linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/omap_drv.c

973 lines
22 KiB
C
Raw Normal View History

staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
/*
* drivers/gpu/drm/omapdrm/omap_drv.c
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
*
* Copyright (C) 2011 Texas Instruments
* Author: Rob Clark <rob@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/wait.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
#define DRIVER_NAME MODULE_NAME
#define DRIVER_DESC "OMAP DRM"
#define DRIVER_DATE "20110917"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
#define DRIVER_PATCHLEVEL 0
static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS;
MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs");
module_param(num_crtc, int, 0600);
/*
* mode config funcs
*/
/* Notes about mapping DSS and DRM entities:
* CRTC: overlay
* encoder: manager.. with some extension to allow one primary CRTC
* and zero or more video CRTC's to be mapped to one encoder?
* connector: dssdev.. manager can be attached/detached from different
* devices
*/
static void omap_fb_output_poll_changed(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
DBG("dev=%p", dev);
if (priv->fbdev)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
drm_fb_helper_hotplug_event(priv->fbdev);
}
struct omap_atomic_state_commit {
struct work_struct work;
struct drm_device *dev;
struct drm_atomic_state *state;
u32 crtcs;
};
static void omap_atomic_wait_for_completion(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc_state *old_crtc_state;
struct drm_crtc *crtc;
unsigned int i;
int ret;
for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
if (!crtc->state->enable)
continue;
ret = omap_crtc_wait_pending(crtc);
if (!ret)
dev_warn(dev->dev,
"atomic complete timeout (pipe %u)!\n", i);
}
}
static void omap_atomic_complete(struct omap_atomic_state_commit *commit)
{
struct drm_device *dev = commit->dev;
struct omap_drm_private *priv = dev->dev_private;
struct drm_atomic_state *old_state = commit->state;
/* Apply the atomic update. */
dispc_runtime_get();
drm_atomic_helper_commit_modeset_disables(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state,
DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
omap_atomic_wait_for_completion(dev, old_state);
drm_atomic_helper_cleanup_planes(dev, old_state);
dispc_runtime_put();
drm_atomic_state_put(old_state);
/* Complete the commit, wake up any waiter. */
spin_lock(&priv->commit.lock);
priv->commit.pending &= ~commit->crtcs;
spin_unlock(&priv->commit.lock);
wake_up_all(&priv->commit.wait);
kfree(commit);
}
static void omap_atomic_work(struct work_struct *work)
{
struct omap_atomic_state_commit *commit =
container_of(work, struct omap_atomic_state_commit, work);
omap_atomic_complete(commit);
}
static bool omap_atomic_is_pending(struct omap_drm_private *priv,
struct omap_atomic_state_commit *commit)
{
bool pending;
spin_lock(&priv->commit.lock);
pending = priv->commit.pending & commit->crtcs;
spin_unlock(&priv->commit.lock);
return pending;
}
static int omap_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state, bool nonblock)
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_atomic_state_commit *commit;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i, ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
/* Allocate the commit object. */
commit = kzalloc(sizeof(*commit), GFP_KERNEL);
if (commit == NULL) {
ret = -ENOMEM;
goto error;
}
INIT_WORK(&commit->work, omap_atomic_work);
commit->dev = dev;
commit->state = state;
/* Wait until all affected CRTCs have completed previous commits and
* mark them as pending.
