linux_dsm_epyc7002/include/linux/pm_domain.h

322 lines
9.4 KiB
C
Raw Normal View History

/*
* pm_domain.h - Definitions and headers related to device power domains.
*
* Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
*
* This file is released under the GPLv2.
*/
#ifndef _LINUX_PM_DOMAIN_H
#define _LINUX_PM_DOMAIN_H
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/notifier.h>
PM / Domains: Support IRQ safe PM domains Generic Power Domains currently support turning on/off only in process context. This prevents the usage of PM domains for domains that could be powered on/off in a context where IRQs are disabled. Many such domains exist today and do not get powered off, when the IRQ safe devices in that domain are powered off, because of this limitation. However, not all domains can operate in IRQ safe contexts. Genpd therefore, has to support both cases where the domain may or may not operate in IRQ safe contexts. Configuring genpd to use an appropriate lock for that domain, would allow domains that have IRQ safe devices to runtime suspend and resume, in atomic context. To achieve domain specific locking, set the domain's ->flag to GENPD_FLAG_IRQ_SAFE while defining the domain. This indicates that genpd should use a spinlock instead of a mutex for locking the domain. Locking is abstracted through genpd_lock() and genpd_unlock() functions that use the flag to determine the appropriate lock to be used for that domain. Domains that have lower latency to suspend and resume and can operate with IRQs disabled may now be able to save power, when the component devices and sub-domains are idle at runtime. The restriction this imposes on the domain hierarchy is that non-IRQ safe domains may not have IRQ-safe subdomains, but IRQ safe domains may have IRQ safe and non-IRQ safe subdomains and devices. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-15 00:47:55 +07:00
#include <linux/spinlock.h>
/* Defines used for the flags field in the struct generic_pm_domain */
#define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */
#define GENPD_FLAG_IRQ_SAFE (1U << 1) /* PM domain operates in atomic */
#define GENPD_FLAG_ALWAYS_ON (1U << 2) /* PM domain is always powered on */
#define GENPD_FLAG_ACTIVE_WAKEUP (1U << 3) /* Keep devices active if wakeup */
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
GPD_STATE_POWER_OFF, /* PM domain is off */
};
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 03:13:19 +07:00
struct dev_power_governor {
bool (*power_down_ok)(struct dev_pm_domain *domain);
bool (*suspend_ok)(struct device *dev);
};
struct gpd_dev_ops {
int (*start)(struct device *dev);
int (*stop)(struct device *dev);
};
PM / Domains: Support for multiple states Some hardware (eg. OMAP), has the ability to enter different low power modes for a given power domain. This allows for more fine grained control over the power state of the platform. As a typical example, some registers of the hardware may be implemented with retention flip-flops and be able to retain their state at lower voltages allowing for faster on/off latencies and an increased window of opportunity to enter an intermediate low power state other than "off" When trying to set a power domain to off, the genpd governor will choose the deepest state that will respect the qos constraints of all the devices and sub-domains on the power domain. The state chosen by the governor is saved in the "state_idx" field of the generic_pm_domain structure and shall be used by the power_off and power_on callbacks to perform the necessary actions to set the power domain into (and out of) the state indicated by state_idx. States must be declared in ascending order from shallowest to deepest, deepest meaning the state which takes longer to enter and exit. For platforms that don't declare any states, a single a single "off" state is used. Once all platforms are converted to use the state array, the legacy on/off latencies will be removed. [ Lina: Modified genpd state initialization and remove use of save_state_latency_ns in genpd timing data ] Suggested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Axel Haslam <ahaslam+renesas@baylibre.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 17:10:51 +07:00
struct genpd_power_state {
s64 power_off_latency_ns;
s64 power_on_latency_ns;
s64 residency_ns;
struct fwnode_handle *fwnode;
ktime_t idle_time;
PM / Domains: Support for multiple states Some hardware (eg. OMAP), has the ability to enter different low power modes for a given power domain. This allows for more fine grained control over the power state of the platform. As a typical example, some registers of the hardware may be implemented with retention flip-flops and be able to retain their state at lower voltages allowing for faster on/off latencies and an increased window of opportunity to enter an intermediate low power state other than "off" When trying to set a power domain to off, the genpd governor will choose the deepest state that will respect the qos constraints of all the devices and sub-domains on the power domain. The state chosen by the governor is saved in the "state_idx" field of the generic_pm_domain structure and shall be used by the power_off and power_on callbacks to perform the necessary actions to set the power domain into (and out of) the state indicated by state_idx. States must be declared in ascending order from shallowest to deepest, deepest meaning the state which takes longer to enter and exit. For platforms that don't declare any states, a single a single "off" state is used. Once all platforms are converted to use the state array, the legacy on/off latencies will be removed. [ Lina: Modified genpd state initialization and remove use of save_state_latency_ns in genpd timing data ] Suggested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Axel Haslam <ahaslam+renesas@baylibre.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 17:10:51 +07:00
