linux_dsm_epyc7002/drivers/scsi/aacraid/commctrl.c

1117 lines
29 KiB
C
Raw Normal View History

/*
* Adaptec AAC series RAID controller driver
* (c) Copyright 2001 Red Hat Inc.
*
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
* Copyright (c) 2000-2010 Adaptec, Inc.
* 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
* 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Module Name:
* commctrl.c
*
* Abstract: Contains all routines for control of the AFA comm layer
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/delay.h> /* ssleep prototype */
#include <linux/kthread.h>
#include <linux/semaphore.h>
#include <linux/uaccess.h>
#include <scsi/scsi_host.h>
#include "aacraid.h"
/**
* ioctl_send_fib - send a FIB from userspace
* @dev: adapter is being processed
* @arg: arguments to the ioctl call
*
* This routine sends a fib to the adapter on behalf of a user level
* program.
*/
# define AAC_DEBUG_PREAMBLE KERN_INFO
# define AAC_DEBUG_POSTAMBLE
static int ioctl_send_fib(struct aac_dev * dev, void __user *arg)
{
struct hw_fib * kfib;
struct fib *fibptr;
struct hw_fib * hw_fib = (struct hw_fib *)0;
dma_addr_t hw_fib_pa = (dma_addr_t)0LL;
unsigned int size, osize;
int retval;
if (dev->in_reset) {
return -EBUSY;
}
fibptr = aac_fib_alloc(dev);
if(fibptr == NULL) {
return -ENOMEM;
}
kfib = fibptr->hw_fib_va;
/*
* First copy in the header so that we can check the size field.
*/
if (copy_from_user((void *)kfib, arg, sizeof(struct aac_fibhdr))) {
aac_fib_free(fibptr);
return -EFAULT;
}
/*
* Since we copy based on the fib header size, make sure that we
* will not overrun the buffer when we copy the memory. Return
* an error if we would.
*/
osize = size = le16_to_cpu(kfib->header.Size) +
sizeof(struct aac_fibhdr);
if (size < le16_to_cpu(kfib->header.SenderSize))
size = le16_to_cpu(kfib->header.SenderSize);
if (size > dev->max_fib_size) {
dma_addr_t daddr;
if (size > 2048) {
retval = -EINVAL;
goto cleanup;
}
kfib = dma_alloc_coherent(&dev->pdev->dev, size, &daddr,
GFP_KERNEL);
if (!kfib) {
retval = -ENOMEM;
goto cleanup;
}
/* Highjack the hw_fib */
hw_fib = fibptr->hw_fib_va;
hw_fib_pa = fibptr->hw_fib_pa;
fibptr->hw_fib_va = kfib;
fibptr->hw_fib_pa = daddr;
memset(((char *)kfib) + dev->max_fib_size, 0, size - dev->max_fib_size);
memcpy(kfib, hw_fib, dev->max_fib_size);
}
if (copy_from_user(kfib, arg, size)) {
retval = -EFAULT;
goto cleanup;
}
/* Sanity check the second copy */
if ((osize != le16_to_cpu(kfib->header.Size) +
sizeof(struct aac_fibhdr))
|| (size < le16_to_cpu(kfib->header.SenderSize))) {
retval = -EINVAL;
goto cleanup;
}
if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) {
aac_adapter_interrupt(dev);
/*
* Since we didn't really send a fib, zero out the state to allow
* cleanup code not to assert.
*/
kfib->header.XferState = 0;
} else {
retval = aac_fib_send(le16_to_cpu(kfib->header.Command), fibptr,
le16_to_cpu(kfib->header.Size) , FsaNormal,
1, 1, NULL, NULL);
if (retval) {
goto cleanup;
}
if (aac_fib_complete(fibptr) != 0) {
retval = -EINVAL;
goto cleanup;
}
}
/*
* Make sure that the size returned by the adapter (which includes
* the header) is less than or equal to the size of a fib, so we
* don't corrupt application data. Then copy that size to the user
* buffer. (Don't try to add the header information again, since it
* was already included by the adapter.)