*/
for_each_crtc_in_state(state, crtc, crtc_state, i)
commit->crtcs |= drm_crtc_mask(crtc);
wait_event(priv->commit.wait, !omap_atomic_is_pending(priv, commit));
spin_lock(&priv->commit.lock);
priv->commit.pending |= commit->crtcs;
spin_unlock(&priv->commit.lock);
/* Swap the state, this is the point of no return. */
drm_atomic_helper_swap_state(state, true);
drm_atomic_state_get(state);
if (nonblock)
schedule_work(&commit->work);
else
omap_atomic_complete(commit);
return 0;
error:
drm_atomic_helper_cleanup_planes(dev, state);
return ret;
}
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
.fb_create = omap_framebuffer_create,
.output_poll_changed = omap_fb_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = omap_atomic_commit,
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
};
static int get_connector_type(struct omap_dss_device *dssdev)
{
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_HDMI:
return DRM_MODE_CONNECTOR_HDMIA;
case OMAP_DISPLAY_TYPE_DVI:
return DRM_MODE_CONNECTOR_DVID;
case OMAP_DISPLAY_TYPE_DSI:
return DRM_MODE_CONNECTOR_DSI;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
default:
return DRM_MODE_CONNECTOR_Unknown;
}
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
static bool channel_used(struct drm_device *dev, enum omap_channel channel)
{
struct omap_drm_private *priv = dev->dev_private;
int i;
for (i = 0; i < priv->num_crtcs; i++) {
struct drm_crtc *crtc = priv->crtcs[i];
if (omap_crtc_channel(crtc) == channel)
return true;
}
return false;
}
static void omap_disconnect_dssdevs(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev)
dssdev->driver->disconnect(dssdev);
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
drm/omap: fix: Defer probe if an omapdss device requests for it at connect With the omapdss device model changes. omapdrm is required to call dssdriver's connect() op to register a panel. This is currently done in omap_modeset_init() A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI) they connect to have some resource(like regulators, I2C adapter) missing. If this happens, the correct approach is to defer omapdrm's probe. omapdrm currently ignores those panels which return a non zero value when connected. This could result in omapdrm ignoring all panels on an omap board. The right approach would be for omapdrm to request for probe deferral when a panel's connect op returns -EPROBE_DEFER. In order to do this, we need to call connect() much earlier during omapdrm's probe to prevent too many things are already done by then. We now connect the panels during pdev_probe(), before anything else is initialized, so that we don't need to undo too many things if a defer was requested. Now when we enter omap_modeset_init(), we have a set of panels that have been connected. We now proceed with registering only those panels that are already connected. A special case has to be considered when no panels are available to connect when omapdrm probes. In this case too, we defer probe and expect that a panel will be available to connect the next time. Checking whether the panel has a driver or whether it has get_timing/read_edid ops in omap_modeset_init() are redundant with the new display model. These can be removed since a dssdev device will always have a driver associated with it, and all dssdev drivers have a get_timings op. This will mainly fix cases when omapdrm is built-in the kernel, since that's generally where resources like regulators or I2C are unavailable because of probe order dependencies. In particular this fixes boot with omapdrm built-in on an omap4 panda ES board. The regulators used by HDMI(provided by I2C based TWL regulators) aren't initialized because I2C isn't initialized, I2C isn't initialized as it's pins are not configured because pinctrl is yet to probe. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 16:19:51 +07:00
static int omap_connect_dssdevs(void)
{
int r;
struct omap_dss_device *dssdev = NULL;
bool no_displays = true;
for_each_dss_dev(dssdev) {
r = dssdev->driver->connect(dssdev);
if (r == -EPROBE_DEFER) {
omap_dss_put_device(dssdev);
goto cleanup;
} else if (r) {
dev_warn(dssdev->dev, "could not connect display: %s\n",
dssdev->name);
} else {
no_displays = false;
}
}
if (no_displays)
return -EPROBE_DEFER;
return 0;
cleanup:
/*
* if we are deferring probe, we disconnect the devices we previously
* connected
*/
omap_disconnect_dssdevs();
