drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
/*
|
|
|
|
* Copyright 2012 Red Hat Inc.
|
|
|
|
* Parts based on xf86-video-ast
|
|
|
|
* Copyright (c) 2005 ASPEED Technology Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the
|
|
|
|
* "Software"), to deal in the Software without restriction, including
|
|
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
* the following conditions:
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
|
|
|
|
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
|
|
|
|
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
|
|
|
|
* USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the
|
|
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
|
|
* of the Software.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Authors: Dave Airlie <airlied@redhat.com>
|
|
|
|
*/
|
|
|
|
#include <linux/export.h>
|
2012-10-03 00:01:07 +07:00
|
|
|
#include <drm/drmP.h>
|
|
|
|
#include <drm/drm_crtc.h>
|
|
|
|
#include <drm/drm_crtc_helper.h>
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
#include "ast_drv.h"
|
|
|
|
|
|
|
|
#include "ast_tables.h"
|
|
|
|
|
|
|
|
static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev);
|
|
|
|
static void ast_i2c_destroy(struct ast_i2c_chan *i2c);
|
|
|
|
static int ast_cursor_set(struct drm_crtc *crtc,
|
|
|
|
struct drm_file *file_priv,
|
|
|
|
uint32_t handle,
|
|
|
|
uint32_t width,
|
|
|
|
uint32_t height);
|
|
|
|
static int ast_cursor_move(struct drm_crtc *crtc,
|
|
|
|
int x, int y);
|
|
|
|
|
|
|
|
static inline void ast_load_palette_index(struct ast_private *ast,
|
|
|
|
u8 index, u8 red, u8 green,
|
|
|
|
u8 blue)
|
|
|
|
{
|
|
|
|
ast_io_write8(ast, AST_IO_DAC_INDEX_WRITE, index);
|
|
|
|
ast_io_read8(ast, AST_IO_SEQ_PORT);
|
|
|
|
ast_io_write8(ast, AST_IO_DAC_DATA, red);
|
|
|
|
ast_io_read8(ast, AST_IO_SEQ_PORT);
|
|
|
|
ast_io_write8(ast, AST_IO_DAC_DATA, green);
|
|
|
|
ast_io_read8(ast, AST_IO_SEQ_PORT);
|
|
|
|
ast_io_write8(ast, AST_IO_DAC_DATA, blue);
|
|
|
|
ast_io_read8(ast, AST_IO_SEQ_PORT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_load_lut(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!crtc->enabled)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < 256; i++)
|
|
|
|
ast_load_palette_index(ast, i, ast_crtc->lut_r[i],
|
|
|
|
ast_crtc->lut_g[i], ast_crtc->lut_b[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool ast_get_vbios_mode_info(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode,
|
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
u32 refresh_rate_index = 0, mode_id, color_index, refresh_rate;
|
|
|
|
u32 hborder, vborder;
|
|
|
|
|
2014-04-02 05:22:40 +07:00
|
|
|
switch (crtc->primary->fb->bits_per_pixel) {
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
case 8:
|
|
|
|
vbios_mode->std_table = &vbios_stdtable[VGAModeIndex];
|
|
|
|
color_index = VGAModeIndex - 1;
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
vbios_mode->std_table = &vbios_stdtable[HiCModeIndex];
|
|
|
|
color_index = HiCModeIndex;
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
case 32:
|
|
|
|
vbios_mode->std_table = &vbios_stdtable[TrueCModeIndex];
|
|
|
|
color_index = TrueCModeIndex;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (crtc->mode.crtc_hdisplay) {
|
|
|
|
case 640:
|
|
|
|
vbios_mode->enh_table = &res_640x480[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 800:
|
|
|
|
vbios_mode->enh_table = &res_800x600[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1024:
|
|
|
|
vbios_mode->enh_table = &res_1024x768[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1280:
|
|
|
|
if (crtc->mode.crtc_vdisplay == 800)
|
|
|
|
vbios_mode->enh_table = &res_1280x800[refresh_rate_index];
|
|
|
|
else
|
|
|
|
vbios_mode->enh_table = &res_1280x1024[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1440:
|
|
|
|
vbios_mode->enh_table = &res_1440x900[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1600:
|
|
|
|
vbios_mode->enh_table = &res_1600x1200[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1680:
|
|
|
|
vbios_mode->enh_table = &res_1680x1050[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
case 1920:
|
|
|
|
if (crtc->mode.crtc_vdisplay == 1080)
|
|
|
|
vbios_mode->enh_table = &res_1920x1080[refresh_rate_index];
|
|
|
|
else
|
|
|
|
vbios_mode->enh_table = &res_1920x1200[refresh_rate_index];
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
refresh_rate = drm_mode_vrefresh(mode);
|
|
|
|
while (vbios_mode->enh_table->refresh_rate < refresh_rate) {
|
|
|
|
vbios_mode->enh_table++;
|
|
|
|
if ((vbios_mode->enh_table->refresh_rate > refresh_rate) ||
|
|
|
|
(vbios_mode->enh_table->refresh_rate == 0xff)) {
|
|
|
|
vbios_mode->enh_table--;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
hborder = (vbios_mode->enh_table->flags & HBorder) ? 8 : 0;