*/
retval = 0;
if (copy_to_user(arg, (void *)kfib, size))
retval = -EFAULT;
cleanup:
if (hw_fib) {
dma_free_coherent(&dev->pdev->dev, size, kfib,
fibptr->hw_fib_pa);
fibptr->hw_fib_pa = hw_fib_pa;
fibptr->hw_fib_va = hw_fib;
}
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
if (retval != -ERESTARTSYS)
aac_fib_free(fibptr);
return retval;
}
/**
* open_getadapter_fib - Get the next fib
*
* This routine will get the next Fib, if available, from the AdapterFibContext
* passed in from the user.
*/
static int open_getadapter_fib(struct aac_dev * dev, void __user *arg)
{
struct aac_fib_context * fibctx;
int status;
fibctx = kmalloc(sizeof(struct aac_fib_context), GFP_KERNEL);
if (fibctx == NULL) {
status = -ENOMEM;
} else {
unsigned long flags;
struct list_head * entry;
struct aac_fib_context * context;
fibctx->type = FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT;
fibctx->size = sizeof(struct aac_fib_context);
/*
* Yes yes, I know this could be an index, but we have a
* better guarantee of uniqueness for the locked loop below.
* Without the aid of a persistent history, this also helps
* reduce the chance that the opaque context would be reused.
*/
fibctx->unique = (u32)((ulong)fibctx & 0xFFFFFFFF);
/*
* Initialize the mutex used to wait for the next AIF.
*/
sema_init(&fibctx->wait_sem, 0);
fibctx->wait = 0;
/*
* Initialize the fibs and set the count of fibs on
* the list to 0.
*/
fibctx->count = 0;
INIT_LIST_HEAD(&fibctx->fib_list);
fibctx->jiffies = jiffies/HZ;
/*
* Now add this context onto the adapter's
* AdapterFibContext list.
*/
spin_lock_irqsave(&dev->fib_lock, flags);
/* Ensure that we have a unique identifier */
entry = dev->fib_list.next;
while (entry != &dev->fib_list) {
context = list_entry(entry, struct aac_fib_context, next);
if (context->unique == fibctx->unique) {
/* Not unique (32 bits) */
fibctx->unique++;
entry = dev->fib_list.next;
} else {
entry = entry->next;
}
}
list_add_tail(&fibctx->next, &dev->fib_list);
spin_unlock_irqrestore(&dev->fib_lock, flags);
if (copy_to_user(arg, &fibctx->unique,
sizeof(fibctx->unique))) {
status = -EFAULT;
} else {
status = 0;
}
}
return status;
}
/**
* next_getadapter_fib - get the next fib
* @dev: adapter to use
* @arg: ioctl argument
*
* This routine will get the next Fib, if available, from the AdapterFibContext
* passed in from the user.
*/
static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)
{
struct fib_ioctl f;
struct fib *fib;
struct aac_fib_context *fibctx;
int status;
struct list_head * entry;
unsigned long flags;
if(copy_from_user((void *)&f, arg, sizeof(struct fib_ioctl)))
return -EFAULT;
/*
* Verify that the HANDLE passed in was a valid AdapterFibContext
*
* Search the list of AdapterFibContext addresses on the adapter
* to be sure this is a valid address
*/
spin_lock_irqsave(&dev->fib_lock, flags);
entry = dev->fib_list.next;
fibctx = NULL;
while (entry != &dev->fib_list) {
fibctx = list_entry(entry, struct aac_fib_context, next);
/*
* Extract the AdapterFibContext from the Input parameters.