drm/omap: fix: Defer probe if an omapdss device requests for it at connect With the omapdss device model changes. omapdrm is required to call dssdriver's connect() op to register a panel. This is currently done in omap_modeset_init() A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI) they connect to have some resource(like regulators, I2C adapter) missing. If this happens, the correct approach is to defer omapdrm's probe. omapdrm currently ignores those panels which return a non zero value when connected. This could result in omapdrm ignoring all panels on an omap board. The right approach would be for omapdrm to request for probe deferral when a panel's connect op returns -EPROBE_DEFER. In order to do this, we need to call connect() much earlier during omapdrm's probe to prevent too many things are already done by then. We now connect the panels during pdev_probe(), before anything else is initialized, so that we don't need to undo too many things if a defer was requested. Now when we enter omap_modeset_init(), we have a set of panels that have been connected. We now proceed with registering only those panels that are already connected. A special case has to be considered when no panels are available to connect when omapdrm probes. In this case too, we defer probe and expect that a panel will be available to connect the next time. Checking whether the panel has a driver or whether it has get_timing/read_edid ops in omap_modeset_init() are redundant with the new display model. These can be removed since a dssdev device will always have a driver associated with it, and all dssdev drivers have a get_timings op. This will mainly fix cases when omapdrm is built-in the kernel, since that's generally where resources like regulators or I2C are unavailable because of probe order dependencies. In particular this fixes boot with omapdrm built-in on an omap4 panda ES board. The regulators used by HDMI(provided by I2C based TWL regulators) aren't initialized because I2C isn't initialized, I2C isn't initialized as it's pins are not configured because pinctrl is yet to probe. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 16:19:51 +07:00
return r;
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
static int omap_modeset_create_crtc(struct drm_device *dev, int id,
enum omap_channel channel,
u32 possible_crtcs)
{
struct omap_drm_private *priv = dev->dev_private;
struct drm_plane *plane;
struct drm_crtc *crtc;
plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY,
possible_crtcs);
if (IS_ERR(plane))
return PTR_ERR(plane);
crtc = omap_crtc_init(dev, plane, channel, id);
BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
priv->crtcs[id] = crtc;
priv->num_crtcs++;
priv->planes[id] = plane;
priv->num_planes++;
return 0;
}
static int omap_modeset_init_properties(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0, 3);
if (!priv->zorder_prop)
return -ENOMEM;
return 0;
}
static int omap_modeset_init(struct drm_device *dev)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_dss_device *dssdev = NULL;
int num_ovls = dss_feat_get_num_ovls();
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
int num_mgrs = dss_feat_get_num_mgrs();
int num_crtcs;
int i, id = 0;
int ret;
u32 possible_crtcs;
drm_mode_config_init(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
ret = omap_modeset_init_properties(dev);
if (ret < 0)
return ret;
/*
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
* We usually don't want to create a CRTC for each manager, at least
* not until we have a way to expose private planes to userspace.
* Otherwise there would not be enough video pipes left for drm planes.
* We use the num_crtc argument to limit the number of crtcs we create.
*/
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
num_crtcs = min3(num_crtc, num_mgrs, num_ovls);
possible_crtcs = (1 << num_crtcs) - 1;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
dssdev = NULL;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
for_each_dss_dev(dssdev) {
struct drm_connector *connector;
struct drm_encoder *encoder;
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
enum omap_channel channel;
struct omap_dss_device *out;
drm/omap: fix: Defer probe if an omapdss device requests for it at connect With the omapdss device model changes. omapdrm is required to call dssdriver's connect() op to register a panel. This is currently done in omap_modeset_init() A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI) they connect to have some resource(like regulators, I2C adapter) missing. If this happens, the correct approach is to defer omapdrm's probe. omapdrm currently ignores those panels which return a non zero value when connected. This could result in omapdrm ignoring all panels on an omap board. The right approach would be for omapdrm to request for probe deferral when a panel's connect op returns -EPROBE_DEFER. In order to do this, we need to call connect() much earlier during omapdrm's probe to prevent too many things are already done by then. We now connect the panels during pdev_probe(), before anything else is initialized, so that we don't need to undo too many things if a defer was requested. Now when we enter omap_modeset_init(), we have a set of panels that have been connected. We now proceed with registering only those panels that are already connected. A special case has to be considered when no panels are available to connect when omapdrm probes. In this case too, we defer probe and expect that a panel will