};
struct genpd_lock_ops;
struct dev_pm_opp;
struct generic_pm_domain {
struct device dev;
struct dev_pm_domain domain; /* PM domain operations */
struct list_head gpd_list_node; /* Node in the global PM domains list */
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-09 04:43:40 +07:00
struct list_head master_links; /* Links with PM domain as a master */
struct list_head slave_links; /* Links with PM domain as a slave */
struct list_head dev_list; /* List of devices */
struct dev_power_governor *gov;
struct work_struct power_off_work;
struct fwnode_handle *provider; /* Identity of the domain provider */
bool has_provider;
const char *name;
atomic_t sd_count; /* Number of subdomains with power "on" */
enum gpd_status status; /* Current state of the domain */
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 03:13:19 +07:00
unsigned int device_count; /* Number of devices */
unsigned int suspended_count; /* System suspend device counter */
unsigned int prepared_count; /* Suspend counter of prepared devices */
PM / Domains: Add support to select performance-state of domains Some platforms have the capability to configure the performance state of PM domains. This patch enhances the genpd core to support such platforms. The performance levels (within the genpd core) are identified by positive integer values, a lower value represents lower performance state. This patch adds a new genpd API, which is called by user drivers (like OPP framework): - int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state); This updates the performance state constraint of the device on its PM domain. On success, the genpd will have its performance state set to a value which is >= "state" passed to this routine. The genpd core calls the genpd->set_performance_state() callback, if implemented, else -ENODEV is returned to the caller. The PM domain drivers need to implement the following callback if they want to support performance states. - int (*set_performance_state)(struct generic_pm_domain *genpd, unsigned int state); This is called internally by the genpd core on several occasions. The genpd core passes the genpd pointer and the aggregate of the performance states of the devices supported by that genpd to this callback. This callback must update the performance state of the genpd (in a platform dependent way). The power domains can avoid supplying above callback, if they don't support setting performance-states. Currently we aren't propagating performance state changes of a subdomain to its masters as we don't have hardware that needs it right now. Over that, the performance states of subdomain and its masters may not have one-to-one mapping and would require additional information. We can get back to this once we have hardware that needs it. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 16:37:23 +07:00
unsigned int performance_state; /* Aggregated max performance state */
int (*power_off)(struct generic_pm_domain *domain);
int (*power_on)(struct generic_pm_domain *domain);
unsigned int (*opp_to_performance_state)(struct generic_pm_domain *genpd,
struct dev_pm_opp *opp);
PM / Domains: Add support to select performance-state of domains Some platforms have the capability to configure the performance state of PM domains. This patch enhances the genpd core to support such platforms. The performance levels (within the genpd core) are identified by positive integer values, a lower value represents lower performance state. This patch adds a new genpd API, which is called by user drivers (like OPP framework): - int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state); This updates the performance state constraint of the device on its PM domain. On success, the genpd will have its performance state set to a value which is >= "state" passed to this routine. The genpd core calls the genpd->set_performance_state() callback, if implemented, else -ENODEV is returned to the caller. The PM domain drivers need to implement the following callback if they want to support performance states. - int (*set_performance_state)(struct generic_pm_domain *genpd, unsigned int state); This is called internally by the genpd core on several occasions. The genpd core passes the genpd pointer and the aggregate of the performance states of the devices supported by that genpd to this callback. This callback must update the performance state of the genpd (in a platform dependent way). The power domains can avoid supplying above callback, if they don't support setting performance-states. Currently we aren't propagating performance state changes of a subdomain to its masters as we don't have hardware that needs it right now. Over that, the performance states of subdomain and its masters may not have one-to-one mapping and would require additional information. We can get back to this once we have hardware that needs it. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 16:37:23 +07:00