*/
if (fibctx->unique == f.fibctx) { /* We found a winner */
break;
}
entry = entry->next;
fibctx = NULL;
}
if (!fibctx) {
spin_unlock_irqrestore(&dev->fib_lock, flags);
dprintk ((KERN_INFO "Fib Context not found\n"));
return -EINVAL;
}
if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
(fibctx->size != sizeof(struct aac_fib_context))) {
spin_unlock_irqrestore(&dev->fib_lock, flags);
dprintk ((KERN_INFO "Fib Context corrupt?\n"));
return -EINVAL;
}
status = 0;
/*
* If there are no fibs to send back, then either wait or return
* -EAGAIN
*/
return_fib:
if (!list_empty(&fibctx->fib_list)) {
/*
* Pull the next fib from the fibs
*/
entry = fibctx->fib_list.next;
list_del(entry);
fib = list_entry(entry, struct fib, fiblink);
fibctx->count--;
spin_unlock_irqrestore(&dev->fib_lock, flags);
if (copy_to_user(f.fib, fib->hw_fib_va, sizeof(struct hw_fib))) {
kfree(fib->hw_fib_va);
kfree(fib);
return -EFAULT;
}
/*
* Free the space occupied by this copy of the fib.
*/
kfree(fib->hw_fib_va);
kfree(fib);
status = 0;
} else {
spin_unlock_irqrestore(&dev->fib_lock, flags);
/* If someone killed the AIF aacraid thread, restart it */
status = !dev->aif_thread;
if (status && !dev->in_reset && dev->queues && dev->fsa_dev) {
/* Be paranoid, be very paranoid! */
kthread_stop(dev->thread);
ssleep(1);
dev->aif_thread = 0;
dev->thread = kthread_run(aac_command_thread, dev,
"%s", dev->name);
ssleep(1);
}
if (f.wait) {
if(down_interruptible(&fibctx->wait_sem) < 0) {
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
status = -ERESTARTSYS;
} else {
/* Lock again and retry */
spin_lock_irqsave(&dev->fib_lock, flags);
goto return_fib;
}
} else {
status = -EAGAIN;
}
}
fibctx->jiffies = jiffies/HZ;
return status;
}
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context * fibctx)
{
struct fib *fib;
/*
* First free any FIBs that have not been consumed.
*/
while (!list_empty(&fibctx->fib_list)) {
struct list_head * entry;
/*
* Pull the next fib from the fibs
*/
entry = fibctx->fib_list.next;
list_del(entry);
fib = list_entry(entry, struct fib, fiblink);
fibctx->count--;
/*
* Free the space occupied by this copy of the fib.
*/
kfree(fib->hw_fib_va);
kfree(fib);
}
/*
* Remove the Context from the AdapterFibContext List
*/
list_del(&fibctx->next);
/*
* Invalidate context
*/
fibctx->type = 0;
/*
* Free the space occupied by the Context
*/
kfree(fibctx);
return 0;
}
/**
* close_getadapter_fib - close down user fib context
* @dev: adapter
* @arg: ioctl arguments
*
* This routine will close down the fibctx passed in from the user.
*/
static int close_getadapter_fib(struct aac_dev * dev, void __user *arg)
{
struct aac_fib_context *fibctx;
int status;
unsigned long flags;
struct list_head * entry;
/*
* Verify that the HANDLE passed in was a valid AdapterFibContext
*
* Search the list of AdapterFibContext addresses on the adapter
* to be sure this is a valid address
*/
entry = dev->fib_list.next;
fibctx = NULL;
while(entry != &dev->fib_list) {
fibctx = list_entry(entry, struct aac_fib_context, next);
/*
* Extract the fibctx from the input parameters
*/
if (fibctx->unique == (u32)(uintptr_t)arg) /* We found a winner */
break;
entry = entry->next;
fibctx = NULL;
}
if (!fibctx)
return 0; /* Already gone */
if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
(fibctx->size != sizeof(struct aac_fib_context)))
return -EINVAL;
spin_lock_irqsave(&dev->fib_lock, flags);
status = aac_close_fib_context(dev, fibctx);
spin_unlock_irqrestore(&dev->fib_lock, flags);
return status;
}
/**
* check_revision - close down user fib context
* @dev: adapter
* @arg: ioctl arguments
*
* This routine returns the driver version.
* Under Linux, there have been no version incompatibilities, so this is
* simple!