|
|
|
|
vborder = (vbios_mode->enh_table->flags & VBorder) ? 8 : 0;
|
|
|
|
|
|
|
|
adjusted_mode->crtc_htotal = vbios_mode->enh_table->ht;
|
|
|
|
adjusted_mode->crtc_hblank_start = vbios_mode->enh_table->hde + hborder;
|
|
|
|
adjusted_mode->crtc_hblank_end = vbios_mode->enh_table->ht - hborder;
|
|
|
|
adjusted_mode->crtc_hsync_start = vbios_mode->enh_table->hde + hborder +
|
|
|
|
vbios_mode->enh_table->hfp;
|
|
|
|
adjusted_mode->crtc_hsync_end = (vbios_mode->enh_table->hde + hborder +
|
|
|
|
vbios_mode->enh_table->hfp +
|
|
|
|
vbios_mode->enh_table->hsync);
|
|
|
|
|
|
|
|
adjusted_mode->crtc_vtotal = vbios_mode->enh_table->vt;
|
|
|
|
adjusted_mode->crtc_vblank_start = vbios_mode->enh_table->vde + vborder;
|
|
|
|
adjusted_mode->crtc_vblank_end = vbios_mode->enh_table->vt - vborder;
|
|
|
|
adjusted_mode->crtc_vsync_start = vbios_mode->enh_table->vde + vborder +
|
|
|
|
vbios_mode->enh_table->vfp;
|
|
|
|
adjusted_mode->crtc_vsync_end = (vbios_mode->enh_table->vde + vborder +
|
|
|
|
vbios_mode->enh_table->vfp +
|
|
|
|
vbios_mode->enh_table->vsync);
|
|
|
|
|
|
|
|
refresh_rate_index = vbios_mode->enh_table->refresh_rate_index;
|
|
|
|
mode_id = vbios_mode->enh_table->mode_id;
|
|
|
|
|
|
|
|
if (ast->chip == AST1180) {
|
|
|
|
/* TODO 1180 */
|
|
|
|
} else {
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8c, (u8)((color_index & 0xf) << 4));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8d, refresh_rate_index & 0xff);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8e, mode_id & 0xff);
|
|
|
|
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8);
|
2014-04-02 05:22:40 +07:00
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, crtc->primary->fb->bits_per_pixel);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, adjusted_mode->clock / 1000);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, adjusted_mode->crtc_hdisplay);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, adjusted_mode->crtc_hdisplay >> 8);
|
|
|
|
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, adjusted_mode->crtc_vdisplay);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, adjusted_mode->crtc_vdisplay >> 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
static void ast_set_std_reg(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
struct ast_vbios_stdtable *stdtable;
|
|
|
|
u32 i;
|
|
|
|
u8 jreg;
|
|
|
|
|
|
|
|
stdtable = vbios_mode->std_table;
|
|
|
|
|
|
|
|
jreg = stdtable->misc;
|
|
|
|
ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, jreg);
|
|
|
|
|
|
|
|
/* Set SEQ */
|
|
|
|
ast_set_index_reg(ast, AST_IO_SEQ_PORT, 0x00, 0x03);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
jreg = stdtable->seq[i];
|
|
|
|
if (!i)
|
|
|
|
jreg |= 0x20;
|
|
|
|
ast_set_index_reg(ast, AST_IO_SEQ_PORT, (i + 1) , jreg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set CRTC */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x00);
|
|
|
|
for (i = 0; i < 25; i++)
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, stdtable->crtc[i]);
|
|
|
|
|
|
|
|
/* set AR */
|
|
|
|
jreg = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ);
|
|
|
|
for (i = 0; i < 20; i++) {
|
|
|
|
jreg = stdtable->ar[i];
|
|
|
|
ast_io_write8(ast, AST_IO_AR_PORT_WRITE, (u8)i);
|
|
|
|
ast_io_write8(ast, AST_IO_AR_PORT_WRITE, jreg);
|
|
|
|
}
|
|
|
|
ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x14);
|
|
|
|
ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x00);
|
|
|
|
|
|
|
|
jreg = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ);
|
|
|
|
ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x20);
|
|
|
|
|
|
|
|
/* Set GR */
|
|
|
|
for (i = 0; i < 9; i++)
|
|
|
|
ast_set_index_reg(ast, AST_IO_GR_PORT, i, stdtable->gr[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_set_crtc_reg(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
u8 jreg05 = 0, jreg07 = 0, jreg09 = 0, jregAC = 0, jregAD = 0, jregAE = 0;
|
|
|
|
u16 temp;
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x00);
|
|
|
|
|
|
|
|
temp = (mode->crtc_htotal >> 3) - 5;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jregAC |= 0x01; /* HT D[8] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x00, 0x00, temp);
|
|
|
|
|
|
|
|
temp = (mode->crtc_hdisplay >> 3) - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jregAC |= 0x04; /* HDE D[8] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x01, 0x00, temp);
|
|
|
|
|
|
|
|
temp = (mode->crtc_hblank_start >> 3) - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jregAC |= 0x10; /* HBS D[8] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x02, 0x00, temp);
|
|
|
|
|
|
|
|
temp = ((mode->crtc_hblank_end >> 3) - 1) & 0x7f;
|
|
|
|
if (temp & 0x20)
|
|
|
|
jreg05 |= 0x80; /* HBE D[5] */
|
|
|
|
if (temp & 0x40)
|
|
|
|