int (*set_performance_state)(struct generic_pm_domain *genpd,
unsigned int state);
struct gpd_dev_ops dev_ops;
s64 max_off_time_ns; /* Maximum allowed "suspended" time. */
bool max_off_time_changed;
bool cached_power_down_ok;
int (*attach_dev)(struct generic_pm_domain *domain,
struct device *dev);
void (*detach_dev)(struct generic_pm_domain *domain,
struct device *dev);
unsigned int flags; /* Bit field of configs for genpd */
struct genpd_power_state *states;
PM / Domains: Support for multiple states Some hardware (eg. OMAP), has the ability to enter different low power modes for a given power domain. This allows for more fine grained control over the power state of the platform. As a typical example, some registers of the hardware may be implemented with retention flip-flops and be able to retain their state at lower voltages allowing for faster on/off latencies and an increased window of opportunity to enter an intermediate low power state other than "off" When trying to set a power domain to off, the genpd governor will choose the deepest state that will respect the qos constraints of all the devices and sub-domains on the power domain. The state chosen by the governor is saved in the "state_idx" field of the generic_pm_domain structure and shall be used by the power_off and power_on callbacks to perform the necessary actions to set the power domain into (and out of) the state indicated by state_idx. States must be declared in ascending order from shallowest to deepest, deepest meaning the state which takes longer to enter and exit. For platforms that don't declare any states, a single a single "off" state is used. Once all platforms are converted to use the state array, the legacy on/off latencies will be removed. [ Lina: Modified genpd state initialization and remove use of save_state_latency_ns in genpd timing data ] Suggested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Axel Haslam <ahaslam+renesas@baylibre.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 17:10:51 +07:00
unsigned int state_count; /* number of states */
unsigned int state_idx; /* state that genpd will go to when off */
void *free; /* Free the state that was allocated for default */
ktime_t on_time;
ktime_t accounting_time;
const struct genpd_lock_ops *lock_ops;
PM / Domains: Support IRQ safe PM domains Generic Power Domains currently support turning on/off only in process context. This prevents the usage of PM domains for domains that could be powered on/off in a context where IRQs are disabled. Many such domains exist today and do not get powered off, when the IRQ safe devices in that domain are powered off, because of this limitation. However, not all domains can operate in IRQ safe contexts. Genpd therefore, has to support both cases where the domain may or may not operate in IRQ safe contexts. Configuring genpd to use an appropriate lock for that domain, would allow domains that have IRQ safe devices to runtime suspend and resume, in atomic context. To achieve domain specific locking, set the domain's ->flag to GENPD_FLAG_IRQ_SAFE while defining the domain. This indicates that genpd should use a spinlock instead of a mutex for locking the domain. Locking is abstracted through genpd_lock() and genpd_unlock() functions that use the flag to determine the appropriate lock to be used for that domain. Domains that have lower latency to suspend and resume and can operate with IRQs disabled may now be able to save power, when the component devices and sub-domains are idle at runtime. The restriction this imposes on the domain hierarchy is that non-IRQ safe domains may not have IRQ-safe subdomains, but IRQ safe domains may have IRQ safe and non-IRQ safe subdomains and devices. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-15 00:47:55 +07:00
union {
struct mutex mlock;
struct {
spinlock_t slock;
unsigned long lock_flags;
};
};
PM / Domains: Support for multiple states Some hardware (eg. OMAP), has the ability to enter different low power modes for a given power domain. This allows for more fine grained control over the power state of the platform. As a typical example, some registers of the hardware may be implemented with retention flip-flops and be able to retain their state at lower voltages allowing for faster on/off latencies and an increased window of opportunity to enter an intermediate low power state other than "off" When trying to set a power domain to off, the genpd governor will choose the deepest state that will respect the qos constraints of all the devices and sub-domains on the power domain. The state chosen by the governor is saved in the "state_idx" field of the generic_pm_domain structure and shall be used by the power_off and power_on callbacks to perform the necessary actions to set the power domain into (and out of) the state indicated by state_idx. States must be declared in ascending order from shallowest to deepest, deepest meaning the state which takes longer to enter and exit. For platforms that don't declare any states, a single a single "off" state is used. Once all platforms are converted to use the state array, the legacy on/off latencies will be removed. [ Lina: Modified genpd state initialization and remove use of save_state_latency_ns in genpd timing data ] Suggested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Axel Haslam <ahaslam+renesas@baylibre.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 17:10:51 +07:00