*/
static int check_revision(struct aac_dev *dev, void __user *arg)
{
struct revision response;
char *driver_version = aac_driver_version;
u32 version;
response.compat = 1;
version = (simple_strtol(driver_version,
&driver_version, 10) << 24) | 0x00000400;
version += simple_strtol(driver_version + 1, &driver_version, 10) << 16;
version += simple_strtol(driver_version + 1, NULL, 10);
response.version = cpu_to_le32(version);
# ifdef AAC_DRIVER_BUILD
response.build = cpu_to_le32(AAC_DRIVER_BUILD);
# else
response.build = cpu_to_le32(9999);
# endif
if (copy_to_user(arg, &response, sizeof(response)))
return -EFAULT;
return 0;
}
/**
*
* aac_send_raw_scb
*
*/
static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
{
struct fib* srbfib;
int status;
struct aac_srb *srbcmd = NULL;
struct aac_hba_cmd_req *hbacmd = NULL;
struct user_aac_srb *user_srbcmd = NULL;
struct user_aac_srb __user *user_srb = arg;
struct aac_srb_reply __user *user_reply;
u32 chn;
u32 fibsize = 0;
u32 flags = 0;
s32 rcode = 0;
u32 data_dir;
void __user *sg_user[HBA_MAX_SG_EMBEDDED];
void *sg_list[HBA_MAX_SG_EMBEDDED];
u32 sg_count[HBA_MAX_SG_EMBEDDED];
u32 sg_indx = 0;
u32 byte_count = 0;
u32 actual_fibsize64, actual_fibsize = 0;
int i;
int is_native_device;
u64 address;
if (dev->in_reset) {
dprintk((KERN_DEBUG"aacraid: send raw srb -EBUSY\n"));
return -EBUSY;
}
if (!capable(CAP_SYS_ADMIN)){
dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n"));
return -EPERM;
}
/*
* Allocate and initialize a Fib then setup a SRB command
*/
if (!(srbfib = aac_fib_alloc(dev))) {
return -ENOMEM;
}
memset(sg_list, 0, sizeof(sg_list)); /* cleanup may take issue */
if(copy_from_user(&fibsize, &user_srb->count,sizeof(u32))){
dprintk((KERN_DEBUG"aacraid: Could not copy data size from user\n"));
rcode = -EFAULT;
goto cleanup;
}
if ((fibsize < (sizeof(struct user_aac_srb) - sizeof(struct user_sgentry))) ||
(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr)))) {
rcode = -EINVAL;
goto cleanup;
}
user_srbcmd = kmalloc(fibsize, GFP_KERNEL);
if (!user_srbcmd) {
dprintk((KERN_DEBUG"aacraid: Could not make a copy of the srb\n"));
rcode = -ENOMEM;
goto cleanup;
}
if(copy_from_user(user_srbcmd, user_srb,fibsize)){
dprintk((KERN_DEBUG"aacraid: Could not copy srb from user\n"));
rcode = -EFAULT;
goto cleanup;
}
flags = user_srbcmd->flags; /* from user in cpu order */
switch (flags & (SRB_DataIn | SRB_DataOut)) {
case SRB_DataOut:
data_dir = DMA_TO_DEVICE;
break;
case (SRB_DataIn | SRB_DataOut):
data_dir = DMA_BIDIRECTIONAL;
break;
case SRB_DataIn:
data_dir = DMA_FROM_DEVICE;
break;
default:
data_dir = DMA_NONE;
}
if (user_srbcmd->sg.count > ARRAY_SIZE(sg_list)) {
dprintk((KERN_DEBUG"aacraid: too many sg entries %d\n",
user_srbcmd->sg.count));
rcode = -EINVAL;
goto cleanup;
}
if ((data_dir == DMA_NONE) && user_srbcmd->sg.count) {
dprintk((KERN_DEBUG"aacraid:SG with no direction specified\n"));
rcode = -EINVAL;
goto cleanup;
}