be available to connect the next time. Checking whether the panel has a driver or whether it has get_timing/read_edid ops in omap_modeset_init() are redundant with the new display model. These can be removed since a dssdev device will always have a driver associated with it, and all dssdev drivers have a get_timings op. This will mainly fix cases when omapdrm is built-in the kernel, since that's generally where resources like regulators or I2C are unavailable because of probe order dependencies. In particular this fixes boot with omapdrm built-in on an omap4 panda ES board. The regulators used by HDMI(provided by I2C based TWL regulators) aren't initialized because I2C isn't initialized, I2C isn't initialized as it's pins are not configured because pinctrl is yet to probe. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 16:19:51 +07:00
if (!omapdss_device_is_connected(dssdev))
continue;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 20:23:32 +07:00
encoder = omap_encoder_init(dev, dssdev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
if (!encoder) {
dev_err(dev->dev, "could not create encoder: %s\n",
dssdev->name);
return -ENOMEM;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
connector = omap_connector_init(dev,
get_connector_type(dssdev), dssdev, encoder);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
if (!connector) {
dev_err(dev->dev, "could not create connector: %s\n",
dssdev->name);
return -ENOMEM;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
priv->encoders[priv->num_encoders++] = encoder;
priv->connectors[priv->num_connectors++] = connector;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
drm_mode_connector_attach_encoder(connector, encoder);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
/*
* if we have reached the limit of the crtcs we are allowed to
* create, let's not try to look for a crtc for this
* panel/encoder and onwards, we will, of course, populate the
* the possible_crtcs field for all the encoders with the final
* set of crtcs we create
*/
if (id == num_crtcs)
continue;
/*
* get the recommended DISPC channel for this encoder. For now,
* we only try to get create a crtc out of the recommended, the
* other possible channels to which the encoder can connect are
* not considered.
*/
out = omapdss_find_output_from_display(dssdev);
channel = out->dispc_channel;
omap_dss_put_device(out);
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
/*
* if this channel hasn't already been taken by a previously
* allocated crtc, we create a new crtc for it
*/
if (!channel_used(dev, channel)) {
ret = omap_modeset_create_crtc(dev, id, channel,
possible_crtcs);
if (ret < 0) {
dev_err(dev->dev,
"could not create CRTC (channel %u)\n",
channel);
return ret;
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
id++;
}
}
/*
* we have allocated crtcs according to the need of the panels/encoders,
* adding more crtcs here if needed
*/
for (; id < num_crtcs; id++) {
/* find a free manager for this crtc */
for (i = 0; i < num_mgrs; i++) {
if (!channel_used(dev, i))
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
break;
}
if (i == num_mgrs) {
/* this shouldn't really happen */
dev_err(dev->dev, "no managers left for crtc\n");
return -ENOMEM;
}
ret = omap_modeset_create_crtc(dev, id, i,
possible_crtcs);
if (ret < 0) {
dev_err(dev->dev,
"could not create CRTC (channel %u)\n", i);
return ret;
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
}
/*
* Create normal planes for the remaining overlays:
*/
for (; id < num_ovls; id++) {
struct drm_plane *plane;
plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY,
possible_crtcs);
if (IS_ERR(plane))
return PTR_ERR(plane);
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
priv->planes[priv->num_planes++] = plane;
}
for (i = 0; i < priv->num_encoders; i++) {
struct drm_encoder *encoder = priv->encoders[i];
struct omap_dss_device *dssdev =
omap_encoder_get_dssdev(encoder);
struct omap_dss_device *output;
output = omapdss_find_output_from_display(dssdev);
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
/* figure out which crtc's we can connect the encoder to: */
encoder->possible_crtcs = 0;
for (id = 0; id < priv->num_crtcs; id++) {
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
struct drm_crtc *crtc = priv->crtcs[id];
enum omap_channel crtc_channel;
crtc_channel = omap_crtc_channel(crtc);
if (output->dispc_channel == crtc_channel) {
encoder->possible_crtcs |= (1 << id);
break;
}
}
omap_dss_put_device(output);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 20:45:19 +07:00
DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n",
priv->num_planes, priv->num_crtcs, priv->num_encoders,
priv->num_connectors);
dev->mode_config.min_width = 32;
dev->mode_config.min_height = 32;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
/* note: eventually will need some cpu_is_omapXYZ() type stuff here
* to fill in these limits properly on different OMAP generations..