};
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 03:13:19 +07:00
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
{
return container_of(pd, struct generic_pm_domain, domain);
}
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-09 04:43:40 +07:00
struct gpd_link {
struct generic_pm_domain *master;
struct list_head master_node;
struct generic_pm_domain *slave;
struct list_head slave_node;
};
struct gpd_timing_data {
s64 suspend_latency_ns;
s64 resume_latency_ns;
s64 effective_constraint_ns;
bool constraint_changed;
bool cached_suspend_ok;
};
struct pm_domain_data {
struct list_head list_node;
struct device *dev;
};
struct generic_pm_domain_data {
struct pm_domain_data base;
struct gpd_timing_data td;
struct notifier_block nb;
PM / Domains: Add support to select performance-state of domains Some platforms have the capability to configure the performance state of PM domains. This patch enhances the genpd core to support such platforms. The performance levels (within the genpd core) are identified by positive integer values, a lower value represents lower performance state. This patch adds a new genpd API, which is called by user drivers (like OPP framework): - int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state); This updates the performance state constraint of the device on its PM domain. On success, the genpd will have its performance state set to a value which is >= "state" passed to this routine. The genpd core calls the genpd->set_performance_state() callback, if implemented, else -ENODEV is returned to the caller. The PM domain drivers need to implement the following callback if they want to support performance states. - int (*set_performance_state)(struct generic_pm_domain *genpd, unsigned int state); This is called internally by the genpd core on several occasions. The genpd core passes the genpd pointer and the aggregate of the performance states of the devices supported by that genpd to this callback. This callback must update the performance state of the genpd (in a platform dependent way). The power domains can avoid supplying above callback, if they don't support setting performance-states. Currently we aren't propagating performance state changes of a subdomain to its masters as we don't have hardware that needs it right now. Over that, the performance states of subdomain and its masters may not have one-to-one mapping and would require additional information. We can get back to this once we have hardware that needs it. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 16:37:23 +07:00
unsigned int performance_state;
void *data;
};
#ifdef CONFIG_PM_GENERIC_DOMAINS
static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd)
{
return container_of(pdd, struct generic_pm_domain_data, base);
}
static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
{
return to_gpd_data(dev->power.subsys_data->domain_data);
}
int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev);
int pm_genpd_remove_device(struct device *dev);
int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_subdomain);
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *target);
int pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off);
int pm_genpd_remove(struct generic_pm_domain *genpd);
int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state);
extern struct dev_power_governor simple_qos_governor;
extern struct dev_power_governor pm_domain_always_on_gov;
#else
static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
{
return ERR_PTR(-ENOSYS);
}
static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
struct device *dev)
{
return -ENOSYS;
}
static inline int pm_genpd_remove_device(struct device *dev)
{
return -ENOSYS;
}
static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_sd)
{
return -ENOSYS;
}
static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *target)
{
return -ENOSYS;
}
static inline int pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off)
{
return -ENOSYS;
}
static inline int pm_genpd_remove(struct generic_pm_domain *genpd)
{
return -ENOTSUPP;
}
PM / Domains: Add support to select performance-state of domains Some platforms have the capability to configure the performance state of PM domains. This patch enhances the genpd core to support such platforms. The performance levels (within the genpd core) are identified by positive integer values, a lower value represents lower performance state. This patch adds a new genpd API, which is called by user drivers (like OPP framework): - int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state); This updates the performance state constraint of the device on its PM domain. On success, the genpd will have its performance state set to a value which is >= "state" passed to this routine. The genpd core calls the genpd->set_performance_state() callback, if implemented, else -ENODEV is returned to the caller. The PM domain drivers need to implement the following callback if they want to support performance states. - int (*set_performance_state)(struct generic_pm_domain *genpd, unsigned int state); This is called internally by the genpd core on several occasions. The genpd core passes the genpd pointer and the aggregate of the performance states of the devices supported by that genpd to this callback. This callback must update the performance state of the genpd (in a platform dependent way). The power domains can avoid supplying above callback, if they don't support setting performance-states. Currently we aren't propagating performance state changes of a subdomain to its masters as we don't have hardware that needs it right now. Over that, the performance states of subdomain and its masters may not have one-to-one mapping and would require additional information. We can get back to this once we have hardware that needs it. Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-12 16:37:23 +07:00
