compatible = "infineon,slb9670", .data = tpm_tis_spi_probe },
{ .compatible = "tcg,tpm_tis-spi", .data = tpm_tis_spi_probe },
{ .compatible = "google,cr50", .data = cr50_spi_probe },
{}
};
MODULE_DEVICE_TABLE(of, of_tis_spi_match);
static const struct acpi_device_id acpi_tis_spi_match[] = {
{"SMO0768", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, acpi_tis_spi_match);
static struct spi_driver tpm_tis_spi_driver = {
.driver = {
.name = "tpm_tis_spi",
.pm = &tpm_tis_pm,
.of_match_table = of_match_ptr(of_tis_spi_match),
.acpi_match_table = ACPI_PTR(acpi_tis_spi_match),
},
tpm: tpm_tis_spi: Support cr50 devices Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-21 01:32:38 +07:00
.probe = tpm_tis_spi_driver_probe,
.remove = tpm_tis_spi_remove,
.id_table = tpm_tis_spi_id,
};
module_spi_driver(tpm_tis_spi_driver);
MODULE_DESCRIPTION("TPM Driver for native SPI access");
MODULE_LICENSE("GPL");