jregAD |= 0x01; /* HBE D[5] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x03, 0xE0, (temp & 0x1f));
|
|
|
|
|
|
|
|
temp = (mode->crtc_hsync_start >> 3) - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jregAC |= 0x40; /* HRS D[5] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x04, 0x00, temp);
|
|
|
|
|
|
|
|
temp = ((mode->crtc_hsync_end >> 3) - 1) & 0x3f;
|
|
|
|
if (temp & 0x20)
|
|
|
|
jregAD |= 0x04; /* HRE D[5] */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x05, 0x60, (u8)((temp & 0x1f) | jreg05));
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAC, 0x00, jregAC);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAD, 0x00, jregAD);
|
|
|
|
|
|
|
|
/* vert timings */
|
|
|
|
temp = (mode->crtc_vtotal) - 2;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jreg07 |= 0x01;
|
|
|
|
if (temp & 0x200)
|
|
|
|
jreg07 |= 0x20;
|
|
|
|
if (temp & 0x400)
|
|
|
|
jregAE |= 0x01;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x06, 0x00, temp);
|
|
|
|
|
|
|
|
temp = (mode->crtc_vsync_start) - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jreg07 |= 0x04;
|
|
|
|
if (temp & 0x200)
|
|
|
|
jreg07 |= 0x80;
|
|
|
|
if (temp & 0x400)
|
|
|
|
jregAE |= 0x08;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x10, 0x00, temp);
|
|
|
|
|
|
|
|
temp = (mode->crtc_vsync_end - 1) & 0x3f;
|
|
|
|
if (temp & 0x10)
|
|
|
|
jregAE |= 0x20;
|
|
|
|
if (temp & 0x20)
|
|
|
|
jregAE |= 0x40;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x70, temp & 0xf);
|
|
|
|
|
|
|
|
temp = mode->crtc_vdisplay - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jreg07 |= 0x02;
|
|
|
|
if (temp & 0x200)
|
|
|
|
jreg07 |= 0x40;
|
|
|
|
if (temp & 0x400)
|
|
|
|
jregAE |= 0x02;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x12, 0x00, temp);
|
|
|
|
|
|
|
|
temp = mode->crtc_vblank_start - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jreg07 |= 0x08;
|
|
|
|
if (temp & 0x200)
|
|
|
|
jreg09 |= 0x20;
|
|
|
|
if (temp & 0x400)
|
|
|
|
jregAE |= 0x04;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x15, 0x00, temp);
|
|
|
|
|
|
|
|
temp = mode->crtc_vblank_end - 1;
|
|
|
|
if (temp & 0x100)
|
|
|
|
jregAE |= 0x10;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x16, 0x00, temp);
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x07, 0x00, jreg07);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x09, 0xdf, jreg09);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAE, 0x00, (jregAE | 0x80));
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x80);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_set_offset_reg(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
|
|
|
|
u16 offset;
|
|
|
|
|
2014-04-02 05:22:40 +07:00
|
|
|
offset = crtc->primary->fb->pitches[0] >> 3;
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x13, (offset & 0xff));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xb0, (offset >> 8) & 0x3f);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_set_dclk_reg(struct drm_device *dev, struct drm_display_mode *mode,
|
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = dev->dev_private;
|
|
|
|
struct ast_vbios_dclk_info *clk_info;
|
|
|
|
|
|
|
|
clk_info = &dclk_table[vbios_mode->enh_table->dclk_index];
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xc0, 0x00, clk_info->param1);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xc1, 0x00, clk_info->param2);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xbb, 0x0f,
|
|
|
|
(clk_info->param3 & 0x80) | ((clk_info->param3 & 0x3) << 4));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_set_ext_reg(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
u8 jregA0 = 0, jregA3 = 0, jregA8 = 0;
|
|
|
|
|
2014-04-02 05:22:40 +07:00
|
|
|
switch (crtc->primary->fb->bits_per_pixel) {
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
case 8:
|
|
|
|
jregA0 = 0x70;
|
|
|
|
jregA3 = 0x01;
|
|
|
|
jregA8 = 0x00;
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
case 16:
|
|
|
|
jregA0 = 0x70;
|
|
|
|
jregA3 = 0x04;
|
|
|
|
jregA8 = 0x02;
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
jregA0 = 0x70;
|
|
|
|
jregA3 = 0x08;
|
|
|
|
jregA8 = 0x02;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa0, 0x8f, jregA0);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xf0, jregA3);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa8, 0xfd, jregA8);
|
|
|
|
|
|
|
|
/* Set Threshold */
|
|
|
|
if (ast->chip == AST2300) {
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x78);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x60);
|
|
|
|
} else if (ast->chip == AST2100 ||
|
|
|
|
ast->chip == AST1100 ||
|
|
|
|
ast->chip == AST2200 ||
|
|
|
|
ast->chip == AST2150) {
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x3f);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x2f);