actual_fibsize = sizeof(struct aac_srb) - sizeof(struct sgentry) +
((user_srbcmd->sg.count & 0xff) * sizeof(struct sgentry));
actual_fibsize64 = actual_fibsize + (user_srbcmd->sg.count & 0xff) *
(sizeof(struct sgentry64) - sizeof(struct sgentry));
/* User made a mistake - should not continue */
if ((actual_fibsize != fibsize) && (actual_fibsize64 != fibsize)) {
dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
"Raw SRB command calculated fibsize=%lu;%lu "
"user_srbcmd->sg.count=%d aac_srb=%lu sgentry=%lu;%lu "
"issued fibsize=%d\n",
actual_fibsize, actual_fibsize64, user_srbcmd->sg.count,
sizeof(struct aac_srb), sizeof(struct sgentry),
sizeof(struct sgentry64), fibsize));
rcode = -EINVAL;
goto cleanup;
}
chn = user_srbcmd->channel;
if (chn < AAC_MAX_BUSES && user_srbcmd->id < AAC_MAX_TARGETS &&
dev->hba_map[chn][user_srbcmd->id].devtype ==
AAC_DEVTYPE_NATIVE_RAW) {
is_native_device = 1;
hbacmd = (struct aac_hba_cmd_req *)srbfib->hw_fib_va;
memset(hbacmd, 0, 96); /* sizeof(*hbacmd) is not necessary */
/* iu_type is a parameter of aac_hba_send */
switch (data_dir) {
case DMA_TO_DEVICE:
hbacmd->byte1 = 2;
break;
case DMA_FROM_DEVICE:
case DMA_BIDIRECTIONAL:
hbacmd->byte1 = 1;
break;
case DMA_NONE:
default:
break;
}
hbacmd->lun[1] = cpu_to_le32(user_srbcmd->lun);
hbacmd->it_nexus = dev->hba_map[chn][user_srbcmd->id].rmw_nexus;
/*
* we fill in reply_qid later in aac_src_deliver_message
* we fill in iu_type, request_id later in aac_hba_send
* we fill in emb_data_desc_count, data_length later
* in sg list build
*/
memcpy(hbacmd->cdb, user_srbcmd->cdb, sizeof(hbacmd->cdb));
address = (u64)srbfib->hw_error_pa;
hbacmd->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
hbacmd->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
hbacmd->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
hbacmd->emb_data_desc_count =
cpu_to_le32(user_srbcmd->sg.count);
srbfib->hbacmd_size = 64 +
user_srbcmd->sg.count * sizeof(struct aac_hba_sgl);
} else {
is_native_device = 0;
aac_fib_init(srbfib);
/* raw_srb FIB is not FastResponseCapable */
srbfib->hw_fib_va->header.XferState &=
~cpu_to_le32(FastResponseCapable);
srbcmd = (struct aac_srb *) fib_data(srbfib);
// Fix up srb for endian and force some values
srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this
srbcmd->channel = cpu_to_le32(user_srbcmd->channel);
srbcmd->id = cpu_to_le32(user_srbcmd->id);
srbcmd->lun = cpu_to_le32(user_srbcmd->lun);
srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout);
srbcmd->flags = cpu_to_le32(flags);
srbcmd->retry_limit = 0; // Obsolete parameter
srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size);
memcpy(srbcmd->cdb, user_srbcmd->cdb, sizeof(srbcmd->cdb));
}
byte_count = 0;
if (is_native_device) {
struct user_sgmap *usg32 = &user_srbcmd->sg;
struct user_sgmap64 *usg64 =
(struct user_sgmap64 *)&user_srbcmd->sg;
for (i = 0; i < usg32->count; i++) {
void *p;
u64 addr;
sg_count[i] = (actual_fibsize64 == fibsize) ?
