linux_dsm_epyc7002/fs/ext2/super.c

1526 lines
41 KiB
C
Raw Normal View History

/*
* linux/fs/ext2/super.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/inode.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
*/
#include <linux/module.h>
#include <linux/string.h>
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/parser.h>
#include <linux/random.h>
#include <linux/buffer_head.h>
#include <linux/exportfs.h>
#include <linux/vfs.h>
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/log2.h>
#include <linux/quotaops.h>
#include <asm/uaccess.h>
#include "ext2.h"
#include "xattr.h"
#include "acl.h"
#include "xip.h"
static void ext2_sync_super(struct super_block *sb,
struct ext2_super_block *es, int wait);
static int ext2_remount (struct super_block * sb, int * flags, char * data);
static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf);
static int ext2_sync_fs(struct super_block *sb, int wait);
void ext2_error(struct super_block *sb, const char *function,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
if (!(sb->s_flags & MS_RDONLY)) {
spin_lock(&sbi->s_lock);
sbi->s_mount_state |= EXT2_ERROR_FS;
es->s_state |= cpu_to_le16(EXT2_ERROR_FS);
spin_unlock(&sbi->s_lock);
ext2_sync_super(sb, es, 1);
}
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_CRIT "EXT2-fs (%s): error: %s: %pV\n",
sb->s_id, function, &vaf);
va_end(args);
if (test_opt(sb, ERRORS_PANIC))
panic("EXT2-fs: panic from previous error\n");
if (test_opt(sb, ERRORS_RO)) {
ext2_msg(sb, KERN_CRIT,
"error: remounting filesystem read-only");
sb->s_flags |= MS_RDONLY;
}
}
void ext2_msg(struct super_block *sb, const char *prefix,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk("%sEXT2-fs (%s): %pV\n", prefix, sb->s_id, &vaf);
va_end(args);
}
/*
* This must be called with sbi->s_lock held.
*/
void ext2_update_dynamic_rev(struct super_block *sb)
{
struct ext2_super_block *es = EXT2_SB(sb)->s_es;
if (le32_to_cpu(es->s_rev_level) > EXT2_GOOD_OLD_REV)
return;
ext2_msg(sb, KERN_WARNING,
"warning: updating to rev %d because of "
"new feature flag, running e2fsck is recommended",
EXT2_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT2_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT2_GOOD_OLD_INODE_SIZE);
es->s_rev_level = cpu_to_le32(EXT2_DYNAMIC_REV);
/* leave es->s_feature_*compat flags alone */
/* es->s_uuid will be set by e2fsck if empty */
/*
* The rest of the superblock fields should be zero, and if not it
* means they are likely already in use, so leave them alone. We
* can leave it up to e2fsck to clean up any inconsistencies there.
*/
}
static void ext2_put_super (struct super_block * sb)
{
int db_count;
int i;
struct ext2_sb_info *sbi = EXT2_SB(sb);
dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED);
if (sb->s_dirt)
ext2_write_super(sb);
ext2_xattr_put_super(sb);
if (!(sb->s_flags & MS_RDONLY)) {
struct ext2_super_block *es = sbi->s_es;
spin_lock(&sbi->s_lock);
es->s_state = cpu_to_le16(sbi->s_mount_state);
spin_unlock(&sbi->s_lock);
ext2_sync_super(sb, es, 1);
}
db_count = sbi->s_gdb_count;
for (i = 0; i < db_count; i++)
if (sbi->s_group_desc[i])
brelse (sbi->s_group_desc[i]);
kfree(sbi->s_group_desc);
kfree(sbi->s_debts);
percpu_counter_destroy(&sbi->s_freeblocks_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
brelse (sbi->s_sbh);
sb->s_fs_info = NULL;
kfree(sbi->s_blockgroup_lock);
kfree(sbi);
}
static struct kmem_cache * ext2_inode_cachep;
static struct inode *ext2_alloc_inode(struct super_block *sb)
{
struct ext2_inode_info *ei;
ei = (struct ext2_inode_info *)kmem_cache_alloc(ext2_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
return &ei->vfs_inode;
}
2011-01-07 13:49:49 +07:00
static void ext2_i_callback(struct rcu_head *head)
{
2011-01-07 13:49:49 +07:00
struct inode *inode = container_of(head, struct inode, i_rcu);
INIT_LIST_HEAD(&inode->i_dentry);
kmem_cache_free(ext2_inode_cachep, EXT2_I(inode));
}
2011-01-07 13:49:49 +07:00
static void ext2_destroy_inode(struct inode *inode)
{
call_rcu(&inode->i_rcu, ext2_i_callback);
}
static void init_once(void *foo)
{
struct ext2_inode_info *ei = (struct ext2_inode_info *) foo;
rwlock_init(&ei->i_meta_lock);
#ifdef CONFIG_EXT2_FS_XATTR
init_rwsem(&ei->xattr_sem);
#endif
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
mutex_init(&ei->truncate_mutex);
inode_init_once(&ei->vfs_inode);
}
static int init_inodecache(void)
{
ext2_inode_cachep = kmem_cache_create("ext2_inode_cache",
sizeof(struct ext2_inode_info),
0, (SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
init_once);
if (ext2_inode_cachep == NULL)
return -ENOMEM;
return 0;
}
static void destroy_inodecache(void)
{
kmem_cache_destroy(ext2_inode_cachep);
}
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
struct super_block *sb = vfs->mnt_sb;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
unsigned long def_mount_opts;
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
spin_lock(&sbi->s_lock);
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (sbi->s_sb_block != 1)
seq_printf(seq, ",sb=%lu", sbi->s_sb_block);
if (test_opt(sb, MINIX_DF))
seq_puts(seq, ",minixdf");
if (test_opt(sb, GRPID))
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
seq_puts(seq, ",grpid");
if (!test_opt(sb, GRPID) && (def_mount_opts & EXT2_DEFM_BSDGROUPS))
seq_puts(seq, ",nogrpid");
if (sbi->s_resuid != EXT2_DEF_RESUID ||
le16_to_cpu(es->s_def_resuid) != EXT2_DEF_RESUID) {
seq_printf(seq, ",resuid=%u", sbi->s_resuid);
}
if (sbi->s_resgid != EXT2_DEF_RESGID ||
le16_to_cpu(es->s_def_resgid) != EXT2_DEF_RESGID) {