|
|
|
|
} else {
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x2f);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x1f);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static void ast_set_sync_reg(struct drm_device *dev, struct drm_display_mode *mode,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = dev->dev_private;
|
|
|
|
u8 jreg;
|
|
|
|
|
|
|
|
jreg = ast_io_read8(ast, AST_IO_MISC_PORT_READ);
|
|
|
|
jreg |= (vbios_mode->enh_table->flags & SyncNN);
|
|
|
|
ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, jreg);
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static bool ast_set_dac_reg(struct drm_crtc *crtc, struct drm_display_mode *mode,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
struct ast_vbios_mode_info *vbios_mode)
|
|
|
|
{
|
2014-04-02 05:22:40 +07:00
|
|
|
switch (crtc->primary->fb->bits_per_pixel) {
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
case 8:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static void ast_set_start_address_crt1(struct drm_crtc *crtc, unsigned offset)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
u32 addr;
|
|
|
|
|
|
|
|
addr = offset >> 2;
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x0d, (u8)(addr & 0xff));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x0c, (u8)((addr >> 8) & 0xff));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xaf, (u8)((addr >> 16) & 0xff));
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
|
|
|
|
if (ast->chip == AST1180)
|
|
|
|
return;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case DRM_MODE_DPMS_ON:
|
|
|
|
case DRM_MODE_DPMS_STANDBY:
|
|
|
|
case DRM_MODE_DPMS_SUSPEND:
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
|
|
|
|
ast_crtc_load_lut(crtc);
|
|
|
|
break;
|
|
|
|
case DRM_MODE_DPMS_OFF:
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0x20);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool ast_crtc_mode_fixup(struct drm_crtc *crtc,
|
2012-07-17 22:56:50 +07:00
|
|
|
const struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ast is different - we will force move buffers out of VRAM */
|
|
|
|
static int ast_crtc_do_set_base(struct drm_crtc *crtc,
|
|
|
|
struct drm_framebuffer *fb,
|
|
|
|
int x, int y, int atomic)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
struct ast_framebuffer *ast_fb;
|
|
|
|
struct ast_bo *bo;
|
|
|
|
int ret;
|
|
|
|
u64 gpu_addr;
|
|
|
|
|
|
|
|
/* push the previous fb to system ram */
|
|
|
|
if (!atomic && fb) {
|
|
|
|
ast_fb = to_ast_framebuffer(fb);
|
|
|
|
obj = ast_fb->obj;
|
|
|
|
bo = gem_to_ast_bo(obj);
|
|
|
|
ret = ast_bo_reserve(bo, false);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ast_bo_push_sysram(bo);
|
|
|
|
ast_bo_unreserve(bo);
|
|
|
|
}
|
|
|
|
|
2014-04-02 05:22:40 +07:00
|
|
|
ast_fb = to_ast_framebuffer(crtc->primary->fb);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
obj = ast_fb->obj;
|
|
|
|
bo = gem_to_ast_bo(obj);
|
|
|
|
|
|
|
|
ret = ast_bo_reserve(bo, false);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = ast_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
|
|
|
|
if (ret) {
|
|
|
|
ast_bo_unreserve(bo);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (&ast->fbdev->afb == ast_fb) {
|
|
|
|
/* if pushing console in kmap it */
|
|
|
|
ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
|
|
|
|
if (ret)
|
|
|
|
DRM_ERROR("failed to kmap fbcon\n");
|
|
|
|
}
|
|
|
|
ast_bo_unreserve(bo);
|
|
|
|
|
|
|
|
ast_set_start_address_crt1(crtc, (u32)gpu_addr);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
|
|
|
|
struct drm_framebuffer *old_fb)
|
|
|
|
{
|
|
|
|
return ast_crtc_do_set_base(crtc, old_fb, x, y, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_crtc_mode_set(struct drm_crtc *crtc,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode,
|
|
|
|
int x, int y,
|
|
|
|
struct drm_framebuffer *old_fb)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = crtc->dev;
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
struct ast_vbios_mode_info vbios_mode;
|
|
|
|
bool ret;
|
|
|
|
if (ast->chip == AST1180) {
|
|
|
|
DRM_ERROR("AST 1180 modesetting not supported\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = ast_get_vbios_mode_info(crtc, mode, adjusted_mode, &vbios_mode);
|
|
|
|
if (ret == false)
|
|
|
|
return -EINVAL;
|
|
|
|
ast_open_key(ast);
|
|
|
|
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04);
|
|
|
|
|
|
|
|
ast_set_std_reg(crtc, adjusted_mode, &vbios_mode);
|
|
|
|
ast_set_crtc_reg(crtc, adjusted_mode, &vbios_mode);
|
|
|
|
ast_set_offset_reg(crtc);
|
|
|
|
ast_set_dclk_reg(dev, adjusted_mode, &vbios_mode);
|
|
|
|
ast_set_ext_reg(crtc, adjusted_mode, &vbios_mode);
|
|
|
|
ast_set_sync_reg(dev, adjusted_mode, &vbios_mode);
|
|
|
|
ast_set_dac_reg(crtc, adjusted_mode, &vbios_mode);