usg64->sg[i].count : usg32->sg[i].count;
if (sg_count[i] >
(dev->scsi_host_ptr->max_sectors << 9)) {
pr_err("aacraid: upsg->sg[%d].count=%u>%u\n",
i, sg_count[i],
dev->scsi_host_ptr->max_sectors << 9);
rcode = -EINVAL;
goto cleanup;
}
p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
if (!p) {
rcode = -ENOMEM;
goto cleanup;
}
if (actual_fibsize64 == fibsize) {
addr = (u64)usg64->sg[i].addr[0];
addr += ((u64)usg64->sg[i].addr[1]) << 32;
} else {
addr = (u64)usg32->sg[i].addr;
}
sg_user[i] = (void __user *)(uintptr_t)addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
if (flags & SRB_DataOut) {
if (copy_from_user(p, sg_user[i],
sg_count[i])) {
rcode = -EFAULT;
goto cleanup;
}
}
addr = pci_map_single(dev->pdev, p, sg_count[i],
data_dir);
hbacmd->sge[i].addr_hi = cpu_to_le32((u32)(addr>>32));
hbacmd->sge[i].addr_lo = cpu_to_le32(
(u32)(addr & 0xffffffff));
hbacmd->sge[i].len = cpu_to_le32(sg_count[i]);
hbacmd->sge[i].flags = 0;
byte_count += sg_count[i];
}
if (usg32->count > 0) /* embedded sglist */
hbacmd->sge[usg32->count-1].flags =
cpu_to_le32(0x40000000);
hbacmd->data_length = cpu_to_le32(byte_count);
status = aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ, srbfib,
NULL, NULL);
} else if (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64) {
struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg;
struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
/*
* This should also catch if user used the 32 bit sgmap
*/
if (actual_fibsize64 == fibsize) {
actual_fibsize = actual_fibsize64;
for (i = 0; i < upsg->count; i++) {
u64 addr;
void* p;
sg_count[i] = upsg->sg[i].count;
if (sg_count[i] >
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
65536)) {
rcode = -EINVAL;
goto cleanup;
}
/* Does this really need to be GFP_DMA? */
p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
if(!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, upsg->count));
rcode = -ENOMEM;
goto cleanup;
}
addr = (u64)upsg->sg[i].addr[0];
addr += ((u64)upsg->sg[i].addr[1]) << 32;
sg_user[i] = (void __user *)(uintptr_t)addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
if (flags & SRB_DataOut) {
if (copy_from_user(p, sg_user[i],
sg_count[i])){
dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
rcode = -EFAULT;
goto cleanup;
}
}
addr = pci_map_single(dev->pdev, p,
sg_count[i], data_dir);
psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
byte_count += sg_count[i];
psg->sg[i].count = cpu_to_le32(sg_count[i]);
}
} else {
struct user_sgmap* usg;
usg = kmemdup(upsg,
actual_fibsize - sizeof(struct aac_srb)
+ sizeof(struct sgmap), GFP_KERNEL);
if (!usg) {
dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
rcode = -ENOMEM;
goto cleanup;
}
actual_fibsize = actual_fibsize64;
for (i = 0; i < usg->count; i++) {
u64 addr;
void* p;
sg_count[i] = usg->sg[i].count;
if (sg_count[i] >
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
65536)) {
kfree(usg);
rcode = -EINVAL;
goto cleanup;
}
/* Does this really need to be GFP_DMA? */
p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
if(!p) {
dprintk((KERN_DEBUG "aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, usg->count));
kfree(usg);
rcode = -ENOMEM;
goto cleanup;
}
sg_user[i] = (void __user *)(uintptr_t)usg->sg[i].addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
if (flags & SRB_DataOut) {
if (copy_from_user(p, sg_user[i],
sg_count[i])) {
kfree (usg);
dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
