2019-06-04 15:11:33 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2006-11-15 01:43:21 +07:00
|
|
|
/*
|
|
|
|
* ixp4xx PATA/Compact Flash driver
|
2007-05-27 06:26:55 +07:00
|
|
|
* Copyright (C) 2006-07 Tower Technologies
|
2006-11-15 01:43:21 +07:00
|
|
|
* Author: Alessandro Zummo <a.zummo@towertech.it>
|
|
|
|
*
|
|
|
|
* An ATA driver to handle a Compact Flash connected
|
|
|
|
* to the ixp4xx expansion bus in TrueIDE mode. The CF
|
|
|
|
* must have it chip selects connected to two CS lines
|
2007-05-27 06:26:55 +07:00
|
|
|
* on the ixp4xx. In the irq is not available, you might
|
|
|
|
* want to modify both this driver and libata to run in
|
|
|
|
* polling mode.
|
2006-11-15 01:43:21 +07:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "pata_ixp4xx_cf"
|
2007-05-27 06:26:55 +07:00
|
|
|
#define DRV_VERSION "0.2"
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2007-08-06 16:36:23 +07:00
|
|
|
static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
|
2006-11-15 01:43:21 +07:00
|
|
|
{
|
2007-08-06 16:36:23 +07:00
|
|
|
struct ata_device *dev;
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2008-11-03 18:03:17 +07:00
|
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
Saves text by removing nearly duplicated text format strings by
creating ata_<foo>_printk functions and printf extension %pV.
ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
Format string duplication comes from:
#define ata_link_printk(link, lv, fmt, args...) do { \
if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)
Coalesce long formats.
$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-16 05:51:59 +07:00
|
|
|
ata_dev_info(dev, "configured for PIO0\n");
|
2008-11-03 18:03:17 +07:00
|
|
|
dev->pio_mode = XFER_PIO_0;
|
|
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
|
|
dev->flags |= ATA_DFLAG_PIO;
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
2007-01-24 18:47:07 +07:00
|
|
|
return 0;
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
|
|
|
|
2016-12-30 21:01:17 +07:00
|
|
|
static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
|
2007-12-05 14:43:07 +07:00
|
|
|
unsigned char *buf, unsigned int buflen, int rw)
|
2006-11-15 01:43:21 +07:00
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned int words = buflen >> 1;
|
|
|
|
u16 *buf16 = (u16 *) buf;
|
2016-12-30 21:01:17 +07:00
|
|
|
struct ata_port *ap = qc->dev->link->ap;
|
2007-05-28 18:07:20 +07:00
|
|
|
void __iomem *mmio = ap->ioaddr.data_addr;
|
2013-07-30 15:16:05 +07:00
|
|
|
struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
/* set the expansion bus in 16bit mode and restore
|
|
|
|
* 8 bit mode after the transaction.
|
|
|
|
*/
|
|
|
|
*data->cs0_cfg &= ~(0x01);
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
/* Transfer multiple of 2 bytes */
|
2007-12-05 14:43:07 +07:00
|
|
|
if (rw == READ)
|
2006-11-15 01:43:21 +07:00
|
|
|
for (i = 0; i < words; i++)
|
|
|
|
buf16[i] = readw(mmio);
|
2007-12-05 14:43:07 +07:00
|
|
|
else
|
|
|
|
for (i = 0; i < words; i++)
|
|
|
|
writew(buf16[i], mmio);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
/* Transfer trailing 1 byte, if any. */
|
|
|
|
if (unlikely(buflen & 0x01)) {
|
|
|
|
u16 align_buf[1] = { 0 };
|
|
|
|
unsigned char *trailing_buf = buf + buflen - 1;
|
|
|
|
|
2007-12-05 14:43:07 +07:00
|
|
|
if (rw == READ) {
|
2006-11-15 01:43:21 +07:00
|
|
|
align_buf[0] = readw(mmio);
|
|
|
|
memcpy(trailing_buf, align_buf, 1);
|
2007-12-05 14:43:07 +07:00
|
|
|
} else {
|
|
|
|
memcpy(align_buf, trailing_buf, 1);
|
|
|
|
writew(align_buf[0], mmio);
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
2007-12-05 14:43:07 +07:00
|
|
|
words++;
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
udelay(100);
|
|
|
|
*data->cs0_cfg |= 0x01;
|
2007-12-05 14:43:07 +07:00
|
|
|
|
|
|
|
return words << 1;
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct scsi_host_template ixp4xx_sht = {
|
2008-03-25 10:22:49 +07:00
|
|
|
ATA_PIO_SHT(DRV_NAME),
|
2006-11-15 01:43:21 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_operations ixp4xx_port_ops = {
|
libata: implement and use ops inheritance
libata lets low level drivers build ata_port_operations table and
register it with libata core layer. This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.
This becomes worse for drivers which support related similar
controllers which differ slightly. They share most of the operations
except for a few. However, the driver still needs to list all
operations for each variant. This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.
This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone. When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time. Some of those inconsistencies
cause immediate problems and fixed. Others just remain there dormant
making maintenance increasingly difficult.
To rectify the problem, this patch implements ata_port_operations
inheritance. To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance. An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop. When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified. This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.
libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma. To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.
After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to. The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.
* sata_sx4 is still using old style EH and currently doesn't take
advantage of ops inheritance.
Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 10:22:49 +07:00
|
|
|
.inherits = &ata_sff_port_ops,
|
2008-04-07 20:47:16 +07:00
|
|
|
.sff_data_xfer = ixp4xx_mmio_data_xfer,
|
2007-05-27 06:26:55 +07:00
|
|
|
.cable_detect = ata_cable_40wire,
|
libata: implement and use ops inheritance
libata lets low level drivers build ata_port_operations table and
register it with libata core layer. This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.
This becomes worse for drivers which support related similar
controllers which differ slightly. They share most of the operations
except for a few. However, the driver still needs to list all
operations for each variant. This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.
This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone. When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time. Some of those inconsistencies
cause immediate problems and fixed. Others just remain there dormant
making maintenance increasingly difficult.
To rectify the problem, this patch implements ata_port_operations
inheritance. To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance. An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop. When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified. This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.
libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma. To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.
After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to. The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.
* sata_sx4 is still using old style EH and currently doesn't take
advantage of ops inheritance.
Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 10:22:49 +07:00
|
|
|
.set_mode = ixp4xx_set_mode,
|
2006-11-15 01:43:21 +07:00
|
|
|
};
|
|
|
|
|
2008-01-06 08:05:28 +07:00
|
|
|
static void ixp4xx_setup_port(struct ata_port *ap,
|
2007-08-18 11:14:55 +07:00
|
|
|
struct ixp4xx_pata_data *data,
|
|
|
|
unsigned long raw_cs0, unsigned long raw_cs1)
|
2006-11-15 01:43:21 +07:00
|
|
|
{
|
2008-01-06 08:05:28 +07:00
|
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
2007-08-18 11:14:55 +07:00
|
|
|
unsigned long raw_cmd = raw_cs0;
|
|
|
|
unsigned long raw_ctl = raw_cs1 + 0x06;
|
|
|
|
|
2007-02-01 13:06:36 +07:00
|
|
|
ioaddr->cmd_addr = data->cs0;
|
|
|
|
ioaddr->altstatus_addr = data->cs1 + 0x06;
|
|
|
|
ioaddr->ctl_addr = data->cs1 + 0x06;
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2008-04-07 20:47:16 +07:00
|
|
|
ata_sff_std_ports(ioaddr);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
#ifndef __ARMEB__
|
|
|
|
|
|
|
|
/* adjust the addresses to handle the address swizzling of the
|
|
|
|
* ixp4xx in little endian mode.
|
|
|
|
*/
|
|
|
|
|
2007-02-01 13:06:36 +07:00
|
|
|
*(unsigned long *)&ioaddr->data_addr ^= 0x02;
|
|
|
|
*(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->error_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->feature_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->device_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->status_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->command_addr ^= 0x03;
|
2007-08-18 11:14:55 +07:00
|
|
|
|
|
|
|
raw_cmd ^= 0x03;
|
|
|
|
raw_ctl ^= 0x03;
|
2006-11-15 01:43:21 +07:00
|
|
|
#endif
|
2007-08-18 11:14:55 +07:00
|
|
|
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
|
|
|
|
2012-12-22 04:19:58 +07:00
|
|
|
static int ixp4xx_pata_probe(struct platform_device *pdev)
|
2006-11-15 01:43:21 +07:00
|
|
|
{
|
|
|
|
unsigned int irq;
|
|
|
|
struct resource *cs0, *cs1;
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 21:44:08 +07:00
|
|
|
struct ata_host *host;
|
|
|
|
struct ata_port *ap;
|
2013-07-30 15:16:05 +07:00
|
|
|
struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
|
2013-06-11 00:41:59 +07:00
|
|
|
int ret;
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
|
|
|
|
if (!cs0 || !cs1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 21:44:08 +07:00
|
|
|
/* allocate host */
|
|
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
|
|
if (!host)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
/* acquire resources and fill host */
|
2013-06-11 00:41:59 +07:00
|
|
|
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2007-01-20 14:00:28 +07:00
|
|
|
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
|
|
|
|
data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2007-10-03 03:53:01 +07:00
|
|
|
if (!data->cs0 || !data->cs1)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2006-11-15 01:43:21 +07:00
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq)
|
2011-03-28 22:49:12 +07:00
|
|
|
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
/* Setup expansion bus chip selects */
|
|
|
|
*data->cs0_cfg = data->cs0_bits;
|
|
|
|
*data->cs1_cfg = data->cs1_bits;
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 21:44:08 +07:00
|
|
|
ap = host->ports[0];
|
2006-11-15 01:43:21 +07:00
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 21:44:08 +07:00
|
|
|
ap->ops = &ixp4xx_port_ops;
|
2009-03-15 03:38:24 +07:00
|
|
|
ap->pio_mask = ATA_PIO4;
|
2011-02-05 02:05:48 +07:00
|
|
|
ap->flags |= ATA_FLAG_NO_ATAPI;
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2007-08-18 11:14:55 +07:00
|
|
|
ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
2011-04-16 05:52:00 +07:00
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 21:44:08 +07:00
|
|
|
/* activate host */
|
2008-04-07 20:47:16 +07:00
|
|
|
return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
|
2006-11-15 01:43:21 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver ixp4xx_pata_platform_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
},
|
|
|
|
.probe = ixp4xx_pata_probe,
|
2012-11-02 14:46:20 +07:00
|
|
|
.remove = ata_platform_remove_one,
|
2006-11-15 01:43:21 +07:00
|
|
|
};
|
|
|
|
|
2011-11-27 13:44:26 +07:00
|
|
|
module_platform_driver(ixp4xx_pata_platform_driver);
|
2006-11-15 01:43:21 +07:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
|
|
|
|
MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
2008-04-19 03:41:57 +07:00
|
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|