*/
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
dev->mode_config.funcs = &omap_mode_config_funcs;
drm_mode_config_reset(dev);
omap_drm_irq_install(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return 0;
}
static void omap_modeset_free(struct drm_device *dev)
{
drm_mode_config_cleanup(dev);
}
/*
* drm ioctl funcs
*/
static int ioctl_get_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct omap_drm_private *priv = dev->dev_private;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
struct drm_omap_param *args = data;
DBG("%p: param=%llu", dev, args->param);
switch (args->param) {
case OMAP_PARAM_CHIPSET_ID:
args->value = priv->omaprev;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
break;
default:
DBG("unknown parameter %lld", args->param);
return -EINVAL;
}
return 0;
}
static int ioctl_set_param(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_param *args = data;
switch (args->param) {
default:
DBG("unknown parameter %lld", args->param);
return -EINVAL;
}
return 0;
}
#define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
static int ioctl_gem_new(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_new *args = data;
u32 flags = args->flags & OMAP_BO_USER_MASK;
VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
args->size.bytes, flags);
return omap_gem_new_handle(dev, file_priv, args->size, flags,
&args->handle);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_cpu_prep *args = data;
struct drm_gem_object *obj;
int ret;
VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return -ENOENT;
ret = omap_gem_op_sync(obj, args->op);
if (!ret)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
ret = omap_gem_op_start(obj, args->op);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_cpu_fini *args = data;
struct drm_gem_object *obj;
int ret;
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return -ENOENT;
/* XXX flushy, flushy */
ret = 0;
if (!ret)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
ret = omap_gem_op_finish(obj, args->op);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static int ioctl_gem_info(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_omap_gem_info *args = data;
struct drm_gem_object *obj;
int ret = 0;
VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
obj = drm_gem_object_lookup(file_priv, args->handle);
if (!obj)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return -ENOENT;
drm/omap: add GEM support for tiled/dmm buffers TILER/DMM provides two features for omapdrm GEM objects: 1) providing a physically contiguous view to discontiguous memory for hw initiators that cannot otherwise support discontiguous buffers (DSS scanout, IVAHD video decode/encode, etc) 2) providing untiling for 2d tiled buffers, which are used in some cases to provide rotation and reduce memory bandwidth for hw initiators that tend to access data in 2d block patterns. For 2d tiled buffers, there are some additional complications when it comes to userspace mmap'ings. For non-tiled buffers, the original (potentially physically discontiguous) pages are used to back the mmap. For tiled buffers, we need to mmap via the tiler/dmm region to provide an unswizzled view of the buffer. But (a) the buffer is not necessarily pinned in TILER all the time (it can be unmapped when there is no DMA access to the buffer), and (b) when they are they are pinned, they not necessarily page aligned from the perspective of the CPU. And non-page aligned userspace buffer mapping is evil. To solve this, we reserve one or more small regions in each of the 2d containers when the driver is loaded to use as a "user-GART" where we can create a second page-aligned mapping of parts of the buffer being accessed from userspace. Page faulting is used to evict and remap different regions of whichever buffers are being accessed from user- space. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-06 08:19:22 +07:00
args->size = omap_gem_mmap_size(obj);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
args->offset = omap_gem_mmap_offset(obj);
drm_gem_object_unreference_unlocked(obj);
return ret;
}
static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_AUTH),
DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_AUTH),
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
};
/*
* drm driver funcs
*/
/**
* load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
static int dev_load(struct drm_device *dev, unsigned long flags)
{
struct omap_drm_platform_data *pdata = dev->dev->platform_data;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
struct omap_drm_private *priv;
unsigned int i;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
int ret;
DBG("load: dev=%p", dev);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return -ENOMEM;
priv->omaprev = pdata->omaprev;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
dev->dev_private = priv;
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
init_waitqueue_head(&priv->commit.wait);
spin_lock_init(&priv->commit.lock);
spin_lock_init(&priv->list_lock);
INIT_LIST_HEAD(&priv->obj_list);
