AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-17 19:46:44 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
dce45af5c2
linux_dsm_epyc7002/drivers/counter/Kconfig

61 lines
1.8 KiB
Plaintext
Raw Normal View History

counter: Introduce the Generic Counter interface This patch introduces the Generic Counter interface for supporting counter devices. In the context of the Generic Counter interface, a counter is defined as a device that reports one or more "counts" based on the state changes of one or more "signals" as evaluated by a defined "count function." Driver callbacks should be provided to communicate with the device: to read and write various Signals and Counts, and to set and get the "action mode" and "count function" for various Synapses and Counts respectively. To support a counter device, a driver must first allocate the available Counter Signals via counter_signal structures. These Signals should be stored as an array and set to the signals array member of an allocated counter_device structure before the Counter is registered to the system. Counter Counts may be allocated via counter_count structures, and respective Counter Signal associations (Synapses) made via counter_synapse structures. Associated counter_synapse structures are stored as an array and set to the the synapses array member of the respective counter_count structure. These counter_count structures are set to the counts array member of an allocated counter_device structure before the Counter is registered to the system. A counter device is registered to the system by passing the respective initialized counter_device structure to the counter_register function; similarly, the counter_unregister function unregisters the respective Counter. The devm_counter_register and devm_counter_unregister functions serve as device memory-managed versions of the counter_register and counter_unregister functions respectively. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:36 +07:00
#
# Counter devices
#
menuconfig COUNTER
tristate "Counter support"
help
This enables counter device support through the Generic Counter
interface. You only need to enable this, if you also want to enable
one or more of the counter device drivers below.
counter: 104-quad-8: Add Generic Counter interface support This patch adds support for the Generic Counter interface to the 104-QUAD-8 driver. The existing 104-QUAD-8 device interface should not be affected by this patch; all changes are intended as supplemental additions as perceived by the user. Generic Counter Counts are created for the eight quadrature channel counts, as well as their respective quadrature A and B Signals (which are associated via respective Synapse structures) and respective index Signals. The new Generic Counter interface sysfs attributes are intended to expose the same functionality and data available via the existing 104-QUAD-8 IIO device interface; the Generic Counter interface serves to provide the respective functionality and data in a standard way expected of counter devices. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:40 +07:00
if COUNTER
config 104_QUAD_8
tristate "ACCES 104-QUAD-8 driver"
depends on PC104 && X86 && IIO
select ISA_BUS_API
help
Say yes here to build support for the ACCES 104-QUAD-8 quadrature
encoder counter/interface device family (104-QUAD-8, 104-QUAD-4).
A counter's respective error flag may be cleared by performing a write
operation on the respective count value attribute. Although the
104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be
set, either directly or via the counter's preset attribute. Interrupts
are not supported by this driver.
The base port addresses for the devices may be configured via the base
array module parameter.
counter: Add STM32 Timer quadrature encoder Implement counter part of the STM32 timer hardware block by using counter API. Hardware only supports X2 and X4 quadrature modes. A ceiling value can be set to define the maximum value reachable by the counter. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Co-authored-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:42 +07:00
config STM32_TIMER_CNT
tristate "STM32 Timer encoder counter driver"
depends on MFD_STM32_TIMERS || COMPILE_TEST
help
Select this option to enable STM32 Timer quadrature encoder
and counter driver.
To compile this driver as a module, choose M here: the
module will be called stm32-timer-cnt.
counter: stm32-lptimer: add counter device Add support for new counter device to stm32-lptimer. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:44 +07:00
config STM32_LPTIMER_CNT
tristate "STM32 LP Timer encoder counter driver"
depends on (MFD_STM32_LPTIMER || COMPILE_TEST) && IIO
help
Select this option to enable STM32 Low-Power Timer quadrature encoder
and counter driver.
To compile this driver as a module, choose M here: the
module will be called stm32-lptimer-cnt.
counter: add FlexTimer Module Quadrature decoder counter driver This driver exposes the counter for the quadrature decoder of the FlexTimer Module, present in the LS1021A soc. Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:51 +07:00
config FTM_QUADDEC
tristate "Flex Timer Module Quadrature decoder driver"
help
Select this option to enable the Flex Timer Quadrature decoder
driver.
To compile this driver as a module, choose M here: the
module will be called ftm-quaddec.
counter: 104-quad-8: Add Generic Counter interface support This patch adds support for the Generic Counter interface to the 104-QUAD-8 driver. The existing 104-QUAD-8 device interface should not be affected by this patch; all changes are intended as supplemental additions as perceived by the user. Generic Counter Counts are created for the eight quadrature channel counts, as well as their respective quadrature A and B Signals (which are associated via respective Synapse structures) and respective index Signals. The new Generic Counter interface sysfs attributes are intended to expose the same functionality and data available via the existing 104-QUAD-8 IIO device interface; the Generic Counter interface serves to provide the respective functionality and data in a standard way expected of counter devices. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-02 13:30:40 +07:00
endif # COUNTER
Reference in New Issue Copy Permalink