|
|
|
|
|
|
|
|
ast_crtc_mode_set_base(crtc, x, y, old_fb);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_disable(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_prepare(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_commit(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
|
|
|
|
.dpms = ast_crtc_dpms,
|
|
|
|
.mode_fixup = ast_crtc_mode_fixup,
|
|
|
|
.mode_set = ast_crtc_mode_set,
|
|
|
|
.mode_set_base = ast_crtc_mode_set_base,
|
|
|
|
.disable = ast_crtc_disable,
|
|
|
|
.load_lut = ast_crtc_load_lut,
|
|
|
|
.prepare = ast_crtc_prepare,
|
|
|
|
.commit = ast_crtc_commit,
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
static void ast_crtc_reset(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
|
|
|
|
u16 *blue, uint32_t start, uint32_t size)
|
|
|
|
{
|
|
|
|
struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
|
|
|
|
int end = (start + size > 256) ? 256 : start + size, i;
|
|
|
|
|
|
|
|
/* userspace palettes are always correct as is */
|
|
|
|
for (i = start; i < end; i++) {
|
|
|
|
ast_crtc->lut_r[i] = red[i] >> 8;
|
|
|
|
ast_crtc->lut_g[i] = green[i] >> 8;
|
|
|
|
ast_crtc->lut_b[i] = blue[i] >> 8;
|
|
|
|
}
|
|
|
|
ast_crtc_load_lut(crtc);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void ast_crtc_destroy(struct drm_crtc *crtc)
|
|
|
|
{
|
|
|
|
drm_crtc_cleanup(crtc);
|
|
|
|
kfree(crtc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_crtc_funcs ast_crtc_funcs = {
|
|
|
|
.cursor_set = ast_cursor_set,
|
|
|
|
.cursor_move = ast_cursor_move,
|
|
|
|
.reset = ast_crtc_reset,
|
|
|
|
.set_config = drm_crtc_helper_set_config,
|
|
|
|
.gamma_set = ast_crtc_gamma_set,
|
|
|
|
.destroy = ast_crtc_destroy,
|
|
|
|
};
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static int ast_crtc_init(struct drm_device *dev)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_crtc *crtc;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
crtc = kzalloc(sizeof(struct ast_crtc), GFP_KERNEL);
|
|
|
|
if (!crtc)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
drm_crtc_init(dev, &crtc->base, &ast_crtc_funcs);
|
|
|
|
drm_mode_crtc_set_gamma_size(&crtc->base, 256);
|
|
|
|
drm_crtc_helper_add(&crtc->base, &ast_crtc_helper_funcs);
|
|
|
|
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
|
|
crtc->lut_r[i] = i;
|
|
|
|
crtc->lut_g[i] = i;
|
|
|
|
crtc->lut_b[i] = i;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_encoder_destroy(struct drm_encoder *encoder)
|
|
|
|
{
|
|
|
|
drm_encoder_cleanup(encoder);
|
|
|
|
kfree(encoder);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct drm_encoder *ast_best_single_encoder(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
int enc_id = connector->encoder_ids[0];
|
|
|
|
struct drm_mode_object *obj;
|
|
|
|
struct drm_encoder *encoder;
|
|
|
|
|
|
|
|
/* pick the encoder ids */
|
|
|
|
if (enc_id) {
|
|
|
|
obj = drm_mode_object_find(connector->dev, enc_id, DRM_MODE_OBJECT_ENCODER);
|
|
|
|
if (!obj)
|
|
|
|
return NULL;
|
|
|
|
encoder = obj_to_encoder(obj);
|
|
|
|
return encoder;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static const struct drm_encoder_funcs ast_enc_funcs = {
|
|
|
|
.destroy = ast_encoder_destroy,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void ast_encoder_dpms(struct drm_encoder *encoder, int mode)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool ast_mode_fixup(struct drm_encoder *encoder,
|
2012-07-17 22:56:50 +07:00
|
|
|
const struct drm_display_mode *mode,
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_encoder_mode_set(struct drm_encoder *encoder,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_encoder_prepare(struct drm_encoder *encoder)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_encoder_commit(struct drm_encoder *encoder)
|
|
|
|
{
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static const struct drm_encoder_helper_funcs ast_enc_helper_funcs = {
|
|
|
|
.dpms = ast_encoder_dpms,
|
|
|
|
.mode_fixup = ast_mode_fixup,
|
|
|
|
.prepare = ast_encoder_prepare,
|
|
|
|
.commit = ast_encoder_commit,
|
|
|
|
.mode_set = ast_encoder_mode_set,
|
|
|
|
};
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static int ast_encoder_init(struct drm_device *dev)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_encoder *ast_encoder;
|
|
|
|
|
|
|
|
ast_encoder = kzalloc(sizeof(struct ast_encoder), GFP_KERNEL);
|
|
|
|
if (!ast_encoder)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
drm_encoder_init(dev, &ast_encoder->base, &ast_enc_funcs,
|
|
|
|
DRM_MODE_ENCODER_DAC);
|
|
|
|
drm_encoder_helper_add(&ast_encoder->base, &ast_enc_helper_funcs);
|
|
|
|
|
|
|
|
ast_encoder->base.possible_crtcs = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_get_modes(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