drm/omap: add GEM support for tiled/dmm buffers TILER/DMM provides two features for omapdrm GEM objects: 1) providing a physically contiguous view to discontiguous memory for hw initiators that cannot otherwise support discontiguous buffers (DSS scanout, IVAHD video decode/encode, etc) 2) providing untiling for 2d tiled buffers, which are used in some cases to provide rotation and reduce memory bandwidth for hw initiators that tend to access data in 2d block patterns. For 2d tiled buffers, there are some additional complications when it comes to userspace mmap'ings. For non-tiled buffers, the original (potentially physically discontiguous) pages are used to back the mmap. For tiled buffers, we need to mmap via the tiler/dmm region to provide an unswizzled view of the buffer. But (a) the buffer is not necessarily pinned in TILER all the time (it can be unmapped when there is no DMA access to the buffer), and (b) when they are they are pinned, they not necessarily page aligned from the perspective of the CPU. And non-page aligned userspace buffer mapping is evil. To solve this, we reserve one or more small regions in each of the 2d containers when the driver is loaded to use as a "user-GART" where we can create a second page-aligned mapping of parts of the buffer being accessed from userspace. Page faulting is used to evict and remap different regions of whichever buffers are being accessed from user- space. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-06 08:19:22 +07:00
omap_gem_init(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
ret = omap_modeset_init(dev);
if (ret) {
dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret);
dev->dev_private = NULL;
kfree(priv);
return ret;
}
/* Initialize vblank handling, start with all CRTCs disabled. */
ret = drm_vblank_init(dev, priv->num_crtcs);
if (ret)
dev_warn(dev->dev, "could not init vblank\n");
for (i = 0; i < priv->num_crtcs; i++)
drm_crtc_vblank_off(priv->crtcs[i]);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
priv->fbdev = omap_fbdev_init(dev);
/* store off drm_device for use in pm ops */
dev_set_drvdata(dev->dev, dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
drm_kms_helper_poll_init(dev);
return 0;
}
static int dev_unload(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
DBG("unload: dev=%p", dev);
drm_kms_helper_poll_fini(dev);
if (priv->fbdev)
omap_fbdev_free(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
omap_modeset_free(dev);
drm/omap: add GEM support for tiled/dmm buffers TILER/DMM provides two features for omapdrm GEM objects: 1) providing a physically contiguous view to discontiguous memory for hw initiators that cannot otherwise support discontiguous buffers (DSS scanout, IVAHD video decode/encode, etc) 2) providing untiling for 2d tiled buffers, which are used in some cases to provide rotation and reduce memory bandwidth for hw initiators that tend to access data in 2d block patterns. For 2d tiled buffers, there are some additional complications when it comes to userspace mmap'ings. For non-tiled buffers, the original (potentially physically discontiguous) pages are used to back the mmap. For tiled buffers, we need to mmap via the tiler/dmm region to provide an unswizzled view of the buffer. But (a) the buffer is not necessarily pinned in TILER all the time (it can be unmapped when there is no DMA access to the buffer), and (b) when they are they are pinned, they not necessarily page aligned from the perspective of the CPU. And non-page aligned userspace buffer mapping is evil. To solve this, we reserve one or more small regions in each of the 2d containers when the driver is loaded to use as a "user-GART" where we can create a second page-aligned mapping of parts of the buffer being accessed from userspace. Page faulting is used to evict and remap different regions of whichever buffers are being accessed from user- space. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-06 08:19:22 +07:00
omap_gem_deinit(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
destroy_workqueue(priv->wq);
drm_vblank_cleanup(dev);
omap_drm_irq_uninstall(dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
kfree(dev->dev_private);
dev->dev_private = NULL;
dev_set_drvdata(dev->dev, NULL);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return 0;
}
static int dev_open(struct drm_device *dev, struct drm_file *file)
{
file->driver_priv = NULL;
DBG("open: dev=%p, file=%p", dev, file);
return 0;
}
/**
* lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*/
static void dev_lastclose(struct drm_device *dev)
{
int i;
/* we don't support vga_switcheroo.. so just make sure the fbdev
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
* mode is active
*/
struct omap_drm_private *priv = dev->dev_private;
int ret;
DBG("lastclose: dev=%p", dev);
/* need to restore default rotation state.. not sure
* if there is a cleaner way to restore properties to
* default state? Maybe a flag that properties should
* automatically be restored to default state on
* lastclose?