seq_printf(seq, ",resgid=%u", sbi->s_resgid);
}
if (test_opt(sb, ERRORS_RO)) {
int def_errors = le16_to_cpu(es->s_errors);
if (def_errors == EXT2_ERRORS_PANIC ||
def_errors == EXT2_ERRORS_CONTINUE) {
seq_puts(seq, ",errors=remount-ro");
}
}
if (test_opt(sb, ERRORS_CONT))
seq_puts(seq, ",errors=continue");
if (test_opt(sb, ERRORS_PANIC))
seq_puts(seq, ",errors=panic");
if (test_opt(sb, NO_UID32))
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG))
seq_puts(seq, ",debug");
if (test_opt(sb, OLDALLOC))
seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT2_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
if (!test_opt(sb, XATTR_USER) &&
(def_mount_opts & EXT2_DEFM_XATTR_USER)) {
seq_puts(seq, ",nouser_xattr");
}
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
if (test_opt(sb, POSIX_ACL))
seq_puts(seq, ",acl");
if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT2_DEFM_ACL))
seq_puts(seq, ",noacl");
#endif
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
#if defined(CONFIG_QUOTA)
if (sbi->s_mount_opt & EXT2_MOUNT_USRQUOTA)
seq_puts(seq, ",usrquota");
if (sbi->s_mount_opt & EXT2_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
#if defined(CONFIG_EXT2_FS_XIP)
if (sbi->s_mount_opt & EXT2_MOUNT_XIP)
seq_puts(seq, ",xip");
#endif
if (!test_opt(sb, RESERVATION))
seq_puts(seq, ",noreservation");
spin_unlock(&sbi->s_lock);
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
return 0;
}
#ifdef CONFIG_QUOTA
static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data, size_t len, loff_t off);
static ssize_t ext2_quota_write(struct super_block *sb, int type, const char *data, size_t len, loff_t off);
#endif
static const struct super_operations ext2_sops = {
.alloc_inode = ext2_alloc_inode,
.destroy_inode = ext2_destroy_inode,
.write_inode = ext2_write_inode,
.evict_inode = ext2_evict_inode,
.put_super = ext2_put_super,
.write_super = ext2_write_super,
.sync_fs = ext2_sync_fs,
.statfs = ext2_statfs,
.remount_fs = ext2_remount,
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
.show_options = ext2_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext2_quota_read,
.quota_write = ext2_quota_write,
#endif
};
static struct inode *ext2_nfs_get_inode(struct super_block *sb,
u64 ino, u32 generation)
{
struct inode *inode;
if (ino < EXT2_FIRST_INO(sb) && ino != EXT2_ROOT_INO)
return ERR_PTR(-ESTALE);
if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count))
return ERR_PTR(-ESTALE);
/*
* ext2_iget isn't quite right if the inode is currently unallocated!
* However ext2_iget currently does appropriate checks to handle stale
* inodes so everything is OK.
*/
inode = ext2_iget(sb, ino);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (generation && inode->i_generation != generation) {
/* we didn't find the right inode.. */
iput(inode);
return ERR_PTR(-ESTALE);
}
return inode;
}
static struct dentry *ext2_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
ext2_nfs_get_inode);
}
static struct dentry *ext2_fh_to_parent(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_parent(sb, fid, fh_len, fh_type,
ext2_nfs_get_inode);
}
/* Yes, most of these are left as NULL!!
* A NULL value implies the default, which works with ext2-like file
* systems, but can be improved upon.
* Currently only get_parent is required.
*/
static const struct export_operations ext2_export_ops = {
.fh_to_dentry = ext2_fh_to_dentry,
.fh_to_parent = ext2_fh_to_parent,
.get_parent = ext2_get_parent,
};
static unsigned long get_sb_block(void **data)
{
unsigned long sb_block;
char *options = (char *) *data;
if (!options || strncmp(options, "sb=", 3) != 0)
return 1; /* Default location */
options += 3;
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
printk("EXT2-fs: Invalid sb specification: %s\n",
(char *) *data);
return 1;
}
if (*options == ',')
options++;
*data = (void *) options;
return sb_block;
}
enum {
Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic,
Opt_err_ro, Opt_nouid32, Opt_nocheck, Opt_debug,
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
Opt_oldalloc, Opt_orlov, Opt_nobh, Opt_user_xattr, Opt_nouser_xattr,
Opt_acl, Opt_noacl, Opt_xip, Opt_ignore, Opt_err, Opt_quota,
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
Opt_usrquota, Opt_grpquota, Opt_reservation, Opt_noreservation
};
static const match_table_t tokens = {
{Opt_bsd_df, "bsddf"},
{Opt_minix_df, "minixdf"},
{Opt_grpid, "grpid"},
{Opt_grpid, "bsdgroups"},
{Opt_nogrpid, "nogrpid"},
{Opt_nogrpid, "sysvgroups"},
{Opt_resgid, "resgid=%u"},
{Opt_resuid, "resuid=%u"},
{Opt_sb, "sb=%u"},
{Opt_err_cont, "errors=continue"},
{Opt_err_panic, "errors=panic"},
{Opt_err_ro, "errors=remount-ro"},
{Opt_nouid32, "nouid32"},
{Opt_nocheck, "check=none"},
{Opt_nocheck, "nocheck"},
{Opt_debug, "debug"},
{Opt_oldalloc, "oldalloc"},
{Opt_orlov, "orlov"},
{Opt_nobh, "nobh"},
{Opt_user_xattr, "user_xattr"},
{Opt_nouser_xattr, "nouser_xattr"},
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_xip, "xip"},
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
{Opt_grpquota, "grpquota"},
{Opt_ignore, "noquota"},
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
{Opt_quota, "quota"},
{Opt_usrquota, "usrquota"},
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
{Opt_reservation, "reservation"},
{Opt_noreservation, "noreservation"},
{Opt_err, NULL}
};
static int parse_options(char *options, struct super_block *sb)
{
char *p;
struct ext2_sb_info *sbi = EXT2_SB(sb);
substring_t args[MAX_OPT_ARGS];
int option;
if (!options)
return 1;
while ((p = strsep (&options, ",")) != NULL) {