static inline int dev_pm_genpd_set_performance_state(struct device *dev,
unsigned int state)
{
return -ENOTSUPP;
}
#define simple_qos_governor (*(struct dev_power_governor *)(NULL))
#define pm_domain_always_on_gov (*(struct dev_power_governor *)(NULL))
#endif
#ifdef CONFIG_PM_GENERIC_DOMAINS_SLEEP
void pm_genpd_syscore_poweroff(struct device *dev);
void pm_genpd_syscore_poweron(struct device *dev);
#else
static inline void pm_genpd_syscore_poweroff(struct device *dev) {}
static inline void pm_genpd_syscore_poweron(struct device *dev) {}
#endif
/* OF PM domain providers */
struct of_device_id;
typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args,
void *data);
struct genpd_onecell_data {
struct generic_pm_domain **domains;
unsigned int num_domains;
genpd_xlate_t xlate;
};
#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
int of_genpd_add_provider_simple(struct device_node *np,
struct generic_pm_domain *genpd);
int of_genpd_add_provider_onecell(struct device_node *np,
struct genpd_onecell_data *data);
void of_genpd_del_provider(struct device_node *np);
int of_genpd_add_device(struct of_phandle_args *args, struct device *dev);
int of_genpd_add_subdomain(struct of_phandle_args *parent,
struct of_phandle_args *new_subdomain);
struct generic_pm_domain *of_genpd_remove_last(struct device_node *np);
int of_genpd_parse_idle_states(struct device_node *dn,
struct genpd_power_state **states, int *n);
unsigned int of_genpd_opp_to_performance_state(struct device *dev,
struct device_node *opp_node);
int genpd_dev_pm_attach(struct device *dev);
PM / Domains: Add support for multi PM domains per device to genpd To support devices being partitioned across multiple PM domains, let's begin with extending genpd to cope with these kind of configurations. Therefore, add a new exported function genpd_dev_pm_attach_by_id(), which is similar to the existing genpd_dev_pm_attach(), but with the difference that it allows its callers to provide an index to the PM domain that it wants to attach. Note that, genpd_dev_pm_attach_by_id() shall only be called by the driver core / PM core, similar to how the existing dev_pm_domain_attach() makes use of genpd_dev_pm_attach(). However, this is implemented by following changes on top. Because, only one PM domain can be attached per device, genpd needs to create a virtual device that it can attach/detach instead. More precisely, let the new function genpd_dev_pm_attach_by_id() register a virtual struct device via calling device_register(). Then let it attach this device to the corresponding PM domain, rather than the one that is provided by the caller. The actual attaching is done via re-using the existing genpd OF functions. At successful attachment, genpd_dev_pm_attach_by_id() returns the created virtual device, which allows the caller to operate on it to deal with power management. Following changes on top, provides more details in this regards. To deal with detaching of a PM domain for the multiple PM domains case, let's also extend the existing genpd_dev_pm_detach() function, to cover the cleanup of the created virtual device, via make it call device_unregister() on it. In this way, there is no need to introduce a new function to deal with detach for the multiple PM domain case, but instead the existing one is re-used. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-31 17:59:58 +07:00
struct device *genpd_dev_pm_attach_by_id(struct device *dev,
unsigned int index);
#else /* !CONFIG_PM_GENERIC_DOMAINS_OF */
static inline int of_genpd_add_provider_simple(struct device_node *np,
struct generic_pm_domain *genpd)
{
return -ENOTSUPP;
}
static inline int of_genpd_add_provider_onecell(struct device_node *np,
struct genpd_onecell_data *data)
{
return -ENOTSUPP;
}
static inline void of_genpd_del_provider(struct device_node *np) {}
static inline int of_genpd_add_device(struct of_phandle_args *args,
struct device *dev)
{
return -ENODEV;
}
static inline int of_genpd_add_subdomain(struct of_phandle_args *parent,
struct of_phandle_args *new_subdomain)
{
return -ENODEV;
}
static inline int of_genpd_parse_idle_states(struct device_node *dn,
struct genpd_power_state **states, int *n)
{
return -ENODEV;
}
static inline unsigned int
of_genpd_opp_to_performance_state(struct device *dev,
struct device_node *opp_node)
{
return -ENODEV;
}
static inline int genpd_dev_pm_attach(struct device *dev)
{
return 0;
}
