linux_dsm_epyc7002/arch/x86/lib/atomic64_386_32.S

188 lines
2.3 KiB
ArmAsm
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
/*
* atomic64_t for 386/486
*
* Copyright © 2010 Luca Barbieri
*/
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
/* if you want SMP support, implement these with real spinlocks */
.macro LOCK reg
x86/debug: Remove perpetually broken, unmaintainable dwarf annotations So the dwarf2 annotations in low level assembly code have become an increasing hindrance: unreadable, messy macros mixed into some of the most security sensitive code paths of the Linux kernel. These debug info annotations don't even buy the upstream kernel anything: dwarf driven stack unwinding has caused problems in the past so it's out of tree, and the upstream kernel only uses the much more robust framepointers based stack unwinding method. In addition to that there's a steady, slow bitrot going on with these annotations, requiring frequent fixups. There's no tooling and no functionality upstream that keeps it correct. So burn down the sick forest, allowing new, healthier growth: 27 files changed, 350 insertions(+), 1101 deletions(-) Someone who has the willingness and time to do this properly can attempt to reintroduce dwarf debuginfo in x86 assembly code plus dwarf unwinding from first principles, with the following conditions: - it should be maximally readable, and maximally low-key to 'ordinary' code reading and maintenance. - find a build time method to insert dwarf annotations automatically in the most common cases, for pop/push instructions that manipulate the stack pointer. This could be done for example via a preprocessing step that just looks for common patterns - plus special annotations for the few cases where we want to depart from the default. We have hundreds of CFI annotations, so automating most of that makes sense. - it should come with build tooling checks that ensure that CFI annotations are sensible. We've seen such efforts from the framepointer side, and there's no reason it couldn't be done on the dwarf side. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-28 17:21:47 +07:00
pushfl
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
cli
.endm
.macro UNLOCK reg
x86/debug: Remove perpetually broken, unmaintainable dwarf annotations So the dwarf2 annotations in low level assembly code have become an increasing hindrance: unreadable, messy macros mixed into some of the most security sensitive code paths of the Linux kernel. These debug info annotations don't even buy the upstream kernel anything: dwarf driven stack unwinding has caused problems in the past so it's out of tree, and the upstream kernel only uses the much more robust framepointers based stack unwinding method. In addition to that there's a steady, slow bitrot going on with these annotations, requiring frequent fixups. There's no tooling and no functionality upstream that keeps it correct. So burn down the sick forest, allowing new, healthier growth: 27 files changed, 350 insertions(+), 1101 deletions(-) Someone who has the willingness and time to do this properly can attempt to reintroduce dwarf debuginfo in x86 assembly code plus dwarf unwinding from first principles, with the following conditions: - it should be maximally readable, and maximally low-key to 'ordinary' code reading and maintenance. - find a build time method to insert dwarf annotations automatically in the most common cases, for pop/push instructions that manipulate the stack pointer. This could be done for example via a preprocessing step that just looks for common patterns - plus special annotations for the few cases where we want to depart from the default. We have hundreds of CFI annotations, so automating most of that makes sense. - it should come with build tooling checks that ensure that CFI annotations are sensible. We've seen such efforts from the framepointer side, and there's no reason it couldn't be done on the dwarf side. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-28 17:21:47 +07:00
popfl
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
.endm
#define BEGIN(op) \
.macro endp; \
SYM_FUNC_END(atomic64_##op##_386); \
.purgem endp; \
.endm; \
SYM_FUNC_START(atomic64_##op##_386); \
LOCK v;
#define ENDP endp
#define RET \
UNLOCK v; \
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
ret
#define RET_ENDP \
RET; \
ENDP
#define v %ecx
BEGIN(read)
movl (v), %eax
movl 4(v), %edx
RET_ENDP
#undef v
#define v %esi
BEGIN(set)
movl %ebx, (v)
movl %ecx, 4(v)
RET_ENDP
#undef v
#define v %esi
BEGIN(xchg)
movl (v), %eax
movl 4(v), %edx
movl %ebx, (v)
movl %ecx, 4(v)
RET_ENDP
#undef v
#define v %ecx
BEGIN(add)
addl %eax, (v)
adcl %edx, 4(v)
RET_ENDP
#undef v
#define v %ecx
BEGIN(add_return)
addl (v), %eax
adcl 4(v), %edx
movl %eax, (v)
movl %edx, 4(v)
RET_ENDP
#undef v
#define v %ecx
BEGIN(sub)
subl %eax, (v)
sbbl %edx, 4(v)
RET_ENDP
#undef v
#define v %ecx
BEGIN(sub_return)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
negl %edx
negl %eax
sbbl $0, %edx
addl (v), %eax
adcl 4(v), %edx
movl %eax, (v)
movl %edx, 4(v)
RET_ENDP
#undef v
#define v %esi
BEGIN(inc)
addl $1, (v)
adcl $0, 4(v)
RET_ENDP
#undef v
#define v %esi
BEGIN(inc_return)
movl (v), %eax
movl 4(v), %edx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
addl $1, %eax
adcl $0, %edx
movl %eax, (v)
movl %edx, 4(v)
RET_ENDP
#undef v
#define v %esi
BEGIN(dec)
subl $1, (v)
sbbl $0, 4(v)
RET_ENDP
#undef v
#define v %esi
BEGIN(dec_return)
movl (v), %eax
movl 4(v), %edx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
subl $1, %eax
sbbl $0, %edx
movl %eax, (v)
movl %edx, 4(v)
RET_ENDP
#undef v
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
#define v %esi
BEGIN(add_unless)
addl %eax, %ecx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
adcl %edx, %edi
addl (v), %eax
adcl 4(v), %edx
cmpl %eax, %ecx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
je 3f
1:
movl %eax, (v)
movl %edx, 4(v)
movl $1, %eax
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
2:
RET
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
3:
cmpl %edx, %edi
jne 1b
xorl %eax, %eax
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
jmp 2b
ENDP
#undef v
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
#define v %esi
BEGIN(inc_not_zero)
movl (v), %eax
movl 4(v), %edx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
testl %eax, %eax
je 3f
1:
addl $1, %eax
adcl $0, %edx
movl %eax, (v)
movl %edx, 4(v)
movl $1, %eax
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
2:
RET
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
3:
testl %edx, %edx
jne 1b
jmp 2b
ENDP
#undef v
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
#define v %esi
BEGIN(dec_if_positive)
movl (v), %eax
movl 4(v), %edx
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
subl $1, %eax
sbbl $0, %edx
js 1f
movl %eax, (v)
movl %edx, 4(v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 16:54:25 +07:00
1:
RET_ENDP
#undef v