int token;
if (!*p)
continue;
token = match_token(p, tokens, args);
switch (token) {
case Opt_bsd_df:
clear_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_minix_df:
set_opt (sbi->s_mount_opt, MINIX_DF);
break;
case Opt_grpid:
set_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_nogrpid:
clear_opt (sbi->s_mount_opt, GRPID);
break;
case Opt_resuid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resuid = option;
break;
case Opt_resgid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resgid = option;
break;
case Opt_sb:
/* handled by get_sb_block() instead of here */
/* *sb_block = match_int(&args[0]); */
break;
case Opt_err_panic:
[PATCH] ext2: errors behaviour fix Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 15:21:50 +07:00
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_RO);
set_opt (sbi->s_mount_opt, ERRORS_PANIC);
break;
case Opt_err_ro:
[PATCH] ext2: errors behaviour fix Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 15:21:50 +07:00
clear_opt (sbi->s_mount_opt, ERRORS_CONT);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_RO);
break;
case Opt_err_cont:
[PATCH] ext2: errors behaviour fix Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 15:21:50 +07:00
clear_opt (sbi->s_mount_opt, ERRORS_RO);
clear_opt (sbi->s_mount_opt, ERRORS_PANIC);
set_opt (sbi->s_mount_opt, ERRORS_CONT);
break;
case Opt_nouid32:
set_opt (sbi->s_mount_opt, NO_UID32);
break;
case Opt_nocheck:
clear_opt (sbi->s_mount_opt, CHECK);
break;
case Opt_debug:
set_opt (sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
set_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_orlov:
clear_opt (sbi->s_mount_opt, OLDALLOC);
break;
case Opt_nobh:
set_opt (sbi->s_mount_opt, NOBH);
break;
#ifdef CONFIG_EXT2_FS_XATTR
case Opt_user_xattr:
set_opt (sbi->s_mount_opt, XATTR_USER);
break;
case Opt_nouser_xattr:
clear_opt (sbi->s_mount_opt, XATTR_USER);
break;
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
ext2_msg(sb, KERN_INFO, "(no)user_xattr options"
"not supported");
break;
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi->s_mount_opt, POSIX_ACL);
break;
case Opt_noacl:
clear_opt(sbi->s_mount_opt, POSIX_ACL);
break;
#else
case Opt_acl:
case Opt_noacl:
ext2_msg(sb, KERN_INFO,
"(no)acl options not supported");
break;
#endif
case Opt_xip:
#ifdef CONFIG_EXT2_FS_XIP
set_opt (sbi->s_mount_opt, XIP);
#else
ext2_msg(sb, KERN_INFO, "xip option not supported");
#endif
break;
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
#if defined(CONFIG_QUOTA)
case Opt_quota:
case Opt_usrquota:
set_opt(sbi->s_mount_opt, USRQUOTA);
break;
case Opt_grpquota:
set_opt(sbi->s_mount_opt, GRPQUOTA);
break;
#else
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
ext2_msg(sb, KERN_INFO,
"quota operations not supported");
[PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts If /etc/mtab is a regular file all of the mount options (of a file system) are written to /etc/mtab by the mount command. The quota tools look there for the quota strings for their operation. If, however, /etc/mtab is a symlink to /proc/mounts (a "good thing" in some environments) the tools don't write anything - they assume the kernel will take care of things. While the quota options are sent down to the kernel via the mount system call and the file system codes handle them properly unfortunately there is no code to echo the quota strings into /proc/mounts and the quota tools fail in the symlink case. The attached patchs modify the EXT[2|3] and JFS codes to add the necessary hooks. The show_options function of each file system in these patches currently deal with only those things that seemed related to quotas; especially in the EXT3 case more can be done (later?). Jan Kara also noted the difficulty in moving these changes above the FS codes responding similarly to myself to Andrew's comment about possible VFS migration. Issue summary: - FS codes have to process the entire string of options anyway. - Only FS codes that use quotas must have a show_options function (for quotas to work properly) however quotas are only used in a small number of FS. - Since most of the quota using FS support other options these FS codes should have the a show_options function to show those options - and the quota echoing becomes virtually negligible. Based on feedback I have modified my patches from the original: JFS a missing patch has been restored to the posting EXT[2|3] and JFS always use the show_options function - Each FS has at least one FS specific option displayed - QUOTA output is under a CONFIG_QUOTA ifdef - a follow-on patch will add a multitude of options for each FS EXT[2|3] and JFS "quota" is treated as "usrquota" EXT3 journalled data check for journalled quota removed EXT[2|3] mount when quota specified but not compiled in - no changes from my original patch. I tested the patch and the codes warn but - still mount. With all due respection I believe the comments otherwise were a - misread of the patch. Please reread/test and comment. XFS patch removed - the XFS team already made the necessary changes EXT3 mixing old and new quotas are handled differently (not purely exclusive) - if old and new quotas for the same type are used together the old type is silently depricated for compatability (e.g. usrquota and usrjquota) - mixing of old and new quotas is an error (e.g. usrjquota and grpquota) Signed-off-by: Mark Bellon <mbellon@mvista.com> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:16:54 +07:00
break;
#endif
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