struct ast_connector *ast_connector = to_ast_connector(connector);
|
|
|
|
struct edid *edid;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
|
|
|
|
if (edid) {
|
|
|
|
drm_mode_connector_update_edid_property(&ast_connector->base, edid);
|
|
|
|
ret = drm_add_edid_modes(connector, edid);
|
2012-08-15 16:32:37 +07:00
|
|
|
kfree(edid);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
return ret;
|
|
|
|
} else
|
|
|
|
drm_mode_connector_update_edid_property(&ast_connector->base, NULL);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_connector_destroy(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
struct ast_connector *ast_connector = to_ast_connector(connector);
|
|
|
|
ast_i2c_destroy(ast_connector->i2c);
|
|
|
|
drm_sysfs_connector_remove(connector);
|
|
|
|
drm_connector_cleanup(connector);
|
|
|
|
kfree(connector);
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_connector_status
|
|
|
|
ast_connector_detect(struct drm_connector *connector, bool force)
|
|
|
|
{
|
|
|
|
return connector_status_connected;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_connector_helper_funcs ast_connector_helper_funcs = {
|
|
|
|
.get_modes = ast_get_modes,
|
|
|
|
.best_encoder = ast_best_single_encoder,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct drm_connector_funcs ast_connector_funcs = {
|
|
|
|
.dpms = drm_helper_connector_dpms,
|
|
|
|
.detect = ast_connector_detect,
|
|
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
|
|
.destroy = ast_connector_destroy,
|
|
|
|
};
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static int ast_connector_init(struct drm_device *dev)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_connector *ast_connector;
|
|
|
|
struct drm_connector *connector;
|
|
|
|
struct drm_encoder *encoder;
|
|
|
|
|
|
|
|
ast_connector = kzalloc(sizeof(struct ast_connector), GFP_KERNEL);
|
|
|
|
if (!ast_connector)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
connector = &ast_connector->base;
|
|
|
|
drm_connector_init(dev, connector, &ast_connector_funcs, DRM_MODE_CONNECTOR_VGA);
|
|
|
|
|
|
|
|
drm_connector_helper_add(connector, &ast_connector_helper_funcs);
|
|
|
|
|
|
|
|
connector->interlace_allowed = 0;
|
|
|
|
connector->doublescan_allowed = 0;
|
|
|
|
|
|
|
|
drm_sysfs_connector_add(connector);
|
|
|
|
|
|
|
|
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
|
|
|
|
|
|
|
|
encoder = list_first_entry(&dev->mode_config.encoder_list, struct drm_encoder, head);
|
|
|
|
drm_mode_connector_attach_encoder(connector, encoder);
|
|
|
|
|
|
|
|
ast_connector->i2c = ast_i2c_create(dev);
|
|
|
|
if (!ast_connector->i2c)
|
|
|
|
DRM_ERROR("failed to add ddc bus for connector\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* allocate cursor cache and pin at start of VRAM */
|
2014-01-06 21:32:39 +07:00
|
|
|
static int ast_cursor_init(struct drm_device *dev)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_private *ast = dev->dev_private;
|
|
|
|
int size;
|
|
|
|
int ret;
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
struct ast_bo *bo;
|
|
|
|
uint64_t gpu_addr;
|
|
|
|
|
|
|
|
size = (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE) * AST_DEFAULT_HWC_NUM;
|
|
|
|
|
|
|
|
ret = ast_gem_create(dev, size, true, &obj);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
bo = gem_to_ast_bo(obj);
|
|
|
|
ret = ast_bo_reserve(bo, false);
|
|
|
|
if (unlikely(ret != 0))
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
ret = ast_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
|
|
|
|
ast_bo_unreserve(bo);
|
|
|
|
if (ret)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
/* kmap the object */
|
|
|
|
ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &ast->cache_kmap);
|
|
|
|
if (ret)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
ast->cursor_cache = obj;
|
|
|
|
ast->cursor_cache_gpu_addr = gpu_addr;
|
2012-09-03 04:22:16 +07:00
|
|
|
DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
return 0;
|
|
|
|
fail:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static void ast_cursor_fini(struct drm_device *dev)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_private *ast = dev->dev_private;
|
|
|
|
ttm_bo_kunmap(&ast->cache_kmap);
|
|
|
|
drm_gem_object_unreference_unlocked(ast->cursor_cache);
|
|
|
|
}
|
|
|
|
|
|
|
|
int ast_mode_init(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
ast_cursor_init(dev);
|
|
|
|
ast_crtc_init(dev);
|
|
|
|
ast_encoder_init(dev);
|
|
|
|
ast_connector_init(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ast_mode_fini(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
ast_cursor_fini(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int get_clock(void *i2c_priv)
|
|
|
|
{
|
|
|
|
struct ast_i2c_chan *i2c = i2c_priv;
|
|
|
|
struct ast_private *ast = i2c->dev->dev_private;