PM / Domains: Add support for multi PM domains per device to genpd To support devices being partitioned across multiple PM domains, let's begin with extending genpd to cope with these kind of configurations. Therefore, add a new exported function genpd_dev_pm_attach_by_id(), which is similar to the existing genpd_dev_pm_attach(), but with the difference that it allows its callers to provide an index to the PM domain that it wants to attach. Note that, genpd_dev_pm_attach_by_id() shall only be called by the driver core / PM core, similar to how the existing dev_pm_domain_attach() makes use of genpd_dev_pm_attach(). However, this is implemented by following changes on top. Because, only one PM domain can be attached per device, genpd needs to create a virtual device that it can attach/detach instead. More precisely, let the new function genpd_dev_pm_attach_by_id() register a virtual struct device via calling device_register(). Then let it attach this device to the corresponding PM domain, rather than the one that is provided by the caller. The actual attaching is done via re-using the existing genpd OF functions. At successful attachment, genpd_dev_pm_attach_by_id() returns the created virtual device, which allows the caller to operate on it to deal with power management. Following changes on top, provides more details in this regards. To deal with detaching of a PM domain for the multiple PM domains case, let's also extend the existing genpd_dev_pm_detach() function, to cover the cleanup of the created virtual device, via make it call device_unregister() on it. In this way, there is no need to introduce a new function to deal with detach for the multiple PM domain case, but instead the existing one is re-used. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-31 17:59:58 +07:00
static inline struct device *genpd_dev_pm_attach_by_id(struct device *dev,
unsigned int index)
{
return NULL;
}
static inline
struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
{
return ERR_PTR(-ENOTSUPP);
}
#endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
#ifdef CONFIG_PM
int dev_pm_domain_attach(struct device *dev, bool power_on);
PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains The existing dev_pm_domain_attach() function, allows a single PM domain to be attached per device. To be able to support devices that are partitioned across multiple PM domains, let's introduce a new interface, dev_pm_domain_attach_by_id(). The dev_pm_domain_attach_by_id() returns a new allocated struct device with the corresponding attached PM domain. This enables for example a driver to operate on the new device from a power management point of view. The driver may then also benefit from using the received device, to set up so called device-links towards its original device. Depending on the situation, these links may then be dynamically changed. The new interface is typically called by drivers during their probe phase, in case they manages devices which uses multiple PM domains. If that is the case, the driver also becomes responsible of managing the detaching of the PM domains, which typically should be done at the remove phase. Detaching is done by calling the existing dev_pm_domain_detach() function and for each of the received devices from dev_pm_domain_attach_by_id(). Note, currently its only genpd that supports multiple PM domains per device, but dev_pm_domain_attach_by_id() can easily by extended to cover other PM domain types, if/when needed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-31 17:59:59 +07:00
struct device *dev_pm_domain_attach_by_id(struct device *dev,
unsigned int index);
void dev_pm_domain_detach(struct device *dev, bool power_off);
void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd);
#else
static inline int dev_pm_domain_attach(struct device *dev, bool power_on)
{
return 0;
}
PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains The existing dev_pm_domain_attach() function, allows a single PM domain to be attached per device. To be able to support devices that are partitioned across multiple PM domains, let's introduce a new interface, dev_pm_domain_attach_by_id(). The dev_pm_domain_attach_by_id() returns a new allocated struct device with the corresponding attached PM domain. This enables for example a driver to operate on the new device from a power management point of view. The driver may then also benefit from using the received device, to set up so called device-links towards its original device. Depending on the situation, these links may then be dynamically changed. The new interface is typically called by drivers during their probe phase, in case they manages devices which uses multiple PM domains. If that is the case, the driver also becomes responsible of managing the detaching of the PM domains, which typically should be done at the remove phase. Detaching is done by calling the existing dev_pm_domain_detach() function and for each of the received devices from dev_pm_domain_attach_by_id(). Note, currently its only genpd that supports multiple PM domains per device, but dev_pm_domain_attach_by_id() can easily by extended to cover other PM domain types, if/when needed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-31 17:59:59 +07:00
static inline struct device *dev_pm_domain_attach_by_id(struct device *dev,
unsigned int index)
{
return NULL;
}
static inline void dev_pm_domain_detach(struct device *dev, bool power_off) {}
static inline void dev_pm_domain_set(struct device *dev,
struct dev_pm_domain *pd) {}
#endif
#endif /* _LINUX_PM_DOMAIN_H */