case Opt_reservation:
set_opt(sbi->s_mount_opt, RESERVATION);
ext2_msg(sb, KERN_INFO, "reservations ON");
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
break;
case Opt_noreservation:
clear_opt(sbi->s_mount_opt, RESERVATION);
ext2_msg(sb, KERN_INFO, "reservations OFF");
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
break;
case Opt_ignore:
break;
default:
return 0;
}
}
return 1;
}
static int ext2_setup_super (struct super_block * sb,
struct ext2_super_block * es,
int read_only)
{
int res = 0;
struct ext2_sb_info *sbi = EXT2_SB(sb);
if (le32_to_cpu(es->s_rev_level) > EXT2_MAX_SUPP_REV) {
ext2_msg(sb, KERN_ERR,
"error: revision level too high, "
"forcing read-only mode");
res = MS_RDONLY;
}
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT2_VALID_FS))
ext2_msg(sb, KERN_WARNING,
"warning: mounting unchecked fs, "
"running e2fsck is recommended");
else if ((sbi->s_mount_state & EXT2_ERROR_FS))
ext2_msg(sb, KERN_WARNING,
"warning: mounting fs with errors, "
"running e2fsck is recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
ext2_msg(sb, KERN_WARNING,
"warning: maximal mount count reached, "
"running e2fsck is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
ext2_msg(sb, KERN_WARNING,
"warning: checktime reached, "
"running e2fsck is recommended");
if (!le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT2_DFL_MAX_MNT_COUNT);
le16_add_cpu(&es->s_mnt_count, 1);
if (test_opt (sb, DEBUG))
ext2_msg(sb, KERN_INFO, "%s, %s, bs=%lu, fs=%lu, gc=%lu, "
"bpg=%lu, ipg=%lu, mo=%04lx]",
EXT2FS_VERSION, EXT2FS_DATE, sb->s_blocksize,
sbi->s_frag_size,
sbi->s_groups_count,
EXT2_BLOCKS_PER_GROUP(sb),
EXT2_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
return res;
}
static int ext2_check_descriptors(struct super_block *sb)
{
int i;
struct ext2_sb_info *sbi = EXT2_SB(sb);
ext2_debug ("Checking group descriptors");
for (i = 0; i < sbi->s_groups_count; i++) {
struct ext2_group_desc *gdp = ext2_get_group_desc(sb, i, NULL);
ext2_fsblk_t first_block = ext2_group_first_block_no(sb, i);
ext2_fsblk_t last_block;
if (i == sbi->s_groups_count - 1)
last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1;
else
last_block = first_block +
(EXT2_BLOCKS_PER_GROUP(sb) - 1);
if (le32_to_cpu(gdp->bg_block_bitmap) < first_block ||
le32_to_cpu(gdp->bg_block_bitmap) > last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Block bitmap for group %d"
" not in group (block %lu)!",
i, (unsigned long) le32_to_cpu(gdp->bg_block_bitmap));
return 0;
}
if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block ||
le32_to_cpu(gdp->bg_inode_bitmap) > last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Inode bitmap for group %d"
" not in group (block %lu)!",
i, (unsigned long) le32_to_cpu(gdp->bg_inode_bitmap));
return 0;
}
if (le32_to_cpu(gdp->bg_inode_table) < first_block ||
le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 >
last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Inode table for group %d"
" not in group (block %lu)!",
i, (unsigned long) le32_to_cpu(gdp->bg_inode_table));
return 0;
}
}
return 1;
}
/*
* Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
* We need to be 1 filesystem block less than the 2^32 sector limit.
*/
static loff_t ext2_max_size(int bits)
{
loff_t res = EXT2_NDIR_BLOCKS;
int meta_blocks;
loff_t upper_limit;
/* This is calculated to be the largest file size for a
* dense, file such that the total number of
* sectors in the file, including data and all indirect blocks,
* does not exceed 2^32 -1
* __u32 i_blocks representing the total number of
* 512 bytes blocks of the file
*/
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
upper_limit >>= (bits - 9);
/* indirect blocks */
meta_blocks = 1;
/* double indirect blocks */
meta_blocks += 1 + (1LL << (bits-2));
/* tripple indirect blocks */
meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2)));
upper_limit -= meta_blocks;
upper_limit <<= bits;
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
res += 1LL << (3*(bits-2));
res <<= bits;
if (res > upper_limit)
res = upper_limit;
if (res > MAX_LFS_FILESIZE)
res = MAX_LFS_FILESIZE;
return res;
}
static unsigned long descriptor_loc(struct super_block *sb,
unsigned long logic_sb_block,
int nr)
{
struct ext2_sb_info *sbi = EXT2_SB(sb);
unsigned long bg, first_meta_bg;
int has_super = 0;
first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
if (!EXT2_HAS_INCOMPAT_FEATURE(sb, EXT2_FEATURE_INCOMPAT_META_BG) ||
nr < first_meta_bg)
return (logic_sb_block + nr + 1);
bg = sbi->s_desc_per_block * nr;
if (ext2_bg_has_super(sb, bg))
has_super = 1;
return ext2_group_first_block_no(sb, bg) + has_super;
}
static int ext2_fill_super(struct super_block *sb, void *data, int silent)
{
struct buffer_head * bh;
struct ext2_sb_info * sbi;
struct ext2_super_block * es;
struct inode *root;
unsigned long block;
unsigned long sb_block = get_sb_block(&data);
unsigned long logic_sb_block;
unsigned long offset = 0;
unsigned long def_mount_opts;
long ret = -EINVAL;
int blocksize = BLOCK_SIZE;
int db_count;
int i, j;
__le32 features;
int err;
err = -ENOMEM;
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
goto failed_unlock;
sbi->s_blockgroup_lock =
kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
if (!sbi->s_blockgroup_lock) {
kfree(sbi);
goto failed_unlock;
}
sb->s_fs_info = sbi;
sbi->s_sb_block = sb_block;
spin_lock_init(&sbi->s_lock);
/*
* See what the current blocksize for the device is, and
* use that as the blocksize. Otherwise (or if the blocksize
* is smaller than the default) use the default.