|
|
|
|
uint32_t val;
|
|
|
|
|
|
|
|
val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4;
|
|
|
|
return val & 1 ? 1 : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int get_data(void *i2c_priv)
|
|
|
|
{
|
|
|
|
struct ast_i2c_chan *i2c = i2c_priv;
|
|
|
|
struct ast_private *ast = i2c->dev->dev_private;
|
|
|
|
uint32_t val;
|
|
|
|
|
|
|
|
val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5;
|
|
|
|
return val & 1 ? 1 : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_clock(void *i2c_priv, int clock)
|
|
|
|
{
|
|
|
|
struct ast_i2c_chan *i2c = i2c_priv;
|
|
|
|
struct ast_private *ast = i2c->dev->dev_private;
|
|
|
|
int i;
|
|
|
|
u8 ujcrb7, jtemp;
|
|
|
|
|
|
|
|
for (i = 0; i < 0x10000; i++) {
|
|
|
|
ujcrb7 = ((clock & 0x01) ? 0 : 1);
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7);
|
|
|
|
jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01);
|
|
|
|
if (ujcrb7 == jtemp)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_data(void *i2c_priv, int data)
|
|
|
|
{
|
|
|
|
struct ast_i2c_chan *i2c = i2c_priv;
|
|
|
|
struct ast_private *ast = i2c->dev->dev_private;
|
|
|
|
int i;
|
|
|
|
u8 ujcrb7, jtemp;
|
|
|
|
|
|
|
|
for (i = 0; i < 0x10000; i++) {
|
|
|
|
ujcrb7 = ((data & 0x01) ? 0 : 1) << 2;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7);
|
|
|
|
jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04);
|
|
|
|
if (ujcrb7 == jtemp)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct ast_i2c_chan *i2c;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
i2c = kzalloc(sizeof(struct ast_i2c_chan), GFP_KERNEL);
|
|
|
|
if (!i2c)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
i2c->adapter.owner = THIS_MODULE;
|
|
|
|
i2c->adapter.class = I2C_CLASS_DDC;
|
|
|
|
i2c->adapter.dev.parent = &dev->pdev->dev;
|
|
|
|
i2c->dev = dev;
|
|
|
|
i2c_set_adapdata(&i2c->adapter, i2c);
|
|
|
|
snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
|
|
|
|
"AST i2c bit bus");
|
|
|
|
i2c->adapter.algo_data = &i2c->bit;
|
|
|
|
|
|
|
|
i2c->bit.udelay = 20;
|
|
|
|
i2c->bit.timeout = 2;
|
|
|
|
i2c->bit.data = i2c;
|
|
|
|
i2c->bit.setsda = set_data;
|
|
|
|
i2c->bit.setscl = set_clock;
|
|
|
|
i2c->bit.getsda = get_data;
|
|
|
|
i2c->bit.getscl = get_clock;
|
|
|
|
ret = i2c_bit_add_bus(&i2c->adapter);
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("Failed to register bit i2c\n");
|
|
|
|
goto out_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
return i2c;
|
|
|
|
out_free:
|
|
|
|
kfree(i2c);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ast_i2c_destroy(struct ast_i2c_chan *i2c)
|
|
|
|
{
|
|
|
|
if (!i2c)
|
|
|
|
return;
|
|
|
|
i2c_del_adapter(&i2c->adapter);
|
|
|
|
kfree(i2c);
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static void ast_show_cursor(struct drm_crtc *crtc)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
u8 jreg;
|
|
|
|
|
|
|
|
jreg = 0x2;
|
|
|
|
/* enable ARGB cursor */
|
|
|
|
jreg |= 1;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
|
|
|
|
}
|
|
|
|
|
2014-01-06 21:32:39 +07:00
|
|
|
static void ast_hide_cursor(struct drm_crtc *crtc)
|
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.
This driver is intended to be used with xf86-video-modesetting in userspace.
This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.
This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.
v2: add s/r support, fix Kconfig.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 20:40:04 +07:00
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, 0x00);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height)
|
|
|
|
{
|
|
|
|
union {
|
|
|
|
u32 ul;
|
|
|
|
u8 b[4];
|
|
|
|
} srcdata32[2], data32;
|
|
|
|
union {
|
|
|
|
u16 us;
|
|
|
|
u8 b[2];
|
|
|
|
} data16;
|
|
|
|
u32 csum = 0;
|
|
|
|
s32 alpha_dst_delta, last_alpha_dst_delta;
|
|
|
|
u8 *srcxor, *dstxor;
|
|
|
|
int i, j;
|
|
|
|
u32 per_pixel_copy, two_pixel_copy;
|
|
|
|
|
|
|
|
alpha_dst_delta = AST_MAX_HWC_WIDTH << 1;
|
|
|
|
last_alpha_dst_delta = alpha_dst_delta - (width << 1);
|
|
|
|
|
|
|
|
srcxor = src;
|
|
|
|
dstxor = (u8 *)dst + last_alpha_dst_delta + (AST_MAX_HWC_HEIGHT - height) * alpha_dst_delta;
|
|
|
|
per_pixel_copy = width & 1;
|
|
|
|
two_pixel_copy = width >> 1;
|
|
|
|
|
|
|
|
for (j = 0; j < height; j++) {
|
|
|
|
for (i = 0; i < two_pixel_copy; i++) {
|
|
|
|
srcdata32[0].ul = *((u32 *)srcxor) & 0xf0f0f0f0;
|
|
|
|
srcdata32[1].ul = *((u32 *)(srcxor + 4)) & 0xf0f0f0f0;
|
|
|
|
data32.b[0] = srcdata32[0].b[1] | (srcdata32[0].b[0] >> 4);
|
|
|
|
data32.b[1] = srcdata32[0].b[3] | (srcdata32[0].b[2] >> 4);
|
|
|
|
data32.b[2] = srcdata32[0].b[1] | (srcdata32[1].b[0] >> 4);
|
|
|
|
data32.b[3] = srcdata32[0].b[3] | (srcdata32[1].b[2] >> 4);
|
|
|
|
|
|
|
|
writel(data32.ul, dstxor);
|
|
|
|
csum += data32.ul;
|