rcode = -EFAULT;
goto cleanup;
}
}
addr = pci_map_single(dev->pdev, p,
sg_count[i], data_dir);
psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
byte_count += sg_count[i];
psg->sg[i].count = cpu_to_le32(sg_count[i]);
}
kfree (usg);
}
srbcmd->count = cpu_to_le32(byte_count);
if (user_srbcmd->sg.count)
psg->count = cpu_to_le32(sg_indx+1);
else
psg->count = 0;
status = aac_fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
} else {
struct user_sgmap* upsg = &user_srbcmd->sg;
struct sgmap* psg = &srbcmd->sg;
if (actual_fibsize64 == fibsize) {
struct user_sgmap64* usg = (struct user_sgmap64 *)upsg;
for (i = 0; i < upsg->count; i++) {
uintptr_t addr;
void* p;
sg_count[i] = usg->sg[i].count;
if (sg_count[i] >
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
65536)) {
rcode = -EINVAL;
goto cleanup;
}
/* Does this really need to be GFP_DMA? */
p = kmalloc(sg_count[i], GFP_KERNEL|__GFP_DMA);
if (!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, usg->count));
rcode = -ENOMEM;
goto cleanup;
}
addr = (u64)usg->sg[i].addr[0];
addr += ((u64)usg->sg[i].addr[1]) << 32;
sg_user[i] = (void __user *)addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
if (flags & SRB_DataOut) {
if (copy_from_user(p, sg_user[i],
sg_count[i])){
dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
rcode = -EFAULT;
goto cleanup;
}
}
addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
psg->sg[i].addr = cpu_to_le32(addr & 0xffffffff);
byte_count += usg->sg[i].count;
psg->sg[i].count = cpu_to_le32(sg_count[i]);
}
} else {
for (i = 0; i < upsg->count; i++) {
dma_addr_t addr;
void* p;
sg_count[i] = upsg->sg[i].count;
if (sg_count[i] >
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
65536)) {
rcode = -EINVAL;
goto cleanup;
}
p = kmalloc(sg_count[i], GFP_KERNEL);
if (!p) {
dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
sg_count[i], i, upsg->count));
rcode = -ENOMEM;
goto cleanup;
}
sg_user[i] = (void __user *)(uintptr_t)upsg->sg[i].addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
if (flags & SRB_DataOut) {
if (copy_from_user(p, sg_user[i],
sg_count[i])) {
dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
rcode = -EFAULT;
goto cleanup;
}
}
addr = pci_map_single(dev->pdev, p,
sg_count[i], data_dir);
psg->sg[i].addr = cpu_to_le32(addr);
byte_count += sg_count[i];
psg->sg[i].count = cpu_to_le32(sg_count[i]);
}
}
srbcmd->count = cpu_to_le32(byte_count);
if (user_srbcmd->sg.count)
psg->count = cpu_to_le32(sg_indx+1);
else
psg->count = 0;
status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
}
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
if (status == -ERESTARTSYS) {
rcode = -ERESTARTSYS;
goto cleanup;
}
if (status != 0) {
dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n"));
rcode = -ENXIO;
goto cleanup;
}
if (flags & SRB_DataIn) {
for(i = 0 ; i <= sg_indx; i++){
if (copy_to_user(sg_user[i], sg_list[i], sg_count[i])) {
dprintk((KERN_DEBUG"aacraid: Could not copy sg data to user\n"));
rcode = -EFAULT;
goto cleanup;
}
}
}
user_reply = arg + fibsize;
if (is_native_device) {
struct aac_hba_resp *err =
&((struct aac_native_hba *)srbfib->hw_fib_va)->resp.err;
struct aac_srb_reply reply;
reply.status = ST_OK;
if (srbfib->flags & FIB_CONTEXT_FLAG_FASTRESP) {
/* fast response */
reply.srb_status = SRB_STATUS_SUCCESS;
reply.scsi_status = 0;
reply.data_xfer_length = byte_count;
} else {
reply.srb_status = err->service_response;
