linux_dsm_epyc7002/drivers/regulator/ab8500-ext.c

395 lines
10 KiB
C
Raw Normal View History

/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
*
* This file is based on drivers/regulator/ab8500.c
*
* AB8500 external regulators
*
* ab8500-ext supports the following regulators:
* - VextSupply3
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
/**
* struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
* @rdev: regulator device
* @is_enabled: status of regulator (on/off)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable and set mode of regulator
* @update_val: bits holding the regulator current mode
* @update_val_en: bits to set EN pin active (LPn pin deactive)
* normally this means high power mode
* @update_val_en_lp: bits to set EN pin active and LPn pin active
* normally this means low power mode
* @delay: startup delay in ms
*/
struct ab8500_ext_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *rdev;
bool is_enabled;
u8 update_bank;
u8 update_reg;
u8 update_mask;
u8 update_val;
u8 update_val_en;
u8 update_val_en_lp;
};
static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, info->update_val);
if (ret < 0)
dev_err(rdev_get_dev(info->rdev),
"couldn't set enable bits for regulator\n");
info->is_enabled = true;
dev_dbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value):"
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, info->update_val);
return ret;
}
static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
{
int ret;
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, 0x0);
if (ret < 0)
dev_err(rdev_get_dev(info->rdev),
"couldn't set disable bits for regulator\n");
info->is_enabled = false;
dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):"
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, 0x0);
return ret;
}
static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev)
{
int ret;
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
ret = abx500_get_register_interruptible(info->dev,
info->update_bank, info->update_reg, &regval);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't read 0x%x register\n", info->update_reg);
return ret;
}
dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):"
" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, regval);
if (regval & info->update_mask)
info->is_enabled = true;
else
info->is_enabled = false;
return info->is_enabled;
}
static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
int ret = 0;
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
switch (mode) {
case REGULATOR_MODE_NORMAL:
info->update_val = info->update_val_hp;
break;
case REGULATOR_MODE_IDLE:
info->update_val = info->update_val_lp;
break;
default:
return -EINVAL;
}
if (info->is_enabled) {
u8 regval;
ret = enable(info, &regval);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"Could not set regulator mode.\n");
dev_dbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
"0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, regval);
}
return ret;
}
static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
{
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
if (info->update_val == info->update_val_hp)
ret = REGULATOR_MODE_NORMAL;
else if (info->update_val == info->update_val_lp)
ret = REGULATOR_MODE_IDLE;
else
ret = -EINVAL;
return ret;
}
static int ab8500_ext_fixed_get_voltage(struct regulator_dev *rdev)
{
struct regulation_constraints *regu_constraints = rdev->constraints;
if (regu_constraints == NULL) {
dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
return -EINVAL;
}
if (regu_constraints->min_uV && regu_constraints->max_uV) {
if (regu_constraints->min_uV == regu_constraints->max_uV)
return regu_constraints->min_uV;
}
return -EINVAL;
}
static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
struct regulation_constraints *regu_constraints = rdev->constraints;
if (regu_constraints == NULL) {
dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
return -EINVAL;
}
/* return the uV for the fixed regulators */
if (regu_constraints->min_uV && regu_constraints->max_uV) {
if (regu_constraints->min_uV == regu_constraints->max_uV)
return regu_constraints->min_uV;
}
return -EINVAL;
}
static struct regulator_ops ab8500_ext_regulator_ops = {
.enable = ab8500_ext_regulator_enable,
.disable = ab8500_ext_regulator_disable,
.is_enabled = ab8500_ext_regulator_is_enabled,
.set_mode = ab8500_ext_regulator_set_mode,
.get_mode = ab8500_ext_regulator_get_mode,
.get_voltage = ab8500_ext_fixed_get_voltage,
.list_voltage = ab8500_ext_list_voltage,
};
static struct ab8500_ext_regulator_info
ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = {
[AB8500_EXT_SUPPLY1] = {
.desc = {
.name = "VEXTSUPPLY1",
.ops = &ab8500_ext_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_EXT_SUPPLY1,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.update_bank = 0x04,
.update_reg = 0x08,
.update_mask = 0x03,
.update_val = 0x01,
.update_val_hp = 0x01,
.update_val_lp = 0x03,
.update_val_hw = 0x02,
},
[AB8500_EXT_SUPPLY2] = {
.desc = {
.name = "VEXTSUPPLY2",
.ops = &ab8500_ext_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_EXT_SUPPLY2,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.update_bank = 0x04,
.update_reg = 0x08,
.update_mask = 0x0c,
.update_val = 0x04,
.update_val_hp = 0x04,
.update_val_lp = 0x0c,
.update_val_hw = 0x08,
},
[AB8500_EXT_SUPPLY3] = {
.desc = {
.name = "VEXTSUPPLY3",
.ops = &ab8500_ext_regulator_ops,
.type = REGULATOR_VOLTAGE,
.id = AB8500_EXT_SUPPLY3,
.owner = THIS_MODULE,
.n_voltages = 1,
},
.update_bank = 0x04,
.update_reg = 0x08,
.update_mask = 0x30,
.update_val = 0x10,
.update_val_en = 0x10,
.update_val_en_lp = 0x30,
},
};
int ab8500_ext_regulator_init(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
struct regulator_config config = { };
int i, err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
return -EINVAL;
}
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
return -EINVAL;
}
pdata = ppdata->regulator;
if (!pdata) {
dev_err(&pdev->dev, "null pdata\n");
return -EINVAL;
}
/* make sure the platform data has the correct size */
if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* check for AB8500 2.x */
if (abx500_get_chip_id(&pdev->dev) < 0x30) {
struct ab8500_ext_regulator_info *info;
/* VextSupply3LPn is inverted on AB8500 2.x */
info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
info->update_val = 0x30;
info->update_val_en = 0x30;
info->update_val_en_lp = 0x10;
}
/* register all regulators */
for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
struct ab8500_ext_regulator_info *info = NULL;
/* assign per-regulator data */
info = &ab8500_ext_regulator_info[i];
info->dev = &pdev->dev;
config.dev = &pdev->dev;
config.init_data = &pdata->ext_regulator[i];
config.driver_data = info;
/* register regulator with framework */
info->rdev = regulator_register(&info->desc, &config);
if (IS_ERR(info->rdev)) {
err = PTR_ERR(info->rdev);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--i >= 0) {
info = &ab8500_ext_regulator_info[i];
regulator_unregister(info->rdev);
}
return err;
}
dev_dbg(rdev_get_dev(info->rdev),
"%s-probed\n", info->desc.name);
}
return 0;
}
int ab8500_ext_regulator_exit(struct platform_device *pdev)
{
int i;
for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
struct ab8500_ext_regulator_info *info = NULL;
info = &ab8500_ext_regulator_info[i];
dev_vdbg(rdev_get_dev(info->rdev),
"%s-remove\n", info->desc.name);
regulator_unregister(info->rdev);
}
return 0;
}
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
MODULE_DESCRIPTION("AB8500 external regulator driver");
MODULE_ALIAS("platform:ab8500-ext-regulator");