* This is important for devices that have a hardware
* sectorsize that is larger than the default.
*/
blocksize = sb_min_blocksize(sb, BLOCK_SIZE);
if (!blocksize) {
ext2_msg(sb, KERN_ERR, "error: unable to set blocksize");
goto failed_sbi;
}
/*
* If the superblock doesn't start on a hardware sector boundary,
* calculate the offset.
*/
if (blocksize != BLOCK_SIZE) {
logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize;
offset = (sb_block*BLOCK_SIZE) % blocksize;
} else {
logic_sb_block = sb_block;
}
if (!(bh = sb_bread(sb, logic_sb_block))) {
ext2_msg(sb, KERN_ERR, "error: unable to read superblock");
goto failed_sbi;
}
/*
* Note: s_es must be initialized as soon as possible because
* some ext2 macro-instructions depend on its value
*/
es = (struct ext2_super_block *) (((char *)bh->b_data) + offset);
sbi->s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT2_SUPER_MAGIC)
goto cantfind_ext2;
/* Set defaults before we parse the mount options */
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (def_mount_opts & EXT2_DEFM_DEBUG)
set_opt(sbi->s_mount_opt, DEBUG);
if (def_mount_opts & EXT2_DEFM_BSDGROUPS)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT2_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
#ifdef CONFIG_EXT2_FS_XATTR
if (def_mount_opts & EXT2_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
#ifdef CONFIG_EXT2_FS_POSIX_ACL
if (def_mount_opts & EXT2_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_PANIC)
set_opt(sbi->s_mount_opt, ERRORS_PANIC);
else if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_CONTINUE)
[PATCH] ext2: errors behaviour fix Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 15:21:50 +07:00
set_opt(sbi->s_mount_opt, ERRORS_CONT);
else
set_opt(sbi->s_mount_opt, ERRORS_RO);
sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
set_opt(sbi->s_mount_opt, RESERVATION);
if (!parse_options((char *) data, sb))
goto failed_mount;
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ?
MS_POSIXACL : 0);
ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
EXT2_MOUNT_XIP if not */
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_INCOMPAT_FEATURE(sb, ~0U)))
ext2_msg(sb, KERN_WARNING,
"warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
features = EXT2_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP);
if (features) {
ext2_msg(sb, KERN_ERR, "error: couldn't mount because of "
"unsupported optional features (%x)",
le32_to_cpu(features));
goto failed_mount;
}
if (!(sb->s_flags & MS_RDONLY) &&
(features = EXT2_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))){
ext2_msg(sb, KERN_ERR, "error: couldn't mount RDWR because of "
"unsupported optional features (%x)",
le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
if (ext2_use_xip(sb) && blocksize != PAGE_SIZE) {
if (!silent)
ext2_msg(sb, KERN_ERR,
"error: unsupported blocksize for xip");
goto failed_mount;
}
/* If the blocksize doesn't match, re-read the thing.. */
if (sb->s_blocksize != blocksize) {
brelse(bh);
if (!sb_set_blocksize(sb, blocksize)) {
ext2_msg(sb, KERN_ERR,
"error: bad blocksize %d", blocksize);
goto failed_sbi;
}
logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize;
offset = (sb_block*BLOCK_SIZE) % blocksize;
bh = sb_bread(sb, logic_sb_block);
if(!bh) {
ext2_msg(sb, KERN_ERR, "error: couldn't read"
"superblock on 2nd try");
goto failed_sbi;
}
es = (struct ext2_super_block *) (((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT2_SUPER_MAGIC)) {
ext2_msg(sb, KERN_ERR, "error: magic mismatch");
goto failed_mount;
}
}
sb->s_maxbytes = ext2_max_size(sb->s_blocksize_bits);
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV) {
sbi->s_inode_size = EXT2_GOOD_OLD_INODE_SIZE;
sbi->s_first_ino = EXT2_GOOD_OLD_FIRST_INO;
} else {
sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
if ((sbi->s_inode_size < EXT2_GOOD_OLD_INODE_SIZE) ||
!is_power_of_2(sbi->s_inode_size) ||
(sbi->s_inode_size > blocksize)) {
ext2_msg(sb, KERN_ERR,
"error: unsupported inode size: %d",
sbi->s_inode_size);
goto failed_mount;
}
}
sbi->s_frag_size = EXT2_MIN_FRAG_SIZE <<
le32_to_cpu(es->s_log_frag_size);
if (sbi->s_frag_size == 0)
goto cantfind_ext2;
sbi->s_frags_per_block = sb->s_blocksize / sbi->s_frag_size;
sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group);
sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
if (EXT2_INODE_SIZE(sb) == 0)
goto cantfind_ext2;
sbi->s_inodes_per_block = sb->s_blocksize / EXT2_INODE_SIZE(sb);
if (sbi->s_inodes_per_block == 0 || sbi->s_inodes_per_group == 0)
goto cantfind_ext2;
sbi->s_itb_per_group = sbi->s_inodes_per_group /
sbi->s_inodes_per_block;
sbi->s_desc_per_block = sb->s_blocksize /
sizeof (struct ext2_group_desc);
sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits =
ilog2 (EXT2_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits =
ilog2 (EXT2_DESC_PER_BLOCK(sb));