|
|
|
|
|
|
|
dstxor += 4;
|
|
|
|
srcxor += 8;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < per_pixel_copy; i++) {
|
|
|
|
srcdata32[0].ul = *((u32 *)srcxor) & 0xf0f0f0f0;
|
|
|
|
data16.b[0] = srcdata32[0].b[1] | (srcdata32[0].b[0] >> 4);
|
|
|
|
data16.b[1] = srcdata32[0].b[3] | (srcdata32[0].b[2] >> 4);
|
|
|
|
writew(data16.us, dstxor);
|
|
|
|
csum += (u32)data16.us;
|
|
|
|
|
|
|
|
dstxor += 2;
|
|
|
|
srcxor += 4;
|
|
|
|
}
|
|
|
|
dstxor += last_alpha_dst_delta;
|
|
|
|
}
|
|
|
|
return csum;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_cursor_set(struct drm_crtc *crtc,
|
|
|
|
struct drm_file *file_priv,
|
|
|
|
uint32_t handle,
|
|
|
|
uint32_t width,
|
|
|
|
uint32_t height)
|
|
|
|
{
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
|
|
|
|
struct drm_gem_object *obj;
|
|
|
|
struct ast_bo *bo;
|
|
|
|
uint64_t gpu_addr;
|
|
|
|
u32 csum;
|
|
|
|
int ret;
|
|
|
|
struct ttm_bo_kmap_obj uobj_map;
|
|
|
|
u8 *src, *dst;
|
|
|
|
bool src_isiomem, dst_isiomem;
|
|
|
|
if (!handle) {
|
|
|
|
ast_hide_cursor(crtc);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (width > AST_MAX_HWC_WIDTH || height > AST_MAX_HWC_HEIGHT)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
|
|
|
|
if (!obj) {
|
|
|
|
DRM_ERROR("Cannot find cursor object %x for crtc\n", handle);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
bo = gem_to_ast_bo(obj);
|
|
|
|
|
|
|
|
ret = ast_bo_reserve(bo, false);
|
|
|
|
if (ret)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &uobj_map);
|
|
|
|
|
|
|
|
src = ttm_kmap_obj_virtual(&uobj_map, &src_isiomem);
|
|
|
|
dst = ttm_kmap_obj_virtual(&ast->cache_kmap, &dst_isiomem);
|
|
|
|
|
|
|
|
if (src_isiomem == true)
|
|
|
|
DRM_ERROR("src cursor bo should be in main memory\n");
|
|
|
|
if (dst_isiomem == false)
|
|
|
|
DRM_ERROR("dst bo should be in VRAM\n");
|
|
|
|
|
|
|
|
dst += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
|
|
|
|
|
|
|
|
/* do data transfer to cursor cache */
|
|
|
|
csum = copy_cursor_image(src, dst, width, height);
|
|
|
|
|
|
|
|
/* write checksum + signature */
|
|
|
|
ttm_bo_kunmap(&uobj_map);
|
|
|
|
ast_bo_unreserve(bo);
|
|
|
|
{
|
|
|
|
u8 *dst = (u8 *)ast->cache_kmap.virtual + (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor + AST_HWC_SIZE;
|
|
|
|
writel(csum, dst);
|
|
|
|
writel(width, dst + AST_HWC_SIGNATURE_SizeX);
|
|
|
|
writel(height, dst + AST_HWC_SIGNATURE_SizeY);
|
|
|
|
writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTX);
|
|
|
|
writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTY);
|
|
|
|
|
|
|
|
/* set pattern offset */
|
|
|
|
gpu_addr = ast->cursor_cache_gpu_addr;
|
|
|
|
gpu_addr += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
|
|
|
|
gpu_addr >>= 3;
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc8, gpu_addr & 0xff);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc9, (gpu_addr >> 8) & 0xff);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xca, (gpu_addr >> 16) & 0xff);
|
|
|
|
}
|
|
|
|
ast_crtc->cursor_width = width;
|
|
|
|
ast_crtc->cursor_height = height;
|
|
|
|
ast_crtc->offset_x = AST_MAX_HWC_WIDTH - width;
|
|
|
|
ast_crtc->offset_y = AST_MAX_HWC_WIDTH - height;
|
|
|
|
|
|
|
|
ast->next_cursor = (ast->next_cursor + 1) % AST_DEFAULT_HWC_NUM;
|
|
|
|
|
|
|
|
ast_show_cursor(crtc);
|
|
|
|
|
|
|
|
drm_gem_object_unreference_unlocked(obj);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
|
|
drm_gem_object_unreference_unlocked(obj);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ast_cursor_move(struct drm_crtc *crtc,
|
|
|
|
int x, int y)
|
|
|
|
{
|
|
|
|
struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
|
|
|
|
struct ast_private *ast = crtc->dev->dev_private;
|
|
|
|
int x_offset, y_offset;
|
|
|
|
u8 *sig;
|
|
|
|
|
|
|
|
sig = (u8 *)ast->cache_kmap.virtual + (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor + AST_HWC_SIZE;
|
|
|
|
writel(x, sig + AST_HWC_SIGNATURE_X);
|
|
|
|
writel(y, sig + AST_HWC_SIGNATURE_Y);
|
|
|
|
|
|
|
|
x_offset = ast_crtc->offset_x;
|
|
|
|
y_offset = ast_crtc->offset_y;
|
|
|
|
if (x < 0) {
|
|
|
|
x_offset = (-x) + ast_crtc->offset_x;
|
|
|
|
x = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (y < 0) {
|
|
|
|
y_offset = (-y) + ast_crtc->offset_y;
|
|
|
|
y = 0;
|
|
|
|
}
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc2, x_offset);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc3, y_offset);
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc4, (x & 0xff));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc5, ((x >> 8) & 0x0f));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc6, (y & 0xff));
|
|
|
|
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
|
|
|
|
|
|
|
|
/* dummy write to fire HWC */
|
|
|
|
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|