*/
for (i = 0; i < priv->num_crtcs; i++) {
struct drm_crtc *crtc = priv->crtcs[i];
if (!crtc->primary->rotation_property)
continue;
drm_object_property_set_value(&crtc->base,
crtc->primary->rotation_property,
DRM_ROTATE_0);
}
for (i = 0; i < priv->num_planes; i++) {
struct drm_plane *plane = priv->planes[i];
if (!plane->rotation_property)
continue;
drm_object_property_set_value(&plane->base,
plane->rotation_property,
DRM_ROTATE_0);
}
if (priv->fbdev) {
ret = drm_fb_helper_restore_fbdev_mode_unlocked(priv->fbdev);
if (ret)
DBG("failed to restore crtc mode");
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
static const struct vm_operations_struct omap_gem_vm_ops = {
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
.fault = omap_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations omapdriver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.unlocked_ioctl = drm_ioctl,
.release = drm_release,
.mmap = omap_gem_mmap,
.poll = drm_poll,
.read = drm_read,
.llseek = noop_llseek,
};
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
static struct drm_driver omap_drm_driver = {
.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
DRIVER_ATOMIC,
.load = dev_load,
.unload = dev_unload,
.open = dev_open,
.lastclose = dev_lastclose,
.get_vblank_counter = drm_vblank_no_hw_counter,
.enable_vblank = omap_irq_enable_vblank,
.disable_vblank = omap_irq_disable_vblank,
#ifdef CONFIG_DEBUG_FS
.debugfs_init = omap_debugfs_init,
.debugfs_cleanup = omap_debugfs_cleanup,
#endif
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_export = omap_gem_prime_export,
.gem_prime_import = omap_gem_prime_import,
.gem_free_object = omap_gem_free_object,
.gem_vm_ops = &omap_gem_vm_ops,
.dumb_create = omap_gem_dumb_create,
.dumb_map_offset = omap_gem_dumb_map_offset,
.dumb_destroy = drm_gem_dumb_destroy,
.ioctls = ioctls,
.num_ioctls = DRM_OMAP_NUM_IOCTLS,
.fops = &omapdriver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
};
static int pdev_probe(struct platform_device *device)
{
drm/omap: fix: Defer probe if an omapdss device requests for it at connect With the omapdss device model changes. omapdrm is required to call dssdriver's connect() op to register a panel. This is currently done in omap_modeset_init() A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI) they connect to have some resource(like regulators, I2C adapter) missing. If this happens, the correct approach is to defer omapdrm's probe. omapdrm currently ignores those panels which return a non zero value when connected. This could result in omapdrm ignoring all panels on an omap board. The right approach would be for omapdrm to request for probe deferral when a panel's connect op returns -EPROBE_DEFER. In order to do this, we need to call connect() much earlier during omapdrm's probe to prevent too many things are already done by then. We now connect the panels during pdev_probe(), before anything else is initialized, so that we don't need to undo too many things if a defer was requested. Now when we enter omap_modeset_init(), we have a set of panels that have been connected. We now proceed with registering only those panels that are already connected. A special case has to be considered when no panels are available to connect when omapdrm probes. In this case too, we defer probe and expect that a panel will be available to connect the next time. Checking whether the panel has a driver or whether it has get_timing/read_edid ops in omap_modeset_init() are redundant with the new display model. These can be removed since a dssdev device will always have a driver associated with it, and all dssdev drivers have a get_timings op. This will mainly fix cases when omapdrm is built-in the kernel, since that's generally where resources like regulators or I2C are unavailable because of probe order dependencies. In particular this fixes boot with omapdrm built-in on an omap4 panda ES board. The regulators used by HDMI(provided by I2C based TWL regulators) aren't initialized because I2C isn't initialized, I2C isn't initialized as it's pins are not configured because pinctrl is yet to probe. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 16:19:51 +07:00
int r;
if (omapdss_is_initialized() == false)
return -EPROBE_DEFER;