if (sb->s_magic != EXT2_SUPER_MAGIC)
goto cantfind_ext2;
if (sb->s_blocksize != bh->b_size) {
if (!silent)
ext2_msg(sb, KERN_ERR, "error: unsupported blocksize");
goto failed_mount;
}
if (sb->s_blocksize != sbi->s_frag_size) {
ext2_msg(sb, KERN_ERR,
"error: fragsize %lu != blocksize %lu"
"(not supported yet)",
sbi->s_frag_size, sb->s_blocksize);
goto failed_mount;
}
if (sbi->s_blocks_per_group > sb->s_blocksize * 8) {
ext2_msg(sb, KERN_ERR,
"error: #blocks per group too big: %lu",
sbi->s_blocks_per_group);
goto failed_mount;
}
if (sbi->s_frags_per_group > sb->s_blocksize * 8) {
ext2_msg(sb, KERN_ERR,
"error: #fragments per group too big: %lu",
sbi->s_frags_per_group);
goto failed_mount;
}
if (sbi->s_inodes_per_group > sb->s_blocksize * 8) {
ext2_msg(sb, KERN_ERR,
"error: #inodes per group too big: %lu",
sbi->s_inodes_per_group);
goto failed_mount;
}
if (EXT2_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext2;
sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
le32_to_cpu(es->s_first_data_block) - 1)
/ EXT2_BLOCKS_PER_GROUP(sb)) + 1;
db_count = (sbi->s_groups_count + EXT2_DESC_PER_BLOCK(sb) - 1) /
EXT2_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc (db_count * sizeof (struct buffer_head *), GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
ext2_msg(sb, KERN_ERR, "error: not enough memory");
goto failed_mount;
}
bgl_lock_init(sbi->s_blockgroup_lock);
2007-07-19 15:49:03 +07:00
sbi->s_debts = kcalloc(sbi->s_groups_count, sizeof(*sbi->s_debts), GFP_KERNEL);
if (!sbi->s_debts) {
ext2_msg(sb, KERN_ERR, "error: not enough memory");
goto failed_mount_group_desc;
}
for (i = 0; i < db_count; i++) {
block = descriptor_loc(sb, logic_sb_block, i);
sbi->s_group_desc[i] = sb_bread(sb, block);
if (!sbi->s_group_desc[i]) {
for (j = 0; j < i; j++)
brelse (sbi->s_group_desc[j]);
ext2_msg(sb, KERN_ERR,
"error: unable to read group descriptors");
goto failed_mount_group_desc;
}
}
if (!ext2_check_descriptors (sb)) {
ext2_msg(sb, KERN_ERR, "group descriptors corrupted");
goto failed_mount2;
}
sbi->s_gdb_count = db_count;
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
/* per fileystem reservation list head & lock */
spin_lock_init(&sbi->s_rsv_window_lock);
sbi->s_rsv_window_root = RB_ROOT;
/*
* Add a single, static dummy reservation to the start of the
* reservation window list --- it gives us a placeholder for
* append-at-start-of-list which makes the allocation logic
* _much_ simpler.
*/
sbi->s_rsv_window_head.rsv_start = EXT2_RESERVE_WINDOW_NOT_ALLOCATED;
sbi->s_rsv_window_head.rsv_end = EXT2_RESERVE_WINDOW_NOT_ALLOCATED;
sbi->s_rsv_window_head.rsv_alloc_hit = 0;
sbi->s_rsv_window_head.rsv_goal_size = 0;
ext2_rsv_window_add(sb, &sbi->s_rsv_window_head);
err = percpu_counter_init(&sbi->s_freeblocks_counter,
ext2_count_free_blocks(sb));
if (!err) {
err = percpu_counter_init(&sbi->s_freeinodes_counter,
ext2_count_free_inodes(sb));
}
if (!err) {
err = percpu_counter_init(&sbi->s_dirs_counter,
ext2_count_dirs(sb));
}
if (err) {
ext2_msg(sb, KERN_ERR, "error: insufficient memory");
goto failed_mount3;
}
/*
* set up enough so that it can read an inode
*/
sb->s_op = &ext2_sops;
sb->s_export_op = &ext2_export_ops;
sb->s_xattr = ext2_xattr_handlers;
#ifdef CONFIG_QUOTA
sb->dq_op = &dquot_operations;
sb->s_qcop = &dquot_quotactl_ops;
#endif
root = ext2_iget(sb, EXT2_ROOT_INO);
if (IS_ERR(root)) {
ret = PTR_ERR(root);
goto failed_mount3;
}
if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
iput(root);
ext2_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck");
goto failed_mount3;
}
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
iput(root);
ext2_msg(sb, KERN_ERR, "error: get root inode failed");
ret = -ENOMEM;
goto failed_mount3;
}
if (EXT2_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL))
ext2_msg(sb, KERN_WARNING,
"warning: mounting ext3 filesystem as ext2");
if (ext2_setup_super (sb, es, sb->s_flags & MS_RDONLY))
sb->s_flags |= MS_RDONLY;
ext2_write_super(sb);
return 0;
cantfind_ext2:
if (!silent)
ext2_msg(sb, KERN_ERR,
"error: can't find an ext2 filesystem on dev %s.",
sb->s_id);
goto failed_mount;
failed_mount3:
percpu_counter_destroy(&sbi->s_freeblocks_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
failed_mount_group_desc:
kfree(sbi->s_group_desc);
kfree(sbi->s_debts);
failed_mount:
brelse(bh);
failed_sbi:
sb->s_fs_info = NULL;
kfree(sbi->s_blockgroup_lock);
kfree(sbi);
failed_unlock:
return ret;
}
static void ext2_clear_super_error(struct super_block *sb)
{
struct buffer_head *sbh = EXT2_SB(sb)->s_sbh;
if (buffer_write_io_error(sbh)) {
/*
* Oh, dear. A previous attempt to write the
* superblock failed. This could happen because the
* USB device was yanked out. Or it could happen to
* be a transient write error and maybe the block will
* be remapped. Nothing we can do but to retry the
* write and hope for the best.
