linux_dsm_epyc7002/drivers/net/ixgbe/ixgbe_dcb_82599.c

347 lines
9.7 KiB
C
Raw Normal View History

/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
Copyright(c) 1999 - 2011 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information:
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#include "ixgbe.h"
#include "ixgbe_type.h"
#include "ixgbe_dcb.h"
#include "ixgbe_dcb_82599.h"
/**
* ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
* @hw: pointer to hardware structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Rx Packet Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *bwg_id,
u8 *prio_type,
u8 *prio_tc)
{
u32 reg = 0;
u32 credit_refill = 0;
u32 credit_max = 0;
u8 i = 0;
/*
* Disable the arbiter before changing parameters
* (always enable recycle mode; WSP)
*/
reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
/* Map all traffic classes to their UP, 1 to 1 */
reg = 0;
for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
reg |= (prio_tc[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
credit_refill = refill[i];
credit_max = max[i];
reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
if (prio_type[i] == prio_link)
reg |= IXGBE_RTRPT4C_LSP;
IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
}
/*
* Configure Rx packet plane (recycle mode; WSP) and
* enable arbiter
*/
reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
return 0;
}
/**
* ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
* @hw: pointer to hardware structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Tx Descriptor Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *bwg_id,
u8 *prio_type)
{
u32 reg, max_credits;
u8 i;
/* Clear the per-Tx queue credits; we use per-TC instead */
for (i = 0; i < 128; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
}
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
max_credits = max[i];
reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
reg |= refill[i];
reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
if (prio_type[i] == prio_group)
reg |= IXGBE_RTTDT2C_GSP;
if (prio_type[i] == prio_link)
reg |= IXGBE_RTTDT2C_LSP;
IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
}
/*
* Configure Tx descriptor plane (recycle mode; WSP) and
* enable arbiter
*/
reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
return 0;
}
/**
* ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
* @hw: pointer to hardware structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
*
* Configure Tx Packet Arbiter and credits for each traffic class.
*/
s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
u16 *refill,
u16 *max,
u8 *bwg_id,
u8 *prio_type,
u8 *prio_tc)
{
u32 reg;
u8 i;
/*
* Disable the arbiter before changing parameters
* (always enable recycle mode; SP; arb delay)
*/
reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
(IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
IXGBE_RTTPCS_ARBDIS;
IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
/* Map all traffic classes to their UP, 1 to 1 */
reg = 0;
for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
reg |= (prio_tc[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
/* Configure traffic class credits and priority */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
reg = refill[i];
reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
if (prio_type[i] == prio_group)
reg |= IXGBE_RTTPT2C_GSP;
if (prio_type[i] == prio_link)
reg |= IXGBE_RTTPT2C_LSP;
IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
}
/*
* Configure Tx packet plane (recycle mode; SP; arb delay) and
* enable arbiter
*/
reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
(IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
return 0;
}
/**
* ixgbe_dcb_config_pfc_82599 - Configure priority flow control
* @hw: pointer to hardware structure
* @pfc_en: enabled pfc bitmask
*
* Configure Priority Flow Control (PFC) for each traffic class.
*/
s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
{
u32 i, reg, rx_pba_size;
/* Configure PFC Tx thresholds per TC */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
int enabled = pfc_en & (1 << i);
ixgbe: DCB set PFC high and low water marks per data sheet specs Currently the high and low water marks for PFC are being set conservatively for jumbo frames. This means the RX buffers are being underutilized in the default 1500 MTU. This patch fixes this so that the water marks are set as described in the data sheet considering the MTU size. The equation used is, RTT * 1.44 + MTU * 1.44 + MTU Where RTT is the round trip time and MTU is the max frame size in KB. To avoid floating point arithmetic FC_HIGH_WATER is defined ((((RTT + MTU) * 144) + 99) / 100) + MTU This changes how the hardware field fc.low_water and fc.high_water are used. With this change they are no longer storing the actual low water and high water markers but are storing the required head room in the buffer. This simplifies the logic and we do not need to account for the size of the buffer when setting the thresholds. Testing with iperf and 16 threads showed a slight uptick in throughput over a single traffic class .1-.2Gbps and a reduction in pause frames. Without the patch a 30 second run would show ~10-15 pause frames being transmitted with the patch ~2-5 are seen. Test were run back to back with 82599. Note RXPBSIZE is in KB and low and high water marks fields are also in KB. However the FCRT* registers are 32B granularity and right shifted 5 into the register, (((rx_pbsize - water_mark) * 1024) / 32) << 5 is the most explicit conversion here we simplify (rx_pbsize - water_mark) * 32 << 5 = (rx_pbsize - water_mark) << 10 This patch updates the PFC thresholds and legacy FC thresholds. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-17 10:26:44 +07:00