drm/omap: fix: Defer probe if an omapdss device requests for it at connect With the omapdss device model changes. omapdrm is required to call dssdriver's connect() op to register a panel. This is currently done in omap_modeset_init() A call to connect() can fail if the omapdss panels or the encoders(HDMI/DPI) they connect to have some resource(like regulators, I2C adapter) missing. If this happens, the correct approach is to defer omapdrm's probe. omapdrm currently ignores those panels which return a non zero value when connected. This could result in omapdrm ignoring all panels on an omap board. The right approach would be for omapdrm to request for probe deferral when a panel's connect op returns -EPROBE_DEFER. In order to do this, we need to call connect() much earlier during omapdrm's probe to prevent too many things are already done by then. We now connect the panels during pdev_probe(), before anything else is initialized, so that we don't need to undo too many things if a defer was requested. Now when we enter omap_modeset_init(), we have a set of panels that have been connected. We now proceed with registering only those panels that are already connected. A special case has to be considered when no panels are available to connect when omapdrm probes. In this case too, we defer probe and expect that a panel will be available to connect the next time. Checking whether the panel has a driver or whether it has get_timing/read_edid ops in omap_modeset_init() are redundant with the new display model. These can be removed since a dssdev device will always have a driver associated with it, and all dssdev drivers have a get_timings op. This will mainly fix cases when omapdrm is built-in the kernel, since that's generally where resources like regulators or I2C are unavailable because of probe order dependencies. In particular this fixes boot with omapdrm built-in on an omap4 panda ES board. The regulators used by HDMI(provided by I2C based TWL regulators) aren't initialized because I2C isn't initialized, I2C isn't initialized as it's pins are not configured because pinctrl is yet to probe. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-02 16:19:51 +07:00
omap_crtc_pre_init();
r = omap_connect_dssdevs();
if (r) {
omap_crtc_pre_uninit();
return r;
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
DBG("%s", device->name);
return drm_platform_init(&omap_drm_driver, device);
}
static int pdev_remove(struct platform_device *device)
{
DBG("");
drm_put_dev(platform_get_drvdata(device));
omap_disconnect_dssdevs();
omap_crtc_pre_uninit();
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int omap_drm_suspend_all_displays(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (!dssdev->driver)
continue;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
dssdev->driver->disable(dssdev);
dssdev->activate_after_resume = true;
} else {
dssdev->activate_after_resume = false;
}
}
return 0;
}
static int omap_drm_resume_all_displays(void)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (!dssdev->driver)
continue;
if (dssdev->activate_after_resume) {
dssdev->driver->enable(dssdev);
dssdev->activate_after_resume = false;
}
}
return 0;
}
static int omap_drm_suspend(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_kms_helper_poll_disable(drm_dev);
drm_modeset_lock_all(drm_dev);
omap_drm_suspend_all_displays();
drm_modeset_unlock_all(drm_dev);
return 0;
}
static int omap_drm_resume(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
drm_modeset_lock_all(drm_dev);
omap_drm_resume_all_displays();
drm_modeset_unlock_all(drm_dev);
drm_kms_helper_poll_enable(drm_dev);
return omap_gem_resume(dev);
}
#endif
static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume);
static struct platform_driver pdev = {
.driver = {
.name = DRIVER_NAME,
.pm = &omapdrm_pm_ops,
},
.probe = pdev_probe,
.remove = pdev_remove,
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
};
static struct platform_driver * const drivers[] = {
&omap_dmm_driver,
&pdev,
};
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
static int __init omap_drm_init(void)
{
DBG("init");
return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
static void __exit omap_drm_fini(void)
{
DBG("fini");
platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
/* need late_initcall() so we load after dss_driver's are loaded */
late_initcall(omap_drm_init);
module_exit(omap_drm_fini);
MODULE_AUTHOR("Rob Clark <rob@ti.com>");
MODULE_DESCRIPTION("OMAP DRM Display Driver");
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL v2");