*/
ext2_msg(sb, KERN_ERR,
"previous I/O error to superblock detected\n");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
}
}
static void ext2_sync_super(struct super_block *sb, struct ext2_super_block *es,
int wait)
{
ext2_clear_super_error(sb);
spin_lock(&EXT2_SB(sb)->s_lock);
es->s_free_blocks_count = cpu_to_le32(ext2_count_free_blocks(sb));
es->s_free_inodes_count = cpu_to_le32(ext2_count_free_inodes(sb));
es->s_wtime = cpu_to_le32(get_seconds());
/* unlock before we do IO */
spin_unlock(&EXT2_SB(sb)->s_lock);
mark_buffer_dirty(EXT2_SB(sb)->s_sbh);
if (wait)
sync_dirty_buffer(EXT2_SB(sb)->s_sbh);
sb->s_dirt = 0;
}
/*
* In the second extended file system, it is not necessary to
* write the super block since we use a mapping of the
* disk super block in a buffer.
*
* However, this function is still used to set the fs valid
* flags to 0. We need to set this flag to 0 since the fs
* may have been checked while mounted and e2fsck may have
* set s_state to EXT2_VALID_FS after some corrections.
*/
static int ext2_sync_fs(struct super_block *sb, int wait)
{
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = EXT2_SB(sb)->s_es;
spin_lock(&sbi->s_lock);
if (es->s_state & cpu_to_le16(EXT2_VALID_FS)) {
ext2_debug("setting valid to 0\n");
es->s_state &= cpu_to_le16(~EXT2_VALID_FS);
}
spin_unlock(&sbi->s_lock);
ext2_sync_super(sb, es, wait);
return 0;
}
void ext2_write_super(struct super_block *sb)
{
if (!(sb->s_flags & MS_RDONLY))
ext2_sync_fs(sb, 1);
else
sb->s_dirt = 0;
}
static int ext2_remount (struct super_block * sb, int * flags, char * data)
{
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
unsigned long old_mount_opt = sbi->s_mount_opt;
struct ext2_mount_options old_opts;
unsigned long old_sb_flags;
int err;
spin_lock(&sbi->s_lock);
/* Store the old options */
old_sb_flags = sb->s_flags;
old_opts.s_mount_opt = sbi->s_mount_opt;
old_opts.s_resuid = sbi->s_resuid;
old_opts.s_resgid = sbi->s_resgid;
/*
* Allow the "check" option to be passed as a remount option.
*/
if (!parse_options(data, sb)) {
err = -EINVAL;
goto restore_opts;
}
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
EXT2_MOUNT_XIP if not */
if ((ext2_use_xip(sb)) && (sb->s_blocksize != PAGE_SIZE)) {
ext2_msg(sb, KERN_WARNING,
"warning: unsupported blocksize for xip");
err = -EINVAL;
goto restore_opts;
}
es = sbi->s_es;
if ((sbi->s_mount_opt ^ old_mount_opt) & EXT2_MOUNT_XIP) {
ext2_msg(sb, KERN_WARNING, "warning: refusing change of "
"xip flag with busy inodes while remounting");
ext2/xip: refuse to change xip flag during remount with busy inodes For a reason that I was unable to understand in three months of debugging, mount ext2 -o remount stopped working properly when remounting from regular operation to xip, or the other way around. According to a git bisect search, the problem was introduced with the VM_MIXEDMAP/PTE_SPECIAL rework in the vm: commit 70688e4dd1647f0ceb502bbd5964fa344c5eb411 Author: Nick Piggin <npiggin@suse.de> Date: Mon Apr 28 02:13:02 2008 -0700 xip: support non-struct page backed memory In the failing scenario, the filesystem is mounted read only via root= kernel parameter on s390x. During remount (in rc.sysinit), the inodes of the bash binary and its libraries are busy and cannot be invalidated (the bash which is running rc.sysinit resides on subject filesystem). Afterwards, another bash process (running ifup-eth) recurses into a subshell, runs dup_mm (via fork). Some of the mappings in this bash process were created from inodes that could not be invalidated during remount. Both parent and child process crash some time later due to inconsistencies in their address spaces. The issue seems to be timing sensitive, various attempts to recreate it have failed. This patch refuses to change the xip flag during remount in case some inodes cannot be invalidated. This patch keeps users from running into that issue. [akpm@linux-foundation.org: cleanup] Signed-off-by: Carsten Otte <cotte@de.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-12 04:04:37 +07:00
sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
}
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
spin_unlock(&sbi->s_lock);
return 0;
}
if (*flags & MS_RDONLY) {
if (le16_to_cpu(es->s_state) & EXT2_VALID_FS ||
!(sbi->s_mount_state & EXT2_VALID_FS)) {
spin_unlock(&sbi->s_lock);
return 0;
}
/*
* OK, we are remounting a valid rw partition rdonly, so set
* the rdonly flag and then mark the partition as valid again.
*/
es->s_state = cpu_to_le16(sbi->s_mount_state);
es->s_mtime = cpu_to_le32(get_seconds());
spin_unlock(&sbi->s_lock);
err = dquot_suspend(sb, -1);
if (err < 0) {
spin_lock(&sbi->s_lock);
goto restore_opts;
}
ext2_sync_super(sb, es, 1);
} else {
__le32 ret = EXT2_HAS_RO_COMPAT_FEATURE(sb,
~EXT2_FEATURE_RO_COMPAT_SUPP);
if (ret) {
ext2_msg(sb, KERN_WARNING,
"warning: couldn't remount RDWR because of "
"unsupported optional features (%x).",
le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
/*
* Mounting a RDONLY partition read-write, so reread and
* store the current valid flag. (It may have been changed
* by e2fsck since we originally mounted the partition.)