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
reg = (rx_pba_size - hw->fc.low_water) << 10;
if (enabled)
reg |= IXGBE_FCRTL_XONE;
IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
ixgbe: DCB set PFC high and low water marks per data sheet specs Currently the high and low water marks for PFC are being set conservatively for jumbo frames. This means the RX buffers are being underutilized in the default 1500 MTU. This patch fixes this so that the water marks are set as described in the data sheet considering the MTU size. The equation used is, RTT * 1.44 + MTU * 1.44 + MTU Where RTT is the round trip time and MTU is the max frame size in KB. To avoid floating point arithmetic FC_HIGH_WATER is defined ((((RTT + MTU) * 144) + 99) / 100) + MTU This changes how the hardware field fc.low_water and fc.high_water are used. With this change they are no longer storing the actual low water and high water markers but are storing the required head room in the buffer. This simplifies the logic and we do not need to account for the size of the buffer when setting the thresholds. Testing with iperf and 16 threads showed a slight uptick in throughput over a single traffic class .1-.2Gbps and a reduction in pause frames. Without the patch a 30 second run would show ~10-15 pause frames being transmitted with the patch ~2-5 are seen. Test were run back to back with 82599. Note RXPBSIZE is in KB and low and high water marks fields are also in KB. However the FCRT* registers are 32B granularity and right shifted 5 into the register, (((rx_pbsize - water_mark) * 1024) / 32) << 5 is the most explicit conversion here we simplify (rx_pbsize - water_mark) * 32 << 5 = (rx_pbsize - water_mark) << 10 This patch updates the PFC thresholds and legacy FC thresholds. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-11-17 10:26:44 +07:00
reg = (rx_pba_size - hw->fc.high_water) << 10;
if (enabled)
reg |= IXGBE_FCRTH_FCEN;
IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
}
if (pfc_en) {
/* Configure pause time (2 TCs per register) */
reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
/* Configure flow control refresh threshold value */
IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
reg = IXGBE_FCCFG_TFCE_PRIORITY;
IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg);
/*
* Enable Receive PFC
* 82599 will always honor XOFF frames we receive when
* we are in PFC mode however X540 only honors enabled
* traffic classes.
*/
reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
reg &= ~IXGBE_MFLCN_RFCE;
reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
if (hw->mac.type == ixgbe_mac_X540)
reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
} else {
for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
hw->mac.ops.fc_enable(hw, i);
}
return 0;
}
/**
* ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
* @hw: pointer to hardware structure
*
* Configure queue statistics registers, all queues belonging to same traffic
* class uses a single set of queue statistics counters.
*/
static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
{
u32 reg = 0;
u8 i = 0;
/*
* Receive Queues stats setting
* 32 RQSMR registers, each configuring 4 queues.
* Set all 16 queues of each TC to the same stat
* with TC 'n' going to stat 'n'.
*/
for (i = 0; i < 32; i++) {
reg = 0x01010101 * (i / 4);
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
}
/*
* Transmit Queues stats setting
* 32 TQSM registers, each controlling 4 queues.
* Set all queues of each TC to the same stat
* with TC 'n' going to stat 'n'.
* Tx queues are allocated non-uniformly to TCs:
* 32, 32, 16, 16, 8, 8, 8, 8.
*/
for (i = 0; i < 32; i++) {
if (i < 8)
reg = 0x00000000;
else if (i < 16)
reg = 0x01010101;
else if (i < 20)
reg = 0x02020202;
else if (i < 24)
reg = 0x03030303;
else if (i < 26)
reg = 0x04040404;
else if (i < 28)
reg = 0x05050505;
else if (i < 30)
reg = 0x06060606;
else
reg = 0x07070707;
IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
}
return 0;
}
/**
* ixgbe_dcb_hw_config_82599 - Configure and enable DCB
* @hw: pointer to hardware structure
* @refill: refill credits index by traffic class
* @max: max credits index by traffic class
* @bwg_id: bandwidth grouping indexed by traffic class
* @prio_type: priority type indexed by traffic class
* @pfc_en: enabled pfc bitmask
*
* Configure dcb settings and enable dcb mode.
*/
s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
u16 *max, u8 *bwg_id, u8 *prio_type, u8 *prio_tc)
{
ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
prio_type, prio_tc);
ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
bwg_id, prio_type);
ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
bwg_id, prio_type, prio_tc);
ixgbe_dcb_config_pfc_82599(hw, pfc_en);
ixgbe_dcb_config_tc_stats_82599(hw);
return 0;
}