reply.scsi_status = err->status;
reply.data_xfer_length = byte_count -
le32_to_cpu(err->residual_count);
reply.sense_data_size = err->sense_response_data_len;
memcpy(reply.sense_data, err->sense_response_buf,
AAC_SENSE_BUFFERSIZE);
}
if (copy_to_user(user_reply, &reply,
sizeof(struct aac_srb_reply))) {
dprintk((KERN_DEBUG"aacraid: Copy to user failed\n"));
rcode = -EFAULT;
goto cleanup;
}
} else {
struct aac_srb_reply *reply;
reply = (struct aac_srb_reply *) fib_data(srbfib);
if (copy_to_user(user_reply, reply,
sizeof(struct aac_srb_reply))) {
dprintk((KERN_DEBUG"aacraid: Copy to user failed\n"));
rcode = -EFAULT;
goto cleanup;
}
}
cleanup:
kfree(user_srbcmd);
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
if (rcode != -ERESTARTSYS) {
for (i = 0; i <= sg_indx; i++)
kfree(sg_list[i]);
aac_fib_complete(srbfib);
aac_fib_free(srbfib);
}
return rcode;
}
struct aac_pci_info {
u32 bus;
u32 slot;
};
static int aac_get_pci_info(struct aac_dev* dev, void __user *arg)
{
struct aac_pci_info pci_info;
pci_info.bus = dev->pdev->bus->number;
pci_info.slot = PCI_SLOT(dev->pdev->devfn);
if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) {
dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n"));
return -EFAULT;
}
return 0;
}
static int aac_get_hba_info(struct aac_dev *dev, void __user *arg)
{
struct aac_hba_info hbainfo;
hbainfo.adapter_number = (u8) dev->id;
hbainfo.system_io_bus_number = dev->pdev->bus->number;
hbainfo.device_number = (dev->pdev->devfn >> 3);
hbainfo.function_number = (dev->pdev->devfn & 0x0007);
hbainfo.vendor_id = dev->pdev->vendor;
hbainfo.device_id = dev->pdev->device;
hbainfo.sub_vendor_id = dev->pdev->subsystem_vendor;
hbainfo.sub_system_id = dev->pdev->subsystem_device;
if (copy_to_user(arg, &hbainfo, sizeof(struct aac_hba_info))) {
dprintk((KERN_DEBUG "aacraid: Could not copy hba info\n"));
return -EFAULT;
}
return 0;
}
struct aac_reset_iop {
u8 reset_type;
};
static int aac_send_reset_adapter(struct aac_dev *dev, void __user *arg)
{
struct aac_reset_iop reset;
int retval;
if (copy_from_user((void *)&reset, arg, sizeof(struct aac_reset_iop)))
return -EFAULT;
retval = aac_reset_adapter(dev, 0, reset.reset_type);
return retval;
}
int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
{
int status;
mutex_lock(&dev->ioctl_mutex);
if (dev->adapter_shutdown) {
status = -EACCES;
goto cleanup;
}
/*
* HBA gets first crack
*/
status = aac_dev_ioctl(dev, cmd, arg);
[SCSI] aacraid: fix File System going into read-only mode These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-21 20:09:27 +07:00
if (status != -ENOTTY)
goto cleanup;
switch (cmd) {
case FSACTL_MINIPORT_REV_CHECK:
status = check_revision(dev, arg);
break;
case FSACTL_SEND_LARGE_FIB:
case FSACTL_SENDFIB:
status = ioctl_send_fib(dev, arg);
break;
case FSACTL_OPEN_GET_ADAPTER_FIB:
status = open_getadapter_fib(dev, arg);
break;
case FSACTL_GET_NEXT_ADAPTER_FIB:
status = next_getadapter_fib(dev, arg);
break;
case FSACTL_CLOSE_GET_ADAPTER_FIB:
status = close_getadapter_fib(dev, arg);
break;
case FSACTL_SEND_RAW_SRB:
status = aac_send_raw_srb(dev,arg);
break;
case FSACTL_GET_PCI_INFO:
status = aac_get_pci_info(dev,arg);
break;
case FSACTL_GET_HBA_INFO:
status = aac_get_hba_info(dev, arg);
break;
case FSACTL_RESET_IOP:
status = aac_send_reset_adapter(dev, arg);
break;
default:
status = -ENOTTY;
break;
}
cleanup:
mutex_unlock(&dev->ioctl_mutex);
return status;
}