*/
sbi->s_mount_state = le16_to_cpu(es->s_state);
if (!ext2_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
spin_unlock(&sbi->s_lock);
ext2_write_super(sb);
dquot_resume(sb, -1);
}
return 0;
restore_opts:
sbi->s_mount_opt = old_opts.s_mount_opt;
sbi->s_resuid = old_opts.s_resuid;
sbi->s_resgid = old_opts.s_resgid;
sb->s_flags = old_sb_flags;
spin_unlock(&sbi->s_lock);
return err;
}
static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf)
{
struct super_block *sb = dentry->d_sb;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
u64 fsid;
spin_lock(&sbi->s_lock);
if (test_opt (sb, MINIX_DF))
sbi->s_overhead_last = 0;
else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) {
unsigned long i, overhead = 0;
smp_rmb();
/*
* Compute the overhead (FS structures). This is constant
* for a given filesystem unless the number of block groups
* changes so we cache the previous value until it does.
*/
/*
* All of the blocks before first_data_block are
* overhead
*/
overhead = le32_to_cpu(es->s_first_data_block);
/*
* Add the overhead attributed to the superblock and
* block group descriptors. If the sparse superblocks
* feature is turned on, then not all groups have this.
*/
for (i = 0; i < sbi->s_groups_count; i++)
overhead += ext2_bg_has_super(sb, i) +
ext2_bg_num_gdb(sb, i);
/*
* Every block group has an inode bitmap, a block
* bitmap, and an inode table.
*/
overhead += (sbi->s_groups_count *
(2 + sbi->s_itb_per_group));
sbi->s_overhead_last = overhead;
smp_wmb();
sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count);
}
buf->f_type = EXT2_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last;
buf->f_bfree = ext2_count_free_blocks(sb);
es->s_free_blocks_count = cpu_to_le32(buf->f_bfree);
buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count);
if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count))
buf->f_bavail = 0;
buf->f_files = le32_to_cpu(es->s_inodes_count);
buf->f_ffree = ext2_count_free_inodes(sb);
es->s_free_inodes_count = cpu_to_le32(buf->f_ffree);
buf->f_namelen = EXT2_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
spin_unlock(&sbi->s_lock);
return 0;
}
static struct dentry *ext2_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
return mount_bdev(fs_type, flags, dev_name, data, ext2_fill_super);
}
#ifdef CONFIG_QUOTA
/* Read data from quotafile - avoid pagecache and such because we cannot afford
* acquiring the locks... As quota files are never truncated and quota code
* itself serializes the operations (and no one else should touch the files)
* we don't have to be afraid of races */
static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
sector_t blk = off >> EXT2_BLOCK_SIZE_BITS(sb);
int err = 0;
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t toread;
struct buffer_head tmp_bh;
struct buffer_head *bh;
loff_t i_size = i_size_read(inode);
if (off > i_size)
return 0;
if (off+len > i_size)
len = i_size-off;
toread = len;
while (toread > 0) {
tocopy = sb->s_blocksize - offset < toread ?
sb->s_blocksize - offset : toread;
tmp_bh.b_state = 0;
tmp_bh.b_size = sb->s_blocksize;
err = ext2_get_block(inode, blk, &tmp_bh, 0);
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
if (err < 0)
return err;
if (!buffer_mapped(&tmp_bh)) /* A hole? */
memset(data, 0, tocopy);
else {
bh = sb_bread(sb, tmp_bh.b_blocknr);
if (!bh)
return -EIO;
memcpy(data, bh->b_data+offset, tocopy);
brelse(bh);
}
offset = 0;
toread -= tocopy;
data += tocopy;
blk++;
}
return len;
}
/* Write to quotafile */
static ssize_t ext2_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
sector_t blk = off >> EXT2_BLOCK_SIZE_BITS(sb);
int err = 0;
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t towrite = len;
struct buffer_head tmp_bh;
struct buffer_head *bh;
2006-07-03 14:25:20 +07:00
mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
while (towrite > 0) {
tocopy = sb->s_blocksize - offset < towrite ?
sb->s_blocksize - offset : towrite;
tmp_bh.b_state = 0;
err = ext2_get_block(inode, blk, &tmp_bh, 1);
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:46 +07:00
if (err < 0)
goto out;
if (offset || tocopy != EXT2_BLOCK_SIZE(sb))
bh = sb_bread(sb, tmp_bh.b_blocknr);
else
bh = sb_getblk(sb, tmp_bh.b_blocknr);
if (!bh) {
err = -EIO;
goto out;
}
lock_buffer(bh);
memcpy(bh->b_data+offset, data, tocopy);
flush_dcache_page(bh->b_page);
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
unlock_buffer(bh);
brelse(bh);
offset = 0;
towrite -= tocopy;
data += tocopy;
blk++;
}
out:
if (len == towrite) {
mutex_unlock(&inode->i_mutex);
return err;
}
if (inode->i_size < off+len-towrite)
i_size_write(inode, off+len-towrite);
inode->i_version++;
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
mark_inode_dirty(inode);
mutex_unlock(&inode->i_mutex);
return len - towrite;
}
#endif
static struct file_system_type ext2_fs_type = {
.owner = THIS_MODULE,
.name = "ext2",
.mount = ext2_mount,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
static int __init init_ext2_fs(void)
{
int err = init_ext2_xattr();
if (err)
return err;
err = init_inodecache();
if (err)
goto out1;
err = register_filesystem(&ext2_fs_type);
if (err)
goto out;
return 0;
out:
destroy_inodecache();
out1:
exit_ext2_xattr();
return err;
}
static void __exit exit_ext2_fs(void)
{
unregister_filesystem(&ext2_fs_type);
destroy_inodecache();
exit_ext2_xattr();
}
module_init(init_ext2_fs)
module_exit(exit_ext2_fs)